Related
I purchased my S8 from Samsung official website, and the model is G950U1.
Becuase the terrible indoor signal, I have to enable the wifi calling. But the original firmware does not support me to enable because it is not recognized as AT&T Galaxy S8.
I tried to flash the ROM and somehow the CSC changed from XAA to VZW. And the starting logo became Verizon logo.
So how to fix?
After paying a visit to AT&T store, I know the correct firmware should be G950USQU1AQGL. But you could not find it anywhere. So I take a step back to flash the ROM G950USQS1AQF7 and problem solved.
Most important tips:
If your CSC is not ATT and the model is G950U1, using SamFirm to download and flash that ROM first. After correct the CSC to ATT, then flash ROM G950USQS1AQF7.
If you get any problem in flashing ROM, use Odin PriceComsy.
Did you just flash the VAC or HOME_CSC or just the User Files? I still don't WANT the ATT bloatware.
Sent from my SM-N950U using Tapatalk
R0ckPanda said:
I purchased my S8 from Samsung official website, and the model is G950U1.
Becuase the terrible indoor signal, I have to enable the wifi calling. But the original firmware does not support me to enable because it is not recognized as AT&T Galaxy S8.
I tried to flash the ROM and somehow the CSC changed from XAA to VZW. And the starting logo became Verizon logo.
So how to fix?
After paying a visit to AT&T store, I know the correct firmware should be G950USQU1AQGL. But you could not find it anywhere. So I take a step back to flash the ROM G950USQS1AQF7 and problem solved.
Most important tips:
If your CSC is not ATT and the model is G950U1, using SamFirm to download and flash that ROM first. After correct the CSC to ATT, then flash ROM G950USQS1AQF7.
If you get any problem in flashing ROM, use Odin PriceComsy.
Click to expand...
Click to collapse
let me correct: even I could see the option to enable the wifi calling. It does not work. And I called the AT&T service, the answer is the AT&T system considers this device not an AT&T original device and can not enable HD Voice and therefore cannot enable the wifi calling.
So the conclusion is, if you want an unlocked phone with WIFI calling, go iPhone!
R0ckPanda said:
let me correct: even I could see the option to enable the wifi calling. It does not work. And I called the AT&T service, the answer is the AT&T system considers this device not an AT&T original device and can not enable HD Voice and therefore cannot enable the wifi calling.
So the conclusion is, if you want an unlocked phone with WIFI calling, go iPhone!
Click to expand...
Click to collapse
I have read other treads and some people went to ATT store and recorded IMEI form another Galaxy s8, then called customer support and they have added that IMEI to the users account.
Charkatak said:
I have read other treads and some people went to ATT store and recorded IMEI form another Galaxy s8, then called customer support and they have added that IMEI to the users account.
Click to expand...
Click to collapse
Doing the above will get the volte working, but not wifi calling on ATT. ATT is actively checking the imei of the phone being used to allow wifi calling. If you want wifi calling to work on ATT you need an ATT branded phone or an Iphone.
gschroer said:
Doing the above will get the volte working, but not wifi calling on ATT. ATT is actively checking the imei of the phone being used to allow wifi calling. If you want wifi calling to work on ATT you need an ATT branded phone or an Iphone.
Click to expand...
Click to collapse
Im having a similar issue.. on USA ATT, have 950U1.. cant enable volte/hd calling which they say is needed for s3 watch numbersync.. i mentioned the card swap trick to get hd voice working and numbersync, they claim the system will do a sweep every so often and disable the feature even if you do this (so both numbersync and hd voice would then fail eventually)
---------- Post added at 01:08 PM ---------- Previous post was at 01:07 PM ----------
R0ckPanda said:
let me correct: even I could see the option to enable the wifi calling. It does not work. And I called the AT&T service, the answer is the AT&T system considers this device not an AT&T original device and can not enable HD Voice and therefore cannot enable the wifi calling.
So the conclusion is, if you want an unlocked phone with WIFI calling, go iPhone!
Click to expand...
Click to collapse
So your flashing didnt enable hd voice i take it, in the end?
One att rep recommended going to the samsung experience store and flashing with att firmware/bloatware.. but then another rep said this wouldnt work. Did this csc flash involve wiping the phone too?
markm75 said:
Im having a similar issue.. on USA ATT, have 950U1.. cant enable volte/hd calling which they say is needed for s3 watch numbersync.. i mentioned the card swap trick to get hd voice working and numbersync, they claim the system will do a sweep every so often and disable the feature even if you do this (so both numbersync and hd voice would then fail eventually)
---------- Post added at 01:08 PM ---------- Previous post was at 01:07 PM ----------
So your flashing didnt enable hd voice i take it, in the end?
One att rep recommended going to the samsung experience store and flashing with att firmware/bloatware.. but then another rep said this wouldnt work. Did this csc flash involve wiping the phone too?
Click to expand...
