I've been putting this off for a long time(like 6 months), but here's the series of mistakes I made: I first started the update to magisk and didn't uninstall it. I then accidentally let my phone die, wherein the restart tried to update magisk. Then, instead of just applying a fresh install while in a soft brick/boot loop, I decided I would try switching partitions. Now my Z4 is stuck in a bootloop where the screen only lights up very briefly, perhaps half a second to a quarter of a second, before going black and then lighting up again. I can't get into the bootloader, and I have to have the battery unplugged now for the usb to provide power to the phone.
Am I boned here, or is there some way I can still recover this thing? Thanks in advance for any help that can be given.
Grave Jester said:
I've been putting this off for a long time(like 6 months), but here's the series of mistakes I made: I first started the update to magisk and didn't uninstall it. I then accidentally let my phone die, wherein the restart tried to update magisk. Then, instead of just applying a fresh install while in a soft brick/boot loop, I decided I would try switching partitions. Now my Z4 is stuck in a bootloop where the screen only lights up very briefly, perhaps half a second to a quarter of a second, before going black and then lighting up again. I can't get into the bootloader, and I have to have the battery unplugged now for the usb to provide power to the phone.
Am I boned here, or is there some way I can still recover this thing? Thanks in advance for any help that can be given.
Click to expand...
Click to collapse
Try connecting to a pc, then hold volume down and power buttons.
Sent from my Moto E (4) using Tapatalk
sd_shadow said:
Try connecting to a pc, then hold volume down and power buttons.
Sent from my Moto E (4) using Tapatalk
Click to expand...
Click to collapse
I've tried that, the screen just stays black.
Grave Jester said:
I've tried that, the screen just stays black.
Click to expand...
Click to collapse
You'll need to use Blankflash.
That whole boot partition A/B is deceptive. Switching to B, puts you in 9008 mode.
Its a pain to recover from this, but with patience you'll accomplish it.
Follow the instruction here, although it's for G7, the process is the same. But you'll need your proper firmware once you get to the BL.
https://forum.xda-developers.com/g7-plus/how-to/hard-brick-moto-g7-plus-downgrade-t3958608
Alternatively: There's a tool called "QDL".
I've not used it, but perhaps it's the clue you need.
Related
Hey all
Before anyone mentions that i should be searching around more, i would like to say that i've been on multiple threads and they all state the same thing (use NVflash to flash CWM and then boot into CWM but the solution did not work for me past flashing CWM and then trying to access recovery after) and i wasn't able to find one that had a similar problem as mine.
I have CWM flashed through NVflash and was running CM7.1 RC1. I took a screenshot with the 'shootme' app and proceeded to look at the gallery to make sure it came out okay. The gallery crashed and i was sent to the home screen. I swiped to a different homescreen when my phone froze halfway through the transition to the next screen. No combination of buttons/long presses were able to get me out of it so i went ahead and did a battery pull. So my dilemma is that now i'm stuck at the LG boot logo with no blue status bar under it. It freezes there and will not do anything every time i boot up. volume down+power does not give me access to recovery nor does any other button combo get me past the LG boot logo.
Are there any other methods i might be able to use like ADB or what not to get myself out of this situation? or at least into recovery? Any comments or suggestions would be greatly appreciated as i've been searching for hours with little help and my eyes are starting to get strained.
hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
If so.. do the nvflash again? Edit: Not sure if I would do this without getting further guidance tho..
schmit said:
hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
Click to expand...
Click to collapse
This. I remember when I boot looped my phone I had the problem of letting go of the volume key too early, you need to hold down volume and power from a totally powered off phone until recovery actually starts and you see the green "android" logo of CWM.
Try re-flashing CWM, NVFlash CAN fail. There is literally nothing you can do within the OS that will prevent recovery from working. Either you did something wrong somewhere along the recovery process or you discovered an entirely new problem with the phone. I'm going to hazard a guess and say it's the former.
Thanks for the response guys. I wish that it was the case of not holding the buttons long enough. I have tried numerous times with the buttons held down for a long period of time. I even held the combo down for almost 5 minutes a few times.
