After installing a ROM & Gapps, my Samsung Galaxy Note 10.1 3G & WiFi (N8000) boots into the initial setup but Clock, Calendar, Google Services Framework keeps stopping, can't complete the setup or do anything else.
Initially flashed Resurrection Remix Nougat v.5.8.5 ROM on the GT-N8000 with same steps as below without any issues, the initial setup and all google apps worked flawlessly but a day or so later was greeted with "Encryption unsuccessful" error upon booting. Went into TWRP, wiped everything, changed File system for Cache, System and Data from EXT4 to FAT, flashed ROM again with steps below, restarted and got stuck in the ROM's loading logo, loads/loops infinitely (waited over half an hour). Went back and changed back FAT to EXT4, flashed ROM again and this time it successfully got past the logo but started getting the Google framework stopping error.. someone please tell me there's something that can be done..
Steps I take
Boot into recovery TWRP 3.4.0-0
Wipe > Format Data & Factory Reset
Advanced Wipe > Wipe everything
Install ROM
Wipe Cache & Dalvik
Install Gapps
Wipe Cache & Dalvik
No errors during either of the installations, click Reboot into system
Loads into setup wizard, Google Services Framework keeps stopping continuously
Installing from Internal memory, no sd card. Installation process: https://imgur.com/a/zibaMTw
Have tried Current & Older releases of gapps (ARM-7.1-pico/nano) with multiple different downloads, same result
Cache - EXT4
System - EXT4
Data - EXT4
Micro SD card (N/A) - VFAT
USB OTG - VFAT
Have tried these ROMs with multiple downloads, same result
Resurrection Remix Nougat v.5.8.5
Slimroms Slim7
LineageOS 14.1 Nougat
Have no idea what to do at this point, anyone has a solution?
Thank you
SOLVED, read below
Solved
For those who may experience similar issue..
Downloaded Stock ROM N8000XXUDNE5_N8000OLBDNE3_XXV , Flashed with ODIN, rebooted and successfully got through with no google errors and worked without any issues.
Then started everything from beginning, Installed TWRP 3.4.0 with Odin, booted into Odin recovery, did all the format data, advanced wiped everything
Downloaded Slimroms Slim7 and latest Gapps ARM > 7.1 > pico put it on internal storage, Installed Slim7 ROM > Wipe Cache & Dalvik > Installed Gapps > Wipe Cache & Dalvik, rebooted back into system and got to setup wizard with no errors, was able to set it up and it's working perfectly now..
In short just had to flash back to stock rom and start the custom rom install from the beginning.
Here's to hoping I don't get another "Encryption unsuccessful" error in a day or so..
Related
I had Cyanogenmod 10.1
I flashed CM10 alpha 5
I had no format dbdata option so formatted data
installed GAPPS
after booting I get "AOSP KEYBOARD HAS STOPPED"
please help!
Note: I do not have a backup of third party keyboard in my internal storage, but have on my external storage.
found a solution!
finally found a solution!
1. reboot to recovery mode
2. wipe data/factory reset
3. advanced > wipe dalvik cache
3. install cm 10
4. install Gapps (both downloads provided by dhiru in CM10 thread)
hit Thanks if it helped!
I need help to Increase my HTC Explorer's internal memory using Mounts2sd. to be precise I am stating below what methods I have already tried :-
NOTE: I have already rooted my device and already installed TWRP Recovery ( I have also tried below mentioned methods on CWM recovery too)
1: First I booted into recovery and did a factory reset, wiped cache, wiped data, wiped dalvick cache, wiped system etc.
2: after that I partitioned my sd card through recovery ( partition size 1gb, swap 0)
3: Then I installed cm 10
4: rebooted into system
5: Rebooted again into recovery
6: installed gapps package for cm 10
7: rebooted again into system
8: Then I installed mounts2sd from playstore.
9: opened mounts2sd a screen appeared asking to configure busybox and ti install init.d startup script.
10: I tried both but both failed with errors.
SECOND METHOD
1: First I booted into recovery and did a factory reset, wiped cache, wiped data, wiped dalvick cache, wiped system etc.
3: Then I installed cm 10
4: rebooted into system
4: installed mounts2sd NOTE : This time I did not flashe gapps yet.
5: opened mounts2sd and configured busybox successfully and also installed init.d script successfully.