Click to collapse
Not sure what you mean by "card swap"? You need to get an imei from an ATT branded S8 phone. Call and say you got a new phone and need to update your account and them give them the ATT branded phone's imei. You do not need the sim card from the ATT branded phone. This will give you an account with advanced calling features, that includes VoLte. They will not remove the advanced calling features from your account based on the phone you are actively using. I've been using the same imei from an ATT floor model phone on four lines for over five years and after using many different phones they have never changed the original account. You also need to flash the phone with ATT firmware. This will allow you to use VoLte and it will continue to work unless your call them and change your account to one that doesn't have advanced calling features.
gschroer said:
Not sure what you mean by "card swap"? You need to get an imei from an ATT branded S8 phone. Call and say you got a new phone and need to update your account and them give them the ATT branded phone's imei. You do not need the sim card from the ATT branded phone. This will give you an account with advanced calling features, that includes VoLte. They will not remove the advanced calling features from your account based on the phone you are actively using. I've been using the same imei from an ATT floor model phone on four lines for over five years and after using many different phones they have never changed the original account. You also need to flash the phone with ATT firmware. This will allow you to use VoLte and it will continue to work unless your call them and change your account to one that doesn't have advanced calling features.
Click to expand...
Click to collapse
Thanks for the reply.. i thought maybe i could borrow a friends phone, put my att sim card in his.. activate numbersync and maybe call att to enable the advanced features (or is it automatic).. then put the card back in my s8.. att seems to suggest the system would do a sweep and tag the imei as non att and it would deactivate.
i've not considered i could do the give them a branded imei number? how would that work, if someone else claimed that phone then there would be trouble and a conflict..
From this other thread, this one person so far, seems to suggest that flashing with the firmware (verizon?) made theirs work, but i'm not clear on the details on what steps to take to do the actual flash, i think its as simple as maybe some version of odin plus the firmware file but unsure.. they did not do a branded att phone imei number and their volte is working.. i guess this carrier flash takes care of it somehow (but even att told me it would work, then retracted and said no it wouldnt, so who knows).
Hi,
I was recently gifted an unlocked ATT S8+ (SM-G955U) which I'm trying to activate to my Verizon account. I've read conflicting information about this, and after going to the Verizon store and calling them directly I'm thoroughly confused.
The rep on the phone told me that the phone is "incompatible" with their network based on the IMEI number. From what I gather, the hardware (and model numbers) on all the major carrier's S8+s are the same and simply have different firmware. I've also read that they're interchangeable. Has anyone successfully gotten the ATT S8+ on Verizon? I'm almost feeling like it's something where I would need to jump through more hoops and speak to a manager to get them to do it, but before I did I wanted to get others input. Thanks!
I heard that the phone will work, you'll need to flash the Verizon firmware onto the AT&T phone.
Thanks Richie. Do you think that Verizon is telling me that the IMEI is "incompatible" because I may need to flash another firmware to enable CDMA? Or are some versions of the S4+ really incompatible on their network.
May there be possible success to get them to activate it anyway?
kebas239 said:
Hi,
I was recently gifted an unlocked ATT S8+ (SM-G955U) which I'm trying to activate to my Verizon account. I've read conflicting information about this, and after going to the Verizon store and calling them directly I'm thoroughly confused.
The rep on the phone told me that the phone is "incompatible" with their network based on the IMEI number. From what I gather, the hardware (and model numbers) on all the major carrier's S8+s are the same and simply have different firmware. I've also read that they're interchangeable. Has anyone successfully gotten the ATT S8+ on Verizon? I'm almost feeling like it's something where I would need to jump through more hoops and speak to a manager to get them to do it, but before I did I wanted to get others input. Thanks!
Click to expand...
Click to collapse
kebas239 said:
Thanks Richie. Do you think that Verizon is telling me that the IMEI is "incompatible" because I may need to flash another firmware to enable CDMA? Or are some versions of the S4+ really incompatible on their network.
May there be possible success to get them to activate it anyway?
Click to expand...
Click to collapse
Do you already have an active Verizon SIM card? Like in another phone?
Mr. Orange 645 said:
Do you already have an active Verizon SIM card? Like in another phone?
Click to expand...
Click to collapse
I do not - only because I'm coming from an S4 (which has the larger SIM card). I had to get a new one.
kebas239 said:
Hi,
I was recently gifted an unlocked ATT S8+ (SM-G955U) which I'm trying to activate to my Verizon account. I've read conflicting information about this, and after going to the Verizon store and calling them directly I'm thoroughly confused.
The rep on the phone told me that the phone is "incompatible" with their network based on the IMEI number. From what I gather, the hardware (and model numbers) on all the major carrier's S8+s are the same and simply have different firmware. I've also read that they're interchangeable. Has anyone successfully gotten the ATT S8+ on Verizon? I'm almost feeling like it's something where I would need to jump through more hoops and speak to a manager to get them to do it, but before I did I wanted to get others input. Thanks!
Click to expand...
Click to collapse
The IMEI thing and Verizon not provisioning your phone to activate on their network is the ONLY obstacle you have.
All the US S8/S8+/Note8 variants are identical and can be cross-flashed to whatever carrier you want. You can easily grab the VZW firmware and flash it on to your AT&T device, fully converting it, however the IMEI won't be in Verizon's system since your particular phone wasn't sold by Verizon.
