Hello!
I tried the search function but my search-fu isn't strong today. I got a Vortex V22 phone from Standup Wireless. I must have been half asleep, because when i flashed what I assumed was the correct boot.img, I got stuck in a boot loop.
On further investigation, I had flashed the boot for another device called Vortex. I am having incredible difficulty in finding the right boot image. The info I have from the side of the box is:
Vortex V22 4G LTE
Color: Graphite Blue
ROM 32GB
RAM 3GB
OS Android 11
FCC ID 2ADLJ-V22
I deeply appreciate any and all help. Thanks so much!
i was trying to find a phone case for the phone what model number is yours ?
If you're still searching I can try to make a rom dump, I have this phone as well brand new untouched or registered.
I'd just need a tutorial on the proper way to dump and extract the files so I can upload the boot.img
_
I've never used it cause I put the StandUp Wireless sim in my T-Mo InSeeGo 5G HotSpot and prefer to use my Galaxy S8 with Keyboard Cover Case and Unihertz Titan Pocket
Just dumping the firmware from mine, using SP Flash Tool. Used this guide: https://www.hovatek.com/forum/thread-12719.html
Will remove userdata & cache, but there is a LOT of gbs of system data. This phone is appearently Treble-enabled with VNDK ver 30, so yes, you can flash a GSI on there. Will provide a custom recovery necessary.
Edit: if you were wondering, this phone has a MT6761 with a eMMC flash.
PicelBoi said:
Just dumping the firmware from mine, using SP Flash Tool. Used this guide: https://www.hovatek.com/forum/thread-12719.html
Will remove userdata & cache, but there is a LOT of gbs of system data. This phone is appearently Treble-enabled with VNDK ver 30, so yes, you can flash a GSI on there. Will provide a custom recovery necessary.
Edit: if you were wondering, this phone has a MT6761 with a eMMC flash.
Click to expand...
Click to collapse
Hi PicelBoi,
I have the V22. I've unlocked the BL and trying to install a custom rom via ADB or Fastboot but have had no luck. I try to erase or flash and I get errors saying partitions don't exist. Can you please help out with a recovery file?
I tried the hovatek guide but didn't have any luck, but I tried it before the BL was unlocked. Would that be an issue with the sp flash tool? I was told it shouldn't matter.
In fastboot not fastboot d do
Fastboot flash unlocking
And it'll ask ya if u agree bs....
& Click yes.
Mtkclient unlocks bootloader as well
defcondoc said:
Hi PicelBoi,
I have the V22. I've unlocked the BL and trying to install a custom rom via ADB or Fastboot but have had no luck. I try to erase or flash and I get errors saying partitions don't exist. Can you please help out with a recovery file?
I tried the hovatek guide but didn't have any luck, but I tried it before the BL was unlocked. Would that be an issue with the sp flash tool? I was told it shouldn't matter.
Click to expand...
Click to collapse
Sorry for waiting so long! Yeah, I got the firmware! Also follow previous guys post! Do you want my boot.img? Make sure you disable Android Verified Boot too!
PicelBoi said:
Sorry for waiting so long! Yeah, I got the firmware! Also follow previous guys post! Do you want my boot.img? Make sure you disable Android Verified Boot too!
Click to expand...
Click to collapse
No worries. Yes! Do you have the entire rom? The boot.img would definitiely be great as well.
mee too
defcondoc said:
No worries. Yes! Do you have the entire rom? The boot.img would definitiely be great as well.
Click to expand...
Click to collapse
Yea, will post it later this day! Do you need anything else like my super partition?
PicelBoi said:
Yea, will post it later this day!
Click to expand...
Click to collapse
Also this is a GSI image that works with this device - https://github.com/phhusson/treble_experimentations/releases/tag/v313 - newer versions might not work unfortunately.
defcondoc said:
Hi PicelBoi,
I have the V22. I've unlocked the BL and trying to install a custom rom via ADB or Fastboot but have had no luck. I try to erase or flash and I get errors saying partitions don't exist. Can you please help out with a recovery file?
I tried the hovatek guide but didn't have any luck, but I tried it before the BL was unlocked. Would that be an issue with the sp flash tool? I was told it shouldn't matter.
Click to expand...
Click to collapse
You need to reboot to userland fastboot, which you could do by rebooting to normal fastboot then telling fastboot to reboot to fastboot by typing in fastboot reboot fastboot. You will see a new screen, and now you could flash a GSI to the phone.
PicelBoi said:
Also this is a GSI image that works with this device - https://github.com/phhusson/treble_experimentations/releases/tag/v313 - newer versions might not work unfortunately.
Click to expand...
Click to collapse
I was able to get a bunch of GSI's that work with it, including the phone you posted, but I was looking to get root and found a couple pre-rooted GSI's that work as well. Newer ones do work as well I has 13 rooted and working. However, I liked the Pixel ROMs the best and would prefer to install those instead and then root. So I need the firmware for that so I can patch a modified boot.img.
PicelBoi said:
You need to reboot to userland fastboot, which you could do by rebooting to normal fastboot then telling fastboot to reboot to fastboot by typing in fastboot reboot fastboot. You will see a new screen, and now you could flash a GSI to the phone.
Click to expand...
Click to collapse
Thank you. I understand and have a lot of experience with this. However, I still never understood why there is two Fastboot's.
I can't get it to boot in one I flash the super that I backed up that don't get it to boot maybe I could use a good super. What about vbmeta?
atsalchenberg said:
I can't get it to boot in one I flash the super that I backed up that don't get it to boot maybe I could use a good super. What about vbmeta?
Click to expand...
Click to collapse
Are you looking for a good GSI ROM?
As of right now I'm just trying to get it booted up with any room. I got it rooted and then something I ****ed up when I tried to flash a GSI. And I started messing with the boot a boot b vbMeta from system and blank. And I don't have the firmware an the super that I backed up won't boot when I flash it.
But yes I am indeed looking for a good running a12 rom
atsalchenberg said:
As of right now I'm just trying to get it booted up with any room. I got it rooted and then something I ****ed up when I tried to flash a GSI. And I started messing with the boot a boot b vbMeta from system and blank. And I don't have the firmware an the super that I backed up won't boot when I flash it.
Click to expand...
Click to collapse
I completely messed up one messing with partitions and it took many tries trying to get to was able to still get to the bootloader fastboot and then recovery to fastbootD. You should be able to get it booted into fastbootd and flash as it seems you can.
Try the one below. you should be able to find it with a google search. If you can't let me know and I will try to look and see where I downloaded it from as I cannot remember where I found it.
