I already added 2 fingerprints of the same finger, but very often it takes 2-4 tries until it unlocks.
Anyone else has the problem ? Face unlock works fine but i dont want to use it.
No problem here with 2 fingers.
Yes this sensor is not very precise. I hope it can be fixed.
Only have one fingerprint set and works everytime, even with wet hands
No problems on my side. Far more reliable and also faster than on my old Mi A2 lite.
Mine also works very good, I have 2 fingers from the right hand and one from the left and it unlocks in less than one second without failing.
have goodix i think works perfeclty fine
Best sensor I've had in terms of reliability. It's worked 100% of the times for me. Two fingers.
Works fine for me, but it's not that fast.
Super fast and 100% precise in my case
Fast as precise for thumb, less precision for forefinger
Related
Hi, I have just bought my new S7 and setup my fingerprint on it.
I didn't have fingerprint on my old phone so I can't compare it but I find it really inaccurate..
It gives me alot of wrongs if I am not landing my finger perfectly centered and sometimes even when it is, its still wrong..
I have tried to reassign fingerprints which does improve it for that couple of minutes but later on when I grab my phone and try to unlock it I get so many wrongs..
Is it just me? or any one else find it frustrating?
Any tips to improve it?
Thanks.
Mine never has issues, if your hands are clean and not prone to being sweaty then I would exchange it.
mcjordan92 said:
Hi, I have just bought my new S7 and setup my fingerprint on it.
I didn't have fingerprint on my old phone so I can't compare it but I find it really inaccurate..
It gives me alot of wrongs if I am not landing my finger perfectly centered and sometimes even when it is, its still wrong..
I have tried to reassign fingerprints which does improve it for that couple of minutes but later on when I grab my phone and try to unlock it I get so many wrongs..
Is it just me? or any one else find it frustrating?
Any tips to improve it?
Thanks.
Click to expand...
Click to collapse
Unlike naturally how we expect it to work or how the other sensors like iPhone's, Nexus 6p's etc. works, with Galaxy S7 you should be careful when registering the fingerprint because of the relatively small surface area of the sensor. To make it clear, you can cover almost the whole finger print (considering the relatively large rounded shape of the sensor) in various other devices. While in the case of S7 you should only register the fingerprint in the way your finger will naturally positioned when unlocking. In my case considering the thumb, only an edge of the thumb will only get in contact with the sensor not the the center part or the other areas of the print. So just register the print in the way you normally hold and unlock the phone not keeping in a flat area and registering. If this works there is nothing wrong with the sensor. Otherwise you gonna need to replace the unit.
PS: Correct me if I'm wrong @cadcamaro ;-P
try registering same finger 2 or 3 times, this helps a lot increasing the accuracy of the scanner.
tip and sides of the finger is very important when registering
Sent from my SM-G935F using Tapatalk
Sheryl John said:
Unlike naturally how we expect it to work or how the other sensors like iPhone's, Nexus 6p's etc. works, with Galaxy S7 you should be careful when registering the fingerprint because of the relatively small surface area of the sensor. To make it clear, you can cover almost the whole finger print (considering the relatively large rounded shape of the sensor) in various other devices. While in the case of S7 you should only register the fingerprint in the way your finger will naturally positioned when unlocking. In my case considering the thumb, only an edge of the thumb will only get in contact with the sensor not the the center part or the other areas of the print. So just register the print in the way you normally hold and unlock the phone not keeping in a flat area and registering. If this works there is nothing wrong with the sensor. Otherwise you gonna need to replace the unit.
PS: Correct me if I'm wrong @cadcamaro ;-P
Click to expand...
Click to collapse
I personally set up my thumb when my phone is in my hand already, I also make sure that I move my thumb around and read as much of it as possible.
Thanks for all of your tips!!
I don't think my sensor is defected, it works after all..
I'll try the trick for registering only the tip of the thumb which indeed is what usually presses the button.. in fact I did register that part but not only that..
And about the register more than one time the same finger, does this thing actually recommended?
