Database Info

[Request] persist.img

Hi, is anyone here able to backup their persist.img and share it here? I somehow corrupted my partition and my sensors aren't working. I don't know if this applies to this device, but I found this guide on a Xiaomi Mi A1 guide (https://xiaomifirmware.com/guides-and-tips/restore-persist-partition-xiaomi-mi-a1/), or else you can try this (https://youtu.be/LGkDZtQ_ERE?t=124) from 2:04 . If you can achieve the result with a different method you can also share the file here. Thanks in advance to whoever does this.

You're going to need to specify which exact build you're looking for this from...
..or you could just use "Payload Dumper" to extract all the img files from the released packages :
https://androidfilehost.com/?fid=818070582850510260

Didn't think it would matter, anyways, I'm on 9.5.5 GM1913, but if needed I can switch to 9.5.4

@djsubterrain https://i.imgur.com/Z1GyAlR.png no persist here. Do you mind sharing yours?

MrVoshel said:
@djsubterrain https://i.imgur.com/Z1GyAlR.png no persist here. Do you mind sharing yours?
Click to expand...
Click to collapse
Unfortunately TWRP doesn't list that as a backup option so I don't think I can unless you know how.

djsubterrain said:
Unfortunately TWRP doesn't list that as a backup option so I don't think I can unless you know how.
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=ma.wanam.partitions&hl=it
can you try using this app?

Gm1917 9.5.6 if it helps you
https://www.dropbox.com/s/8q8hy66obsnfdmw/persist_backup_2019-05-31_17-36-15.img?dl=0
Sent from my GM1917 using Tapatalk

OK, Here you go. Just to confirm I'm on EU 9.5.5, I have Rice magisk module enabled and ElementalX latest kernel, also rooted with latest Magisk :
https://www.androidfilehost.com/?fid=6006931924117886178
The folder contained the img and 2 other files so I just stuck them in there too.
I note that you're in the US so, the post above mine is T-Mobile version (9.5.6 isn't on other versions I don't think), if that's the one you have you might want to go with theirs.

Thanks guys, both working. I'm not in the US, I randomly chose a country. Anyways I flashed the GM1917 9.5.6 on my GM1913 9.5.4, and no problems. Also tested the 9.5.5 GM1913 and working. I don't think persist is phone/update-dependant, also because OnePlus hasn't done any updates or specific changes to the sensors directly from the persist partition. For anyone interested, just get a persist.img, reboot to fastboot and connect your phone to the computer, type this command into fastboot "fastboot flash persist persist_name_xxxx.img" and reboot.

MrVoshel said:
Thanks guys, both working. I'm not in the US, I randomly chose a country. Anyways I flashed the GM1917 9.5.6 on my GM1913 9.5.4, and no problems. Also tested the 9.5.5 GM1913 and working. I don't think persist is phone/update-dependant, also because OnePlus hasn't done any updates or specific changes to the sensors directly from the persist partition. For anyone interested, just get a persist.img, reboot to fastboot and connect your phone to the computer, type this command into fastboot "fastboot flash persist persist_name_xxxx.img" and reboot.
Click to expand...
Click to collapse
Glad to hear you're back up and running.

Glad to hear it worked. I don't think 9.5.6 is a T-Mobile patch. Non T-Mobile phones were getting it ota and it fixed an issue for Verizon users. I think 1+is unifying their build numbers back together.
Sent from my GM1917 using Tapatalk

MrVoshel said:
Thanks guys, both working. I'm not in the US, I randomly chose a country. Anyways I flashed the GM1917 9.5.6 on my GM1913 9.5.4, and no problems. Also tested the 9.5.5 GM1913 and working. I don't think persist is phone/update-dependant, also because OnePlus hasn't done any updates or specific changes to the sensors directly from the persist partition. For anyone interested, just get a persist.img, reboot to fastboot and connect your phone to the computer, type this command into fastboot "fastboot flash persist persist_name_xxxx.img" and reboot.
Click to expand...
Click to collapse
if you mess up persist.img
does it flash from the MSM tool?

virtyx said:
if you mess up persist.img
does it flash from the MSM tool?
Click to expand...
Click to collapse
It didn't for me, took a little bit to figure out why my wifi wasn't working with any of the custom kernels that inline the wifi module in the boot img. Used msm tool as well as fastboot ROM... No luck. After finding this persist img and fastboot flashing, no problem since. Was on 9.5.7 Global when flashed.

