Database Info

T-Mobile 9.5.5 boot.img

Does anyone happen to have this? I used the 9.5.3 img for the TWRP with working decrypt, and it booted fine once, however now it keeps booting back to TWRP despite selecting "reboot system." I think someone mentioned they had it, but I can't find it for the life of me. Thanks so much!

No, don't think there are any full zips for T-Mo yet.

Bradl79 said:
No, don't think there are any full zips for T-Mo yet.
Click to expand...
Click to collapse
Thanks for the heads-up I actually got it to boot again by flashing SkyDragon kernel and Magisk!

sabrdawg said:
Thanks for the heads-up I actually got it to boot again by flashing SkyDragon kernel and Magisk!
Click to expand...
Click to collapse
How did this fix the boot image? How did your flash TWRP? The one with decryption or no?

photolarry said:
How did this fix the boot image? How did your flash TWRP? The one with decryption or no?
Click to expand...
Click to collapse
I flashed the TWRP with working decrypt. The only problem is, is that I just tried restoring a backup with it, and now I can't get out of fastboot mode. Downloading MSM Tool now :/

MSM Tool?
sabrdawg said:
I flashed the TWRP with working decrypt. The only problem is, is that I just tried restoring a backup with it, and now I can't get out of fastboot mode. Downloading MSM Tool now :/
Click to expand...
Click to collapse
Where is it? They said it is not out yet.

Here you go
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691

In case you still need it, I'm fairly certain this is the boot image for GM31CB 9.5.5. I extracted it from my own device when I was flashing the international firmware. I will be honest, it might have the Chinese TWRP patched in. I doubt it though since it I can't find any of the TWRP files in the decompiled image.
https://drive.google.com/open?id=1nla0OCUpFL01CnVM5vm0G4aQ1gZ6cupI

bmg1001 said:
In case you still need it, I'm fairly certain this is the boot image for GM31CB 9.5.5. I extracted it from my own device when I was flashing the international firmware. I will be honest, it might have the Chinese TWRP patched in. I doubt it though since it I can't find any of the TWRP files in the decompiled image.
https://drive.google.com/open?id=1nla0OCUpFL01CnVM5vm0G4aQ1gZ6cupI
Click to expand...
Click to collapse
Thank you!

bmg1001 said:
In case you still need it, I'm fairly certain this is the boot image for GM31CB 9.5.5. I extracted it from my own device when I was flashing the international firmware. I will be honest, it might have the Chinese TWRP patched in. I doubt it though since it I can't find any of the TWRP files in the decompiled image.
https://drive.google.com/open?id=1nla0OCUpFL01CnVM5vm0G4aQ1gZ6cupI
Click to expand...
Click to collapse
You had to root in order to extract boot IMG correct?

Nekromantik said:
You had to root in order to extract boot IMG correct?
Click to expand...
Click to collapse
No, I flashed TWRP to the opposite partition and extracted it there.

bmg1001 said:
No, I flashed TWRP to the opposite partition and extracted it there.
Click to expand...
Click to collapse
hmm
the instructions for installing twrp mentions having stock boot.img in order to install it
how did you flash to second slot without a stock boot.img?

Nekromantik said:
hmm
the instructions for installing twrp mentions having stock boot.img in order to install it
how did you flash to second slot without a stock boot.img?
Click to expand...
Click to collapse
I didn't use the guide. I flashed TWRP (the TWRP image that is provided in that same thread) to the opposite partition.

bmg1001 said:
I didn't use the guide. I flashed TWRP (the TWRP image that is provided in that same thread) to the opposite partition.
Click to expand...
Click to collapse
ah ok
not sure I wanna risk anything as no msmtool guaranteed for the 5g version.

"System update installation failed" while trying to install Q dp3, what did I miss?