Somehow get around that and your phone will be fully compatible on VZWs network.
kebas239 said:
Thanks Richie. Do you think that Verizon is telling me that the IMEI is "incompatible" because I may need to flash another firmware to enable CDMA? Or are some versions of the S4+ really incompatible on their network.
May there be possible success to get them to activate it anyway?
Click to expand...
Click to collapse
Don't worry about what Verizon reps are telling you because most often than not they are following a standard procedure. And they only Input your IMEI into a service like this one:https://www.verizonwireless.com/bring-your-own-device/#checkDevice
As your IMEI is for an AT&T phone, the brand model has an A appended at the end (as in AT&T).
However, you should still investigate this issue and try the steps recommended by the other guys. You will be able to use your phone with a VZV sim without reaching to Verizon
kebas239 said:
Hi,
I was recently gifted an unlocked ATT S8+ (SM-G955U) which I'm trying to activate to my Verizon account. I've read conflicting information about this, and after going to the Verizon store and calling them directly I'm thoroughly confused.
The rep on the phone told me that the phone is "incompatible" with their network based on the IMEI number. From what I gather, the hardware (and model numbers) on all the major carrier's S8+s are the same and simply have different firmware. I've also read that they're interchangeable. Has anyone successfully gotten the ATT S8+ on Verizon? I'm almost feeling like it's something where I would need to jump through more hoops and speak to a manager to get them to do it, but before I did I wanted to get others input. Thanks!
Click to expand...
Click to collapse
I have an AT&T S8 + on Verizon's network, had to unlock the phone, I did flash VZV firmware.
Works for me.
Thanks all for the responses! So it does look like I can do it then, but I just need to get Verizon to activate the new SIM. Think if I could find another phone that's compatible, throw the SIM in, activate, then switch the SIM to the S8+ it would work? (Assuming I've flashed the Verizon firmware on it).
Also, I'm trying to find out how to flash the phone properly. I don't really need root, but I'll take it if its easy. Thinking in my scenario, I'd follow this thread, correct?
https://forum.xda-developers.com/ve...opment/rom-s8-allcarriersrootedstock-t3659232
kebas239 said:
Thanks all for the responses! So it does look like I can do it then, but I just need to get Verizon to activate the new SIM. Think if I could find another phone that's compatible, throw the SIM in, activate, then switch the SIM to the S8+ it would work? (Assuming I've flashed the Verizon firmware on it).
Also, I'm trying to find out how to flash the phone properly. I don't really need root, but I'll take it if its easy. Thinking in my scenario, I'd follow this thread, correct?
https://forum.xda-developers.com/ve...opment/rom-s8-allcarriersrootedstock-t3659232
Click to expand...
Click to collapse
Yes, if you can get VZW to activate a nano SIM then all you have to do is pop it in your S8+, and it will work perfectly.
You don't HAVE to flash the Verizon firmware, but you'll won't be able to use certain features such as VoLTE and WiFi calling with the ATT firmware, so I recommend it. Not a necessity though.
To change carrier firmware, follow this thread:
https://forum.xda-developers.com/galaxy-s8+/how-to/snap-guide-flashing-standard-fw-carrier-t3627255
Can't help you with rooting. Sorry, I stopped rooting my phones long ago.
Mr. Orange 645 said:
Yes, if you can get VZW to activate a nano SIM then all you have to do is pop it in your S8+, and it will work perfectly.
You don't HAVE to flash the Verizon firmware, but you'll won't be able to use certain features such as VoLTE and WiFi calling with the ATT firmware, so I recommend it. Not a necessity though.
To change carrier firmware, follow this thread:
https://forum.xda-developers.com/galaxy-s8+/how-to/snap-guide-flashing-standard-fw-carrier-t3627255
Can't help you with rooting. Sorry, I stopped rooting my phones long ago.
Click to expand...
Click to collapse
This is great information! I'll call back Verizon and knowing all this I have something to back myself up with to at least try to convince them to activate the SIM (if not, I'll find a temporary phone to activate).
Thank you (and everyone else) for all the help!
I was able to get Verizon to activate the SIM and IMEI of the new S8. When I checked my account online to verify, it shows the correct numbers. Unfortunately, the phone is still not able to make calls or connect to the mobile network.
Following this, I rooted and flashed a deodexed stock ROM/firmware that is compatible with all carriers. This made no difference in the issue.
On the status bar, normal reception for my area is shown. There is no data (LTE/3G, etc.) connection, however. In looking at the APN settings, there are multiple Verizon options to choose. "Verizon Internet" (VZWINTERNET) is what is selected. Under the network operators, Automatic is selected. I tried changing it to Manual, but I do not get an option to select Verizon. Only ATT or T-Mobile. Under SIM Card Status, It's says that I'm on an unknown network.
Any ideas on what I could do to diagnose this? Sorry for all the questions, but I want to be able to get this phone to work so bad!
Thanks!
Success! I was about to give up, but decided to try a few more things.
1) To register a new SIM on VZW, it needs to initially go into a VZW based phone to work correctly. Once doing this, I saw some changes:
- I could now see my phone number.