I've tried many GSI ROM's Some boot fully, some only boot to the boot screen and some won't boot at all.
I'm using 13 rooted LineageOS GSI version 20-20230324-UNOFFICIAL-arm64_bvS
It is vanilla. I can't remember if there is a GAPPS version or not. But you can load it all after with magisk. But its rooted.
I still would like if picelboi could share the stock rom, so we can have a boot.img. I would like to try other ROM's that are not PRE-Rooted.
atsalchenberg said:
But yes I am indeed looking for a good running a12 rom
Click to expand...
Click to collapse
I can't remember which A12 I had working but I was looking for root and the one A12 that was prerooted I had issues with so I went to A13.
This is an A13. LineageOS GSI version 20-20230324-UNOFFICIAL-arm64_bvS
There may be a newer version of it now.
Also, these phones seem have that internet connect issue with some GSI ROMS and this is one of them I think, they connect to wifi but they won't actually connect to internet, but there is a easy fix for it.
Related
Hi Guys,
Note : By doing this, you know that you're gonna do a modification to your phone, and im not in any way, responsible for what happen after. Escape Route for if something wrong happen is provided, but YOU DO THIS ON YOUR OWN RISK
since this phone is fairly new, at this moment a clear rooting method haven't established yet. This is what this thread for.
Based on information gathered from P20 Lite Forum (the rooting guide for that device even already up - here), it seems the old trick of rooting (from Mate 10 Pro) using Patched Boot Method is working fine. And Magisk is working
Basically this method need few pre-requisites :
1. Unlocked Bootloader (by getting the code here ) - and if you not sure how to do it, go here for the guide
2. Stock Boot (or RAMDISK to be precise for this phone) - I managed to extract it from 8.1.0.106 ROM version for CLT-L29 (download here)
3. Magisk Manager 5.5.4 (from Magisk Thread) to patch the .img above, or
4. Patched RAMDISK image (i patched it) from here
5. and of course computer with ADB & Fastboot installed (make sure you have latest SDK to prevent something not working)
Now, to Root it, all you need to do is,
1. Boot into bootloader
2. Type
Code:
fastboot flash ramdisk patched_boot.img
(patched_boot.img is the file you download from prerequisites number 4, placed it in the same directory with your adb & fastboot - i assume you know that already)
3. Reboot
4. You now should have root access, download Magisk Manager to manage modules and superuser
(you might need to flash this module if you failed to pass safetynet)
In case something go wrong, flash back the stock RAMDISK from pre-requistes number 2 above using same method as what u did to flash the patched one.
That way worked. Thanks.
Edit:
Just as a hint. To get magisk work as it should..
After boot into the system and installed Magisk Manager, install Magisk from there again, so you dont get any /data/magisk problems.
SafteyNet passed then.
Fingers crossed twrp is possible soon
Works on CLT-L09
I have a German single Sim from Vodafone tested the root yesterday and works very well
Would this method work on CLT-L09 model? Thanks
danifilth4king said:
Would this method work on CLT-L09 model? Thanks
Click to expand...
Click to collapse
The post before you just confirmed yourbquestion, LoL
Yes it does
This is awesome, thanks for sharing! I thought I could live without root but after only half a day, I've decided I can't!
Before I do this, I was wondering where you managed to get the stock rom (quote below)?
otonieru said:
2. Stock Boot (or RAMDISK to be precise for this phone) - I managed to extract it from 8.1.0.106 ROM version for CLT-L29 (download here)
Click to expand...
Click to collapse
fl4r3 said:
This is awesome, thanks for sharing! I thought I could live without root but after only half a day, I've decided I can't!
Before I do this, I was wondering where you managed to get the stock rom (quote below)?
Click to expand...
Click to collapse
It's from www.allrom.ir (its in persian) and there's another site, rusian one if am not mistaken, but i forget the exact address
Great, thanks for that! I managed to find it on allrom.ir
Hey guys, I need some help please! I unlocked bootloader through Huawei website which went fine and then when I flashed the patched boot.img through fastboot and tried to reboot my phone has told me there was a critical error while booting. It won't boot to system and just loops a few times and then boots to Huawei eRecovery. This is my first Huawei device and I'm clueless as to how to recover
Any ideas would be much appreciated! Thanks
**EDIT*** false alarm! I managed to boot to fastboot and restore the ramdisk from the first post
danifilth4king said:
Hey guys, I need some help please! I unlocked bootloader through Huawei website which went fine and then when I flashed the patched boot.img through fastboot and tried to reboot my phone has told me there was a critical error while booting. It won't boot to system and just loops a few times and then boots to Huawei eRecovery. This is my first Huawei device and I'm clueless as to how to recover
Any ideas would be much appreciated! Thanks
**EDIT*** false alarm! I managed to boot to fastboot and restore the ramdisk from the first post
Click to expand...
Click to collapse
What is your phone model ? CLT-L29 or L09 ? And what is your ROM version ?
otonieru said:
What is your phone model ? CLT-L29 or L09 ? And what is your ROM version ?
Click to expand...
Click to collapse
It's CLT-L09, build number 8.1.0.103(C782)
It's and EE UK handset. Any ideas why it wouldn't have worked? Thanks
danifilth4king said:
It's CLT-L09, build number 8.1.0.103(C782)
It's and EE UK handset. Any ideas why it wouldn't have worked? Thanks
Click to expand...
Click to collapse
The ramdisk.img was taken from .106 ROM, so its actually newer than what installed on your phone. That might become issue,
But, do you managed to revive the phone using the stock ramdisk from first post ?
otonieru said:
The ramdisk.img was taken from .106 ROM, so its actually newer than what installed on your phone. That might become issue,
But, do you managed to revive the phone using the stock ramdisk from first post ?
Click to expand...
Click to collapse
Yes thank you, the stock ramdisk from the first post allowed my phone to boot normally again. Do you think if I use magisk manager app to patch the stock ramdisk it will work for me? Or is that the same as what you did to make the patched boot.img anyway?
danifilth4king said:
Yes thank you, the stock ramdisk from the first post allowed my phone to boot normally again. Do you think if I use magisk manager app to patch the stock ramdisk it will work for me? Or is that the same as what you did to make the patched boot.img anyway?
Click to expand...
Click to collapse
If you have the 103 rom, and able to extract the ramdisk yourself, you can try patch it yourself.
Have you tried to flash the patch ramdisk one more time ? In case it just a bad flash.
Because if you manage to boot using stock one. It means your system has no problem using .106 boot image and the patched one should work as well
otonieru said:
If you have the 103 rom, and able to extract the ramdisk yourself, you can try patch it yourself.