"System update installation failed" while trying to install Q dp3, what did I miss?
I am currently on oxygenOS 9.0.8, both slots completely stock. I have unlocked the bootloader and enabled USB debugging.
I am trying to install Q dp3, but everytime I select Q dp3 zip file and press ok, update manager immediately says "System update installation failed" with no specific error code or any leads.
I have tried:
-Redownloading the Q dp3 file from here (https://oxygenos.oneplus.net/OnePlus6Oxygen_22_OTA_003_all_1907120020_wipe_ae2a3b38959345b1.zip)
-Rebooting and trying again
-Relock and unlock the bootloader
-factory reset within the settings
The strange thing is, I can normally install oxygenos 9.0.8 full update file. So I suspected problem of the dp3 file. But redownloading didn't solve the problem.
Is there something I have missed out? Some settings I have to do? Specific conditions?
Searching haven't helped me much(I searched everywhere, but I think nobody has my problem).
If someone can help me, I will be grateful. Thanks!

Since your bootloader is unlocked anyway, you can flash Android Q DP3 zip using TWRP. Flash it on both slots. Haven't tried blu_spark, but mauronofrio's TWRP works with Q. Don't forget to format data.

remewer said:
Since your bootloader is unlocked anyway, you can flash Android Q DP3 zip using TWRP. Flash it on both slots. Haven't tried blu_spark, but mauronofrio's TWRP works with Q. Don't forget to format data.
Click to expand...
Click to collapse
Thanks! Will try that!
Can I ask you one more question? What is the best and convenient way to go back to stock? I used nexus 4 and mi a1 before, and both devices just had to use
fastboot roms to go back to complete stock. Is it same with OP6? Or do I have to use MSM tool or other things?

ddaggebi said:
Thanks! Will try that!
Can I ask you one more question? What is the best and convenient way to go back to stock? I used nexus 4 and mi a1 before, and both devices just had to use
fastboot roms to go back to complete stock. Is it same with OP6? Or do I have to use MSM tool or other things?
Click to expand...
Click to collapse
I think it's down to your preference. I prefer the fastboot ROMs simply because I haven't tried MSM download tool yet. But yeah, both fastboot ROMs and MSM download tool are available for OP6.

remewer said:
I think it's down to your preference. I prefer the fastboot ROMs simply because I haven't tried MSM download tool yet. But yeah, both fastboot ROMs and MSM download tool are available for OP6.
Click to expand...
Click to collapse
Thanks you! Now I can flash away~

remewer said:
I think it's down to your preference. I prefer the fastboot ROMs simply because I haven't tried MSM download tool yet. But yeah, both fastboot ROMs and MSM download tool are available for OP6.
Click to expand...
Click to collapse
I successfully flashed Q dp3 thanks to you.
However, I can't boot TWRP with fastboot boot twrp.img method. Before updating to Q, it worked. Now, cmd line shows FAILED (remote: 'unknown command').
I have tested with newer versions of Fastboot, but the results were the same. Anybody knows how to solve this problem?

ddaggebi said:
I successfully flashed Q dp3 thanks to you.
However, I can't boot TWRP with fastboot boot twrp.img method. Before updating to Q, it worked. Now, cmd line shows FAILED (remote: 'unknown command').
I have tested with newer versions of Fastboot, but the results were the same. Anybody knows how to solve this problem?
Click to expand...
Click to collapse
Yep, it's a known issue with DP3 (or possibly earlier builds). Anyway, every time you flash a ROM, may it be stock or custom, you should always flash TWRP next. For now, you could try downgrading to Pie using fastboot ROMs.

remewer said:
Yep, it's a known issue with DP3 (or possibly earlier builds). Anyway, every time you flash a ROM, may it be stock or custom, you should always flash TWRP next. For now, you could try downgrading to Pie using fastboot ROMs.
Click to expand...
Click to collapse
Thank you so much. I don't know what I could've done without you. I'll try to downgrading. Still not accoustomed to how roms work in OP6. Guess I'll study more.
Again, thank you for kindly answering my noobish questions! It means a lot to me

ddaggebi said:
Thank you so much. I don't know what I could've done without you. I'll try to downgrading. Still not accoustomed to how roms work in OP6. Guess I'll study more.
Again, thank you for kindly answering my noobish questions! It means a lot to me
Click to expand...
Click to collapse
No problem. Read more about A/B partitions. It's actually just as easy to mod our phone once you know how A/B partitions work.