I mean its kinda ruin the machine learning of that thing.. it gets 2 different fingers that looks alike isn't it?
For me, using the thumb only works if I use/register the center of the thumb. The tip never works, but I can live with that. Center always works
works perfectly for me. in comparison to my S6's finger print sensor, this one is 10x better - faster to recognize and unlock and much more accurate.
Hi
I’ve had my vivo nex s for over 2 weeks and found the onscreen fingerprint unreliable. At times it works perfectly and then at times very fustrating it doesn’t work at all.
I’ve noticed when it’s warm or I’m outside, not sure why.
I’ve reset my fingerprints added couple of times for the same finger but that doesn’t help. I’ve noticed when phone is heated it’s less reliable and doesn’t work at times.
Not sure if it’s faulty or that’s the experience of most out there
Please share your experience and do you think I’ve got faulty set.
Absolutely no problems with the fingerprintscanner.
I've double registered my fingers and it's working perfectly.
Sometimes it takes 1 second but in 99% its working nearly Instant.
Perfect!!! And with a screen protectors or tempered glass? Co.okie4u you have a private message!!!
I also have my moments with the fingerprint scanner. The elite X3 scanner was more a hit than a miss compared to this phone. I will say the it has improved with the 16.5 update but it needs more work. It's as if the registered fingerprint file gets lost.
riz157 said:
Hi
I’ve had my vivo nex s for over 2 weeks and found the onscreen fingerprint unreliable. At times it works perfectly and then at times very fustrating it doesn’t work at all.
I’ve noticed when it’s warm or I’m outside, not sure why.
I’ve reset my fingerprints added couple of times for the same finger but that doesn’t help. I’ve noticed when phone is heated it’s less reliable and doesn’t work at times.
Not sure if it’s faulty or that’s the experience of most out there
Please share your experience and do you think I’ve got faulty set.
Click to expand...
Click to collapse
I'm having the exact same problem. Very Frustrating!
Sent from my vivo NEX S using Tapatalk
Co.okie4u said:
Absolutely no problems with the fingerprintscanner.
I've double registered my fingers and it's working perfectly.
Sometimes it takes 1 second but in 99% its working nearly Instant.
Click to expand...
Click to collapse
Yes, double registering your fingers does the trick. Works flawlessly over here.
How you double register your fingers? Each finger for twice saving? Thanks
I have registered my thumb 3 times and im around 75% when i hit the fingerprint reader.
My main problem asides from the 75% is that its a very small spot on the screen and that i often dont touch it 100%. That, combined with the 75% reliability, means im lucky if im at 50%
As i said absolutely no problem with the fp scanner.
Even when only my half thumb lays on the spot. I think it's a registration problem. ¯\_(ツ)_/¯
May be but you have registered 5 fingers? In each save one finger? Or 1 finger for 2 saves
Please Co.okie4 you have an unread private message since 2 days from me, can you read it? Thanks
Co.okie4u said:
As i said absolutely no problem with the fp scanner.
Even when only my half thumb lays on the spot. I think it's a registration problem. ¯\_(ツ)_/¯
Click to expand...
Click to collapse
GBOX said:
How you double register your fingers? Each finger for twice saving? Thanks
Click to expand...
Click to collapse
I have the same finger registered three times. How I managed to do that is place the finger not on the entire scanner but place the finger on part of the scanner to where you can still see the scanner light. Also use the edges of your finger on partial scanner. I kept trying and it worked. My misses are now less. This shouldn't be the solution as it should just work, but that's one way to get around the problem.
No problem for me.
The only issue is its a little slow when compared to generic finger print, but the awe u get by people around is totally worth than extra second.
Just be aware that you have to follow the instructions as stated on the screen. Use the pressure you would use as usual and when you are registering the edges of your finger grab your phone as you would in real life and with the same pressure as you would use.
I found that if you do this too lightly or too hard you will not recreate it in daily life and hence the failure.