zoman7663 said:
It didn't for me, took a little bit to figure out why my wifi wasn't working with any of the custom kernels that inline the wifi module in the boot img. Used msm tool as well as fastboot ROM... No luck. After finding this persist img and fastboot flashing, no problem since. Was on 9.5.7 Global when flashed.
Click to expand...
Click to collapse
really? i wouldve thought the MSM tool would bring it back
do you have the persist.img? do you have a link for those of us who break things.

virtyx said:
really? i wouldve thought the MSM tool would bring it back
do you have the persist.img? do you have a link for those of us who break things.
Click to expand...
Click to collapse
I got the img from this thread, first or second post...

zoman7663 said:
I got the img from this thread, first or second post...
Click to expand...
Click to collapse
Thank you
When fastboot flashing does it wipe persist before flashing the IMG?

virtyx said:
Thank you
When fastboot flashing does it wipe persist before flashing the IMG?
Click to expand...
Click to collapse
Not that I'm aware of, I think it just overwrites it

[/COLOR]
zoman7663 said:
Not that I'm aware of, I think it just overwrites it
Click to expand...
Click to collapse
great! thanks

Sorry to ressurect an old thread. I was just wondering if this persist.img(or this method) can be used to flash the relevant persist.img onto a oneplus 7t pro to restore widevine L1?

Rooted. Now wifi doesn't work. Neither do speakers.

I rooted following Maxwell's tutorial (OnePlus 7 Pro - How to Unlock the Bootloader, Install TWRP, and Root with Magisk
).
Now that all is said and done, and my phone is rooted, I noticed that:
1) The wifi does not work. It will not let me enable wifi. Just keeps switching back to off.
2) The speakers don't work.
I need to know how to fix it. What do I do?
I am new to android so I am not sure the steps needed to fix this botched install/operating system/root whatever

U prob flashed the wrong boot.img, make sure to flash the correct model and OS version.
What model and OS version do you have?
download

Bradl79 said:
U prob flashed the wrong boot.img, make sure to flash the correct model and OS version.
What model and OS version do you have?
Click to expand...
Click to collapse
This is probably an error on my end then. I chose "Global 1917 1911" but my about phone page says "1913", however, my phone also says 9.5.1 and there is no 9.5.1 (under 1913) in the link you provided. Do I need to upgrade my OS first before retrying?

jfny100 said:
This is probably an error on my end then. I chose "Global 1917 1911" but my about phone page says "1913", however, my phone also says 9.5.1 and there is no 9.5.1 (under 1913) in the link you provided. Do I need to upgrade my OS first before retrying?
Click to expand...
Click to collapse
yes you will need to upgrade, there was no 9.5.1 full zip released for us to have patched the boot.img. So update and then patch the correct OS and Model version you update to. Let us know if you have any other issues.

I swear nobody reads the threads before starting. Your wifi is disabled because your rooted boot image does not match the version you should have.
Just flash one of the kernels in the roms section, I'm using ElementalX 1.10, wifi will come back up.

Bradl79 said:
yes you will need to upgrade, there was no 9.5.1 full zip released for us to have patched the boot.img. So update and then patch the correct OS and Model version you update to. Let us know if you have any other issues.
Click to expand...
Click to collapse
Okay. That was it (flashing the wrong boot.img) It's working now - I upgraded to latest OS. Downloaded correct boot.img. Redid the root process with correct files this time, and it worked. Wifi is good. Speakers are good. Everything is good. Thanks for the help. Also, I removed any criticism of the tutorial creators in my post since it turns out I was the idiot. I'm brand new to android though so go easy on me.

djsubterrain said:
I swear nobody reads the threads before starting. Your wifi is disabled because your rooted boot image does not match the version you should have.
Just flash one of the kernels in the roms section, I'm using ElementalX 1.10, wifi will come back up.
Click to expand...
Click to collapse
I didn't read the post until after I encountered errors. I was going off of the video. One problem I had was that the video assumed I had a basic knowledge of some steps, so they didn't mention them. I did not have this knowledge since I am brand new to android. Anyways. I was able to fix these errors via the steps discussed in earlier comments. Everything is working now. I removed any criticism of the tutorial creators from this post since it turns out I'm the idiot.

Glad you got it working

Why are people even flashing boot images? Just unlock bootloader, boot twrp from fastboot, flash twrp, flash magisk, all done.

JedixJarf said:
Why are people even flashing boot images? Just unlock bootloader, boot twrp from fastboot, flash twrp, flash magisk, all done.
Click to expand...
Click to collapse
BC that is just an extra step not really needed, I haven't even flashed twrp on my device yet, if I need it I will just boot to it, it's so much easier doing this.
I always thought the same thing u did, until I just flashed the patched boot and updating is so much easier too.