- Verizon was an option under the network operators setting.
This did not solve my problem, however, as I still could not connect to the network. When selecting VZW, the request would fail and say to try again later. So onto the next (and last!) thing I did...
2) Download VZW firmware and flash via ODEN (The Comsey version, but I don't think that matters). I added the BL, AP, CP & CSC (included in the zip file) using the default options. I found this firmware at the below link and grabbed the latest version. The download was very slow for me (I had to run it overnight), but numerous posters stated that they are a reliable source so I took a chance.
https://www.sammobile.com/firmwares/galaxy-s8-plus/SM-G955U1/VZW/download/G955U1UES2AQL1/201500/
I'm just so glad everything is working now. Thank you so much to all who have responded to the thread to guide me in the right direction! Hope this helps someone else who may be having the same trouble.
Does anyone have a definite solution to this problem? I've read many opinions but haven't run across a solution. I have a Samsung unlocked S9+ running official AT&T firmware and userdata but the carrier specific apps and features still don't work. The best infomation I've found is that the IMEI numbers of the unlocked devices are not in AT&T system so the features/apps won't work.
If this is the case, has anyone had any luck getting AT&T to register their IMEI and get the features working?
What worked for me and others (see the at&t fw thread) is to call or chat with AT&T and give them a imei from a carrier branded phone(with your sim in, though this might not be required). Tell them you are trying to get wifi calling to activate and it is failing at the provisioning step and they will input your imei and it will reprovision. Then pull your sim and put it into your s9/+ running at&t fw and it will allow volte, wifi calling and call protect to work (these are the only ones I use).
Good luck
I talked with someone in AT&T technical support and they remoted directly into my phone, reset all app defaults and network settings.. This of course didn't fix anything so they opened a trouble ticket. They told me my IMEI was in their system and was OK. Haven't heard back yet.
why not just flash ATT U firmware?
I'm running AT&T official U firmware G965USQS2ARF4. What just occurred to me was that I didn't do a factory reset before or after applying it via ODIN.
Stuart R said:
I'm running AT&T official U firmware G965USQS2ARF4. What just occurred to me was that I didn't do a factory reset before or after applying it via ODIN.
Click to expand...
Click to collapse
Just did that... Didn't help.
Stuart R said:
Does anyone have a definite solution to this problem? I've read many opinions but haven't run across a solution. I have a Samsung unlocked S9+ running official AT&T firmware and userdata but the carrier specific apps and features still don't work. The best infomation I've found is that the IMEI numbers of the unlocked devices are not in AT&T system so the features/apps won't work.
If this is the case, has anyone had any luck getting AT&T to register their IMEI and get the features working?
Click to expand...
Click to collapse
Stuart R said:
I talked with someone in AT&T technical support and they remoted directly into my phone, reset all app defaults and network settings.. This of course didn't fix anything so they opened a trouble ticket. They told me my IMEI was in their system and was OK. Haven't heard back yet.
Click to expand...
Click to collapse
Yes your IMEI is in their system. But it's not an IMEI from a branded ATT phone. You have to have the IMEI from an ATT phone like others have said, and like i had to do or you will not get the features, no matter what firmware you flash. This has been discussed in many threads. You have to have ATT change your IMEI in their system.
elliwigy said:
why not just flash ATT U firmware?
Click to expand...
Click to collapse
Wont help unless you have a 965U or the IMEI from an ATT phone . ATT Features will not work on 965U1 IMEI. AT&T told me theses features wouldn't work on an unlocked phone and asked if i had the unlocked version. I told them no, it was an ATT phone i bought from Best Buy and it has an ATT logo (not the truth, got it from Samsung) and that i read in the forums that there were some issues with the S9 and that changing the IMEI fixed everyone's problems. I said i had my s8 here that everything works on and she said it's worth a shot to try and she changed mine in their system to the IMEI from my AT&T Branded S8 that i provided them. 965U1 has worked flawless ever since. All features work.
nugzo said:
Yes your IMEI is in their system. But it's not an IMEI from a branded ATT phone. You have to have the IMEI from an ATT phone like others have said, and like i had to do or you will not get the features, no matter what firmware you flash. This has been discussed in many threads. You have to have ATT change your IMEI in their system.
Wont help unless you have a 965U or the IMEI from an ATT phone . ATT Features will not work on 965U1 IMEI. AT&T told me theses features wouldn't work on an unlocked phone and asked if i had the unlocked version. I told them no, it was an ATT phone i bought from Best Buy and it has an ATT logo (not the truth, got it from Samsung) and that i read in the forums that there were some issues with the S9 and that changing the IMEI fixed everyone's problems. I said i had my s8 here that everything works on and she said it's worth a shot to try and she changed mine in their system to the IMEI from my AT&T Branded S8 that i provided them. 965U1 has worked flawless ever since. All features work.
Click to expand...
