Related
hello everyone.
hey mangtas...
pressing three buttons seems not working.
I try to : - this
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cache cache.img
Have trouble after flashing it says sucess, try to fastboot reboot, still get the message your device is booting now. freeze
I´ve heard some people said it work after this Stock rom flash..= L29- B180
I don´t get it.
Is this the only solution? I mean I can only enter Fastboot.
Sent from my HUAWEI NXT-L29
Cheng Qiang said:
hello everyone.
hey mangtas...
pressing three buttons seems not working.
I try to : - this
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cache cache.img
Have trouble after flashing it says sucess, try to fastboot reboot, still get the message your device is booting now. freeze
I´ve heard some people said it work after this Stock rom flash..= L29- B180
I don´t get it.
Is this the only solution? I mean I can only enter Fastboot.
Sent from my HUAWEI NXT-L29
Click to expand...
Click to collapse
Did you checked if you flashed the right firmware for your variant?
Sent from my HUAWEI NXT-L29 using XDA-Developers mobile app
yes of course. = C432...B180 international
after it says flashing sucesss try to reboot.... thats strange.
What I didn.t mention is I can.t erase the old boot,system, and recovery.img which says
FaiL - Command not allowed.
is there something wrong? windows 10?
http://www.huaweiblog.de/downloads/huawei-mate-8-offizielle-firmware-b180-wird-verteilt/
please check link. thats from these source.
Ok lets try this, unlock the bootloader again using SRKtool Huawei all instruction is inside the software. after sucessfully unlocking the loader install the stock recovery img its also inside the SRKtool..then thats the time try to flash the stock firmware. just give it a try
.
Mangtas, can you check the control panel what device name when you connect your huawei?
- When I try to type Adb devices it doesn.t found ..
Might it be the reason?
Cheng Qiang said:
Mangtas, can you check the control panel what device name when you connect your huawei?
- When I try to type Adb devices it doesn.t found ..
Might it be the reason?
Click to expand...
Click to collapse
My device name is written in some kind of numbers and letters.
Sent from my HUAWEI NXT-L29 using XDA-Developers mobile app
---------- Post added at 07:20 PM ---------- Previous post was at 07:19 PM ----------
Cheng Qiang said:
Mangtas, can you check the control panel what device name when you connect your huawei?
- When I try to type Adb devices it doesn.t found ..
Might it be the reason?
Click to expand...
Click to collapse
Can you do fastboot mode with your mate 8?
Sent from my HUAWEI NXT-L29 using XDA-Developers mobile app
Mangtas_666 said:
My device name is written in some kind of numbers and letters.
Sent from my HUAWEI NXT-L29 using XDA-Developers mobile app
---------- Post added at 07:20 PM ---------- Previous post was at 07:19 PM ----------
Can you do fastboot mode with your mate 8?
Sent from my HUAWEI NXT-L29 using XDA-Developers mobile app
Click to expand...
Click to collapse
Of course I can do fastboot as long Bootlader is not locked. If this not working I will relock and going to send to repair.
=> Can you type adb devices? Is that normal if it is not found? I.m on Windows 10...
I was thinking about why I can.t enter Recovery mode even with the buttons.
i am going to share this post because this is not available here,
How to Root your Doogee BL7000
1. download twrp recovery https://androidfilehost.com/?fid=817906626617934998
2. unlock bootloader using this code
Code:
fastboot oem unlock
3. flash twrp using this code
Code:
fastboot flash recovery 'file name with format'
4. then download magisk https://forum.xda-developers.com/apps/magisk/mod-magisk-v1-universal-systemless-t3432382
5. reboot to recovery and create a backup of your ROM and then flash Magisk..
twrp taken from this article-
https://romprovider.com/2017/09/twrp-recovery-root-doogee-bl7000/
Hi, where to write the code?
Tgere is an option in developer options to unlock bootloader, does it work?
Talionator said:
Hi, where to write the code?