Also register the edge side of the finger that you would touch the screen with, not the entire edge left and right
I can't for the life of me get my phone to unlock with my fingerprint. Is there a way to adjust the screen sensitivity or something?
I have to smash my finger against the screen to get it to work. I never get it on my first try. Some days I feel like it never works and I have to reconfigure all of my fingerprints. Maybe my expectations were too high for this fingerprint sensor.
Sounds like a possible hardware problem with the sensor...I say this because I have two 7 Pro's in the house and neither one of them has any problems at all with the sensor running 10.0.02. YMMV
I think the performance improved a little for me when I took the factory screen protector off.
Register your finger for a second time, just keep trying, it will work eventually
I'm trying to find out if my device is faulty as the finger print sensor is extremely inconsistent.
Previously capacitive finger print sensors I've used have pretty much been flawless unless your finger was dirty or wet, but I'm getting far too many failures to unlock the Fold2. I'm either greeted with "No match", "Cover the entire sensor" or "Wipe the finger print sensor" messages. It's very temperamental - I can click the button to turn the screen and keep my finger in place and it will give me "No match", if I slightly raise my finger off the button and rest it back on the sensor with my finger in place it will unlock....
I have registered this finger (index on right hand) 4 times in the settings. I can test my fingers in the biometrics section of the app and it seems to register a print every time so it looks like it's an issue with how the sensor works when actually unlocking the phone.
Works fine here, but disabled it. The placement is ridiculous!
/CK
Same thing for me, works fine in apps and elsewhere but unlocking the screen is as frustrating as hell..... had the same issue with the S10e but hoped they had improved things. On research (since the S10e) I believe this only affects certain types of people like me with certain types of skin/fingerprint characteristics. Rear fingerprint scanners are no issue for me at all, it's just side mount !!
It took some getting used to but I like it now. I do wish they where up higher.
I noticed that the way I hold the phone and the placement of the sensor had me using the side of my index and thumb rather than the center of either. I put both in again while being careful to use the side rather center of my finger and it works fine now. Another thing that's a little of a push is that you can set it to always hot which helps. The push part comes in because you can trigger it enough while simply holding the phone that you'll max your attempts accidentally and have to put in your password.
Works fine for me, but as others say, the placement is awful. Holding the closed phone in your hand the way you normally would and you touch the sensor causing the 5 attempted unlocks to kick in so I often end up needing to use pattern unlock.
Works much faster than the Z Flip. But the placement is terrible.
Sent from my SM-F916U1 using Tapatalk
..
I am not sure they could have placed it anywhere else.
An in-screen one on the front wouldn't be helpful when you are using the inner screen, and one on the back would be very awkward with the phone open, especially as the inner screen is probably used equally in both portrait and landscape. Certainly wouldn't expect one on the inner screen anyway, the technology is not up to that yet.
But compared to my Note 20 Ultra, the fingerprint reader on the Fold 2 is far more reliable and quicker in my experience.
As someone else said here, the trick is to register your thumb predominantly and scan the edges of your thumb. Note how you hold your phone and use the sensor naturally and use that part of your thumb or finger when registering your prints. And register more than one set using the same finger or thumb.
..
Flawless for me
It's a million times better than the S20 series!
Much better than the Flip.
Sent from my SM-F916U1 using Tapatalk
Works perfectly for me. Better than my Note 10+ did. I like a physical button much better than in-screen. That being said, my N20U fingerprint scanner also works better than the N10+. I have small hands so that might also help. I don't think the placement would be that good for my Husband's large hands though...
Works fine for me!
its fine for me. i had to set it for a few fingers though based on the diff ways of holding it
OG Fold user here and it's absolutely awful and inconsistent for me. Easily the worst scanner I've ever used in a phone.
My problem is locating it on the side of the phone if there was some sort of indentation or something to better locate it, I think it would work better.
I find it pretty reliable to the point that I can unlock it without trying based on how I reach for my phone in my pocket. I also find it mostly well-placed when holding it with the main screen open and using it for apps or to unlock the phone.
Hi,
I'm coming from Note9. Fingerprint scanner was on the back. It also had iris scanner.
