Hi all,
well, problem is there since I purchased Huawei S7 Slim. I've tried it with several BT headsets and always the same problem.
It's paired and connected pretty fast, but when in call, other party can't hear me well while he is talking. It seems like tablet can't send my voice until other (incoming) voice is on. When other party stops talking I can talk and sound is sent normaly.
I've noticed this to be even bigger problem when other party is in some noisy place (on the street, listening to the music etc) and all those noises are sent as a sound to me, so everything I say gets muted (or in best case choppy).
Anyway, I can hear other party good, there is no problem in opposite direction, just outgoing voice get muted.
When I switch to speaker everything is good.
I've read somewhere that this is problem in Froyo, but my question is if anybody else got this problem and if there is some kind of solution. Wired headset works fine but I would like to get rid of it and move to BT.
Headset is Nokia BH 105, but I've tried BH 104 as well. Both headsets works just fine with other phones, and it seems to support A2DP, HSP etc
One more thing... when I try to listen music no sound comes to BT headset...
Hope I was clear with question and looking forward to your responses. Thanks in advance.
Related
Hi there!
I got my Trinity about 2 weeks ago and got I love that thing...she is so beautiful!
Yesterday I got a good deal on a Sony Ericsson HBH-DS200 Bluetooth Audio Device.
It connects via A2DP and then you can connect any std. 3,5mm jack headphone.
After I pair the devices everything works fine, handsfree and wirless stereo!
Now I disable Bluetooth and turn off the DS200 to shut it down.
Next time I restart Bluetooth and the DS200 it switches to Bluetooth Audio and all is well. But as soon as I try to play music it "skips" in 2-3 sec. jumps. This is as you can imagine not acceptable.
If I delete the conn. and repair it...it works again..up to the point where I turn it off and then on again.
Anybody have an idea?
thx!
pls search a2dpfix to sovel this bug.
but, it will make up to 90% cpu rate.
I got the HBH-DS200 headset, for music it works all fine.
But when i use it in a call the sound are really crappy. A lot of noice and very low volume.
I have tried my headset with other phones without this issue. does anyone have a soluton to have the same clear sound in a phone call as i have when lissen to music
I got the HBH-DS200 headset, for music it works all fine.
But when i use it in a call the sound are really crappy. A lot of noice and very low volume.
I have tried my headset with other phones without this issue. does anyone have a soluton to have the same clear sound in a phone call as i have when lissen to music
(Sorry i dident see this was wrong forum. Its a Tytn II i have)
hi there...
does anyone know how to make voip work with the correct (internal) speaker?
I installed the voip package as described in the wiki and works except for the problem that the sound comes from the speaker on the back of the phone...
did anyone get this to work with the vox phone?
i'm wondering if it's possible. i did manage though to get the volume lowered on Custel's Voip cab to the point where it doesn't "really" produce the echo. I'm thinking that's probably as good as it gets. Flip the phone around and use the 'volume lowered' speakerphone as the earpiece.
Seems to be an hardware issue.
When I use a bluetooth headset everything works fine.
I think that it works fine, because if you have connected your headset, everything comes to that headset, sound from earpiece and from speaker too.
When I use my headphones, sound goes out from the speaker AND headphones, at the same time. Boring, but what can we do...
Hi all!
I have a S710, working just fine exept using it as a phone
Placing a call using the phone works ok, without handsfree. People can hear me loud and clear, but when using my Plantronics Voyager 855 bluetooth handsfree, people i talk to almost cant hear me. The sound is sort of metallicfuzz in caracter. And also very low.
Ive now switched to my old phone (Sonyericsson M600i) and paired the voyager handsfree to it, working flawlesly. People can hear me loud and clear.
Is there any tweaks to apply to my S710 to at least increase the outgoing volume when using bluetooth handsfree?
I really like my S710 but now im stuck with the old M600i. I cant live without my bluetoothandsfree.
//Erik
I have a similar problem. I use SE HBH-DS970 headset. It used to work flawlessly on this same phone earlier, but now the microphone has simply stopped recognizing my voice.
Tested it on another phone, and the mic worked perfectly!