JedixJarf said:
Why are people even flashing boot images? Just unlock bootloader, boot twrp from fastboot, flash twrp, flash magisk, all done.
Click to expand...
Click to collapse
Because I'm just following along with the tutorial xda put on YouTube and that's what they say to do

Question Has anyone successfully changed tmobile to internation yet?

using OnePlus 9 5g from tmobile and looking to convert to internation.anyone had any issues or tips to make sure I don't mess up?

So I come from the OnePlus 9 Pro forum, but the tips are identical because pretty much the same phone except for a few differences.
1. DO NOT FLASH BOOTLOADER
I can't stress this enough, flashing the bootloader will render the MSM tool that OnePlus provides for you USELESS! I figured this out the hard way!
2. Make a full device backup, if you're rooted already use Partitions backup and restore available on the Play Store
3. Keep OEM UNLOCKING ON THE WHOLE TIME! Don't turn it off until and unless you return to complete stock using a MSM tool! Also, keep your bootloader unlocked please.
4. Don't trust random "conversion" folders that flash everything at once without looking at the files, ESPECIALLY not without looking at the .bat file(s) such as a flashall.bat.

Sounds too risky. It's not so simple anymore .

Can I ask a clarifying question @razercortex ? You're saying to not flash the bootloader; does that mean I could simply take the boot.img, do the magisk thing to it, and at least have root? I don't wanna brick my T-Mobile variant here, but I really want to have root.

You don't need to do any of that to root. I'm running the tmo variant and have had root since I unlocked it.
Just grab the rooted boot.img and Fastboot BOOT! THE IMG, run magisk and choose direct install and restart then you got root. If you flash anything, you'll be in trouble most likely so just Fastboot boot boot.img

What if I don't want root, just international version

I am interested to switch from T-Mobile variant to international as well.

Josh McGrath said:
You don't need to do any of that to root. I'm running the tmo variant and have had root since I unlocked it.
Just grab the rooted boot.img and Fastboot BOOT! THE IMG, run magisk and choose direct install and restart then you got root. If you flash anything, you'll be in trouble most likely so just Fastboot boot boot.img
Click to expand...
Click to collapse
When you run the Safetynet check in Magisk, does it show "pass" ? Mine failed check.

inspron said:
When you run the Safetynet check in Magisk, does it show "pass" ? Mine failed check.
Click to expand...
Click to collapse
Do you have magiskhide enabled?

inspron said:
When you run the Safetynet check in Magisk, does it show "pass" ? Mine failed check.
Click to expand...
Click to collapse
Im showing to be passing. There was a magisk issue a week ago or so that cause it to fail but it was updated.
Playstore shows "Device is certified"

I really want international myself. This battery is complete garbage and tmo likes to drag their feet on an update the international got to fix the battery issue weeks ago

jfsat said:
Can I ask a clarifying question @razercortex ? You're saying to not flash the bootloader; does that mean I could simply take the boot.img, do the magisk thing to it, and at least have root? I don't wanna brick my T-Mobile variant here, but I really want to have root.
Click to expand...
Click to collapse
@jfsat If you just want root, patching the boot.img with magisk should be good enough. Just don't forget to keep OEM unlocking checked and keep the unlock code just in case. Also, don't relock until you have flashed stock boot.img.

Josh McGrath said:
You don't need to do any of that to root. I'm running the tmo variant and have had root since I unlocked it.
Just grab the rooted boot.img and Fastboot BOOT! THE IMG, run magisk and choose direct install and restart then you got root. If you flash anything, you'll be in trouble most likely so just Fastboot boot boot.img
Click to expand...
Click to collapse
It literally does not matter, but I would recommend flashing the boot.img instead because I don't know what the Direct Install method does to your phone's firmware. Flashing the boot.img works great, it only touches your boot partition and if you have the stock boot you can just flash it back and relock it, no problem. Direct Install could potentially change something else though it looks like it could be fine, but YMMV.

inspron said:
I am interested to switch from T-Mobile variant to international as well.
Click to expand...
Click to collapse
I know how to do it, you need to extract payload.bin from the EU OTA and flash all the partitions, find a tutorial online. Just make sure to make a full backup using Partitions backup and restore on the play store or manually dump partitions from your phone. You don't need userdata, it's too big and probably incompatible with the region change, just a side note that flashing partitions in the super partition (system, vendor, product, system_ext, odm, etc.) requires you to be in fastbootd, so use fastboot reboot fastboot to do so. Other than that, make sure there's an MSM tool available, you can check with OnePlus support.