Every time i try to boot up, it won't go past the LG boot screen so i would pull the battery out and go through flashing CWM through NVflash again. I'm sure I'm not missing anything because everything goes through and gets sent to the phone successfully.
I did happen to run into a thread that was closely similar to mine but his method was to just keep reflashing CWM and the stock recovery back and forth every time it failed until it turned on. I might have to try that if i cannot figure out this problem out soon. Not being able to use this phone is killing me! heh.
I just joined your club. Wow this sucks.
So apparently this is a whole new problem that's been found? Every other help thread seems to point to using NVflash or remaking the partitions due to a bad flash using an O2x based file instead of G2x.
But none of those solutions come close to doing anything. There has been some people with the same problem as me but aren't proactive at all enough to get someone's attention, so i'm guessing this problem is getting pushed to the side with people just going about getting their phones replaces/buying new ones.
I did happen to run into a thread on paulobrien/modaco's forum that had people using NVflash to get out of any sticky situation like this. It just reverts everything back to the stock factory settings but with root. We cannot use this though because he hasn't built it to be compatible with our LGP999's because everything was built for their UK LGP990's. Maybe that's a start to getting this solution fixed?
I hate to say this, bit you might have to call t mobile and get a replacement. Flash back to stock recovery and they won't know you messed with anything.
Sent from my Nexus 5g using XDA Ultimate App
Don't send back....you'll get same defacement a battery pull go into nvflah and go back stock then flash nv flash fix pArtitions
As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.
Jduhb said:
As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.
Click to expand...
Click to collapse
Did you ever find a solution to this issue? Because my phone is doing this...
I attempted to restore my phone back to the wrong backup that was from a galaxy sII (2.3.4 i think); needless to say, the restore failed. I then restarted my phone from CWM and it gets stuck at LG screen.
I have tried to NVflash back to stock; nothing. same thing reflashing back to CWM.
ideas?
have you tried this link out yet?
http://forum.xda-developers.com/showthread.php?t=1180331
same problem..... anybody find something to fix this yet?
From what I heard is that you need to remove the battery, then boot into recovery or something.
Sent from my G2X
Use smartflash for the p990 but only use the p999 ap.bin file which will put the rom and kernel back to stock p999.
Rom for recovery always fixes any soft brick back to stock 2.3.3 OTA. It's saved my phone multiple times from stuck on S/W screen to being stuck on lg logo or even the dreaded can't mount sdcard-cache errors in cwm.
Sent from my LG-P999 using xda premium
I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229
jcbofkc said:
I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229
Click to expand...
Click to collapse
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!
sabotage99 said:
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!
Click to expand...
Click to collapse
Glad for you that it worked.
Kwes1020 pointed me in the right direction last week. Be sure to give a thanks to ILUHA_89 who came up with the fix.
Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.
d12unk13astard said:
Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.
Click to expand...
Click to collapse
It's really not that big a deal. I was brand new to android once and asked all sorts of things.
I, like you, happen to read everything I can get my hands on. Some struggle going through all the info. I was here the day the forum opened, so I kind of remember where everything is.
Some are lazy and others just have no idea what the heck is going on and are intimidated by certain processes. I would rather help someone instead of listening to them ***** about their broken phone.
Hey guys, I recently found my tf300t tucked away somewhere. Haven't used it for absolute months! And I remembered why, I kept having problems with CM somehow(I believe the last update was somewhere in June-July of 2013), so this time after charging it and wanting to do it all again, I figured I'd get it updated. Seeing as it's been nearly a year and so much crap has changed, I figured something was going to go wrong. Before I even DID ANYTHING, I told the tablet to reboot into recovery mode, and boom that's where I'm stuck. The Tablet rebooted and now only shows the Asus boot screen... Nothing else! Vol down+pwr didn't work, nothing. And If I hold the power button it shuts off but then turns right back on 1-2 seconds later. I'm not sure what this is, a soft brick? a Brick? just an error? Can anybody please help? I know this is probably the wrong section, but I'm just frustrated.
Thank you to anybody who can help in any shape or form.
PS: no bashing is needed, my tables already bashing my head for me.