Sorry, double post. Moderator please delete this
I have a Sony Ericsson A2DP Headset. It connects fine for both calls and for listening to music. There is however one small annoying issue.
If I'm listening to music (generally I have to have the volume up quite high) and a phonecall comes in and I take the call; something weird happens when the call ends.
The bluetooth connection is dropped and basically everyone in the vicinity gets and earful of whatever music I was playing before the call. This can be pretty bad if I'm sitting at one of our quiet, open plan offices. If I press the play buttin on my headset it reconnects and audio comes in over the headset again but it's not good to have to do this after every call.
Anyone else had this issue?
Thanks in advance.
Whenever I encounter a quirky bluetooth problem, deleting the pair relationship and repairing sometimes helps.
Works fine for me... Could be headset specific, as I use Motorola S9's and Plantronics 855's without the issue you're having.
It does it for me too. After the phone call the music is played through the phone's speaker for just a couple of seconds, then gets transferred to the headset in mono for a couple of seconds before reverting back to normal.
I can see this would be annoying if you were in a quiet place.
Sony Headset
and me, funnily enough I have a Samsung MP3 player and the headset works perectly with that - good old HTC
Is there anything available that will force my HD2 to use the internal mic while a headset is plugged into the 3.5mm socket?
I often use my HD2 to listen to music in my car using a 3.5mm jack to jack cable into the aux in port just near my handbrake which works a charm.
When I get a call the music is interrupted and if I answer it I can hear the caller through my car speakers however they can't hear me as the phone is in headset mode and is expecting a mic to be plugged in.
I don't think it's a simple case of re-routing which mic is used as while that may technically work the caller would be able to hear themselves delayed through my cars sound system. I need the phone to send the mic into speaker mode so it has a detection system that stops the caller hearing themselves but send the output through the headset socket.
I hope that makes sense?
seems strange that it does not working .. i use this way to listen music & gps instructions and it is working ok, with the phone's microphone.. try i different 3.5mm jack (stereo) .. or you have a cooked rom ?
I just tried a different cable and it's working! strange for some reason the HD2 must have thought my cable was headset?
Thanks!
yeah it dosnt work cuz if u look @ the original headset it has 3 lines which meant 2 for the stereo ear pice and 1 for the mic, i have the same prob i dnt like the origenal headset so i use mine which means i have to unplug it every time i get a call, but i think the only way to use good headset with mic is to buy the iphone headset, its the same priciple with a better sound quality of the headset
If your jack has only 3 contacts, the phone can sense there's no 4th one, so there's no mic, and uses the internal mic. If your cable has 4 contacts, it will try to use external mic even if there's actually none.
oooo yeah u r right, lol, jst tried it it work
thnx man
wow, i was just asking myself the same question. i have a pair of sennheiser earphones(without mic), when i take an incoming call the other side cannot hear me most of times. but, sometimes the internal microphone is activated and i can speak using my earphones. this seems a quite random problem, i don't understand. even with skype, sometime i can use earphones, some other time i'm forced to unplug using the loudspeaker...boh...
i want my phone mic since my built in carstero mic is to far away
On a similar note, is it possible to have the internal speaker announce GPS instructions while I'm playing music via Bluetooth?
spyrale said:
wow, i was just asking myself the same question. i have a pair of sennheiser earphones(without mic), when i take an incoming call the other side cannot hear me most of times. but, sometimes the internal microphone is activated and i can speak using my earphones. this seems a quite random problem, i don't understand. even with skype, sometime i can use earphones, some other time i'm forced to unplug using the loudspeaker...boh...
Click to expand...
Click to collapse
yeah .. im experiencing the same problem as well. Its random . Therefore, i do not know if the HD2 supports the use of mic when we plug in out earphones. From what i tried, sometimes im able. Other times im not . i dont know whats wrong as well. Anyone here has a solution ???
no one knows or has any solution ??
elyl said:
On a similar note, is it possible to have the internal speaker announce GPS instructions while I'm playing music via Bluetooth?
Click to expand...
Click to collapse
if you want the voice on the car stero the ngo to the bluetooth settings moor or advance whatever and select play system sounds or something like that