I left my phone on the pad for charging and accidentally, looking for something else in Settings, found a rather strange set of settings...
Namely its was set for "adaptive refresh rate 120 Hz" + screen resolution on "WQHD+ 3088 x 1440" also Power mode was on "Optimized" ...
The option to change to adaptive refresh rate 120Hz was marked as "On" but at the same time was not highlighted as changeable...
It looks like 120 Hz active and working on WQHD+... Or it was just some glitch in the system...
Did anyone encounter maybe the same...
Do you have adaptive power saving on in power mode setting?
Sent from my SM-N986U using Tapatalk
rsacipher said:
Do you have adaptive power saving on in power mode setting?
Sent from my SM-N986U using Tapatalk
Click to expand...
Click to collapse
Yes, that was set "On"...
I think I know what your phone did. If you had it set to wqhd and 120 hz prior to the phone going into power saver mode it got "locked in". That's why I think your unable to change it back.
Sent from my SM-N986U1 using Tapatalk
terpi74 said:
Yes, that was set "On"...
Click to expand...
Click to collapse
If you select it to off is the setting available?
Sent from my SM-N986U using Tapatalk
rsacipher said:
If you select it to off is the setting available?
Sent from my SM-N986U using Tapatalk
Click to expand...
Click to collapse
That set off settings "got me by surprise"... I didn't try that if it gonna works...
Gonna check...
rsacipher said:
If you select it to off is the setting available?
Sent from my SM-N986U using Tapatalk
Click to expand...
Click to collapse
When is set to "Off" it didn't work that way...
So it's kinda tricky... I used quick shortcut maker and had motion smoothness as a shortcut. Change the refresh rate to 60 then have the shortcut maker selection on 120 but don't click apply it yet... Change the display to qhd and back to the shortcut and click apply. Settings are set but it's not 120hz
racingmatt1 said:
I think I know what your phone did. If you had it set to wqhd and 120 hz prior to the phone going into power saver mode it got "locked in". That's why I think your unable to change it back.
Sent from my SM-N986U1 using Tapatalk
Click to expand...
Click to collapse
There is no such thing as WQHD AND 120 hz, it's either one or another...so he couldn't set it prior to anything
Sent from nowhere over the air...
Rapier said:
There is no such thing as WQHD AND 120 hz, it's either one or another...so he couldn't set it prior to anything
Sent from nowhere over the air...
Click to expand...
Click to collapse
While the both don't happen at the same time... It's possible to get those settings to show at the same time.
GDHAMTON7 said:
While the both don't happen at the same time... It's possible to get those settings to show at the same time.
Click to expand...
Click to collapse
Yes, I know that. Why I quoted that post was due to the allegation that probably the user got the issue because he set both resolution and refresh rate that way before... I just stated that this is not possible
Sent from nowhere over the air...
Related
Anyone have their display setting reset to max brightness after taking a picture or exit out of the camera app?
Sometimes when I take a picture with flash the phone will shutoff. When I turn it back on the brightness is at 100%.
Sent from my HTC Sensation 4G using XDA App
knobgoo said:
Sometimes when I take a picture with flash the phone will shutoff. When I turn it back on the brightness is at 100%.
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
I don't seem to have this issue, but i don't take than many pics with the flash on cuz it blinds the people
fryrice8850 said:
Anyone have their display setting reset to max brightness after taking a picture or exit out of the camera app?
Click to expand...
Click to collapse
Yes, actually. I recently noticed my brightness setting back to max often, and now I see it's exactly what you say
Sent from my HTC Sensation 4g with extreme prejudice
When i go into the camera the brightness goes to full automatically and then when i exit it goes back to my previous setting
Sent from my HTC Sensation Z710e using Tapatalk
knobgoo said:
Sometimes when I take a picture with flash the phone will shutoff. When I turn it back on the brightness is at 100%.
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
I think you got bigger issues than just brightness.
Sent from my HTC Sensation 4G using XDA Premium App
fryrice8850 said:
Anyone have their display setting reset to max brightness after taking a picture or exit out of the camera app?
Click to expand...
Click to collapse
yep, same problem here. I set a Tasker profile to turn auto brightness back on when exiting the camera app to fix it.
pakraider said:
yep, same problem here. I set a Tasker profile to turn auto brightness back on when exiting the camera app to fix it.
Click to expand...
Click to collapse
Where in settings do I find the tasker profile?
gottabekin said:
Where in settings do I find the tasker profile?
Click to expand...
Click to collapse
Tasker is an app in the market
Sent from my HTC Sensation Z710e using XDA Premium App
I just wanted to add that it also happens when the phone comes out of a low power state. So if you have your low power profile click in at say 25%, then charge your phone above that, your brightness will be back to 100%.
I am also using tasker to set the brightness to auto-adjust every 2 minutes. Tasker is $6.95 in the market (but very useful for other things too).
Have had this happen a few times. Never knew the cause, just remember being blinded in the dark, lol
Sent from my HTC Sensation Z710e using xda premium
I have this same issue. Driving me crazy! Thanks for suggesting it might be the camera app. I think this is true. I'm going to try to remember if I ever open the camera to go into settings and reset Auto Brightness. Very annoying, but I do seem to think its related to the camera app.
When i go into the camera the brightness goes to full automatically and then when i exit it goes back to my previous setting
Click to expand...
Click to collapse
Same here. But if i use the auto brightness i have the issue that the brightness is still at 100% when leaving the cameraapp. Not funny i a dark room or outside at night
One thing I miss from stock was the eco mode low brightness level. How can I modify CM to lower the brightness on my P3113?