Click to collapse
sounds about right.. i mean you can switch csc while on U1 depending on the sim card inserted but U1 isnt meznt to have all the carrier crap they need for the special features to work so u get the bare minimum..
while on U firmware, it seems the csc doesnt fully switch like they did on the S8 devices.. i tested this on my sim unlocked vzw s9+ with an att sim and a sprint sim and although data and calls worked,it stsyed on verizon bootani and bloat etc etc no matter what i did.. before on s8 devices after a reset it would have changed the boot ani,bloat and woulda had all the carrier features..
im also surprised they changed your imei lol.. i thought that was illegal lol.. i guess if the carrier does it then its fine haha
nugzo said:
Yes your IMEI is in their system. But it's not an IMEI from a branded ATT phone. You have to have the IMEI from an ATT phone like others have said, and like i had to do or you will not get the features, no matter what firmware you flash. This has been discussed in many threads. You have to have ATT change your IMEI in their system.
Hard to believe that they would just accept another IMEI and register it to your phone. I thought these were all unique numbers that couldn't be used on more than one device. How did that change affect the phone that originally had the branded IMEI?
Click to expand...
Click to collapse
Stuart R said:
nugzo said:
Yes your IMEI is in their system. But it's not an IMEI from a branded ATT phone. You have to have the IMEI from an ATT phone like others have said, and like i had to do or you will not get the features, no matter what firmware you flash. This has been discussed in many threads. You have to have ATT change your IMEI in their system.
Hard to believe that they would just accept another IMEI and register it to your phone. I thought these were all unique numbers that couldn't be used on more than one device. How did that change affect the phone that originally had the branded IMEI?
Click to expand...
Click to collapse
Didnt affect original s8 i used at all. or the s9. I replaced the s8 with the s9 when it came out so i just used the sim out of the s8 when the s9 arrived. s8 is just a spare phone now. I asked the operator if this would disable the other phone that the IMEI came from and she said no. I put sim from s9 in s8 afterwards just to test and it worked fine. They arent changing the IMEI of your actual s9, it still shows your original IMEI in your phone settings. They are just using the IMEI you provided on their end. What is actually going on behind the scenes i dont know. Maybe somebody that works in carrier support or may just have knowledge on how this actually works could chime in. I'm guessing they just use the IMEI to activate the features, since the unlocked one isn't eligible. I saw a better explanation in one of the firmware threads, if i run across it i'll post the link.
Click to expand...
Click to collapse
I will reiterate what is said above and clarify my post. You aren't asking the support team to change your phones imei. I think as stated previously that is a forbidden/illegal maneuver. The support request is to change the imei which is active in the at&t system as only carrier branded phones are able to use certain at&t features.
If you have an old AT&T phone its imei can be used to "trick" at&t into activation/provisioning. Then you can put your sim into a U1 phone using at&t firmware and use carrier specific features.
Hopefully, this is easier to understand and clears up some of the confusion I may have introduced in my original reply.
jay2o01 said:
I will reiterate what is said above and clarify my post. You aren't asking the support team to change your phones imei. I think as stated previously that is a forbidden/illegal maneuver. The support request is to change the imei which is active in the at&t system as only carrier branded phones are able to use certain at&t features.
If you have an old AT&T phone its imei can be used to "trick" at&t into activation/provisioning. Then you can put your sim into a U1 phone using at&t firmware and use carrier specific features.
Hopefully, this is easier to understand and clears up some of the confusion I may have introduced in my original reply.
Click to expand...
Click to collapse
I presume I can use the IMEI from another brand of working AT&T phone such as an iPhone 6S (in this case, my wife's)?
Stuart R said:
I presume I can use the IMEI from another brand of working AT&T phone such as an iPhone 6S (in this case, my wife's)?
Click to expand...
Click to collapse
Another thought... Say I get an old Galaxy S6 which uses the same size Nano SIM as my S9+. I move my S9+ SIM to the S6, update it to the latest AT&T firmware and enable WIFI calling. If I then move my SIM back to my S9+, will the carrier features now work?
Stuart R said:
Another thought... Say I get an old Galaxy S6 which uses the same size Nano SIM as my S9+. I move my S9+ SIM to the S6, update it to the latest AT&T firmware and enable WIFI calling. If I then move my SIM back to my S9+, will the carrier features now work?
Click to expand...
Click to collapse
This is exactly what I'm doing. I use an older LG phone and the sim/IMEI then swap it to my u1 with AT&T fw after the device is provisioned.
jay2o01 said:
This is exactly what I'm doing. I use an older LG phone and the sim/IMEI then swap it to my u1 with AT&T fw after the device is provisioned.
Click to expand...
Click to collapse
Glad to know that works. I can pick up an old AT&T S6 pretty cheaply on ebay. Guess I'll give that a try. Thanks
Download visual voicemail from apk mirrow
jay2o01 said:
This is exactly what I'm doing. I use an older LG phone and the sim/IMEI then swap it to my u1 with AT&T fw after the device is provisioned.
Click to expand...
Click to collapse
I previously had an AT&T branded S8+ with the same SIM that I'm using in the unbranded S9+ but I guess I never provisioned (enabled) WIFI calling. Dunno.
The "trick" of giving them an IMEI from an ATT branded phone doesn't usually work any more, maybe it used to, years ago.
