Hi guys.
Earlier this morning. My HTC is not charging. I've check the micro-usb port and it appears that there is a problem in the port because there is a brocken pin. I've tried to re-align it and out of luck, the pin broke. I am wondering if it is difficult to replace the micro USB battery port of the HTC sensation. I saw a post on incredible S section and it's easy to replace it as the USB port is just connected on the board via ribbon. Have anyone have encountered the same issue. Worse case scenario is I will need to have the usb port be remove on the phone and replace by a new one, but I am not good on soldering stuff and I might mess the phone big time. I hope someone can reply thanks.
cmangalos said:
Hi guys.
Earlier this morning. My HTC is not charging. I've check the micro-usb port and it appears that there is a problem in the port because there is a brocken pin. I've tried to re-align it and out of luck, the pin broke. I am wondering if it is difficult to replace the micro USB battery port of the HTC sensation. I saw a post on incredible S section and it's easy to replace it as the USB port is just connected on the board via ribbon. Have anyone have encountered the same issue. Worse case scenario is I will need to have the usb port be remove on the phone and replace by a new one, but I am not good on soldering stuff and I might mess the phone big time. I hope someone can reply thanks.
Click to expand...
Click to collapse
At ifixit you can see a picture, that shows, that the port is soldered to the board.
I think it will be hard to solder a new one to it, since the pins are very tiny. Maybe you can find a replacement board on ebay?
My HTC Sensation, has stopped charging altogether. I took it off charging and when i put it on 10 min later, the LED didnt light up, so i got a toothpick and tried cleaning thecharging port just in case something tiny went in and was blocking it to charge, but that didnt work. The phone was working fine until the battery died and i still cant get it to charge. Now im wondering whats broken, to all those repair specialists out there, what could be broken? I can buy a charging port from ebay, but is that it? or could it be anything else.
I was looking to upgrade soon but was waiting for some christmas deals to pop up, but my phone decided to let me down.
Any help appreciated, thanks guys
webstar1 said:
My HTC Sensation, has stopped charging altogether. I took it off charging and when i put it on 10 min later, the LED didnt light up, so i got a toothpick and tried cleaning thecharging port just in case something tiny went in and was blocking it to charge, but that didnt work. The phone was working fine until the battery died and i still cant get it to charge. Now im wondering whats broken, to all those repair specialists out there, what could be broken? I can buy a charging port from ebay, but is that it? or could it be anything else.
I was looking to upgrade soon but was waiting for some christmas deals to pop up, but my phone decided to let me down.
Any help appreciated, thanks guys
Click to expand...
Click to collapse
Did you solved the problem by buying a new phone?, the problem could be the USB connector himself, if you are very handy you can repair it yourself...
anomalic said:
Did you solved the problem by buying a new phone?, the problem could be the USB connector himself, if you are very handy you can repair it yourself...
Click to expand...
Click to collapse
maybe your battery died
I'm assuming you've got it fixed / moved on to a different phone / are using an external charger, but this thread got bumped to the top so I figured I'd chime in.
I had this problem as well. Unfortunately, the usb port is soldered on the board and not a separate unit attached via ribbon cable. The solder joint holding the port on the pcb cracked, resulting in a loose port. Over time, this lead to the pins breaking off the pcb. For a while, I was able to get it to charge by applying pressure to the usb plug. Finally, I took it apart and resoldered it, reinforcing the solder joints for the port itself. It's not too difficult if you use some flux. Just line up the pins and tack the port back on. Then rub flux over the pins and tack them with the soldering iron. No additional solder is needed or recommended-- the pins are in close proximity and it'd be easy to bridge them.
Hi
If anyone know, the emmc pinouts for LG G Flex 2 on the PCB, share pls!
Or anyone, with bad, damaged motherboard, can desolder emmc, and find pinouts with multimeter?
Thanks!
reserved
I write hear because maybe somebody will be need that.
Lats time i get to repair Lg G Flex 2 (H955) it was one time working one time not (singing of deth-no reaction).
By disconnecting of battery pluging the charging cable and making shortage on one pin (round one) neared abowe batery socket with - (the plate securing emmc and other stuffs) the phone become alive (sometimes still didnt give and sign of life or was totaly no detection of the phone by pc).
My Laptop sometimes detect him like normal device sometimes like quallcom 9008 device (the most time quallcom) i was in mining that is software problem (form one side will but someting for me was not right).