So dry or wet finger, day or night - I was able to unlock my Note9 from the first try with 100% probability.
Can't say about S2 Ultra.
Faceunlock - works only in ideal conditions (face in front of the camera, well lit etc.).
Fingerprint - most of the time I unlock it from 1-3 tries. And yes.. I rescanned my fingers many times. Same result.
What is your experience?
Coming from a Note 10+ the fingerprint reader works great; it is much more responsive than the Note 10+. I don't use face unlock (I haven't used it since the Galaxy Nexus), so I can't talk to that. I'm not comfortable using face unlock. It is still less secure than fingerprint or a PIN. I don't care what Apple or Samsung says.
I did like the iris scanner on my Note 8. Though, I am not sure how secure it was.
I have no issues with fingerprint....works mostly first time....sometimes when finger is wet I need a 2nd try....Face unlock works okay most of the time....lighting conditions do play a roll....especially bad if the room is dark and a light shine from behind....overall much better then my previous samsung phones
termdj said:
overall much better then my previous samsung phones
Click to expand...
Click to collapse
Good for you. What previous Samsung phone did you have?
It's really worse than Note9. But Note9 had different tech (iris scanner and not ordinary front facing camera, hardware finger print scanner and not under the screen scanner).
I had the s5,s6+,s9,s10 and s21 ultra...on my previous phones I made sure to scan one finger into multiple fingers, so it had 5 copies of my finger... that helped mostly with it reading my finger print the first time.. saw a video on it on YouTube. With the s22 ultra I only have one fingerprint registered and works great...i did make sure i scan it from all angles and sides... also video on YouTube...
Faceunlock much worth than OnePlus.
termdj said:
I had the s5,s6+,s9,s10 and s21 ultra...on my previous phones I made sure to scan one finger into multiple fingers, so it had 5 copies of my finger... that helped mostly with it reading my finger print the first time.. saw a video on it on YouTube. With the s22 ultra I only have one fingerprint registered and works great...i did make sure i scan it from all angles and sides... also video on YouTube...
Click to expand...
Click to collapse
S22 Ultra lets scan only 4 fingers. So 2 times right and left thumb.
I suggest doing 1 finger on all 4...it worked for me on the previous phones
I used both thumbs for setting up one fingerprint. Did this for all four fingerprint options, so each process has both thumbs registered and it went on for four times. Did this fun and not necessarily to make sure to recognise better.
Both thumbs work as intended. Doesn't work when wet or with pruney fingers.
I don't use face recognition because of no security and "ideal condition" requirement. It's neither IRIS scanning nor super secure face id.
bat0nas said:
Hi,
I'm coming from Note9. Fingerprint scanner was on the back. It also had iris scanner.
So dry or wet finger, day or night - I was able to unlock my Note9 from the first try with 100% probability.
Can't say about S2 Ultra.
Faceunlock - works only in ideal conditions (face in front of the camera, well lit etc.).
Fingerprint - most of the time I unlock it from 1-3 tries. And yes.. I rescanned my fingers many times. Same result.
What is your experience?
Click to expand...
Click to collapse
S22u fingerprints recognized 80% of the time. I have set up one thumb and one index finger. I wish the fingerprint reader was on the power button like the z Fold 3 which worked about 98% of the time.
I do not use face unlock.
The FPR for me works about 99% of the time. If a finger was wet that's typically the only time it doesn't work. I use face unlock secondary. Also works great.
I came from a pixel 6 pro, where the FPR was total garbage. It's nice having a phone you can actually unlock with a fingerprint lol.
gettinwicked said:
The FPR for me works about 99% of the time. If a finger was wet that's typically the only time it doesn't work. I use face unlock secondary. Also works great.
I came from a pixel 6 pro, where the FPR was total garbage. It's nice having a phone you can actually unlock with a fingerprint lol.
Click to expand...