Amirocassar said:
Hey guys, I recently found my tf300t tucked away somewhere. Haven't used it for absolute months! And I remembered why, I kept having problems with CM somehow(I believe the last update was somewhere in June-July of 2013), so this time after charging it and wanting to do it all again, I figured I'd get it updated. Seeing as it's been nearly a year and so much crap has changed, I figured something was going to go wrong. Before I even DID ANYTHING, I told the tablet to reboot into recovery mode, and boom that's where I'm stuck. The Tablet rebooted and now only shows the Asus boot screen... Nothing else! Vol down+pwr didn't work, nothing. And If I hold the power button it shuts off but then turns right back on 1-2 seconds later. I'm not sure what this is, a soft brick? a Brick? just an error? Can anybody please help? I know this is probably the wrong section, but I'm just frustrated.
Thank you to anybody who can help in any shape or form.
PS: no bashing is needed, my tables already bashing my head for me.
Click to expand...
Click to collapse
Does it respond to being plugged into a computer? Try pressing the reset button and then doing the vol down to get into fastboot.
cmendonc2 said:
Does it respond to being plugged into a computer? Try pressing the reset button and then doing the vol down to get into fastboot.
Click to expand...
Click to collapse
Nope, but I am running W8 and I read that W8 kinda sucks for this sort of thing. Like you need W7 or XP? Correct me if im wrong. Any other ideas? . I didn't do anything! Just told it to reboot into recovery, and now I'm stuck there. I held pwr+volume down and it still keeps stuck, and if I try to power it off then it just turns on again a few seconds later.
Amirocassar said:
Nope, but I am running W8 and I read that W8 kinda sucks for this sort of thing. Like you need W7 or XP? Correct me if im wrong. Any other ideas? . I didn't do anything! Just told it to reboot into recovery, and now I'm stuck there. I held pwr+volume down and it still keeps stuck, and if I try to power it off then it just turns on again a few seconds later.
Click to expand...
Click to collapse
I have the same issue more or less...
Mine will not go into fastboot
kingrat said:
I have the same issue more or less...
Mine will not go into fastboot
Click to expand...
Click to collapse
I also have this issue
??
So none of you can get to fastboot or recovery, but you do all get the stuck at Asus logo?? All your bootloaders are unlocked?? All of you got to this spot, the same way by not using the tablet for long periods of time???? What bootloader are you on?? What version of CM are you running??? What is the OS of your PC, If its not the top 3 please be specific......Are you using a stock asus data cable??
Sounds similar
From what your posts say, it sounds like something i came across. I struggled for hours trying to figure out this dilemma, but if you're in the same situation i was in then as long as you're in that screen even after trying to hold the power and -vol let it sit there, plug in and make sure you have all your files associated with fastboot platform installed and try pushing the new TWRP ( http://www.androidfilehost.com/?fid=23329332407569892 ) to your tablet, for some reason after a certain update after 4.1 i believe? CWM stopped working for me, so try pushing the new TWRP from that link there and possibly you should be able to gain control of your tablet again and start installing the new packets for CM 11. I found this to be very helpful http://forum.xda-developers.com/showthread.php?t=2570965 and thanks to "cmendonc2", 6 post down, he really cleared things up with his simple links. Hope you're in the same boat as i was. Good luck
hi there,
I'm running CM11 nightly late feb. For no apparent reason my phone went into a boot loop this morning (n.b. I didn't flash a new rom or installed a new app). Now it constantly reboots (literally) and doesn't get further than the CM11 boot video or google logo.
If I press volume down and power, it will head into bootloader - but - I can't navigate beyond 'shut down' or 'restart bootloader'. It doesn't execute two consecutive volume up or down commands. In other words, it's impossible to get into recovery mode. Also, because my phone doesn't boot further than the video or logo, I can't make a fastboot or adb connection via my laptop.
Does anybody know how I can fix this issue? I'm clearly running out of luck. Many thx in advance!
reflash recovery?
Try to boot into recovery with cmd: fastboot boot TWRP.img (TWRP or your current custom recovery)
Then restore a nandroid backup or wipe data/system/dalvik
You can still flash the factory images. Fastboot mode is enough. Guide
suikerchiller said:
Now it constantly reboots (literally)
Click to expand...