Have you tried to flash the patch ramdisk one more time ? In case it just a bad flash.
Because if you manage to boot using stock one. It means your system has no problem using .106 boot image and the patched one should work as well
Click to expand...
Click to collapse
Ok I will try again and report back. How do you boot into fastboot from device off state by the way? I had difficulty doing it earlier. Thanks again!
danifilth4king said:
Ok I will try again and report back. How do you boot into fastboot from device off state by the way? I had difficulty doing it earlier. Thanks again!
Click to expand...
Click to collapse
Its better to do it from ON state, and use adb reboot bootloader command
otonieru said:
Its better to do it from ON state, and use adb reboot bootloader command
Click to expand...
Click to collapse
I mean if the patched boot.img still doesn't work again and the device won't boot to system? I did it before when I flashed back to stock ramdisk, but I don't know how I entered fastboot exactly lol
danifilth4king said:
I mean if the patched boot.img still doesn't work again and the device won't boot to system? I did it before when I flashed back to stock ramdisk, but I don't know how I entered fastboot exactly lol
Click to expand...
Click to collapse
Put the device off and hold power button and volume down. You should come directly into the rescue mode.
danifilth4king said:
I mean if the patched boot.img still doesn't work again and the device won't boot to system? I did it before when I flashed back to stock ramdisk, but I don't know how I entered fastboot exactly lol
Click to expand...
Click to collapse
Ah, sorry, i got it wrong. Yes, its power n volume down.
Hi guys
I was trying some of custom rom on my OP6 and I wanted to go back to Oxygen OS. So i did a clean installation with system wipe and i flashed the last full OTA update. But since i can't boot to system anymore, TWRP always displays that there is no OS installed despite the fact that I've tried several rom . Is this the first time it's done this to me how can I fix it?
raptax said:
Hi guys
I was trying some of custom rom on my OP6 and I wanted to go back to Oxygen OS. So i did a clean installation with system wipe and i flashed the last full OTA update. But since i can't boot to system anymore, TWRP always displays that there is no OS installed despite the fact that I've tried several rom . Is this the first time it's done this to me how can I fix it?
Click to expand...
Click to collapse
The best suggestion I can give you is to flash stock oos with TWRP, reboot to stock recovery, without flashing anything else, wipe data from stock recovery and startup system.. if it is working you can flash back TWRP and magisk if you need it
Just be careful because at your point is easy to lose all of your stored data
Hitman478™ said:
The best suggestion I can give you is to flash stock oos with TWRP, reboot to stock recovery, without flashing anything else, wipe data from stock recovery and startup system.. if it is working you can flash back TWRP and magisk if you need it
Just be careful because at your point is easy to lose all of your stored data
Click to expand...
Click to collapse
I tried your solution ..... and it worked thx man
I don't know why there was a problem with TWRP but the important thing is that my phone is alive again
raptax said:
I tried your solution ..... and it worked thx man
I don't know why there was a problem with TWRP but the important thing is that my phone is alive again
Click to expand...
Click to collapse
Exactly! I'm glad to had help you sometimes if something is done wrong TWRP is dangerous
raptax said:
I tried your solution ..... and it worked thx man
I don't know why there was a problem with TWRP but the important thing is that my phone is alive again
Click to expand...
Click to collapse
If you wipe system, then flash oos ROM, TWRP will think there is no os. You can just ignore and boot.
Wiping system then flashing any time will make twrp display "no os installed" it does this because it hasn't created files for twrp to check if you have a ton installed. Flashing twrp then rebooting to twrp fixes it.
Reboot to stock recovery?
Hitman478™ said:
The best suggestion I can give you is to flash stock oos with TWRP, reboot to stock recovery, without flashing anything else, wipe data from stock recovery and startup system.. if it is working you can flash back TWRP and magisk if you need it
Just be careful because at your point is easy to lose all of your stored data
Click to expand...
Click to collapse
Hi, need a little bit of support, since I'm new to this as well. I was in a working OOS open beta 25/28, but then I think I flashed the wrong zip (OOS 9.0.9?), and I was not able to boot to system. It kept going to "bootloader unlocked" screen and custom recovery. Currently in TWRP blu_spark 3.3.1-x v. 9.109, and it's showing me no OS installed when I attempt to reboot. I haven't rebooted to system yet.
All the folders in my /sdcard is gibberish... if I try to push a file to it, it says "Required key not available." I did remove all security/passwords from my phone before doing any updates/backups.
I completed a wipe cache/dalvik/system via TWRP, and flashed the OOS OTA stable Android 10 zip downloaded directly from OnePlus Support. Considering this situation, do you still think it's safe for me to reboot to system? Then how do I get to stock recovery from there--is that by holding down the buttons?
5xonlineage said:
Hi, need a little bit of support, since I'm new to this as well. I was in a working OOS open beta 25/28, but then I think I flashed the wrong zip (OOS 9.0.9?), and I was not able to boot to system. It kept going to "bootloader unlocked" screen and custom recovery. Currently in TWRP blu_spark 3.3.1-x v. 9.109, and it's showing me no OS installed when I attempt to reboot. I haven't rebooted to system yet.
All the folders in my /sdcard is gibberish... if I try to push a file to it, it says "Required key not available." I did remove all security/passwords from my phone before doing any updates/backups.
I completed a wipe cache/dalvik/system via TWRP, and flashed the OOS OTA stable Android 10 zip downloaded directly from OnePlus Support. Considering this situation, do you still think it's safe for me to reboot to system? Then how do I get to stock recovery from there--is that by holding down the buttons?
Click to expand...
Click to collapse
No, your internal storage Is like trash cause the last rom you flashed has older security patch than oos10. Your device Is now encrypted and wont boot to system. I Guess you have to erase all via MSN tool or fastboot signed rom. Even if you wiped what mentioned above, your problem still be the data.
Fastboot method?
°Washy said:
No, your internal storage Is like trash cause the last rom you flashed has older security patch than oos10. Your device Is now encrypted and wont boot to system. I Guess you have to erase all via MSN tool or fastboot signed rom. Even if you wiped what mentioned above, your problem still be the data.
Click to expand...
Click to collapse
Thank you for replying. I'm relieved that you know of a couple methods to try.
Is using "Format Data" in TWRP an option for dealing with the encryption??
For the MSN tool, can I use this one? Tried looking around, but it's unclear. "[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" https://forum.xda-developers.com/on...wnloadtool-v4-0-international-t3798892/page10
I would be more comfortable with using fastboot, but am I at any risk of having lost fastboot, or can I just turn off my device from TWRP right now and hold down the buttons to get there? Afraid to move out of TWRP right now, in case I can't get back. I do have twrp-3.3.1-18-enchilada-Q-mauronofrio.img that I can run from fastboot if needed.