Also my motherboard was kind of damage from down side of mainboard are 2 capiticors wicht some kind of chip with 4 legs (i dont know the name of it) but is placen on downstairs from left side (i replaced it with other one). After that phone give more singing of life.
I was looking still (because of strange behaviour of phone and switching off).
I get idea to look for emmc of the phone i clean the black stuff aroud that and i give some flux so i make rehot of that chip in temperature of 320 degrees of C with hot air station.
After that i make the phone in one peace and gess what the phone become alive (no porblems with and the client didnt loos the data from the phone) also was some problems to get the phone alive because of not charged battery (so before that all solution please make sure that your battery is 100% ok beacuse sometimes the battery looks ok and is charging but happen that is still damaged).
Also before please check the usb charging socket (and replace it if its damaged) beacuse also the system of phone also switch off the data ways of the usb because of shortages in socket (when the phone is ok and you make it alive and still usb data connection didnt work with your pc use repair app from the store for your android system version) after that everything must work ok.
So in my situation all the phone is working correctly.
Greetz for all.
Hi All,
I'm hoping someone here can share their opinions.
Recently I've been having charging issues with my XZ Premium. Started a few weeks ago, with the charger plugged in, it would randomly stop and start charging.
Lately it's been getting much worse. I have tried different chargers, cables, adapters etc. The original Sony USB cable plugged into a wall charger, and my laptop. My Dell laptop USB-C (thunderbolt) wall charger, as well as my Dell external battery charger, as well as MicroUSB cables with a USB-C adapter.
Without touching the cables or moving anything, sometimes it'll start or stop charging randomly.
I personally think it's the phone's USB-C connector. I've tried to clean it using a damp wooden toothpick and got some dust out, but it didn't make any difference.
The phone is rooted, and is out of warranty anyways. I also have a lot of security features installed which would make it hard for a tech to troubleshoot (needs passwords etc to be shut down or rebooted) and I store some cryptocurrencies in wallets on my phone.
Is it worth taking it to a tech (I live in Japan, and don't speak much Japanese) or should I be looking at an upgrade? If so, what is the recommended phone from Sony currently? I honestly really like the XZ Premium, so I'm tempted just to buy another one if mine can't be easily fixed.
Thanks!
Bit of an update.
I managed to get my phone to charge using the original Sony USB -> USB-C cable, with an adapter plugged into the thunderbolt port on my laptop. Charging is still incredibly slow though. Also, I noticed when it hit 30% charge, it stopped accepting charge unless the phone is unlocked. If I hit the lock button, the charge light switches off. It switches on again when I unlock it.
*Small edit* It stopped charging again at 31%, despite being unlocked.
Wiggling the cable in the phone socket doesn't seem to effect whether it charges or not, which should rule out the connector in the phone. It has also not registered as a device on my laptop, despite being connected via the USB cable, which would mean it's not specifically a battery issue either, as there's no data connection being made.
So I'm starting to think it's a hardware issue.
I've ordered a new Xperia XZ Premium, because I really do love this phone, and the new XZ2 Premium doesn't seem like much of an upgrade to me apart from the camera, and slightly faster performance. And as much as I'd love to have wireless charging, moving the finger print sensor, and no 3.5mm audio output is a massive dealbreaker for me.
mine died like this, was on charge, started to say charghing/discharghing until he turned off and never came back.. under warranty they changed MoBo/2 stickers/components (??)/ 2 screw and now is back like new
Long term bump.
I bought a new replacement 8142 and have been using that successfully, and I decided to try and fix the charging issues on my old one.
I've just installed a brand new genuine battery, charging port, and power/vol/camera button connections.
The phone booted up fine, but it's STILL not charging at all. Any ideas? Motherboard maybe?
tombow said:
Long term bump.
I bought a new replacement 8142 and have been using that successfully, and I decided to try and fix the charging issues on my old one.
I've just installed a brand new genuine battery, charging port, and power/vol/camera button connections.
The phone booted up fine, but it's STILL not charging at all. Any ideas? Motherboard maybe?
Click to expand...
Click to collapse
Maybe the flex cable isn't working
have only just started having this issue yesterday, have tried different charger and usbc cable combinations, cant even get my pc to recognise it as a plugged in turned off xzp and it wont turn on only show the battery icon with low level indicator in the red.