Click to collapse
Stuck power button. Mash the power button really fast for 20 seconds to unstick whatever is in there.
gd6noob said:
reflash recovery?
Click to expand...
Click to collapse
can't flash anything, because phone is constantly rebooting. Have opened up the phone and took the battery out for 1 minute. Didn't help either. After starting up the phone I get stuck in the boot loop again.
Anyone else an idea?
suikerchiller said:
can't flash anything, because phone is constantly rebooting. Have opened up the phone and took the battery out for 1 minute. Didn't help either. After starting up the phone I get stuck in the boot loop again.
Anyone else an idea?
Click to expand...
Click to collapse
The phone doesn't reboot in the bootloader right?
If it doesn't either do what primokorn said or flash the factory image.
Sent from my Nexus 5
El Daddy said:
The phone doesn't reboot in the bootloader right?
If it doesn't either do what primokorn said or flash the factory image.
Sent from my Nexus 5
Click to expand...
Click to collapse
Well the issue is that it only stays for a fraction of a second in bootloader, which gives it enough time to navigate one step up or down. Not enough time to get into recovery.
How can I do what Primoken said? It doesn't seem to be possible to do a flash when the phone is constantly rebooting?
Thx for helping me out guys, much appreciated!
suikerchiller said:
Well the issue is that it only stays for a fraction of a second in bootloader, which gives it enough time to navigate one step up or down. Not enough time to get into recovery.
How can I do what Primoken said? It doesn't seem to be possible to do a flash when the phone is constantly rebooting?
Thx for helping me out guys, much appreciated!
Click to expand...
Click to collapse
Have you ever kept your phone in narrow pocket? Because it's definitely sounds to me like a stuck power button.
Simonna said:
Have you ever kept your phone in narrow pocket? Because it's definitely sounds to me like a stuck power button.
Click to expand...
Click to collapse
It's not a power issue. Also unscrewed my phone to see if that was what caused it. Nothing in there, mechanism functioned correctly.
UPDATE: For some reason my phone booted up out of nothing. I managed to flash an older ROM via CM Updater (through settings)- which seemed to work. Apps were updated and it was running normally. But after a couple of minutes it restarted out of the blue and now back to square one again.
Guess there's a chance I'll probably get a normal start up soon. Is it a good idea to do a factory whipe restart through the settings menu? Or is Primokorn's method safer?
suikerchiller said:
...Or is Primokorn's method safer?
Click to expand...
Click to collapse
Yes.
I recently decided to upgrade to 4.4.4 kit kat.
Really dont know a lot about phones, but I've been working with computers for so long I thought it would be easy.....Little did I know....
Basically I used CMW? to flash the rom after checking using a root checker that my phone was definitely rooted. After trying to flash the phone turned off, and is now stuck in a permanent loop from the lg logo to a little green robot. When I plug it into the computer the time between each loop isn't long enough to do anything with it, and the recovery menu just wont work !
I should say when I hold volume down and the power button all I get is a hard reset option, and even when I do it nothing changes.
I really dont know what to do to break the loop, Please help!
The phone is an LG optimus g pro f240...all this for a transparent information bar >.>
oxmojojojoxo said:
I recently decided to upgrade to 4.4.4 kit kat.
Really dont know a lot about phones, but I've been working with computers for so long I thought it would be easy.....Little did I know....
Basically I used CMW? to flash the rom after checking using a root checker that my phone was definitely rooted. After trying to flash the phone turned off, and is now stuck in a permanent loop from the lg logo to a little green robot. When I plug it into the computer the time between each loop isn't long enough to do anything with it, and the recovery menu just wont work !
I should say when I hold volume down and the power button all I get is a hard reset option, and even when I do it nothing changes.
I really dont know what to do to break the loop, Please help!
The phone is an LG optimus g pro f240...all this for a transparent information bar >.>
Click to expand...
Click to collapse
Did you make a backup before you tried the upgrade?
thenookieforlife3 said:
Did you make a backup before you tried the upgrade?
Click to expand...