General T-mobile Stock boot.img

I have seen a few people still in need of the stock boot.img 11.2.2.2. for t-mobile Oneplus 9 (LE2117) So I have attached it for those in need!

Here is the stock boot.img for 11.2.3.3 Oneplus 9 T-Mobile

Jg1234 said:
I have seen a few people still in need of the stock boot.img 11.2.2.2. for t-mobile Oneplus 9 (LE2117) So I have attached it for those in need!
Click to expand...
Click to collapse
Alright so I've been sitting on this file for a few days. Willl I be able to flash this to my LE2117 on 11.2.2.2 and relock bootloader and be back to stock? Or will my system still be corrupt if I relock? G just wait for a non pro msm tool?

hiryupd said:
Alright so I've been sitting on this file for a few days. Willl I be able to flash this to my LE2117 on 11.2.2.2 and relock bootloader and be back to stock? Or will my system still be corrupt if I relock? G just wait for a non pro msm tool?
Click to expand...
Click to collapse
I'm not sure how you went about rooting it originally, but if you have only flashed boot.img and nothing else. Then yes that is how I would go about doing it on my phone, if I was wanting to go back to locked bootloader. I don't see any issue with doing that after you install the stock boot.img.

Jg1234 said:
I'm not sure how you went about rooting it originally, but if you have only flashed boot.img and nothing else. Then yes that is how I would go about doing it on my phone, if I was wanting to go back to locked bootloader. I don't see any issue with doing that after you install the stock boot.img.
Click to expand...
Click to collapse
So I took magisk and downloaded the global OP and took boot.img from that magisk patched it and installed it then unlocked so I had the backup of THAT boot, not the Tmo one.

hiryupd said:
So I took magisk and downloaded the global OP and took boot.img from that magisk patched it and installed it then unlocked so I had the backup of THAT boot, not the Tmo one.
Click to expand...
Click to collapse
Yes That sucks but we all learn from are mistakes.. Fastboot Flash this stock boot.img and then either lock bootloader or if you want to have root? have magisk patch same stock boot.img and reinstall.
P.s. I also have been able to update over ota by just restoring stock boot.img in magisk.
Incase you wanted to keep rolling out with root. If you need help.i will try to make a step by step way I did it.

Jg1234 said:
Yes That sucks but we all learn from are mistakes.. Fastboot Flash this stock boot.img and then either lock bootloader or if you want to have root? have magisk patch same stock boot.img and reinstall.
P.s. I also have been able to update over ota by just restoring stock boot.img in magisk.
Incase you wanted to keep rolling out with root. If you need help.i will try to make a step by step way I did it.
Click to expand...
Click to collapse
Went ahead and reflashed that boot.img. Worked fine. Now I can relock with no other steps at this point correct?

Correct.

Thank you my friend. This is most helpful. I was reluctant to root without a good way to return to stock for updates.

Jg1234 said:
I have seen a few people still in need of the stock boot.img 11.2.2.2. for t-mobile Oneplus 9 (LE2117) So I have attached it for those in need!
Click to expand...
Click to collapse
safetynet api error ？ How to do？

Magisk 22.1 has a safety net error. Download this app and it will show it passes. Also widevine is L1 https://play.google.com/store/apps/details?id=org.freeandroidtools.safetynettest

Jg1234 said:
Magisk 22.1 has a safety net error. Download this app and it will show it passes. Also widevine is L1 https://play.google.com/store/apps/details?id=org.freeandroidtools.safetynettest
Click to expand...
Click to collapse
Thank you! But I broke the system. Now that the update downloads more than half of the time, an error will occur. Do you have a backup of the system firmware or all system images？

This is maybe a stupid question but how do I flash this stock.img using Magisk?