I have a similar issue.
When I connect my XZP to the pc using a Rampower cable USB-C to USB (sold as 5Gbps and 5V/3A power, thus an USB3.0 with fast charge of 15W) I suffer of the same issue exposed above: randomly the connection get interrupted.
While, charging the phone, yet with the above-mentioned cable and original Sony charger, I get no problem at all!
NB: I have never tried with the original USB cable...
Common fault with the xzp.
The actual connector from the logic board that the usb c module connects to burns out. Require a new logic board or connector to be replaced/soldered on and new usb c module.
kw0n2k said:
Common fault with the xzp.
The actual connector from the logic board that the usb c module connects to burns out. Require a new logic board or connector to be replaced/soldered on and new usb c module.
Click to expand...
Click to collapse
This is good news, because sourcing a mainboard is half the price of the phone, and I've already spent money on a new battery and charging port etc.
My 2nd G8142 phone has just started displaying the same symptoms, and I can't afford a complete replacement.
Can you confirm that this is the part I need? https://www.aliexpress.com/item/4000160901916.html
If so, I'll grab 2, and install into my old phone first to confirm the fix, before then installing one in my newer phone.
tombow said:
This is good news, because sourcing a mainboard is half the price of the phone, and I've already spent money on a new battery and charging port etc.
My 2nd G8142 phone has just started displaying the same symptoms, and I can't afford a complete replacement.
Can you confirm that this is the part I need? https://www.aliexpress.com/item/4000160901916.html
If so, I'll grab 2, and install into my old phone first to confirm the fix, before then installing one in my newer phone.
Click to expand...
Click to collapse
Im onto my second xzp and never had a charging issue
Beetle84 said:
Im onto my second xzp and never had a charging issue
Click to expand...
Click to collapse
Lucky you!
I'm onto my 2nd one, and have had the same charging issues with both.
Both phones have been rooted with a custom ROM, and I use my Dell smart-powerbank to charge them fairly often. So perhaps that is the cause of the early failures on both.
tombow said:
Lucky you!
I'm onto my 2nd one, and have had the same charging issues with both.
Both phones have been rooted with a custom ROM, and I use my Dell smart-powerbank to charge them fairly often. So perhaps that is the cause of the early failures on both.
Click to expand...
Click to collapse
I have unlocked both on day one :laugh:
I have never used a powerbank, could be a factor. Or just bad luck
My first xzp, i cracked the screen trying to replace the screen adhesive, so i bought a rosso red one from ebay.
tombow said:
This is good news, because sourcing a mainboard is half the price of the phone, and I've already spent money on a new battery and charging port etc.
My 2nd G8142 phone has just started displaying the same symptoms, and I can't afford a complete replacement.
Can you confirm that this is the part I need? https://www.aliexpress.com/item/4000160901916.html
If so, I'll grab 2, and install into my old phone first to confirm the fix, before then installing one in my newer phone.
Click to expand...
Click to collapse
Unfortunately I can't confirm if that is the exact part you need as I don't do repairs. All I can confirm is that my repairer has stated that he has seen XZP's with the same recurring issue with the connector burning out.
My guess is, that is the part as he had to micro solder a new connector to the logicboard.
kw0n2k said:
Unfortunately I can't confirm if that is the exact part you need as I don't do repairs. All I can confirm is that my repairer has stated that he has seen XZP's with the same recurring issue with the connector burning out.
My guess is, that is the part as he had to micro solder a new connector to the logicboard.
Click to expand...
Click to collapse
That's good enough for me! I'll grab a couple of them and see if it fixed my older phone first (because I've already tried the battery and the USB-C socket etc) Will update once I've done the repair.
Hope you can fix that problem and share some experience on this issue. Mine has a similar problem. The difference is that it can be charged to 100% but very slow and randomly stop.
sala499 said:
Hope you can fix that problem and share some experience on this issue. Mine has a similar problem. The difference is that it can be charged to 100% but very slow and randomly stop.
Click to expand...
Click to collapse
Yep, that's how my issue started too. It'll progressively get worse.
I've just bought a Google Pixel 3 XL as my 2nd XZP has ceased accepting any charge at all. I'll see if these motherboard sockets fix the issues, then keep one and sell one. Otherwise I'll just sell them both off as parts.
tombow said:
Yep, that's how my issue started too. It'll progressively get worse.