Thanks
Cp
Settings to display to brightness?
Sent from my GT-P3110 using xda app-developers app
CptanPanic said:
One thing I miss from stock was the eco mode low brightness level. How can I modify CM to lower the brightness on my P3113?
Thanks
Cp
Click to expand...
Click to collapse
Its simple drag right side notification bar. There you will get adjust brightness option....
Sent from my GT-P3100 using xda app-developers app
No I mean that I would like the brightness overall to be less. Including the lowest auto setting and the manual setting.
Sent from my GT-P3110 using Tapatalk 2
I miss display levels too
I'm missing it too.
For those of you who don't remember it, there was an "Edit Levels..." screen that took you to the screen shown in this post:
http://forum.xda-developers.com/showpost.php?p=34513141&postcount=3
CptanPanic said:
One thing I miss from stock was the eco mode low brightness level. How can I modify CM to lower the brightness on my P3113?
Thanks
Cp
Click to expand...
Click to collapse
Trinition said:
I'm missing it too.
For those of you who don't remember it, there was an "Edit Levels..." screen that took you to the screen shown in this post:
http://forum.xda-developers.com/showpost.php?p=34513141&postcount=3
Click to expand...
Click to collapse
Yes this is what I was looking for. Seems it hasn't made it to 10.1 yet, in the meantime I found an app called Lux that works.
Sent from my GT-P3110 using Tapatalk 2
Does anyone have any issues with the color being darker on the middle of the screen horizontally, when night mode is turned on and with low brightness? I had issues with 9.5.3 and now on 9.5.7. 9.5.4 did not have the same issue.
Sent from my GM1911 using Tapatalk
vickyjusme said:
Does anyone have any issues with the color being darker on the middle of the screen horizontally, when night mode is turned on and with low brightness? I had issues with 9.5.3 and now on 9.5.7. 9.5.4 did not have the same issue.
Click to expand...
Click to collapse
I don't ever use night mode myself, but perhaps this is worth a shot... Check out the "OnePlus Laboratory" settings menu and turn on the experimental DC dimming (or perhaps it's on already and you need to turn it off?). This is totally a shot in the dark though.
Sent from my OnePlus7Pro using XDA Labs
stmims1124 said:
I don't ever use night mode myself, but perhaps this is worth a shot... Check out the "OnePlus Laboratory" settings menu and turn on the experimental DC dimming (or perhaps it's on already and you need to turn it off?). This is totally a shot in the dark though.
Sent from my OnePlus7Pro using XDA Labs
Click to expand...
Click to collapse
Yupp I do have the option ON. I'll try deactivating it.
Sent from my GM1911 using Tapatalk
stmims1124 said:
I don't ever use night mode myself, but perhaps this is worth a shot... Check out the "OnePlus Laboratory" settings menu and turn on the experimental DC dimming (or perhaps it's on already and you need to turn it off?). This is totally a shot in the dark though.
Sent from my OnePlus7Pro using XDA Labs
Click to expand...
Click to collapse
Yupp that does it. Thanks.
Sent from my GM1911 using Tapatalk
I turned off face filter but smoothing is still being done.
borijess said:
I turned off face filter but smoothing is still being done.
Click to expand...
Click to collapse
If you select filters icon from the top row on the right, then click on "face" you can select off.
Sent from my SM-N986U1 using Tapatalk
borijess said:
I turned off face filter but smoothing is still being done.
Click to expand...
Click to collapse
Funny enough the selfie camera doesn't smooth and is very sharp
Sent from my SM-N986U1 using Tapatalk
I'm not sure if it's my eyes or my phone isn't refreshing properly but I can't see a difference when scrolling regardless which setting I choose under motion smoothness.
Is there a way to tell what the refresh rate is when adaptive mode is selected?
Sent from my SM-N986U using Tapatalk
rsacipher said:
I'm not sure if it's my eyes or my phone isn't refreshing properly but I can't see a difference when scrolling regardless which setting I choose under motion smoothness.
Is there a way to tell what the refresh rate is when adaptive mode is selected?
Click to expand...
Click to collapse
I agree.
People see different things and can also soon adapt to the smoothness.
I can certainly see the difference when I use my N10+ 5G to when I'm using the N20 Ultra 5G.
rsacipher said:
I'm not sure if it's my eyes or my phone isn't refreshing properly but I can't see a difference when scrolling regardless which setting I choose under motion smoothness.
Is there a way to tell what the refresh rate is when adaptive mode is selected?
Sent from my SM-N986U using Tapatalk
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.yannichoongs.screenrefreshrate
dougmcsp said:
https://play.google.com/store/apps/details?id=com.yannichoongs.screenrefreshrate
Click to expand...
Click to collapse
Thanks I don't know why I didn't think to look for an app.
I wasn't sure about that one since it only had a few hundred downloads but I downloaded this and the refresh rate is correct.
https://play.google.com/store/apps/details?id=accugadget.refreshrateCheck
Sent from my SM-N986U using Tapatalk
rsacipher said:
Thanks I don't know why I didn't think to look for an app.
I wasn't sure about that one since it only had a few hundred downloads but I downloaded this and the refresh rate is correct.
https://play.google.com/store/apps/details?id=accugadget.refreshrateCheck
Click to expand...
Click to collapse
This app doesn't have an overlay feature. The app suggested by @dougmcsp will show the refresh rate as an overlay on any app/screen on the phone.
displayhz.com
Sent from my [device_name] using XDA-Developers Legacy app