iSkyJIE said:
Thank you! But I broke the system. Now that the update downloads more than half of the time, an error will occur. Do you have a backup of the system firmware or all system images？
Click to expand...
Click to collapse
I don't.. I would try factory reset or at least clear cache a few times consecutively. Sounds like there is a cache causing a issue with update.

inspron said:
This is maybe a stupid question but how do I flash this stock.img using Magisk?
Click to expand...
Click to collapse
Well you would fastboot the stock boot.img. but if you have never tampered with your original? And wanted root? you would have magisk patch the stock boot.img and then fastboot your.img. if you search how to root with boot.img you will find how to do it with the files above

Jg1234 said:
I don't.. I would try factory reset or at least clear cache a few times consecutively. Sounds like there is a cache causing a issue with update.
Click to expand...
Click to collapse
I have tried to clear the cache and format, but the update is still halfway through the download and an error occurs

iSkyJIE said:
I have tried to clear the cache and format, but the update is still halfway through the download and an error occurs
Click to expand...
Click to collapse
I know it sounds stupid but check Google play updates. Since you reset the phone. Just a thought have heard it cause issue with ota . Sorry Bud!

Jg1234 said:
I know it sounds stupid but check Google play updates. Since you reset the phone. Just a thought have heard it cause issue with ota . Sorry Bud!
Click to expand...
Click to collapse
Thank you. Convert TMO to Global, EU, or other variant I flashed my phone to the international version based on this article, and then updated it to EU 11.2.3.3, everything worked normally

iSkyJIE said:
Thank you. Convert TMO to Global, EU, or other variant I flashed my phone to the international version based on this article, and then updated it to EU 11.2.3.3, everything worked normally
Click to expand...
Click to collapse
Would you be able to share which file did you use to convert to global? I just got my unlock bootloader token from oneplus right now.

infamousvincci said:
Would you be able to share which file did you use to convert to global? I just got my unlock bootloader token from oneplus right now.
Click to expand...
Click to collapse
In the top thread, you can download the global and European firmware Rom. you only need to replace your own modem file

Vortex V22 Standup Wireless Firmware Error

Hello!
I tried the search function but my search-fu isn't strong today. I got a Vortex V22 phone from Standup Wireless. I must have been half asleep, because when i flashed what I assumed was the correct boot.img, I got stuck in a boot loop.
On further investigation, I had flashed the boot for another device called Vortex. I am having incredible difficulty in finding the right boot image. The info I have from the side of the box is:
Vortex V22 4G LTE
Color: Graphite Blue
ROM 32GB
RAM 3GB
OS Android 11
FCC ID 2ADLJ-V22
I deeply appreciate any and all help. Thanks so much!

i was trying to find a phone case for the phone what model number is yours ?

If you're still searching I can try to make a rom dump, I have this phone as well brand new untouched or registered.
I'd just need a tutorial on the proper way to dump and extract the files so I can upload the boot.img
_
I've never used it cause I put the StandUp Wireless sim in my T-Mo InSeeGo 5G HotSpot and prefer to use my Galaxy S8 with Keyboard Cover Case and Unihertz Titan Pocket

Just dumping the firmware from mine, using SP Flash Tool. Used this guide: https://www.hovatek.com/forum/thread-12719.html
Will remove userdata & cache, but there is a LOT of gbs of system data. This phone is appearently Treble-enabled with VNDK ver 30, so yes, you can flash a GSI on there. Will provide a custom recovery necessary.
Edit: if you were wondering, this phone has a MT6761 with a eMMC flash.

PicelBoi said:
Just dumping the firmware from mine, using SP Flash Tool. Used this guide: https://www.hovatek.com/forum/thread-12719.html
Will remove userdata & cache, but there is a LOT of gbs of system data. This phone is appearently Treble-enabled with VNDK ver 30, so yes, you can flash a GSI on there. Will provide a custom recovery necessary.
Edit: if you were wondering, this phone has a MT6761 with a eMMC flash.
Click to expand...
Click to collapse
Hi PicelBoi,
I have the V22. I've unlocked the BL and trying to install a custom rom via ADB or Fastboot but have had no luck. I try to erase or flash and I get errors saying partitions don't exist. Can you please help out with a recovery file?
I tried the hovatek guide but didn't have any luck, but I tried it before the BL was unlocked. Would that be an issue with the sp flash tool? I was told it shouldn't matter.