Tgere is an option in developer options to unlock bootloader, does it work?
Click to expand...
Click to collapse
in CMD if you don't know you can use included Script
Alright, but where to find doggee bl7000 drivers I cant find them
---------- Post added at 12:49 PM ---------- Previous post was at 12:49 PM ----------
Its stuck on waiting for device
Means no Driver Installed on Your PC
mark332 said:
Means no Driver Installed on Your PC
Click to expand...
Click to collapse
phone got bootloop on orange state on logo
Mine got too
Talionator said:
phone got bootloop on orange state on logo
Click to expand...
Click to collapse
What i'm supposed to do ??? Mine got bootlooped too !
Bootloop
You must follow that instruction i got a bootloop after that i fixed it
community.doogee.cc/forum.php?mod=viewthread&tid=228&extra=page%3D1
and please use that firmware only for Dodgee BL7000
mega.nz/#!4W40QayS!8R7cJ6H0TwNPJpVQWpRWepGWI2Z0DiKC9A7GSHPlTz4
Hello. Do you know where to find a twrp for Doogee Bl12000 ? I can't find any. Thanks.
Bootloader is unlocked. I keep watching Needrom. Nothing so far ?
Found a TWRP at a russian site. "Rulsmart.com". No idea if it's reliable. No use anyway, because the zip file is encrypted.
Christian1968.Bolz said:
Hello. Do you know where to find a twrp for Doogee Bl12000 ? I can't find any. Thanks.
Bootloader is unlocked. I keep watching Needrom. Nothing so far ?
Found a TWRP at a russian site. "Rulsmart.com". No idea if it's reliable. No use anyway, because the zip file is encrypted.
Click to expand...
Click to collapse
I have the same phone, same question. Maybe the bl7000 way works for bl12000 too? Justin the TWRP infos. I will root with Magisk
---------- Post added at 08:20 AM ---------- Previous post was at 08:16 AM ----------
mark332 said:
i am going to share this post because this is not available here,
How to Root your Doogee BL7000
1. download twrp recovery https://androidfilehost.com/?fid=817906626617934998
2. unlock bootloader using this code
Code:
fastboot oem unlock
3. flash twrp using this code
Code:
fastboot flash recovery 'file name with format'
4. then download magisk https://forum.xda-developers.com/apps/magisk/mod-magisk-v1-universal-systemless-t3432382
5. reboot to recovery and create a backup of your ROM and then flash Magisk..
twrp taken from this article-
https://romprovider.com/2017/09/twrp-recovery-root-doogee-bl7000/
Click to expand...
Click to collapse
I have a BL12000 and i am looking for install TWRP. May these steps works for it too?
steathnic666 said:
I have the same phone, same question. Maybe the bl7000 way works for bl12000 too? Justin the TWRP infos. I will root with Magisk
---------- Post added at 08:20 AM ---------- Previous post was at 08:16 AM ----------
I have a BL12000 and i am looking for install TWRP. May these steps works for it too?
Click to expand...
Click to collapse
Not work
You can use Magisk for initial root
or wait while someone compile
After i followed the Instructions with the BL7000 unlock/root/ twrp tool , the bootloader was unlocked but the phone soft-bricked....Imei gone of course....back to stock rom....well...i tried to flash Twrp with flashtool, "size too big"
then tried to flash a smaller version of Twrp (13Mb ver. 3.2.1.0) that lead into total blackness....back to regular recovery...voila.....i dont wanna try the Tool again .....bootloader is still unlocked
i am giving up for now....
cheers...