6: configured mounts2sd
7: Rebooted system android system upgraded
8: upon checking internal memory was increased to 1gb.
9: rebooted into recovery
10: flashed gapps
11: rebooted and again that android upgrading screen appeared with optimizing apps 1 of 20
12: but after that process was completed the CyanogenMod Loading screen reappeared instead of going into system. and that screen never ends until i remove battery.
Kindly guide me through this issue and let me know how can I increase internal memory and at the same time I also want to use gapps too. Developers are humbly requested to plz solve this issue for me
Thanks.
NOTE: I have also tried different ROMs too and nothing helped.
Hello,
I am currently triying to make a clean installation of CM12. I wiped cache, dalvik..., data and a format via TWRP. Then installed current nightly. After first boot I get dozens of error messages that processes stopped. And: "unfortunately, Setup Wizardstopped." I am not able to us the tablet because of those error messages...
What did I wrong? Thought a wipe cache, dalvik... data and a format is enogh to make a clean installation?!
Now it seems to work. Could it be, that data (like folder Android) on my SD Card caused the problems? I removed the android folder on my card and wiped it again....
I have installed Philz Touch 6 and installed ROM cm-12.1-20151201-0012-UNOFFICIAL-p5110.zip from Andi and have tried a using the GAPPS Lollipop Base Gapps package for 5.1.1: gapps-511-base-20151205-1-signed.zip and when I do a reboot I get a bunch of google error messages.
Copy GApps and CM-Rom ZIPs to your internal SDCard (this works)
Boot into Recovery (this works)
wipe data factory reset (I go into this folder and there are two options I am not sure which one to select)
wipe cache (this works)
wipe dalvic cache (this works in the advanced tab)
format system
Flash CM-Rom ZIP from internal SDCard (this works)
Flash GApps zip from internal SDCard (this seems to work but I am not certain)
Reboot
no gapps installed
I tried a different approach and only installed the CM ROM and no gapps.
I have tried about 10 different gapps and none of them work with the latest build on my TAB 2 10.1 P5113.
With the ROM only everything seems stable.
have you tried : http://opengapps.org/
I install ResurrectionRemix M v5.7.2 and gapps 6.0 to my phone through TWRP. it was good. But later i decided to install AospExtended-v3.1 . I took the zip file into my USB Removable disk as my phone didn't have any external storage so that i could install it with the help of OTG cable!
I install AospExtended-v3.1 and gapps 7.1 successfully from TWRP recovery . when it is 'done' i tapped on 'Reboot to system'. I don't know why, my phone goes into bootloop though i installed various ROMS in this process but i wasn't face this problem before!
Anyway then i wiped all data and decided to go back to my previous ROM. I Installed ResurrectionRemix M v5.7.2 through TWRP. it was installed successfully and i thought now that looping problem will resolve, but after successful completion of installing ResurrectionRemix M v5.7.2 when i reboot to system there still the bootloop problem!
Then i though i should go back to my STOCK ROM. I download MIUI 6.7.5_5.0_global fastboot ROM and using miflash tool with proper ADB drivers installed i flash my phone. It was again completed successfully, then i thought this time the bootloop problem will resolve! But no! My phone still stuck into bootloop.
whatever installing process(TWRP/Fastboot) i followed, i am unable to solve this Strange bootloop issue! What should I do?
i am also facing this problem,wht i do i cant understand,pls anyone hlp me to take out from this situation
Try these.
1. Boot into twrp
2. Wipe System, Data, dalvik, cache ( Don't wipe system storage )
3. Connect USB disk
4. Copy desired ROM into internal storage using the file manager given in TWRP.
5. Flash ROM locating the zip in internal storage.
6. Wipe Cache/Dalvik.
Your phone should now boot successfully.
madhurajkumar said:
Try these.
1. Boot into twrp
2. Wipe System, Data, dalvik, cache ( Don't wipe system storage )
3. Connect USB disk
4. Copy desired ROM into internal storage using the file manager given in TWRP.
5. Flash ROM locating the zip in internal storage.
6. Wipe Cache/Dalvik.
Your phone should now boot successfully.
Click to expand...
Click to collapse
I tried this process, but this doesn't work!
try returning to stock MIUI
follow this thread
https://forum.xda-developers.com/mi-4i/help/solved-mi4i-continuous-reboot-issue-t3537896