This is why I won't buy OnePlus phones any more. I love their devices, best bang for the buck on the market, but no amount of my fiddling would get ATT to recognize it and provision VoLTE... so no wifi calling, no HD calling... when you make a call, your data drops to 3G, etc...
My Essential, somehow was on their "BYOD" plan and so it would give me VoLTE and HD calling, but no wifi calling. No wifi calling is stupid, because you aren't using their network at that point, so why should they even care?
SquireSCA said:
The "trick" of giving them an IMEI from an ATT branded phone doesn't usually work any more, maybe it used to, years ago.
This is why I won't buy OnePlus phones any more. I love their devices, best bang for the buck on the market, but no amount of my fiddling would get ATT to recognize it and provision VoLTE... so no wifi calling, no HD calling... when you make a call, your data drops to 3G, etc...
My Essential, somehow was on their "BYOD" plan and so it would give me VoLTE and HD calling, but no wifi calling. No wifi calling is stupid, because you aren't using their network at that point, so why should they even care?
Click to expand...
Click to collapse
"maybe it used to, years ago"... That doesn't apply in this context does it as carrier features VOLTE and Wi-Fi calling weren't even in existence years ago. And I'm not sure you have to give them anything. The claim by some is that just provisioning the features with your SIM on a branded device is enough.
Stuart R said:
"maybe it used to, years ago"... That doesn't apply in this context does it as carrier features VOLTE and Wi-Fi calling weren't even in existence years ago. And I'm not sure you have to give them anything. The claim by some is that just provisioning the features with your SIM on a branded device is enough.
Click to expand...
Click to collapse
And as someone who has repeatedly tried it, it doesn't seem to work. You can give them an IMEI from another phone, but it usually doesn't work. Either the IMEI is "on their list", or from a phone that is on the BYOD list, or it isn't. It's not the phone's fault, it is that AT&T is kinda being dicks about this... They want you to buy their phones, because most people sign a contract to get the cheaper price, or use their NEXT financing to spread the costs out. That creates a barrier to exit for most customers and protects AT&T's revenue stream from monthly invoices.
While bringing your own device makes them just as much money from the monthly bill, it doesn't help them "retain customers by locking them into a contract", so they usually don't give you full functionality...
I have had a working SIM from an ATT branded phone that was properly provisioned, popped it into my other device, and VoLTE went away. I would call them up and give them the IMEI from the phone, or one that I know worked, and still no go. The one exception was the Essential, and that was because for whatever reason, Essential went to the effort to get it on their BYOD list.
Trust me, if it was easy, I would be doing it and buying OnePlus phones exclusively every 6 months and that would be the end of it. LOL
I unlocked my note 10+ 5g from t-mobile, but it won't get service with verizon.
When I install a non-tmobile sim, the software does not switch from tmobile for some reason.
Also Sam Mobile only has t-mobile and metro pcs firmware availible for the sm-n976u
Does anyone know if there is a way to get the phone working with verizon? Thanks.
-God Bless
Try clearing Sim card tool kit data.
Network reset.
Clear system cache.
Edit Access point names to correct values.
That's all I got but sure there's more. Never had use more than the above but never changed carriers. Verizon advanced tech support should be able to help... AT&T would.
The Verizon Note 10+ 5G has a different model number. So they probably won't allow the T-Mobile/Metro/AT&T version on their network
iBowToAndroid said:
The Verizon Note 10+ 5G has a different model number. So they probably won't allow the T-Mobile/Metro/AT&T version on their network
Click to expand...
Click to collapse
I think you're correct. AT&T is compatible with Tmobile but not Verizon according to B&H Photo compatibility charts.
So it look like AT&T is in your future. AT&T is easier to deal with anyway. Do not use a corporate store though, use over the phone or online AT&T.
It may be possible to change out the C port PCB for the Verizon variant. Yes that PCB controls internet access. I can't confirm this is the only difference though! That PCB is only $20 and relatively easy to change out.
blackhawk said:
I think you're correct. AT&T is compatible with Tmobile but not Verizon according to B&H Photo compatibility charts.
So it look like AT&T is in your future. AT&T is easier to deal with anyway. Do not use a corporate store though, use over the phone or online AT&T.
It may be possible to change out the C port PCB for the Verizon variant. Yes that PCB controls internet access. I can't confirm this is the only difference though! That PCB is only $20 and relatively easy to change out.
Click to expand...
Click to collapse
It's gets service with att, but it still has the tmobile boot logo. I flashed the att rom, but it didn't help. The carrier is supposed to automatically switch when you insert a different sim card right?
I also tried *#272*imei# but it says "unable to process the request"
CPR.OP546 said:
It's gets service with att, but it still has the tmobile boot logo. I flashed the att rom, but it didn't help. The carrier is supposed to automatically switch when you insert a different sim card right?
I also tried *#272*imei# but it says "unable to process the request"
Click to expand...
Click to collapse
Is it on Verizon or AT&T???
My 60 second attention span is kicking in... now.
As for switching sims I never had to.
The boot logo is the least of worries.
Be glad you didn't brick it.
blackhawk said:
Be glad you didn't brick it.