Is there ANY working root method for the BL12000 (NOT pro) ? I've been looking for months now without success
hi my phone is stuck in a boot loop the doogee logo shows up after a couple of seconds screen turns off and doogee logo shows up again
i try to boot into recovery mode but nothing happens phone just turns on and bootloops i plug into my pc and get the usb connected sound then the usb disconnected sound then phone just bootloops can you help
NOTE :
unlocking bootloader wipe your data
Root at your own risk
i am not responsible for any data loss or brick
1. Bootloader Unlocking
1.Download & install adb driver
For Cos Download
For RMUI Download
Rest of the steps are same for RMUI & COS
2.Enable devloper mode by taping on version(setting->about phone) then enable Oem Unlock & usb debugging from (additional settings->Devloper option)
3.Now connect device & open adb path & run cmd
command: adb devices
then reboot to bootloader
command: adb reboot bootloader
4.unlock bootloader
command: fastboot flashing unlock phone will ask to confirm
5.now reboot to system
command:fastboot reboot
If you stuck at waiting for device screen then follow video from gdrive link
2.1 TWRP [Official]
https://forum.xda-developers.com/android/development/recovery-twrp-recovery-realme-c2-t4139571
2.2 PBRP [Official]
https://pitchblackrecovery.com/rmx1941/
3.Root
1.boot into recovery
2. Flash magisk .zip
3. Flash vbmeta.img or zip
Vbmeta download link at bottom
Link: https://github.com/topjohnwu/Magisk/releases/
4.Stock Firmware Files
Stock boot ,stock recovery & Full Firmware are added
To Flash full firmware
Extract zip & run flash.bat
5.Twrp flashable Stock Rom
Boot into twrp & factory reset & flash zip
If Device rebooting to recovery reboot to bootloader & run fastboot erase para
Link to download all files
https://sourceforge.net/projects/realme-c2/files/
6.Gsi Installation Guide
https://forum.xda-developers.com/android/software/gsi-installation-guide-realme-c2-t4148151
For gsi installation fix ,decrypt & debloat
Join our telegram group https://t.me/RealmeC2Community
Hard Brick fix
Here
any help ask on https://t.me/RealmeC2Community
HIT THANKS BUTTON IF ABOVE INFORMATION IS HELPFUL TO YOU
siddhrsh said:
NOTE :
unlocking bootloader wipe your data
Root at your own risk
i am not responsible for any data loss or brick
1. Unlock Bootloader
1.Download & install adb driver https://forum.xda-developers.com/showthread.php?t=2588979
2.Enable devloper mode by taping on version(setting->about phone) then enable Oem Unlock & usb debugging from (additional settings->Devloper option)
3.Now connect device & open adb path & run cmd
command: adb devices
then reboot to bootloader
command: adb reboot bootloader
4.unlock bootloader
command: fastboot flashing unlock phone will ask to confirm
5.now reboot to system
command:fastboot reboot
2.Root
Unlock Bootloader required
1.Reboot phone to bootloader
2.flash vbmeta.img **compulsory**
command: fastboot flash vbmeta vbmeta.img
https://mega.nz/#!84olnAhI!XDhfNmRCyaB_9Ly5_py06MaqrHquSAq1YOeWI23V3eI
3. flash patchedboot.img
IMAGE ONLY FOR RMX1941EX_11_B.15 ONLY make sure you are on same build
command: fastboot flash boot patchedboot.img
https://mega.nz/#!Isw1RQTZ!iboZ6R4M-S4czdelcUjvLYi1VP5M__M6D7XOsFQsriQ
4.reboot to system & install magisk manager app from official site & follow the instructions
Click to expand...
Click to collapse
Thanks a lot man. It's working
---------- Post added at 05:59 PM ---------- Previous post was at 05:58 PM ----------
I ported a twrp also. But not able to find key combination to boot the same. Can u guide?
addy692 said:
Thanks a lot man. It's working
---------- Post added at 05:59 PM ---------- Previous post was at 05:58 PM ----------
I ported a twrp also. But not able to find key combination to boot the same. Can u guide?
Click to expand...