By "signed rom," do you mean I can simply flash one of the zips here from fastboot? "[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates" https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Thanks again.
5xonlineage said:
Thank you for replying. I'm relieved that you know of a couple methods to try.
Is using "Format Data" in TWRP an option for dealing with the encryption??
For the MSN tool, can I use this one? Tried looking around, but it's unclear. "[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" https://forum.xda-developers.com/on...wnloadtool-v4-0-international-t3798892/page10
I would be more comfortable with using fastboot, but am I at any risk of having lost fastboot, or can I just turn off my device from TWRP right now and hold down the buttons to get there? Afraid to move out of TWRP right now, in case I can't get back. I do have twrp-3.3.1-18-enchilada-Q-mauronofrio.img that I can run from fastboot if needed.
By "signed rom," do you mean I can simply flash one of the zips here from fastboot? "[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates" https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Thanks again.
Click to expand...
Click to collapse
I hardbricked my device about 10 times and i was able to recovery It even from a blank screen. Btw format data Will erase all your data but also the internal storage. About fastboot dont be afraid, go under twrp reboot section and reboot to bootloader. Then go under xda op6 guide section and search for mirrors for fastboot rom guide by Mauronofrio. He pushed my ass out the **** a lot of time.
P.s. Sorry but I dunno how to paste a link via xda app. Yes, ik! It's a vert newbie thing.
5xonlineage said:
Thank you for replying. I'm relieved that you know of a couple methods to try.
Is using "Format Data" in TWRP an option for dealing with the encryption??
For the MSN tool, can I use this one? Tried looking around, but it's unclear. "[TOOL] MsmDownloadTool V4.0 International (Oxygen OS 5.1.5)" https://forum.xda-developers.com/on...wnloadtool-v4-0-international-t3798892/page10
I would be more comfortable with using fastboot, but am I at any risk of having lost fastboot, or can I just turn off my device from TWRP right now and hold down the buttons to get there? Afraid to move out of TWRP right now, in case I can't get back. I do have twrp-3.3.1-18-enchilada-Q-mauronofrio.img that I can run from fastboot if needed.
By "signed rom," do you mean I can simply flash one of the zips here from fastboot? "[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates" https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-mirrors-official-oxygen-os-t3792244
Thanks again.
Click to expand...
Click to collapse
Do you solve, man?
Fastboot ROM
°Washy said:
I hardbricked my device about 10 times and i was able to recovery It even from a blank screen. Btw format data Will erase all your data but also the internal storage. About fastboot dont be afraid, go under twrp reboot section and reboot to bootloader. Then go under xda op6 guide section and search for mirrors for fastboot rom guide by Mauronofrio. He pushed my ass out the **** a lot of time.
P.s. Sorry but I dunno how to paste a link via xda app. Yes, ik! It's a vert newbie thing.
Click to expand...
Click to collapse
That's awesome, I'm starting to grasp how much of a genius Mauronofrio is, after so many people referencing his work.
In his guide, he says, "These ROMs can't be used to update or downgrade your phone but just to restore your phone, so don't use them to come back to oreo or to update from oreo to pie." This may be a dumb question, but how do I know which zip/OOS version to flash, when I don't have a functioning OS on my phone?
5xonlineage said:
That's awesome, I'm starting to grasp how much of a genius Mauronofrio is, after so many people referencing his work.
In his guide, he says, "These ROMs can't be used to update or downgrade your phone but just to restore your phone, so don't use them to come back to oreo or to update from oreo to pie." This may be a dumb question, but how do I know which zip/OOS version to flash, when I don't have a functioning OS on my phone?
Click to expand...
Click to collapse
I talked with Mauronofrio in pm and he said me that you could solve your issue simply flash the ROM you want and format data after flash that one. Remember that your internal will be wiped but it would happen in any scenario we talked.
Magisk, boot img?
°Washy said:
I talked with Mauronofrio in pm and he said me that you could solve your issue simply flash the ROM you want and format data after flash that one. Remember that your internal will be wiped but it would happen in any scenario we talked.
Click to expand...
Click to collapse
That worked! And starstruck that you were able to check that with him. I flashed Mauronofrio's fastboot ROM for 10.3.2 and it rebooted (WOW). I clicked through the Google setup pages and checked that my data and wifi worked.
I then went back into fastboot, booted M's twrp img, fomatted data, and then installed twrp-3.3.1-x_blu_spark_v9.109_op6.zip, rebooted into recovery.
Then I think I made a mistake, because I installed Magisk-v20.4.zip. It succeeded, but now I can't boot into system anymore. Is it too late to flash the 10.3.2 boot.img?
5xonlineage said:
That worked! And starstruck that you were able to check that with him. I flashed Mauronofrio's fastboot ROM for 10.3.2 and it rebooted (WOW). I clicked through the Google setup pages and checked that my data and wifi worked.
I then went back into fastboot, booted M's twrp img, fomatted data, and then installed twrp-3.3.1-x_blu_spark_v9.109_op6.zip, rebooted into recovery.
Then I think I made a mistake, because I installed Magisk-v20.4.zip. It succeeded, but now I can't boot into system anymore. Is it too late to flash the 10.3.2 boot.img?
Click to expand...
Click to collapse
No. Just flash stock boot image if magisk broke something.
Rooted
°Washy said:
No. Just flash stock boot image if magisk broke something.
Click to expand...
Click to collapse
I ended up following the guide to Magisk Root without TWRP for OnePlus 6 Oxygen OS https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853 since it was referenced by Mauronofrio's post for having issues getting his TWRP to work with latest Magisk.
Someone posted a patched boot.img for 10.3.2, so now I'm rooted without TWRP. Priorities. Now all I need is for special characters and emojis to work Will keep an eye on other threads.
I'm learning a lot, thanks so much for all your help. You pointed me in the right direction when I was not sure what the hell to do!
5xonlineage said:
I ended up following the guide to Magisk Root without TWRP for OnePlus 6 Oxygen OS https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853 since it was referenced by Mauronofrio's post for having issues getting his TWRP to work with latest Magisk.
Someone posted a patched boot.img for 10.3.2, so now I'm rooted without TWRP. Priorities. Now all I need is for special characters and emojis to work Will keep an eye on other threads.
I'm learning a lot, thanks so much for all your help. You pointed me in the right direction when I was not sure what the hell to do!
Click to expand...
