I recently got a pair of Galaxy Buds Live and shortly after pairing I noticed that calls start on the buds, but about 10 seconds later the call switches to speaker phone. The Bluetooth button is still showing active in the call, but it is definitely coming over the speaker. I then tried a call in my vehicle, and it gave the same result. ? Anyone else experiencing anything like this?
Check the sensors how they are active... I guess the buds have sensors to "know" when you're wearing them (in your ear) and somehow they don't register properly. As a test, disable that functionaluty and see if it works better or try to reposition both in your ears
Sent from nowhere over the air...
Kinda similar issue
I have kind-of the same issue. My issue is, I can be listening on my budslive just fine but if I go to take a call or receive a call it shows on my phone as connected on Bluetooth but I don't hear anything BUT I can hear the button presses in the earbuds.
Related
I have a Sony Ericsson A2DP Headset. It connects fine for both calls and for listening to music. There is however one small annoying issue.
If I'm listening to music (generally I have to have the volume up quite high) and a phonecall comes in and I take the call; something weird happens when the call ends.
The bluetooth connection is dropped and basically everyone in the vicinity gets and earful of whatever music I was playing before the call. This can be pretty bad if I'm sitting at one of our quiet, open plan offices. If I press the play buttin on my headset it reconnects and audio comes in over the headset again but it's not good to have to do this after every call.
Anyone else had this issue?
Thanks in advance.
Whenever I encounter a quirky bluetooth problem, deleting the pair relationship and repairing sometimes helps.
Works fine for me... Could be headset specific, as I use Motorola S9's and Plantronics 855's without the issue you're having.
It does it for me too. After the phone call the music is played through the phone's speaker for just a couple of seconds, then gets transferred to the headset in mono for a couple of seconds before reverting back to normal.
I can see this would be annoying if you were in a quiet place.
Sony Headset
and me, funnily enough I have a Samsung MP3 player and the headset works perectly with that - good old HTC
I noticed recently that I can make a phone call out using my BT headset and MSVC and when it connects, the BT drops the call and my phone becomes the reciever. Annoying when I'm waiting for the call to connect, and the person is already there on the line going "hello?hello?"
I also noticed that when I get a call, sometimes the same thing happens. My phone rings, when I press my headset to answer sometimes, it goes straight to phone.
Sounds like the BT is loosing connection...
Same here. I hear nothing on BT and I bring the phone up to my ear and the person is going "Hello?" "Hellloooo???" It is kind of annoying. I am using a Jabra BT8010 headset.
Hi all,
well, problem is there since I purchased Huawei S7 Slim. I've tried it with several BT headsets and always the same problem.
It's paired and connected pretty fast, but when in call, other party can't hear me well while he is talking. It seems like tablet can't send my voice until other (incoming) voice is on. When other party stops talking I can talk and sound is sent normaly.
I've noticed this to be even bigger problem when other party is in some noisy place (on the street, listening to the music etc) and all those noises are sent as a sound to me, so everything I say gets muted (or in best case choppy).
Anyway, I can hear other party good, there is no problem in opposite direction, just outgoing voice get muted.
When I switch to speaker everything is good.
I've read somewhere that this is problem in Froyo, but my question is if anybody else got this problem and if there is some kind of solution. Wired headset works fine but I would like to get rid of it and move to BT.
Headset is Nokia BH 105, but I've tried BH 104 as well. Both headsets works just fine with other phones, and it seems to support A2DP, HSP etc
One more thing... when I try to listen music no sound comes to BT headset...
Hope I was clear with question and looking forward to your responses. Thanks in advance.
OK, so I've noticed since I bought my phone that while I'm driving to work, with the bluetooth on on my headset, and when I plug in the Aux 3.5mm cable into the phone, the music transfers to the Car Audio system like it's supposed to. Keep in mind I just bought my Nexus 5 last week. While into my drive (10 to 15 minutes), all of a sudden the music stops playing in the car and switches automatically back to the headset. What's causing this? Anyone experience the same issue? I know I can turn off my bluetooth headset, but if I get a call, I want to able to answer it quickly. I'm currently using the A2DP Plantronics M50.
Another issue not in the subject because I was cut off from the character limit:
How come when I have bluetooth turned on and answer the phone physically on the phone by swiping the call answer icon to the right, the audio automatically defaults to the bluetooth headset. Why? It should route the audio to the phones earpiece, not the bluetooth. If I wanted to answer with bluetooth, I would press the bluetooth answer button. This happened on my Nexus 4 as well.
Anyone with info please?
I have the same issue. Oh wait, i'm the OP...
Sent from my wondrous Nexus numeral 5
I am having issues figuring out how to best manage bluetooth on my device.
I use a bluetooth headset, and separate bluetooth headphones.
I am having the following problems:
1. If I am on a call and my headphones are on lying on my desk from an earlier music session, when I answer the call it goes to headphones. Thats OK, but sometimes I just want to speak on the phone. So I hit the bluetooth icon on my call screen to just speak into the handset. This works but after a few seconds it automatically keeps connecting unless I turn off the headphones. Is there any way to keep this from happening other than switching it off (which sometimes is a pain since it may be packed away in a bag, etc.)
2. Similar problem except between bluetooth devices. The call may get answered by my headset, and then during the call it ends up switching to the headphones. Is there any way to prioritize between two different bluetooth audio devices that are both connected in terms of which one you prefer to handle the phone calls?
Thanks.