Click to collapse
Can you send me ported twrp? There is only one key combination to boot into fastboot by Volume down + power
To boot into recovery use adb reboot recovery
To boot into download mode tap on i button before version in recovery but it does not boot into download mode
siddhrsh said:
Can you send me ported twrp? There is only one key combination to boot into fastboot by Volume down + power
To boot into recovery use adb reboot recovery
To boot into download mode tap on i button before version in recovery but it does not boot into download mode
Click to expand...
Click to collapse
https://drive.google.com/file/d/1D9O3AKkQRK9QARmqgv56QWUEgwPTY-R1/view?usp=drivesdk
I am stuck at fastboot, I wiped the system and installed gsi but gsi not booting and not able to enter recovery due to no key combination.
Please help.
---------- Post added at 06:29 PM ---------- Previous post was at 06:25 PM ----------
addy692 said:
https://drive.google.com/file/d/1D9O3AKkQRK9QARmqgv56QWUEgwPTY-R1/view?usp=drivesdk
I am stuck at fastboot, I wiped the system and installed gsi but gsi not booting and not able to enter recovery due to no key combination.
Please help.
Click to expand...
Click to collapse
Also fastboot boot twrp.img not working.
Twrp image shared is working fine for flashing and other things.
addy692 said:
https://drive.google.com/file/d/1D9O3AKkQRK9QARmqgv56QWUEgwPTY-R1/view?usp=drivesdk
I am stuck at fastboot, I wiped the system and installed gsi but gsi not booting and not able to enter recovery due to no key combination.
Please help.
---------- Post added at 06:29 PM ---------- Previous post was at 06:25 PM ----------
Also fastboot boot twrp.img not working.
Twrp image shared is working fine for flashing and other things.
Click to expand...
Click to collapse
Boot into bootloader by holding volume down & plug usb then Flash arm64 A/B it will boot i have tried aosp system img says arm64 a only but it will not work
How did you port if you used stock recovery as base is it decrypted?
siddhrsh said:
Boot into bootloader by holding volume down & plug usb then Flash arm64 A/B it will boot i have tried aosp system img says arm64 a only but it will not work
How did you port if you used stock recovery as base is it decrypted?
Click to expand...
Click to collapse
I formatted the data from twrp. And then flashed the A only gsi image in system.
So our device will support A/B gsi?
addy692 said:
I formatted the data from twrp. And then flashed the A only gsi image in system.
So our device will support A/B gsi?
Click to expand...
Click to collapse
Yes use ARM64 A/B
how you format data ? Twrp boot?
Custom rom
Did anyone try any custom roms on the device?
silentkiller21 said:
Did anyone try any custom roms on the device?
Click to expand...
Click to collapse
You can flash gsi image
Aosp arm64 A/B gsi image work only
siddhrsh said:
You can flash gsi image
Aosp arm64 A/B gsi image work only
Click to expand...
Click to collapse
Did you try it?
Any chance that I willl end up bricking my device and make it unrecoverable?
---------- Post added at 02:19 PM ---------- Previous post was at 02:09 PM ----------
addy692 said:
I formatted the data from twrp. And then flashed the A only gsi image in system.
So our device will support A/B gsi?
Click to expand...
Click to collapse
The device just supports the slot A
Did you manage to install the stock rom?
silentkiller21 said:
Did you try it?
Any chance that I willl end up bricking my device and make it unrecoverable?
Click to expand...
Click to collapse
Yes it boots you can flash stock image via fastboot if it doesn't boot
I tried the latest update boot image but it did not work and now trapped in infinite bootloop. Any solution for my situation now?
BilalMaximus said:
I tried the latest update boot image but it did not work and now trapped in infinite bootloop. Any solution for my situation now?
Click to expand...
Click to collapse
Download new patchedboot & flash it
siddhrsh said:
Download new patchedboot & flash it
Click to expand...
Click to collapse
Ok, now retrying
---------- Post added at 11:30 AM ---------- Previous post was at 11:25 AM ----------
siddhrsh said:
Download new patchedboot & flash it
Click to expand...