Click to collapse
I followed that thread for the first A10 release cause there wasn't a worked twrp yet. You are welcome man, when I feel myself usefull I always try to help.
So I am not an entire noob when it comes to these things, I've flashed ROMs on phones for 8 years now, but this Moto G7 Power screwed me up good.
I tried installing CrDroid from this post. I didn't even notice the A/B part at first, I went through all the usual steps, I booted TWRP, then flashed it, rebooted into the installed TWRP, flashed CrDroid, GApps and Magisk and rebooted, hoping to start Android up. At that part it all screwed up. The phone didn't boot AT ALL, and after a while I found that blankflash zip file and managed to get into the bootloader again. The only thing I can do now is boot into TWRP, not flash, and when I boot, the touchscreen does not work.
So, where do I go from here? I now only have an unlocked bootloader to play with. What are the exact steps to flash the firmware? Why do I need to flash firmware to slot A anyway? Isn't or wasn't there firmware out of the box on the device? The guides for this phone are vague and people write really short and rambling sentences in the steps and mention certain files out of the blue without explanation or download link.
1 - Which firmware file do I need? I have an XT1955-4 bought in a Dutch shop called Belsimpel with no sim. I assume it's an international variant. Here is a download list of all the firmware variants, but how do I know which one to pick? Will it wipe things like IMEI data? The box says the type is M3C94, and it seems to be this international variant.
2 - In the bootloader, what commands do I need to put into adb when I want to flash the firmware to partition A?
3 - When I boot into TWRP, my touchscreen does not work, so how can I even use it?
4 - The 'guide' in the CrDroid thread suddenly mentions copypartitions.zip. What is that file, and why do I need to flash it? It says I have to flash it in Slot A. Does TWRP give options to switch slots? I wish I could check but since my touch screen doesn't work in TWRP..
5 - During the actual ROM install part, the guide says Flash ROM.zip + TWRP_installer/boot.img ramdisk method Why do I need to install TWRP again? And what is the ramdisk method? How do you do that?
Can someone please explain in detail step by step what I need to do?
kerelberel said:
So I am not an entire noob when it comes to these things, I've flashed ROMs on phones for 8 years now, but this Moto G7 Power screwed me up good.
I tried installing CrDroid from this post. I didn't even notice the A/B part at first, I went through all the usual steps, I booted TWRP, then flashed it, rebooted into the installed TWRP, flashed CrDroid, GApps and Magisk and rebooted, hoping to start Android up. At that part it all screwed up. The phone didn't boot AT ALL, and after a while I found that blankflash zip file and managed to get into the bootloader again. The only thing I can do now is boot into TWRP, not flash, and when I boot, the touchscreen does not work.
So, where do I go from here? I now only have an unlocked bootloader to play with. What are the exact steps to flash the firmware? Why do I need to flash firmware to slot A anyway? Isn't or wasn't there firmware out of the box on the device? The guides for this phone are vague and people write really short and rambling sentences in the steps and mention certain files out of the blue without explanation or download link.
1 - Which firmware file do I need? I have an XT1955-4 bought in a Dutch shop called Belsimpel with no sim. I assume it's an international variant. Here is a download list of all the firmware variants, but how do I know which one to pick? Will it wipe things like IMEI data? The box says the type is M3C94, and it seems to be this international variant.
2 - In the bootloader, what commands do I need to put into adb when I want to flash the firmware to partition A?
3 - When I boot into TWRP, my touchscreen does not work, so how can I even use it?
4 - The 'guide' in the CrDroid thread suddenly mentions copypartitions.zip. What is that file, where do I download it, and why do I need to flash it? It says I have to flash it in Slot A. Does TWRP give options to switch slots?
5 - During the actual ROM install part, the guide says Flash ROM.zip + TWRP_installer/boot.img ramdisk method Why do I need to install TWRP again? And what is the ramdisk method? How do you do that?
Can someone please explain in detail step by step what I need to do?
Click to expand...
Click to collapse
1. go to settings - system - about phone check build number, this is the firmware you'll need
2. there's a thread here regarding that matter check again
3. I'm not aware of this issue
4. you'll only need to flash that file once coming from stock rom - https://androidfilehost.com/?fid=4349826312261636295
5. because it be overwritten by lineage recovery.
ramdisk method is just another way of installing twrp back when we still dont have the installer zip
vinoxflame said:
1. go to settings - system - about phone check build number, this is the firmware you'll need
2. there's a thread here regarding that matter check again
3. I'm not aware of this issue
4. you'll only need to flash that file once coming from stock rom - https://androidfilehost.com/?fid=4349826312261636295
5. because it be overwritten by lineage recovery.
ramdisk method is just another way of installing twrp back when we still dont have the installer zip
Click to expand...
Click to collapse
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
then try another version of twrp or the unofficial orangefox recovery for our device
vinoxflame said:
then try another version of twrp or the unofficial orangefox recovery for our device
Click to expand...
Click to collapse
I tried an older version of TWRP which didn't work either. I am not aware of Orangefox, but I don't see any mention, official or unofficial for the G7 Power. There's no mention in the G7 Power forum either.
kerelberel said:
I tried an older version of TWRP which didn't work either. I am not aware of Orangefox, but I don't see any mention, official or unofficial for the G7 Power. There's no mention in the G7 Power forum either.
Click to expand...
Click to collapse
it's on the telegram group
vinoxflame said:
it's on the telegram group
Click to expand...
Click to collapse
No it is not. There's no mention of G7 Power in the search results. Only E5.
kerelberel said:
No it is not. There's no mention of G7 Power in the search results. Only E5.
Click to expand...
Click to collapse
deleted
vinoxflame said:
https://t.me/mG7Power
tell me if it is not!!!!
Click to expand...
Click to collapse
From the desktop search in this one I couldn't find it: https://t.me/OrangeFoxRecovery I didn't know there was a separate chat for each device. But thanks.
FWIW when this happened to me I did the blankflash thing to get it back to bootloader. Then I used the LMSA tool from Motorola to do a rescue/restore.
I also used LMSA to force the update to the most recent security update. In general, it seems a very useful utility.
https://www.motorola.com/us/lenovo-motorola-smart-assistant
I had this issue after blankflashing this temperamental device out of a brick. While in twrp you can do "adb shell" then "twrp install /path/to/zip" I think this has to do with new twrp versions on older firmwares
kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
When i had this issue go reboot fastboot
then fastboot boot recovery.img or twrp as your boot img do what you need to do just dont flash it to boot only boot from it so you preserve your real boot should fix the touch screen part only time i had prob like this is when i flashed twrp to recovery without disabling dm verity etc. But I cant even get a stock OTA since I flashed twrp as recovery nor can I find a RETUS stock recovery.img so far if i had that I can update and keep magisk etc, then reflash twrp when im done.