General T-mobile Stock boot.img

I have seen a few people still in need of the stock boot.img 11.2.2.2. for t-mobile Oneplus 9 (LE2117) So I have attached it for those in need!

Here is the stock boot.img for 11.2.3.3 Oneplus 9 T-Mobile

Jg1234 said:
I have seen a few people still in need of the stock boot.img 11.2.2.2. for t-mobile Oneplus 9 (LE2117) So I have attached it for those in need!
Click to expand...
Click to collapse
Alright so I've been sitting on this file for a few days. Willl I be able to flash this to my LE2117 on 11.2.2.2 and relock bootloader and be back to stock? Or will my system still be corrupt if I relock? G just wait for a non pro msm tool?

hiryupd said:
Alright so I've been sitting on this file for a few days. Willl I be able to flash this to my LE2117 on 11.2.2.2 and relock bootloader and be back to stock? Or will my system still be corrupt if I relock? G just wait for a non pro msm tool?
Click to expand...
Click to collapse
I'm not sure how you went about rooting it originally, but if you have only flashed boot.img and nothing else. Then yes that is how I would go about doing it on my phone, if I was wanting to go back to locked bootloader. I don't see any issue with doing that after you install the stock boot.img.

Jg1234 said:
I'm not sure how you went about rooting it originally, but if you have only flashed boot.img and nothing else. Then yes that is how I would go about doing it on my phone, if I was wanting to go back to locked bootloader. I don't see any issue with doing that after you install the stock boot.img.
Click to expand...
Click to collapse
So I took magisk and downloaded the global OP and took boot.img from that magisk patched it and installed it then unlocked so I had the backup of THAT boot, not the Tmo one.

hiryupd said:
So I took magisk and downloaded the global OP and took boot.img from that magisk patched it and installed it then unlocked so I had the backup of THAT boot, not the Tmo one.
Click to expand...
Click to collapse
Yes That sucks but we all learn from are mistakes.. Fastboot Flash this stock boot.img and then either lock bootloader or if you want to have root? have magisk patch same stock boot.img and reinstall.
P.s. I also have been able to update over ota by just restoring stock boot.img in magisk.
Incase you wanted to keep rolling out with root. If you need help.i will try to make a step by step way I did it.

Jg1234 said:
Yes That sucks but we all learn from are mistakes.. Fastboot Flash this stock boot.img and then either lock bootloader or if you want to have root? have magisk patch same stock boot.img and reinstall.
P.s. I also have been able to update over ota by just restoring stock boot.img in magisk.
Incase you wanted to keep rolling out with root. If you need help.i will try to make a step by step way I did it.
Click to expand...
Click to collapse
Went ahead and reflashed that boot.img. Worked fine. Now I can relock with no other steps at this point correct?

Correct.

Thank you my friend. This is most helpful. I was reluctant to root without a good way to return to stock for updates.

Jg1234 said:
I have seen a few people still in need of the stock boot.img 11.2.2.2. for t-mobile Oneplus 9 (LE2117) So I have attached it for those in need!
Click to expand...
Click to collapse
safetynet api error ？ How to do？

Magisk 22.1 has a safety net error. Download this app and it will show it passes. Also widevine is L1 https://play.google.com/store/apps/details?id=org.freeandroidtools.safetynettest

Jg1234 said:
Magisk 22.1 has a safety net error. Download this app and it will show it passes. Also widevine is L1 https://play.google.com/store/apps/details?id=org.freeandroidtools.safetynettest
Click to expand...
Click to collapse
Thank you! But I broke the system. Now that the update downloads more than half of the time, an error will occur. Do you have a backup of the system firmware or all system images？

This is maybe a stupid question but how do I flash this stock.img using Magisk?

iSkyJIE said:
Thank you! But I broke the system. Now that the update downloads more than half of the time, an error will occur. Do you have a backup of the system firmware or all system images？
Click to expand...
Click to collapse
I don't.. I would try factory reset or at least clear cache a few times consecutively. Sounds like there is a cache causing a issue with update.

inspron said:
This is maybe a stupid question but how do I flash this stock.img using Magisk?
Click to expand...
Click to collapse
Well you would fastboot the stock boot.img. but if you have never tampered with your original? And wanted root? you would have magisk patch the stock boot.img and then fastboot your.img. if you search how to root with boot.img you will find how to do it with the files above

Jg1234 said:
I don't.. I would try factory reset or at least clear cache a few times consecutively. Sounds like there is a cache causing a issue with update.
Click to expand...
Click to collapse
I have tried to clear the cache and format, but the update is still halfway through the download and an error occurs

iSkyJIE said:
I have tried to clear the cache and format, but the update is still halfway through the download and an error occurs
Click to expand...
Click to collapse
I know it sounds stupid but check Google play updates. Since you reset the phone. Just a thought have heard it cause issue with ota . Sorry Bud!