Click to collapse
It work. Thanks man!
realme C2 RMX 1945 A.11.17 BOOTLOOP need boot.img and vbmeta.img
siddhrsh said:
Download new patchedboot & flash it
Click to expand...
Click to collapse
My device its bootloop please HELP
Send me
Boot.img and vbmeta.img file
For realme C2 RMX 1945 1 1.A.17
Help.......
SOS
---------- Post added at 06:05 AM ---------- Previous post was at 05:57 AM ----------
How to Root Realme C2
RMX 1945 11.A.17
Please send pachboot.img
For magisk root
Please guys help. . . . . . . . .
If I am having another build other than the one mentioned by TS, how should I fix or getting the boot image?
And is GSI flashing necessary if I stick to the stock ROM?
Thanks!
hello everyone can i please get the stock recovery.img for realme c2 rmx1941 i will be very thankful
---------- Post added at 09:31 PM ---------- Previous post was at 08:39 PM ----------
help please i need stock recovery.img for realme c2 rmx 1941
addy692 said:
Thanks a lot man. It's working
---------- Post added at 05:59 PM ---------- Previous post was at 05:58 PM ----------
I ported a twrp also. But not able to find key combination to boot the same. Can u guide?
Click to expand...
Click to collapse
help please i need stock recovery.img for realme c2 rmx 1941 thank you
---------- Post added at 12:10 PM ---------- Previous post was at 11:34 AM ----------
siddhrsh said:
Yes it boots you can flash stock image via fastboot if it doesn't boot
Click to expand...
Click to collapse
sir i need stock recovery.img for realme c2 rmx1941 thank you
GuestD0943 said:
hello everyone can i please get the stock recovery.img for realme c2 rmx1941 i will be very thankful
---------- Post added at 09:31 PM ---------- Previous post was at 08:39 PM ----------
help please i need stock recovery.img for realme c2 rmx 1941
Click to expand...
Click to collapse
Check New Link
dillusi said:
If I am having another build other than the one mentioned by TS, how should I fix or getting the boot image?
And is GSI flashing necessary if I stick to the stock ROM?
Thanks!
Click to expand...
Click to collapse
you need to update device via sideloading update or need to flash old stock image
Hello guys,
I've bricked my Realme 2.
I installed OrangeFox, it worked well. Then I installed Twrp, it worked well too.
But when I exited the Recovery Mode, it started to hang the logo. So I tried to flash the Recovey.img in the stock rom and from then on, my phone stuck in the Fastboot mode only. When we choose Recovery, it back to the fastboot mode again.
I can't do anything. Anyone here can help me to reflash the stock rom? Thank you!
newbie* said:
Hello guys,
I've bricked my Realme 2.
I installed OrangeFox, it worked well. Then I installed Twrp, it worked well too.
But when I exited the Recovery Mode, it started to hang the logo. So I tried to flash the Recovey.img in the stock rom and from then on, my phone stuck in the Fastboot mode only. When we choose Recovery, it back to the fastboot mode again.
I can't do anything. Anyone here can help me to reflash the stock rom? Thank you!
Click to expand...
Click to collapse
Reflash the recovery (twrp) and flash any custom rom similar to realme 2
newbie* said:
Hello guys,
I've bricked my Realme 2.
I installed OrangeFox, it worked well. Then I installed Twrp, it worked well too.
But when I exited the Recovery Mode, it started to hang the logo. So I tried to flash the Recovey.img in the stock rom and from then on, my phone stuck in the Fastboot mode only. When we choose Recovery, it back to the fastboot mode again.
I can't do anything. Anyone here can help me to reflash the stock rom? Thank you!
Click to expand...
Click to collapse
Have you unbricked that
how can i unbrick? Have same stuck problem
hiren24601 said:
Have you unbricked that
Click to expand...