Click to collapse
No I didn't, but even if I did I cant use it. The phone has no recovery menu at all. Wont even charge so the time I have to fix it is limited. 40% battery left atm.....really stressed, its brand new.
oxmojojojoxo said:
No I didn't, but even if I did I cant use it. The phone has no recovery menu at all. Wont even charge so the time I have to fix it is limited. 40% battery left atm.....really stressed, its brand new.
Click to expand...
Click to collapse
You have an sdcard slot in your phone, right?
thenookieforlife3 said:
You have an sdcard slot in your phone, right?
Click to expand...
Click to collapse
Yes, I had an sd card in it with recovery stuff, and the old rom. Nothing happened. What should I do to make something happen?
oxmojojojoxo said:
Yes, I had an sd card in it with recovery stuff, and the old rom. Nothing happened. What should I do to make something happen?
Click to expand...
Click to collapse
Whew. At least you have an sdcard slot, that gives us hope!
You'll need an sdcard adapter. Plug your sdcard into your PC, and write the appropriate ClockworkMod image for your device to the sdcard. Plug your sdcard back into your phone, and reboot, but ONLY use the power button, nothing else.
You should be successfully booted into CWM. Write back for more instructions if that works.
And don't forget to thank my posts if I helped!
thenookieforlife3 said:
Whew. At least you have an sdcard slot, that gives us hope!
You'll need an sdcard adapter. Plug your sdcard into your PC, and write the appropriate ClockworkMod image for your device to the sdcard. Plug your sdcard back into your phone, and reboot, but ONLY use the power button, nothing else.
You should be successfully booted into CWM. Write back for more instructions if that works.
And don't forget to thank my posts if I helped!
Click to expand...
Click to collapse
I will thank a lot when I get this sorted...promise !
Ok I checked cwm and I cant find a rom for my phone !
Pretty confused. I'd like to return to the stock mod is that possible?
What is the "stock mod"?
EDIT - Just found this site, it may be of use to you: Hard Reset LG Optimus G Pro f240.
I tried all that, nothing doing.
The original rom was kit kat 4.4.2 I think...maybe 4.4.1
Any chance they might work?
Going back to 4.4 would be the best idea in my opinion.
The question is how!
shouldn't there be some sort of management suite for LG? sony has pc companion, and last night i found myself in the exact same situation as you, and i was able to repair my phone, because i messed it up and it was boot-looping.
ruecian20 said:
shouldn't there be some sort of management suite for LG? sony has pc companion, and last night i found myself in the exact same situation as you, and i was able to repair my phone, because i messed it up and it was boot-looping.
Click to expand...
Click to collapse
Yeah there is, but the boot loop is so short, a few seconds really, that I dont have time to do anything. The computer never registers is.
I tried everything I can think of....even with the sd card in nothing happens.....Just goes from the green robot trying to repair off then back to the lg logo then back to the green robot....sigh, is it possible to be perma boot looped?
I always read that when the phone is turning on there is hope. Looks really unlikely for me.
Hello guys,
I apologize if this has been solved before but I wasn't able to find anything on it.
I have a oneplus one phone which I had running Ressurection Rom (I don't have the details as my father was using it for the last 2 years).
He dropped the phone and gave it to a shop for repairing of the screen. They repaired the screen but now they have somehow messed with the software where I am UNABLE TO BOOT TO FASTBOOT OR TRWP. The function of holding POWER + VOLUME DOWN or POWER + VOLUME UP doesn't work. When I attempt those two options, it still continues to boot as it normally would and then start optimizing apps. Does that for about 45 minutes and then just restarts and repeats the process.
I haven't messed around with android stuff for about a year now, so simplified instructions (rather step by step) would be extremely helpful.
Thank you so much for taking the time.
NSingh95 said:
Hello guys,
I apologize if this has been solved before but I wasn't able to find anything on it.
I have a oneplus one phone which I had running Ressurection Rom (I don't have the details as my father was using it for the last 2 years).