Click to expand...
Click to collapse
It's actually super difficult to hard brick a Qualcomm device, and even if it is hard bricked and only enters EDL mode, it can be fixed as long as you have the correct files.
There are too many safeguards in place between Qualcomm and Samsung - the average user will always be blocked from doing anything that would brick a device. There's really no danger in flashing firmware whatsoever
blackhawk said:
Is it on Verizon or AT&T???
My 60 second attention span is kicking in... now.
As for switching sims I never had to.
The boot logo is the least of worries.
Be glad you didn't brick it.
Click to expand...
Click to collapse
I'm trying to use it with att because it won't get service with verizon at all.
It's very annoying having the tmobile bloatware. Also it should be compatible with att's 5g, but it only gets lte.
CPR.OP546 said:
I'm trying to use it with att because it won't get service with verizon at all.
It's very annoying having the tmobile bloatware. Also it should be compatible with att's 5g, but it only gets lte.
Click to expand...
Click to collapse
So then I'm assuming that it did not automatically change over to the AT&T splash screen and bloatware when you inserted an AT&T SIM?
iBowToAndroid said:
So then I'm assuming that it did not automatically change over to the AT&T splash screen and bloatware when you inserted an AT&T SIM?
Click to expand...
Click to collapse
Right. It does not have a multi-csc mode for some reason. I thought all samsung phones had that by default.
CPR.OP546 said:
Right. It does not have a multi-csc mode for some reason. I thought all samsung phones had that by default.
Click to expand...
Click to collapse
Not all, no. But all U models should have it.
Have you tried doing a full Odin firmware flash including an AT&T USERDATA file?
iBowToAndroid said:
Not all, no. But all U models should have it.
Have you tried doing a full Odin firmware flash including an AT&T USERDATA file?
Click to expand...
Click to collapse
Yes. That is what I meant by flashing the att rom. It does not seem to make a difference.
CPR.OP546 said:
Yes. That is what I meant by flashing the att rom. It does not seem to make a difference.
Click to expand...
Click to collapse
I may have a way to do it. No guarantees though
iBowToAndroid said:
I may have a way to do it. No guarantees though
Click to expand...
Click to collapse
I'm guessing the only option left is to root the phone, and then start manually removing things.
CPR.OP546 said:
I'm guessing the only option left is to root the phone, and then start manually removing things.
Click to expand...
Click to collapse
My method doesn't involve root, no. You can't root if you've taken an OTA update in March of this year or later
I hope I can be of some help.
I recently ordered a Note 10+ 5G - Locked Verizon from a popular online re-seller. When I turned it on, I was greeted with an AT&T boot logo. I was pretty upset, but I though I'd try to get it up and running on Verizon before spending a couple weeks sending it back and getting a replacement. I tried Verizon's online software and I couldn't get beyond the IMEI change. It kept telling me that the Note's IMEI was what I was already using with my Droid, which was obviously not the case. So, I headed into my local Verizon store.
Nothing they did would get my 4G SIM to work, so they swapped out for a 5G SIM for free, then switched my hardware IMEI numbers and proceeded to have a some difficulty getting on the network. After doing a network reset, it seemingly worked. More on that below. I was getting both data and voice over network. I was able to transfer my setting, apps, etc from my Motorola Droid with Samsung Switch. The phone indicates both 3G and 4G signals as I travel around town. 5G is not available in my immediate area, though it is in some cities I occasionally travel to, but I'm unable to test that just yet. I become aware that there are differences between Verizon's 5G and other networks and it seems the non-Verizon phone I have is probably for the best in terms of compatibility.
Unfortunately, texts frequently take 10-30 seconds to send. Images, gifs and other non-text MMS can take multiple minutes to send and sometimes just fail. Other times the recipient will receive them twice. I feel like this may be due to the poor coverage at my residence. Further testing in areas of good to excellent coverage are necessary. I tried changing the network settings from Settings > Connections > Mobile Networks > Network Mode, but anything other than the default "GLOBAL" would result in a disconnect of data and voice services. The only way to fix it was Settings > General Management > Reset > Reset Network Settings. This would restore the Mode to GLOBAL and bring back data and voice services.
In an effort to remove the AT&T branding, I learned how to trigger a carrier switch, dialed the code and changed it from AT&T to XAA. That got rid of the AT&T boot animation and I was able to remove all but 2 stubborn AT&T apps. I noticed that my android version was 10 and UI was 2.5, so I set out to update.
This is where things got frustrating. Every attempt to update through the settings > software update was met with failure. Try again in 24 hours, it would say. I assumed this was because I was now using a Verizon sim on an AT&T firmware, but I wasn't sure. I thought I might be able to flash to a Verizon firmware, but after several versions and some more research, I learned that going from 976U to 976V was not possible.
So, over the course of several days, I learned a lot. I looked up the firmware releases on AT&T's website for the 976U and saw that they matched the T-Mobile and MetroPCS versions. So, I settled on a T-Mobile version of Android 11 / UI 3.1. It updated without any issues and even remained in XAA mode. No bloatware, no loading images, all settings and apps the same.