---------- Post added at 06:06 PM ---------- Previous post was at 05:58 PM ----------
kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
When i had this issue go reboot fastboot
then fastboot boot recovery.img or twrp as your boot img do what you need to do just dont flash it to boot only boot from it so you preserve your real boot should fix the touch screen part only time i had prob like this is when i flashed twrp to recovery without disabling dm verity etc. But I cant even get a stock OTA since I flashed twrp as recovery nor can I find a RETUS stock recovery.img so far if i had that I can update and keep magisk etc, then reflash twrp when im done. The latest stock RETUS build i can find is here https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip but if i do that i will lose all my apps AGAIN etc I am trying to just get the stock recovery img from previous version so I can install the ota in magisk you just tap uninstall tap restore images to get stock boot as well then ota should work once its done go back into magisk and install to inactive slot but you will or could need TWRP A/B retention script so that you keep it even after ota...which you will first go in magisk tap uninstall restore images, but must have stock recovery not twrp installed at this time either from what i can tell, once ota is successful install the TWRP A/B Retention script but do this before you install magisk to inactive slot from magisk manager after that it should work. But I cannot locate a stock recovery.img thus far.... and I dont wanna redownload my apps right now, so I may just wait til I see a rom i really think ill like and say screw it.
kerelberel said:
I only have the boot loader, no stock ROM. I wiped that when I tried installing CrDroid, as I have written in my post. So I can't check my firmware if I don't have ROM installed. And I know which thread you mean because I linked the list of firmware from that thread in my post.
The big issue here is the touch screen not working. I can't do anything inside TWRP.
Click to expand...
Click to collapse
I also installed crDroid and after that twrp-3.3.1-2-ocean.img was not responding to touch, but twrp-3.3.1-0-ocean.img works. (btw I was doing a fastboot -w in between.)
Edit:
Ah nevermind, I have it constantly when installed, with both versions.
s33b said:
I also installed crDroid and after that twrp-3.3.1-2-ocean.img was not responding to touch, but twrp-3.3.1-0-ocean.img works. (btw I was doing a fastboot -w in between.)
Edit:
Ah nevermind, I have it constantly when installed, with both versions.
Click to expand...
Click to collapse
I've flashed another stock rom (https://forum.xda-developers.com/g7-power/how-to/guide-moto-g7-power-supra-flash-to-t3927138) and it worked with twrp-3.3.1-0-ocean.img not with the newest.
kerelberel said:
2 - In the bootloader, what commands do I need to put into adb when I want to flash the firmware to partition A?
Click to expand...
Click to collapse
You use fastboot commands in the bootloader.
The firmware contains a flash file with all fastboot commands you'll need.
kerelberel said:
3 - When I boot into TWRP, my touchscreen does not work, so how can I even use it?
Click to expand...
Click to collapse
TWRP has adb enabled by default. So instead of TWRP you can use
Code:
abd shell twrp --help
So you can use the basic functions like backup, install, and so on.
I had the same issue...
I'm not sure everyone is experiencing the same issue here, but I've been dealing with that exact problem the entire time I've had this phone. While this work around won't work every time, it will eventually work (for me within 3 tries). It doesn't matter if your "fastboot boot twrp.img" or running an installed version, all are the same. Even the latest 3.4.0.0.
As soon as you start recovery, start tapping the area of the screen where the "Advanced button" is in recovery. I mean tap as fast as you can, use two fingers if you need to. If it doesn't work right away, "adb reboot bootloader" and try again. I can get this to work within 3 tries. Its sucks and its stupid, but it works.
TheGuysGuysGuy said:
I'm not sure everyone is experiencing the same issue here, but I've been dealing with that exact problem the entire time I've had this phone. While this work around won't work every time, it will eventually work (for me within 3 tries). It doesn't matter if your "fastboot boot twrp.img" or running an installed version, all are the same. Even the latest 3.4.0.0.
As soon as you start recovery, start tapping the area of the screen where the "Advanced button" is in recovery. I mean tap as fast as you can, use two fingers if you need to. If it doesn't work right away, "adb reboot bootloader" and try again. I can get this to work within 3 tries. Its sucks and its stupid, but it works.
Click to expand...
Click to collapse
I getba link to one that works for u. https://t.me/CustoKernal_JavaShin_Mods/565. Fastboot boot (name of recovery)
roadkill42 said:
I getba link to one that works for u. https://t.me/CustoKernal_JavaShin_Mods/565. Fastboot boot (name of recovery)
Click to expand...
Click to collapse
Again not everyone is experiencing this same issue. A custom kernel isn't going to help when its incompatible with my ROM. My stupid workaround works for "No Touch Screen Response" in TWRP as well as OrangeFox. Its happened to me in both. Happily cruising along on Paranoid Android Quartz.
TheGuysGuysGuy said:
Again not everyone is experiencing this same issue. A custom kernel isn't going to help when its incompatible with my ROM. My stupid workaround works for "No Touch Screen Response" in TWRP as well as OrangeFox. Its happened to me in both. Happily cruising along on Paranoid Android Quartz.
Click to expand...
Click to collapse
The problem with the touch is the right driver needs to b installed that kernel I shared makes it work and stick I'm on it now go to tellagram group Moto g7 power support group both twrp and ofox there that works not the one from twrp it's self and the twrp there has some other features that one from official one has that don't work
This boot image gave me a touchscreen and allowed me to flash a regular twrp: hxxps://f.emvn.me/android-roms-and-stuff/twrp.3.4-kakarot.boot.img
Thanks to whoever made it.
Hi guys,
I made a mistake installing the Android 11 firmware update and afterwards flashing TWRP and installing Magisk.
Second mistake because I couldn't boot I flashed an old Fastboot ROM, but that doesn't help me.
Can anyone please point me to the fastboot rom for android 11 update?
Thank you very much.
ConsoleHax said:
Hi guys,
I made a mistake installing the Android 11 firmware update and afterwards flashing TWRP and installing Magisk.
Second mistake because I couldn't boot I flashed an old Fastboot ROM, but that doesn't help me.
Can anyone please point me to the fastboot rom for android 11 update?
Thank you very much.
Click to expand...
Click to collapse
Did you ever get any help? I am in the same boat.
ConsoleHax said:
Hi guys,
I made a mistake installing the Android 11 firmware update and afterwards flashing TWRP and installing Magisk.