In fastboot not fastboot d do
Fastboot flash unlocking
And it'll ask ya if u agree bs....
& Click yes.
Mtkclient unlocks bootloader as well

defcondoc said:
Hi PicelBoi,
I have the V22. I've unlocked the BL and trying to install a custom rom via ADB or Fastboot but have had no luck. I try to erase or flash and I get errors saying partitions don't exist. Can you please help out with a recovery file?
I tried the hovatek guide but didn't have any luck, but I tried it before the BL was unlocked. Would that be an issue with the sp flash tool? I was told it shouldn't matter.
Click to expand...
Click to collapse
Sorry for waiting so long! Yeah, I got the firmware! Also follow previous guys post! Do you want my boot.img? Make sure you disable Android Verified Boot too!

PicelBoi said:
Sorry for waiting so long! Yeah, I got the firmware! Also follow previous guys post! Do you want my boot.img? Make sure you disable Android Verified Boot too!
Click to expand...
Click to collapse
No worries. Yes! Do you have the entire rom? The boot.img would definitiely be great as well.

mee too

defcondoc said:
No worries. Yes! Do you have the entire rom? The boot.img would definitiely be great as well.
Click to expand...
Click to collapse
Yea, will post it later this day! Do you need anything else like my super partition?

PicelBoi said:
Yea, will post it later this day!
Click to expand...
Click to collapse
Also this is a GSI image that works with this device - https://github.com/phhusson/treble_experimentations/releases/tag/v313 - newer versions might not work unfortunately.

defcondoc said:
Hi PicelBoi,
I have the V22. I've unlocked the BL and trying to install a custom rom via ADB or Fastboot but have had no luck. I try to erase or flash and I get errors saying partitions don't exist. Can you please help out with a recovery file?
I tried the hovatek guide but didn't have any luck, but I tried it before the BL was unlocked. Would that be an issue with the sp flash tool? I was told it shouldn't matter.
Click to expand...
Click to collapse
You need to reboot to userland fastboot, which you could do by rebooting to normal fastboot then telling fastboot to reboot to fastboot by typing in fastboot reboot fastboot. You will see a new screen, and now you could flash a GSI to the phone.

PicelBoi said:
Also this is a GSI image that works with this device - https://github.com/phhusson/treble_experimentations/releases/tag/v313 - newer versions might not work unfortunately.
Click to expand...
Click to collapse
I was able to get a bunch of GSI's that work with it, including the phone you posted, but I was looking to get root and found a couple pre-rooted GSI's that work as well. Newer ones do work as well I has 13 rooted and working. However, I liked the Pixel ROMs the best and would prefer to install those instead and then root. So I need the firmware for that so I can patch a modified boot.img.

PicelBoi said:
You need to reboot to userland fastboot, which you could do by rebooting to normal fastboot then telling fastboot to reboot to fastboot by typing in fastboot reboot fastboot. You will see a new screen, and now you could flash a GSI to the phone.
Click to expand...
Click to collapse
Thank you. I understand and have a lot of experience with this. However, I still never understood why there is two Fastboot's.

I can't get it to boot in one I flash the super that I backed up that don't get it to boot maybe I could use a good super. What about vbmeta?

atsalchenberg said:
I can't get it to boot in one I flash the super that I backed up that don't get it to boot maybe I could use a good super. What about vbmeta?
Click to expand...
Click to collapse
Are you looking for a good GSI ROM?

As of right now I'm just trying to get it booted up with any room. I got it rooted and then something I ****ed up when I tried to flash a GSI. And I started messing with the boot a boot b vbMeta from system and blank. And I don't have the firmware an the super that I backed up won't boot when I flash it.