So, even though I have an unlocked AT&T Note 10+ 5G 256GB and you have a T-Mobile, the fact that we both have a 976U model, I think there is hope for you to get up and running on Verizon.
Hope this has helped.
I have a TMO S22U and basically I immediately flashed to U1. I'm just curious are there any advantages I'm missing out on being on U1 opposed to T-Mobile U? I know there probably aren't many but I'm just curious.
Some say U1 us better. I'm At&t so probably someone on Tmo will chime in. But for me, U1 offered nothing over U. I mean yes no At&t bloat but I can disable what I don't want on U to get the desired affect.
My biggest thing was the T-Mobile splash screen, it sounds SO DUMB but flashing to U1 made it literally 100% Samsung for me I'm just wondering what could have been lol
The only thing I heard, but I am not certain about is that you lose the TMO visual email capability. Otherwise I have not heard anything else. I am on TMO and I kept mine on U. As butchieboy said, I just disable what I do not want. In all reality, there is not much from TMO that is loaded on the system side. More of the bloat is from Samsung and Google.
Thanks for the speedy replies guys much appreciated
One thing I noticed when I did the same thing, was I could not get 5G Ultra Capacity to work. Not certain I was doing anything wrong, just wouldn't work for me.
I think I read somewhere that you do get it, but there is no icon for it in the U1 image. It will show 4G LTE. Check your download speeds.
dalepl said:
I think I read somewhere that you do get it, but there is no icon for it in the U1 image. It will show 4G LTE. Check your download speeds.
Click to expand...
Click to collapse
I did, 2 days apart in the same spot, the icon showed 5G as did the speed test connection type, but the speeds were much slower than 5G UC, almost 400 Mbps difference. Switched the firmware, back to the insane, almost WiFi type speeds.
Did you check the mobile networks setting to make sure 5G is available and selected?
dalepl said:
Did you check the mobile networks setting to make sure 5G is available and selected?
Click to expand...
Click to collapse
Yes, that was my first thought. It never quite worked the way I should have.
preinstalled crap apps on tmo firmware
The main benefit for me on the unlocked firmware is the built in called id and spam blocking. For att you have to pay extra and tmobile has it on its best plan. But still think it works better than tmobiles implementation. And since i change carriers often i like to always have caller id and spam blocking no matter which one i use.
SomeXGhost said:
My biggest thing was the T-Mobile splash screen, it sounds SO DUMB but flashing to U1 made it literally 100% Samsung for me I'm just wondering what could have been lol
Click to expand...
Click to collapse
Can I ask what specific firmware you used to flash to unlocked?
lmtdshady said:
Can I ask what specific firmware you used to flash to unlocked?
Click to expand...
Click to collapse
I downloaded the S980U1UEU1 firmware which on the latest update ends with AVCK. Used Frija to download it
Carrier firmwares usually get updated a week before the u1 series does.
slime340 said:
One thing I noticed when I did the same thing, was I could not get 5G Ultra Capacity to work. Not certain I was doing anything wrong, just wouldn't work for me.
Click to expand...
Click to collapse
Would've just been a considence. U1 firmware does connect to 5G UC just look at the service menu and it'll confirm if your connected to N41 or not.
But I moved back from u1 to tmv U firmware due to having weird call /sms issues where it would just stop working and only fix was a reboot. Hasn't happened since switching back to U firmware.
Here's an interesting question..
I was on TMO and I bought a S22U from TMO (unlocked it with them afterwards) and of course it was on 5GUC and everything (I used ESIM). I got another sim (Mint Mobile) and when used as primary it would show 5G+
After a while, and just out of spite of the hideous 4G LTE TMO icon I Flashed the U1 firmware.. I'm no longer using TMO as I ported my number to Mint and it has been good.. Would it make sense to return to TMO U firmware or should I stay in U1 as Im no longer using the TMO sim?
joancolmenares said:
Here's an interesting question..
I was on TMO and I bought a S22U from TMO (unlocked it with them afterwards) and of course it was on 5GUC and everything (I used ESIM). I got another sim (Mint Mobile) and when used as primary it would show 5G+
After a while, and just out of spite of the hideous 4G LTE TMO icon I Flashed the U1 firmware.. I'm no longer using TMO as I ported my number to Mint and it has been good.. Would it make sense to return to TMO U firmware or should I stay in U1 as Im no longer using the TMO sim?
Click to expand...
Click to collapse
Probably fine on U1. You're no longer connecting to anything advantageous besides updates being slightly faster with U.
I'm with T-Mobile, but purchased mine directly from Samsung.. I have the S22 Ultra U1. Since my last phone purchased from T-Mobile A52 5G. biggest change, No daily spam calls or text.. What a difference that makes.. With T-Mobile, their so called Spam blocker was notihng more than a spam attractor. Plus no more of the hidious bloat and splash screen..
I have the unlocked and I dirty flash switch between U and U1 depending on which newest ROM is out. There's absolutely no difference save for the annoying TMOB splash screen and that it says UC ... But from my extensive testing the speeds are the same whether it says 5G on the U1 or 5GUC on the U.