Click to collapse
stuck in fastboot mode, i have tried to flash the twrp.img through cmd, it shows success but when i goto recovery mode, again fastboot mode comes, and the loop continues.
guys pls help completely stuck in the fast boot mode
i have tried to flash the twrp.img but it shows again the same !!!!!!!!!!
saier said:
guys pls help completely stuck in the fast boot mode
i have tried to flash the twrp.img but it shows again the same !!!!!!!!!!
Click to expand...
Click to collapse
BRO SAME PROBLEM for me also it shown twrp is successfully done, But when I trying to enter into twrp recovery its not open and it again booting into fastboot recovery mode.
please help me :crying:
vijay mahar said:
BRO SAME PROBLEM for me also it shown twrp is successfully done, But when I trying to enter into twrp recovery its not open and it again booting into fastboot recovery mode.
please help me :crying:
Click to expand...
Click to collapse
Did you find the solution?
did anyone find the solution?
---------- Post added at 10:38 AM ---------- Previous post was at 10:12 AM ----------
same problem ....solution plz
Samarpan68 said:
did anyone find the solution?
---------- Post added at 10:38 AM ---------- Previous post was at 10:12 AM ----------
same problem ....solution plz
Click to expand...
Click to collapse
Flash vbmeta.img
How to Download vmeta.img ?
Please give me the link
Itzmesub said:
How to Download vmeta.img ?
Please give me the link
Click to expand...
Click to collapse
Please quote him, so he can able to know you ask him.
thatha said:
Flash vbmeta.img
Click to expand...
Click to collapse
Sir, please give me the link & flashing method, please help me sir ?
Itzmesub said:
Sir, please give me the link & flashing method, please help me sir
Click to expand...
Click to collapse
https://t.me/realmeC12
Flash vbmeta.img in fastboot mode
Thank you bro!
I need a twrp test can someone test it
Join Group TG Redmi9A_Official
Hi, I have a friend who comes around 9am this morning, I have already tested all the methods to try to root this model redmi 9a dandelion but there is nothing to do, you need a TWRP no choice, I want to test the holds if you have one. But I can test that when my friend is there, he is the one who has redmi 9a and I confirm I have unlocked his bootloader
I have a redmi 9a but I need a twrp for it. I can test twrp for redmi 9a
Hi i'm dev and i got redmi 9a today but i'm waiting for bootloader.
I'm gonna make one and you can test it.
Tigrouzen said:
Hi i'm dev and i got redmi 9a today but i'm waiting for bootloader.
I'm gonna make one and you can test it.
Click to expand...
Click to collapse
Waiting for your good news, bro
Ssmiles said:
Hi, I have a friend who comes around 9am this morning, I have already tested all the methods to try to root this model redmi 9a dandelion but there is nothing to do, you need a TWRP no choice, I want to test the holds if you have one. But I can test that when my friend is there, he is the one who has redmi 9a and I confirm I have unlocked his bootloader
Click to expand...
Click to collapse
did you try VBMETA Patched Image method?
yes I tried, the orders pass well no error but no change afterwards !!!
Good and bad news i'm on recovery but got some issue with screen fb. If you know how install zip under terminal it is good for you or wait
Recovery.img also vbmeta.img if doesn't work
https://gofile.io/d/zKb2DW
Tigrouzen said:
Good and bad news i'm on recovery but got some issue with screen fb. If you know how install zip under terminal it is good for you or wait
Recovery.img also vbmeta.img if doesn't work
Click to expand...
Click to collapse
I will wait till you solve the issue and thanks in advance
Does not boot
Tigrouzen said:
Good and bad news i'm on recovery but got some issue with screen fb. If you know how install zip under terminal it is good for you or wait
Recovery.img also vbmeta.img if doesn't work
I tried to boot it without flashing ( via fastboot boot recovery.img ) and phone started normally instead of recovery mode.
Click to expand...
Click to collapse
I tried to boot it without flashing ( via fastboot boot recovery.img ) and phone started normally instead of recovery mode.[/QUOTE]
how to do this?
qqpin said:
I tried to boot it without flashing ( via fastboot boot recovery.img ) and phone started normally instead of recovery mode.