But yes I am indeed looking for a good running a12 rom

atsalchenberg said:
As of right now I'm just trying to get it booted up with any room. I got it rooted and then something I ****ed up when I tried to flash a GSI. And I started messing with the boot a boot b vbMeta from system and blank. And I don't have the firmware an the super that I backed up won't boot when I flash it.
Click to expand...
Click to collapse
I completely messed up one messing with partitions and it took many tries trying to get to was able to still get to the bootloader fastboot and then recovery to fastbootD. You should be able to get it booted into fastbootd and flash as it seems you can.
Try the one below. you should be able to find it with a google search. If you can't let me know and I will try to look and see where I downloaded it from as I cannot remember where I found it.
I've tried many GSI ROM's Some boot fully, some only boot to the boot screen and some won't boot at all.
I'm using 13 rooted LineageOS GSI version 20-20230324-UNOFFICIAL-arm64_bvS
It is vanilla. I can't remember if there is a GAPPS version or not. But you can load it all after with magisk. But its rooted.
I still would like if picelboi could share the stock rom, so we can have a boot.img. I would like to try other ROM's that are not PRE-Rooted.

atsalchenberg said:
But yes I am indeed looking for a good running a12 rom
Click to expand...
Click to collapse
I can't remember which A12 I had working but I was looking for root and the one A12 that was prerooted I had issues with so I went to A13.
This is an A13. LineageOS GSI version 20-20230324-UNOFFICIAL-arm64_bvS
There may be a newer version of it now.
Also, these phones seem have that internet connect issue with some GSI ROMS and this is one of them I think, they connect to wifi but they won't actually connect to internet, but there is a easy fix for it.

Extract persist.img from this file?

Hi, can I extract persist.img from this?
https://www.xda-developers.com/oneplus-7-7t-may-2022-security-patches/
Thanks for helping out!

espositodnl86 said:
Hi, can I extract persist.img from this?
https://www.xda-developers.com/oneplus-7-7t-may-2022-security-patches/
Thanks for helping out!
Click to expand...
Click to collapse
As far as I know, persist.img is unique to your phone, so if it's messed up, you have to send it in. You can Make it back up of it, but if it's already messed up it's pointless now

It's not messed up but proximity and auto-brightness sensors are not working with ANY custom ROM but they work flawlessly under OOS (GM1913).
Any idea?
Thanks for helping!

espositodnl86 said:
It's not messed up but proximity and auto-brightness sensors are not working with ANY custom ROM but they work flawlessly under OOS (GM1913).
Any idea?
Thanks for helping!
Click to expand...
Click to collapse
OOS11 or OOS12? It only works on OOS though? Have you tried going back to OOS and seeing if it still works?

parag0n1986 said:
OOS11 or OOS12? It only works on OOS though? Have you tried going back to OOS and seeing if it still works?
Click to expand...
Click to collapse
11. Yes, if I restore my phone using MSM tool everything works again.

espositodnl86 said:
11. Yes, if I restore my phone using MSM tool everything works again.
Click to expand...
Click to collapse
Try restoring with MSM, then unlock bootloader and root, then flash the newest oos11 update again so both slots have it. MSM only fixes slot a. After that reboot, make sure everything works still. If so, backup persist.img with adb, termux, or the partitions backup app from google play. Flash a custom ROM and boot and see if it works. If not flash the persists.image that you backed up and check again. dd if=/dev/block/by-bame/persist of=/sdcard/persist.img that command works with root in termux and adb shell. Just copy the image to your computer or USB stick

Can I ask why you are suggesting to backup and restore persist as - from what I know - installing a custom rom won't touch that partition?

espositodnl86 said:
Can I ask why you are suggesting to backup and restore persist as - from what I know - installing a custom rom won't touch that partition?
Click to expand...
Click to collapse
Because it sounds like something is messing with it possibly. That way if it is getting messed up you can flash the working persist you backed up to see if that is what is happening