He dropped the phone and gave it to a shop for repairing of the screen. They repaired the screen but now they have somehow messed with the software where I am UNABLE TO BOOT TO FASTBOOT OR TRWP. The function of holding POWER + VOLUME DOWN or POWER + VOLUME UP doesn't work. When I attempt those two options, it still continues to boot as it normally would and then start optimizing apps. Does that for about 45 minutes and then just restarts and repeats the process.
I haven't messed around with android stuff for about a year now, so simplified instructions (rather step by step) would be extremely helpful.
Thank you so much for taking the time.
Click to expand...
Click to collapse
This condition is called hard brick.To fix this,
https://forums.oneplus.net/threads/...ol-restore-stock-cm11s-fix-bricks-etc.237827/
Use this tool on winXp or win7(don't use 8 or 10),run it as administrator.Make sure you install the drivers correctly,good luck!
Mr.Ak said:
This condition is called hard brick.To fix this,
https://forums.oneplus.net/threads/...ol-restore-stock-cm11s-fix-bricks-etc.237827/
Use this tool on winXp or win7(don't use 8 or 10),run it as administrator.Make sure you install the drivers correctly,good luck!
Click to expand...
Click to collapse
Hello, Thank you for your response.
I have tried the instructions that you provided and I am stuck in a place where the "Samsung" drivers for OPO are installed but the phone isn't detected by the computer when its plugged in. I assume that means the drivers aren't installed correctly. However, when I do open device manager and attempt to update or uninstall the drivers there isn't a device there that is representative of OPO.
How do I get to the point where the drivers can be installed without me having access to the phone. I can't really go into a bricked phone and turn on ADB etc.'
Thank you
NSingh95 said:
Hello, Thank you for your response.
I have tried the instructions that you provided and I am stuck in a place where the "Samsung" drivers for OPO are installed but the phone isn't detected by the computer when its plugged in. I assume that means the drivers aren't installed correctly. However, when I do open device manager and attempt to update or uninstall the drivers there isn't a device there that is representative of OPO.
How do I get to the point where the drivers can be installed without me having access to the phone. I can't really go into a bricked phone and turn on ADB etc.'
Thank you
Click to expand...
Click to collapse
Read the whole thread.
https://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Use Xp or win7(must).
Okay so I have attempted this a tiring number of times; initially the phone at least was going on to loading apps, now it just flashes on the Resurrection load screen and doesn't change at all. Also when I try to boot into recovery/fastboot, nothing happens.
I have also tried installing different drivers from like a samsung phone, nexus but to no avail.
Is there anyone who can perhaps TEAMVIEW me and help out or live chat?
NSingh95 said:
Okay so I have attempted this a tiring number of times; initially the phone at least was going on to loading apps, now it just flashes on the Resurrection load screen and doesn't change at all. Also when I try to boot into recovery/fastboot, nothing happens.
I have also tried installing different drivers from like a samsung phone, nexus but to no avail.
Is there anyone who can perhaps TEAMVIEW me and help out or live chat?
Click to expand...
Click to collapse
Device on Twrp works fine?
Mr.Ak said:
Device on Twrp works fine?
Click to expand...
Click to collapse
I'm not able to boot into twrp.
NSingh95 said:
I'm not able to boot into twrp.
Click to expand...
Click to collapse
@psxda97 ,can this be a battery issue?
Mr.Ak said:
@psxda97 ,can this be a battery issue?
Click to expand...
Click to collapse
I don't think so. If it is a battery issue he could go to fastboot since fastboot only uses a small amount of charge.
NSingh95 said:
I'm not able to boot into twrp.
Click to expand...
Click to collapse
Try turning on your phone while connected to a charger.
psxda97 said:
I don't think so. If it is a battery issue he could go to fastboot since fastboot only uses a small amount of charge.
Try turning on your phone while connected to a charger.
Click to expand...
Click to collapse
I have, its definitely not a battery issue, because i have seen the phone stay on for an hour just on the bootscreen without being plugged in or anything.
NSingh95 said:
I have, its definitely not a battery issue, because i have seen the phone stay on for an hour just on the bootscreen without being plugged in or anything.
Click to expand...
Click to collapse
Most probably your volume buttons were messed up during the repair. That's the only reason I can think of. There are some videos on YouTube about fixing the volume buttons.