Click to expand...
Click to collapse
how to do this?[/QUOTE]
adb reboot bootloader
fastboot boot recovery.img (Here we replace "flash" with "boot" so in case recovery does not work, we don't have it flashed in system)
Tigrouzen said:
Good and bad news i'm on recovery but got some issue with screen fb. If you know how install zip under terminal it is good for you or wait
Recovery.img also vbmeta.img if doesn't work
https://gofile.io/d/zKb2DW
Click to expand...
Click to collapse
are you able to root it with magisk using your recovery?
ahsan.ey.ca said:
how to do this?
Click to expand...
Click to collapse
adb reboot bootloader
fastboot boot recovery.img (Here we replace "flash" with "boot" so in case recovery does not work, we don't have it flashed in system)[/QUOTE]
not working
News need adapt fstab for 9A also data is encrypted
Tigrouzen said:
News
Click to expand...
Click to collapse
I tried to boot it but it did not take me to recovery, instead normal restart. How did you install it? M not a developer, so please guide.
ahsan.ey.ca said:
I tried to boot it but it did not take me to recovery, instead normal restart. How did you install it? M not a developer, so please guide.
Click to expand...
Click to collapse
magisk don't work because of encryption. Magisk installed right under twrp but it doesnt work. I also formatted the data it boots but because of something it reboots even though it writes well to unencrypted data. Maybe rom miui does not accept. Need maybe rom other
Just flash vbmeta
fastboot flash vbmeta vbmeta.img
fastboot flash recovery recovery.img
fastboot reboot and hold volup
wait some
in last version works better with graphic but now need correct fstab to mount correctely partition
---------- Post added at 01:54 PM ---------- Previous post was at 01:43 PM ----------
Last test twrp with graphic and mtp mounted you can install magisk but it is not work after
https://gofile.io/d/jp6i3z
Tigrouzen said:
magisk don't work because of encryption. Magisk installed right under twrp but it doesnt work. I also formatted the data it boots but because of something it reboots even though it writes well to unencrypted data. Maybe rom miui does not accept. Need maybe rom other
Just flash vbmeta
fastboot flash vbmeta vbmeta.img
fastboot flash recovery recovery.img
fastboot reboot and hold volup
wait some
in last version works better with graphic but now need correct fstab to mount correctely partition
---------- Post added at 01:54 PM ---------- Previous post was at 01:43 PM ----------
Last test twrp with graphic and mtp mounted you can install magisk but it is not work after
https://gofile.io/d/jp6i3z
Click to expand...
Click to collapse
If Magisk is not working, can we install superSu with your recovery? Will it work?
ahsan.ey.ca said:
If Magisk is not working, can we install superSu with your recovery? Will it work?
Click to expand...
Click to collapse
for the moment can't mount system
Tigrouzen said:
Good and bad news i'm on recovery but got some issue with screen fb. If you know how install zip under terminal it is good for you or wait
Recovery.img also vbmeta.img if doesn't work
https://gofile.io/d/zKb2DW
Click to expand...
Click to collapse
Tigrouzen said:
magisk don't work because of encryption. Magisk installed right under twrp but it doesnt work. I also formatted the data it boots but because of something it reboots even though it writes well to unencrypted data. Maybe rom miui does not accept. Need maybe rom other
Just flash vbmeta
fastboot flash vbmeta vbmeta.img
fastboot flash recovery recovery.img
fastboot reboot and hold volup
wait some
in last version works better with graphic but now need correct fstab to mount correctely partition
---------- Post added at 01:54 PM ---------- Previous post was at 01:43 PM ----------
Last test twrp with graphic and mtp mounted you can install magisk but it is not work after
[]
Click to expand...
Click to collapse
I flashed twrp and I can see the twrp in my phone but it does not recognize my touch input.
so that's why I cannot swipe for modification
any fix for that?