Second mistake because I couldn't boot I flashed an old Fastboot ROM, but that doesn't help me.
Can anyone please point me to the fastboot rom for android 11 update?
Thank you very much.
Click to expand...
Click to collapse
I guess the best way to go back to stock is using msmtool you can find it here: with android 10 for international and European version: Thread '[OP7PRO][LATEST OOS 10.3.8 GM21AA | OOS 10.0.10 GM21BA] Collection of unbrick tools' https://forum.xda-developers.com/t/...0-gm21ba-collection-of-unbrick-tools.3956595/
Piricho said:
Did you ever get any help? I am in the same boat.
Click to expand...
Click to collapse
If you ended with a blinking TWRP just flash the stock/rooted boot.img if you are using stable you can obtain it here(Post in thread 'Android 11 Release - Finally!' https://forum.xda-developers.com/t/android-11-release-finally.4251267/post-84717089)
Or if you are on a Open Beta here: Thread 'OxygenOS Android 11 Betas (OnePlus 7 Pro) released (Open Beta 4 now available)' https://forum.xda-developers.com/t/...o-released-open-beta-4-now-available.4221067/
RokCruz said:
I guess the best way to go back to stock is using msmtool you can find it here: with android 10 for international and European version: Thread '[OP7PRO][LATEST OOS 10.3.8 GM21AA | OOS 10.0.10 GM21BA] Collection of unbrick tools' https://forum.xda-developers.com/t/...0-gm21ba-collection-of-unbrick-tools.3956595/
If you ended with a blinking TWRP just flash the stock/rooted boot.img if you are using stable you can obtain it here(Post in thread 'Android 11 Release - Finally!' https://forum.xda-developers.com/t/android-11-release-finally.4251267/post-84717089)
Or if you are on a Open Beta here: Thread 'OxygenOS Android 11 Betas (OnePlus 7 Pro) released (Open Beta 4 now available)' https://forum.xda-developers.com/t/...o-released-open-beta-4-now-available.4221067/
Click to expand...
Click to collapse
Hey,
I bricked my OP7 after what seemed like successfully installing and using Android 11. I am getting the Teamwin blinking brick.
This(
) seems like something I can do- flashing Fastboot ROM(even though I'll lose data, but wth). Can you please tell me if this comment of yours applies in my case- i.e. is the link you are suggesting for Android 11 Fastboot ROM valid?
saurabh_op7 said:
Hey,
I bricked my OP7 after what seemed like successfully installing and using Android 11. I am getting the Teamwin blinking brick.
This(
) seems like something I can do- flashing Fastboot ROM(even though I'll lose data, but wth). Can you please tell me if this comment of yours applies in my case- i.e. is the link you are suggesting for Android 11 Fastboot ROM valid?
Click to expand...
Click to collapse
Just flash stock boot.img
RokCruz said:
Just flash stock boot.img
Click to expand...
Click to collapse
As a rain check, as I am new to this, and don't want to screw up more,
You mean I can use this method-
Restore OnePlus 7/7T/7T Pro to Stock via Fastboot Commands - DroidWin
to flash the latest stable build on OnePlus support, i.e. this-
https://otafsg1.h2os.com/patch/amaz....P.35_OTA_0350_all_2103221240_3e944b9d067.zip(OnePlus7Oxygen_14.P.32_OTA_032_all_2101280019_b2a62765ba0c485e.zip)
??
Or do you suggest to use the Android 11 firmware available on XDA?
saurabh_op7 said:
As a rain check, as I am new to this, and don't want to screw up more,
You mean I can use this method-
Restore OnePlus 7/7T/7T Pro to Stock via Fastboot Commands - DroidWin
to flash the latest stable build on OnePlus support, i.e. this-
https://otafsg1.h2os.com/patch/amaz....P.35_OTA_0350_all_2103221240_3e944b9d067.zip(OnePlus7Oxygen_14.P.32_OTA_032_all_2101280019_b2a62765ba0c485e.zip)
??
Or do you suggest to use the Android 11 firmware available on XDA?
Click to expand...
Click to collapse
You can do it with the fastboot zip but you need to download all the firmware, in some threads you will find the stock/rooted boot.img from stable and OB, I shared both in this message
RokCruz said:
If you ended with a blinking TWRP just flash the stock/rooted boot.img if you are using stable you can obtain it here(Post in thread 'Android 11 Release - Finally!' https://forum.xda-developers.com/t/android-11-release-finally.4251267/post-84717089)
Or if you are on a Open Beta here: Thread 'OxygenOS Android 11 Betas (OnePlus 7 Pro) released (Open Beta 4 now available)' https://forum.xda-developers.com/t/...o-released-open-beta-4-now-available.4221067/
Click to expand...
Click to collapse
RokCruz said:
You can do it with the fastboot zip but you need to download all the firmware, in some threads you will find the stock/rooted boot.img from stable and OB, I shared both in this message
Click to expand...
Click to collapse
I am pretty sure I know my OS, but is there a way to find out?
I was running the stable, but flashing stock boot just led me to a boot loop with the Original Recovery, it's giving me options to
1. Wipe data and cache
2. Reboot to fastboot
3. Reboot to recovery
The fastboot flash commands above to flash stock OS didn't work, due to one error or another.
Anyhow, I had read somewhere fastboot continue works(here: it wasn't working before for me), so I tried that again, and now I am just stuck on 1+ Fastboot screen. I will wait it out to see if it boots into system.
Otherwise, I am thinking I reload fastboot and flash stock boot just like I did- and from there wipe data, but what do I expect then??
The way I see it, I am just stuck in some serious boot issue, and might eventually have to go down the path of msndownloadtool, any suggestion?
saurabh_op7 said:
I am pretty sure I know my OS, but is there a way to find out?
I was running the stable, but flashing stock boot just led me to a boot loop with the Original Recovery, it's giving me options to
1. Wipe data and cache
2. Reboot to fastboot
3. Reboot to recovery
The fastboot flash commands above to flash stock OS didn't work, due to one error or another.
Anyhow, I had read somewhere fastboot continue works(here: it wasn't working before for me), so I tried that again, and now I am just stuck on 1+ Fastboot screen. I will wait it out to see if it boots into system.
Otherwise, I am thinking I reload fastboot and flash stock boot just like I did- and from there wipe data, but what do I expect then??
The way I see it, I am just stuck in some serious boot issue, and might eventually have to go down the path of msndownloadtool, any suggestion?
Click to expand...
Click to collapse
Flashing the stock boot.img should be enough to boot into system without problems because TWRP can't decrypt data in android 11.