I've just bought a Google Pixel 3 XL as my 2nd XZP has ceased accepting any charge at all. I'll see if these motherboard sockets fix the issues, then keep one and sell one. Otherwise I'll just sell them both off as parts.
Click to expand...
Click to collapse
I talked to some tech on Alibaba (A Chinese shopping website) and they said it can be fixed by replacing that socket. But the replacement requires professional welding equipment and skills. Or the motherboard can be damaged. That's why I am looking for other people's experience before I take step myself. If you succeed, please update this thread. I think there are more people like me who is looking for successful experience from others. Thank you for your sharing.:good:
So before my xz premium completely stopped charging my phone used to randomly stop charging and charged very slow I used quick charge 3.0 and certified usb c cable I had to put the usb type c cable in a certain position to get my phone charging but after a while it completely stopped charging I inspected the port it was fine no bent nor broken cleaned the port but it didn’t charge after sometime I started messing with the phone so I found a way to charge it when I put pressure on the bottom of the phone from front and rear of phone where usb port and flex cable is connected it starts charging but I have to put a lot of pressure to get it to charging I don’t know about hardware so I am here If someone can guide me ty.
Is the charge manager enabled?
In this case the manager try to think at which time you disconneythe the phone from charger and stopped after a while to continue in front of disconnect (or what he think at which time it is)
No the charge manager or (Battery Care) is not enabled but I opened the device myself because I thought it might be a loose connection of charging port's flex cable but it was connected to the motherboard fine but the situation was the same I pressed the flex cable where it connects to the motherboard and the phone started charging I think it's some sort of motherboard problem as it happened with some other xz premium users as well.
P.S:Replacing the charging port didn't fixed the problem.
Hello,
I had a similar problem.
At first it only carried in certain positions or pressing the region where the flat connection. After 1 months it stopped completely.
My problem was in the motherboard charge connector, I needed to buy a new connector to replace with solder. After 30 days, everything continues to function normally.
Wawawagl said:
Hello,
I had a similar problem.
At first it only carried in certain positions or pressing the region where the flat connection. After 1 months it stopped completely.
My problem was in the motherboard charge connector, I needed to buy a new connector to replace with solder. After 30 days, everything continues to function normally.
Click to expand...
Click to collapse
Thank you very much that's the answer I was looking for one more thing can you guide where to buy the connecter for the motherboard and can you tell me how did you manage to replace it.
Update I just got mine fixed the btb connecter for the charging port on the motherboard was loose it needed to be resoldered in case it is more damaged you should get a new btb connecter I'll put the link to buy from link: https://rounded.com/sony-board-connector-btb-socket-2x10pin-1306-0093.html
can u guide me how to do it?
If u know any trusted and skilled repair person just tell him what the problem is and make sure the repair person fix it the right way as described otherwise he might end up damaging ur phone.
alrighty thankss, i'll update soonnn, i already change the port but it still the same
Hello, can you update me on this, i'm facing the same issue. Let me know if this fixed your problem.
yukikunn said:
alrighty thankss, i'll update soonnn, i already change the port but it still the same
Click to expand...
Click to collapse
Changing the port won't fix the issue it can only be resolved if u change the btb connector on the motherboard.
Anyone knowing how to do it?
Hi. Stripped phone down and removed old BtB connector. How do you solder the new part to the motherboard. Is it just the four corners you solder or do all x10 pins on each side need to be soldered?
Can somebody who has changed a BtB put a step by step guide if poss?
yukikunn said:
can u guide me how to do it?
Click to expand...
Click to collapse
ok update i've been trying to repair it/solder it in a couple 3rd repair (because there's no sony xperia service center here in indonesia..) and they say they can't, then i wen't to this repair shop (this one looks not promising) then i got a message after 3 day they say they can't repair it, i was hopeless, i left my phone there.., and after 1 and a half month i think, i finally went to get my phone, and when i arrives to get my phone they charge me 15$, in my head i was thinking "why they charge me? they didn't even fix it"
then the repair man said "we fix it" i was shock they didn't even message me and said it was fixed (they have to) so i pay the 15$ and check the phone its completely normal it's charging the fast charge work, but.. they reinstalled everything (factory reset) kinda strange.. but it's find ok so that's it