Click to collapse
Wow, 99% success with FPR - that seems a little high. Try turning off face unlock and see what percent success you get with just FPR. Not sure if it goes immediately to face unlock on the 1st failed attempt with the FPR. If it does, face unlock is very fast and may be masking the failed FPR attempts.
Rubby1025 said:
Wow, 99% success with FPR - that seems a little high. Try turning off face unlock and see what percent success you get with just FPR. Not sure if it goes immediately to face unlock on the 1st failed attempt with the FPR. If it does, face unlock is very fast and may be masking the failed FPR attempts.
Click to expand...
Click to collapse
I'm getting about 99% with the fingerprint reader and I am not using face recognition.
At least 90%-95% success rate with FPR.
I'm not using face unlock
Virgo_Guy said:
I used both thumbs for setting up one fingerprint. Did this for all four fingerprint options, so each process has both thumbs registered and it went on for four times. Did this fun and not necessarily to make sure to recognise better.
Both thumbs work as intended. Doesn't work when wet or with pruney fingers.
I don't use face recognition because of no security and "ideal condition" requirement. It's neither IRIS scanning nor super secure face id.
Click to expand...
Click to collapse
I did both thumbs and both forefingers using one fingerprint entry. I saw it on youtube and couldn't believe it. I'm not talking about adding one fingerprint completely and then hitting add. Example, start with your thumb and just register part of it, then use a forefinger, another thumb, another forefinger, keep alternating until it hits 100%. Works perfectly.
bat0nas said:
Fingerprint - most of the time I unlock it from 1-3 tries.
Click to expand...
Click to collapse
Same experience. Works very fast but probability of unlock is 90% or so. And this is supposedly a good result for the scanner which is behind the screen. My previous phone was OnePlus 3T with a fingerprint scanner inside a button - unlock speed was the same (instant) but unlock probability was something like 99.99%. This is called progress...
I use both thumbs for unlocking which works around 90% of the time.
With face unlocking I have normal and alternative appearance set so this typically works before I can even use my fingerprints.
Inconsistent at best. Still better than the fingerprint on my Pixel 6 Pro. But face recognition belongs to the iPhone.
bat0nas said:
Hi,
I'm coming from Note9. Fingerprint scanner was on the back. It also had iris scanner.
So dry or wet finger, day or night - I was able to unlock my Note9 from the first try with 100% probability.
Can't say about S2 Ultra.
Faceunlock - works only in ideal conditions (face in front of the camera, well lit etc.).
Fingerprint - most of the time I unlock it from 1-3 tries. And yes.. I rescanned my fingers many times. Same result.
What is your experience?
Click to expand...
Click to collapse
I have a new S22 and my experience is so frustrating. I am coming back to samsung after few generations from huawei (mate 20 pro and P30 Pro). What I can't digest is the fingerprint and face id works so flawlessly on the Huawei which is relatively newcomer than Samsung and they have done it so perfectly. (on Mate 20 Pro it used 3D scan and on P30 Pro 2D scan). Samsung with all its generations with the many decades of experience still struggles.
Fingerprint is too slow and sometimes after a few tries. Face ID takes a while to open the screen. And what more - when i enable fingerprint - for some reason the face ID just becomes lazy, I don't see it even attempting to detect the face (from the rim light effect on front camera). It looks as though the fingerprint has superceded the face id. I am getting more and more frustrated by this. I did try scanning both fingerprint and face id several times. But no luck. I even suspected probably there is a way to prioritize the usage of biometrics and looked for it but there is none.
In contrast on my Huawei - it just takes fraction of a second to unlock as though it is not scanning the id (both face and fingerprint) but actually it does the job so quickly. What is happening here - is this how samsung had been all these years? I can't believe if they say they've improved from previous generations. Why is the face id so slow and most times (well lit environment as well - the face id is not at work at all (no rim light around front camera, as though the id is not at work)
Is this the same experience others have and is normal for Samsung? Do you all think it is a one off case and a reset might fix it?
I find it almost as smooth as IPhone 13. Both fingerprint and face recognition work well together, probably @ 98% unlock efficiency. with official samsung screen protector