Jg1234 said:
I know it sounds stupid but check Google play updates. Since you reset the phone. Just a thought have heard it cause issue with ota . Sorry Bud!
Click to expand...
Click to collapse
Thank you. Convert TMO to Global, EU, or other variant I flashed my phone to the international version based on this article, and then updated it to EU 11.2.3.3, everything worked normally

iSkyJIE said:
Thank you. Convert TMO to Global, EU, or other variant I flashed my phone to the international version based on this article, and then updated it to EU 11.2.3.3, everything worked normally
Click to expand...
Click to collapse
Would you be able to share which file did you use to convert to global? I just got my unlock bootloader token from oneplus right now.

infamousvincci said:
Would you be able to share which file did you use to convert to global? I just got my unlock bootloader token from oneplus right now.
Click to expand...
Click to collapse
In the top thread, you can download the global and European firmware Rom. you only need to replace your own modem file

Vortex V22 Standup Wireless Firmware Error

Hello!
I tried the search function but my search-fu isn't strong today. I got a Vortex V22 phone from Standup Wireless. I must have been half asleep, because when i flashed what I assumed was the correct boot.img, I got stuck in a boot loop.
On further investigation, I had flashed the boot for another device called Vortex. I am having incredible difficulty in finding the right boot image. The info I have from the side of the box is:
Vortex V22 4G LTE
Color: Graphite Blue
ROM 32GB
RAM 3GB
OS Android 11
FCC ID 2ADLJ-V22
I deeply appreciate any and all help. Thanks so much!

i was trying to find a phone case for the phone what model number is yours ?

If you're still searching I can try to make a rom dump, I have this phone as well brand new untouched or registered.
I'd just need a tutorial on the proper way to dump and extract the files so I can upload the boot.img
_
I've never used it cause I put the StandUp Wireless sim in my T-Mo InSeeGo 5G HotSpot and prefer to use my Galaxy S8 with Keyboard Cover Case and Unihertz Titan Pocket

Just dumping the firmware from mine, using SP Flash Tool. Used this guide: https://www.hovatek.com/forum/thread-12719.html
Will remove userdata & cache, but there is a LOT of gbs of system data. This phone is appearently Treble-enabled with VNDK ver 30, so yes, you can flash a GSI on there. Will provide a custom recovery necessary.
Edit: if you were wondering, this phone has a MT6761 with a eMMC flash.

PicelBoi said:
Just dumping the firmware from mine, using SP Flash Tool. Used this guide: https://www.hovatek.com/forum/thread-12719.html
Will remove userdata & cache, but there is a LOT of gbs of system data. This phone is appearently Treble-enabled with VNDK ver 30, so yes, you can flash a GSI on there. Will provide a custom recovery necessary.
Edit: if you were wondering, this phone has a MT6761 with a eMMC flash.
Click to expand...
Click to collapse
Hi PicelBoi,
I have the V22. I've unlocked the BL and trying to install a custom rom via ADB or Fastboot but have had no luck. I try to erase or flash and I get errors saying partitions don't exist. Can you please help out with a recovery file?
I tried the hovatek guide but didn't have any luck, but I tried it before the BL was unlocked. Would that be an issue with the sp flash tool? I was told it shouldn't matter.

In fastboot not fastboot d do
Fastboot flash unlocking
And it'll ask ya if u agree bs....
& Click yes.
Mtkclient unlocks bootloader as well

defcondoc said:
Hi PicelBoi,
I have the V22. I've unlocked the BL and trying to install a custom rom via ADB or Fastboot but have had no luck. I try to erase or flash and I get errors saying partitions don't exist. Can you please help out with a recovery file?
I tried the hovatek guide but didn't have any luck, but I tried it before the BL was unlocked. Would that be an issue with the sp flash tool? I was told it shouldn't matter.
Click to expand...
Click to collapse
Sorry for waiting so long! Yeah, I got the firmware! Also follow previous guys post! Do you want my boot.img? Make sure you disable Android Verified Boot too!

