Hi all,
I tried to replace my charger port today on my note 10 everything was going great until I put my new replacement port pcb board in then tried to plug it in and test it and it came up with a overheating error please remove charger so I tried to go back to my old one however I did not get this error...
Do you think I got a bad replacement part or do I need to update the board somehow?
Related
Hi guys.
Earlier this morning. My HTC is not charging. I've check the micro-usb port and it appears that there is a problem in the port because there is a brocken pin. I've tried to re-align it and out of luck, the pin broke. I am wondering if it is difficult to replace the micro USB battery port of the HTC sensation. I saw a post on incredible S section and it's easy to replace it as the USB port is just connected on the board via ribbon. Have anyone have encountered the same issue. Worse case scenario is I will need to have the usb port be remove on the phone and replace by a new one, but I am not good on soldering stuff and I might mess the phone big time. I hope someone can reply thanks.
cmangalos said:
Hi guys.
Earlier this morning. My HTC is not charging. I've check the micro-usb port and it appears that there is a problem in the port because there is a brocken pin. I've tried to re-align it and out of luck, the pin broke. I am wondering if it is difficult to replace the micro USB battery port of the HTC sensation. I saw a post on incredible S section and it's easy to replace it as the USB port is just connected on the board via ribbon. Have anyone have encountered the same issue. Worse case scenario is I will need to have the usb port be remove on the phone and replace by a new one, but I am not good on soldering stuff and I might mess the phone big time. I hope someone can reply thanks.
Click to expand...
Click to collapse
At ifixit you can see a picture, that shows, that the port is soldered to the board.
I think it will be hard to solder a new one to it, since the pins are very tiny. Maybe you can find a replacement board on ebay?
My HTC Sensation, has stopped charging altogether. I took it off charging and when i put it on 10 min later, the LED didnt light up, so i got a toothpick and tried cleaning thecharging port just in case something tiny went in and was blocking it to charge, but that didnt work. The phone was working fine until the battery died and i still cant get it to charge. Now im wondering whats broken, to all those repair specialists out there, what could be broken? I can buy a charging port from ebay, but is that it? or could it be anything else.
I was looking to upgrade soon but was waiting for some christmas deals to pop up, but my phone decided to let me down.
Any help appreciated, thanks guys
webstar1 said:
My HTC Sensation, has stopped charging altogether. I took it off charging and when i put it on 10 min later, the LED didnt light up, so i got a toothpick and tried cleaning thecharging port just in case something tiny went in and was blocking it to charge, but that didnt work. The phone was working fine until the battery died and i still cant get it to charge. Now im wondering whats broken, to all those repair specialists out there, what could be broken? I can buy a charging port from ebay, but is that it? or could it be anything else.
I was looking to upgrade soon but was waiting for some christmas deals to pop up, but my phone decided to let me down.
Any help appreciated, thanks guys
Click to expand...
Click to collapse
Did you solved the problem by buying a new phone?, the problem could be the USB connector himself, if you are very handy you can repair it yourself...
anomalic said:
Did you solved the problem by buying a new phone?, the problem could be the USB connector himself, if you are very handy you can repair it yourself...
Click to expand...
Click to collapse
maybe your battery died
I'm assuming you've got it fixed / moved on to a different phone / are using an external charger, but this thread got bumped to the top so I figured I'd chime in.
I had this problem as well. Unfortunately, the usb port is soldered on the board and not a separate unit attached via ribbon cable. The solder joint holding the port on the pcb cracked, resulting in a loose port. Over time, this lead to the pins breaking off the pcb. For a while, I was able to get it to charge by applying pressure to the usb plug. Finally, I took it apart and resoldered it, reinforcing the solder joints for the port itself. It's not too difficult if you use some flux. Just line up the pins and tack the port back on. Then rub flux over the pins and tack them with the soldering iron. No additional solder is needed or recommended-- the pins are in close proximity and it'd be easy to bridge them.
hi guys i have a HTC one x at &t and as usual i connected my phone to the charger and the phone restarted and it didnt charge after wards ! and then i realised that my charger was burnt it also gave a fried smell ! and now my phone wont charge or conect to usb ! i think this is a hardware issue ! do u guys have any ideas to help me ! i would like to know if there are any jumpers or fuses in the charging ways ! please help me with this
and there was no over load current it was normal 220 V AC when i pluged the charger !
im sure about it
:crying::crying:
thank you
I had the same thing happen on my old htc windows phone. That one had a removable battery i could pull out and charge. I'm pretty sure there's a tiny in line fuse on the usb port that has blown. If you're into micro soldering you could try replacing it. Otherwise the only option is pulling it apart and replacing the board with the usb port on it (most likely the motherboard). These tend to cost almost as much as a new phone, so unless you can get a second hand one from someone with a busted screen (or similar) i reckon you're out of luck.