In this point you can try a factory reset from stock recovery this will keep device files but will erase all your config and apps
To figure out what version of firmware you had you can run this command in fastboot
Fastboot getvar all
RokCruz said:
Flashing the stock boot.img should be enough to boot into system without problems because TWRP can't decrypt data in android 11.
In this point you can try a factory reset from stock recovery this will keep device files but will erase all your config and apps
To figure out what version of firmware you had you can run this command in fastboot
Fastboot getvar all
Click to expand...
Click to collapse
Flashing didn't work to boot into system, I was just getting stuck in the Recovery boot loop, it finally booted into system once I wiped my data(files, music, etc -option);
I did try factory reset, only once I cleared the partition, did the boot loop give way to boot into system;
It booted back to Android 11, but it's all glitchy: Boot taking too long, WiFi not switching on, Call not working, Data is working though- basically it's very screwed up, got a couple of errors too- it's like watching an amnesiac old person.. if you get the gist.
So, now I am considering a stable build from Oneplus support website as a local upgrade and booting back to that..
I am hard pressed for options, let me know if you think something else works better, thanks!
saurabh_op7 said:
Flashing didn't work to boot into system, I was just getting stuck in the Recovery boot loop, it finally booted into system once I wiped my data(files, music, etc -option);
I did try factory reset, only once I cleared the partition, did the boot loop give way to boot into system;
It booted back to Android 11, but it's all glitchy: Boot taking too long, WiFi not switching on, Call not working, Data is working though- basically it's very screwed up, got a couple of errors too- it's like watching an amnesiac old person.. if you get the gist.
So, now I am considering a stable build from Oneplus support website as a local upgrade and booting back to that..
I am hard pressed for options, let me know if you think something else works better, thanks!
Click to expand...
Click to collapse
I guess msmtool it's the best way to restore your phone, remember that msmtool will re-lock your bootloader so if you want root you need to unlock your bootloader again.
Use msmtool and instructions form Here(there's an android 9 and android 10 for Global and Europe versions, use android 10)
RokCruz said:
I guess msmtool it's the best way to restore your phone, remember that msmtool will re-lock your bootloader so if you want root you need to unlock your bootloader again.
Use msmtool and instructions form Here(there's an android 9 and android 10 for Global and Europe versions, use android 10)
Click to expand...
Click to collapse
My model is GM1901, in support intro for the link you provided, that's not included?
saurabh_op7 said:
My model is GM1901, in support intro for the link you provided, that's not included?
Click to expand...
Click to collapse
Wait GM1901 is a OnePlus 7(non pro) right?
RokCruz said:
Wait GM1901 is a OnePlus 7(non pro) right?
Click to expand...
Click to collapse
Yeah.. ?
saurabh_op7 said:
Yeah.. ?
Click to expand...
Click to collapse
This is the OnePlus 7 pro forum so, I assume you was a 7 pro user, now all makes sense you don't flash the correct boot.img for your device so all woes wrong.
You need to use msmtool from Here
RokCruz said:
This is the OnePlus 7 pro forum so, I assume you was a 7 pro user, now all makes sense you don't flash the correct boot.img for your device so all woes wrong.
You need to use msmtool from HereI
Click to expand...
Click to collapse
Yeah man, I realised.. anyway, I flashed the boot image from Xda for OP7.. nevertheless, mom tool it is.. thanks..!
RokCruz said:
This is the OnePlus 7 pro forum so, I assume you was a 7 pro user, now all makes sense you don't flash the correct boot.img for your device so all woes wrong.
You need to use msmtool from Here
Click to expand...
Click to collapse
Hey, I am on Mac, I see that Msm is windows-specific.. any way out?
Update: I have been roaming around the corridors of this forum since about a week now. Thanks @RokCruz !!
Finally, used msm tool, although I suspect I still had the option of flashing TWRP and Magisk as I had access to phone and fastboot, but the system was super glitchy.
saurabh_op7 said:
Hey, I am on Mac, I see that Msm is windows-specific.. any way out?
Click to expand...
Click to collapse
I guess that the only way is using the fastboot ROM
RokCruz said:
I guess that the only way is using the fastboot ROM
Click to expand...
Click to collapse
Any idea if we're gonna get one soon?
Does anyone know where I can find a stock Rom preferably android 10 that I can flash in TWRP? I have the fastboot roms but when flashing vbmeta there is no partition choice to flash it to but the partition exists on both a and b slots after a gdisk print command. And I have no clue on how I would flash the bin files in TWRP. Also the same problem exists for bootloader and a few others just like vbmeta. I need stock because I completely screwed my A11 stock after a faulty magisk install and didn't know I couldn't install customs from A11. I've been away for a little bit and instead of doing homework I acted as if everything was the same from 10 to 11 and well...here I am. No computer access so fastboot is out of the question. Am I screwed until I have computer access? Thanks again,
Rooster
bigrooster88 said:
Does anyone know where I can find a stock Rom preferably android 10 that I can flash in TWRP? I have the fastboot roms but when flashing vbmeta there is no partition choice to flash it to but the partition exists on both a and b slots after a gdisk print command. And I have no clue on how I would flash the bin files in TWRP. Also the same problem exists for bootloader and a few others just like vbmeta. I need stock because I completely screwed my A11 stock after a faulty magisk install and didn't know I couldn't install customs from A11. I've been away for a little bit and instead of doing homework I acted as if everything was the same from 10 to 11 and well...here I am. No computer access so fastboot is out of the question. Am I screwed until I have computer access? Thanks again,
Rooster
Click to expand...
Click to collapse
Hi rooster, have a look at the link below. The rom is from trusted guys who have been doing moto stuff for years. Follow the instructions, and hopefully you have a good result.
Motorola Stock ROM: Sofiap // Pro
telegra.ph
Beetle84 said:
Hi rooster, have a look at the link below. The rom is from trusted guys who have been doing moto stuff for years. Follow the instructions, and hopefully you have a good result.
Motorola Stock ROM: Sofiap // Pro
telegra.ph
Click to expand...
Click to collapse
OK brother I just flashed the Rom following all instructions minus erase userdata, which is a step I usually take but I don't have fastboot right now, and it's still booting up has been for 2-3 minutes but it finally vibrated when I started it up so I'm expecting good things. Thanks so much....and there she is she started lol perfect timing! You have helped me so much as this is my daily now that I've lost my OnePlus.
Edit
everything seems to be working fine except for my calls. They don't come through but they show as missed and when I try to dial out it goes to call but then goes straight to call ended. Everything else is working tho.
One more thing..is there a certain process to root? When I flashed the magisk zip it sent me into a boot loop.