PicelBoi said:
Sorry for waiting so long! Yeah, I got the firmware! Also follow previous guys post! Do you want my boot.img? Make sure you disable Android Verified Boot too!
Click to expand...
Click to collapse
No worries. Yes! Do you have the entire rom? The boot.img would definitiely be great as well.

mee too

defcondoc said:
No worries. Yes! Do you have the entire rom? The boot.img would definitiely be great as well.
Click to expand...
Click to collapse
Yea, will post it later this day! Do you need anything else like my super partition?

PicelBoi said:
Yea, will post it later this day!
Click to expand...
Click to collapse
Also this is a GSI image that works with this device - https://github.com/phhusson/treble_experimentations/releases/tag/v313 - newer versions might not work unfortunately.

defcondoc said:
Hi PicelBoi,
I have the V22. I've unlocked the BL and trying to install a custom rom via ADB or Fastboot but have had no luck. I try to erase or flash and I get errors saying partitions don't exist. Can you please help out with a recovery file?
I tried the hovatek guide but didn't have any luck, but I tried it before the BL was unlocked. Would that be an issue with the sp flash tool? I was told it shouldn't matter.
Click to expand...
Click to collapse
You need to reboot to userland fastboot, which you could do by rebooting to normal fastboot then telling fastboot to reboot to fastboot by typing in fastboot reboot fastboot. You will see a new screen, and now you could flash a GSI to the phone.

PicelBoi said:
Also this is a GSI image that works with this device - https://github.com/phhusson/treble_experimentations/releases/tag/v313 - newer versions might not work unfortunately.
Click to expand...
Click to collapse
I was able to get a bunch of GSI's that work with it, including the phone you posted, but I was looking to get root and found a couple pre-rooted GSI's that work as well. Newer ones do work as well I has 13 rooted and working. However, I liked the Pixel ROMs the best and would prefer to install those instead and then root. So I need the firmware for that so I can patch a modified boot.img.

PicelBoi said:
You need to reboot to userland fastboot, which you could do by rebooting to normal fastboot then telling fastboot to reboot to fastboot by typing in fastboot reboot fastboot. You will see a new screen, and now you could flash a GSI to the phone.
Click to expand...
Click to collapse
Thank you. I understand and have a lot of experience with this. However, I still never understood why there is two Fastboot's.

I can't get it to boot in one I flash the super that I backed up that don't get it to boot maybe I could use a good super. What about vbmeta?

atsalchenberg said:
I can't get it to boot in one I flash the super that I backed up that don't get it to boot maybe I could use a good super. What about vbmeta?
Click to expand...
Click to collapse
Are you looking for a good GSI ROM?

As of right now I'm just trying to get it booted up with any room. I got it rooted and then something I ****ed up when I tried to flash a GSI. And I started messing with the boot a boot b vbMeta from system and blank. And I don't have the firmware an the super that I backed up won't boot when I flash it.

But yes I am indeed looking for a good running a12 rom

atsalchenberg said:
As of right now I'm just trying to get it booted up with any room. I got it rooted and then something I ****ed up when I tried to flash a GSI. And I started messing with the boot a boot b vbMeta from system and blank. And I don't have the firmware an the super that I backed up won't boot when I flash it.
Click to expand...
Click to collapse
I completely messed up one messing with partitions and it took many tries trying to get to was able to still get to the bootloader fastboot and then recovery to fastbootD. You should be able to get it booted into fastbootd and flash as it seems you can.
Try the one below. you should be able to find it with a google search. If you can't let me know and I will try to look and see where I downloaded it from as I cannot remember where I found it.
I've tried many GSI ROM's Some boot fully, some only boot to the boot screen and some won't boot at all.
I'm using 13 rooted LineageOS GSI version 20-20230324-UNOFFICIAL-arm64_bvS
It is vanilla. I can't remember if there is a GAPPS version or not. But you can load it all after with magisk. But its rooted.
I still would like if picelboi could share the stock rom, so we can have a boot.img. I would like to try other ROM's that are not PRE-Rooted.

atsalchenberg said:
But yes I am indeed looking for a good running a12 rom
Click to expand...
Click to collapse
I can't remember which A12 I had working but I was looking for root and the one A12 that was prerooted I had issues with so I went to A13.
This is an A13. LineageOS GSI version 20-20230324-UNOFFICIAL-arm64_bvS
There may be a newer version of it now.
Also, these phones seem have that internet connect issue with some GSI ROMS and this is one of them I think, they connect to wifi but they won't actually connect to internet, but there is a easy fix for it.