Ps - there's no guarantee that some components on the board aren't damaged beyond the fuse, so motherboard replacement would be the best option.
Sent from my Nexus 7 using Tapatalk
Hey guys,
First of all:
1. I've rooted my phone since the beginning of having my phone.
2. I always pull the cord fairly hard out of my charging port.
So I rooted my mobile to use specific apps. Never have I overclocked my device.
After a bit more than a year my phone stopped seeing my pc when attached. And after a few months my phone completely stopped fast charging
I started by cleaning out my usb port. After that I did a hard reset... still didn't work so I tought it might be my charging port. So I orderd a the part and replaced the port. The part includes a jack, buttons and usb port.
Just replaced it and STILL IT DOESN'T WANT TO QUICKCHARGE OR RECOGNISE MY COMPUTER!!!
Ive tried multiple chargers, cables, computers, hardreset, cleaning and replacing my Galaxy s6 daughter board!!!
What could lead to this problem???? Any help would be much appreciated.
Would you guys have any idea how to flash stock rom on the device without getting it recognized by the computer?
I still have the stock rom on it but I think it is a software issue... :crying:
So before my xz premium completely stopped charging my phone used to randomly stop charging and charged very slow I used quick charge 3.0 and certified usb c cable I had to put the usb type c cable in a certain position to get my phone charging but after a while it completely stopped charging I inspected the port it was fine no bent nor broken cleaned the port but it didn’t charge after sometime I started messing with the phone so I found a way to charge it when I put pressure on the bottom of the phone from front and rear of phone where usb port and flex cable is connected it starts charging but I have to put a lot of pressure to get it to charging I don’t know about hardware so I am here If someone can guide me ty.
Is the charge manager enabled?
In this case the manager try to think at which time you disconneythe the phone from charger and stopped after a while to continue in front of disconnect (or what he think at which time it is)
No the charge manager or (Battery Care) is not enabled but I opened the device myself because I thought it might be a loose connection of charging port's flex cable but it was connected to the motherboard fine but the situation was the same I pressed the flex cable where it connects to the motherboard and the phone started charging I think it's some sort of motherboard problem as it happened with some other xz premium users as well.
P.S:Replacing the charging port didn't fixed the problem.
Hello,
I had a similar problem.
At first it only carried in certain positions or pressing the region where the flat connection. After 1 months it stopped completely.
My problem was in the motherboard charge connector, I needed to buy a new connector to replace with solder. After 30 days, everything continues to function normally.
Wawawagl said:
Hello,
I had a similar problem.
At first it only carried in certain positions or pressing the region where the flat connection. After 1 months it stopped completely.
My problem was in the motherboard charge connector, I needed to buy a new connector to replace with solder. After 30 days, everything continues to function normally.
Click to expand...
Click to collapse
Thank you very much that's the answer I was looking for one more thing can you guide where to buy the connecter for the motherboard and can you tell me how did you manage to replace it.
Update I just got mine fixed the btb connecter for the charging port on the motherboard was loose it needed to be resoldered in case it is more damaged you should get a new btb connecter I'll put the link to buy from link: https://rounded.com/sony-board-connector-btb-socket-2x10pin-1306-0093.html
can u guide me how to do it?
If u know any trusted and skilled repair person just tell him what the problem is and make sure the repair person fix it the right way as described otherwise he might end up damaging ur phone.
alrighty thankss, i'll update soonnn, i already change the port but it still the same
Hello, can you update me on this, i'm facing the same issue. Let me know if this fixed your problem.
yukikunn said:
alrighty thankss, i'll update soonnn, i already change the port but it still the same
Click to expand...
Click to collapse
Changing the port won't fix the issue it can only be resolved if u change the btb connector on the motherboard.
Anyone knowing how to do it?
Hi. Stripped phone down and removed old BtB connector. How do you solder the new part to the motherboard. Is it just the four corners you solder or do all x10 pins on each side need to be soldered?
Can somebody who has changed a BtB put a step by step guide if poss?
yukikunn said:
can u guide me how to do it?
Click to expand...
Click to collapse
ok update i've been trying to repair it/solder it in a couple 3rd repair (because there's no sony xperia service center here in indonesia..) and they say they can't, then i wen't to this repair shop (this one looks not promising) then i got a message after 3 day they say they can't repair it, i was hopeless, i left my phone there.., and after 1 and a half month i think, i finally went to get my phone, and when i arrives to get my phone they charge me 15$, in my head i was thinking "why they charge me? they didn't even fix it"
then the repair man said "we fix it" i was shock they didn't even message me and said it was fixed (they have to) so i pay the 15$ and check the phone its completely normal it's charging the fast charge work, but.. they reinstalled everything (factory reset) kinda strange.. but it's find ok so that's it