Related
I was on KangVip b168, on my NXT-n29 . Was supposed to return to stock using fastboot to flash Boot, recovery, system and cust. images. But Fastboot didnt work and gave me "FAILED (remote : Command not allowed)
I then flashed the update.zip in twrp and rebooted. twrp was then gone. Now I tried to flash twrp in fastboot but I get the same error. Command not allowed.
Any suggestions ?
Filgaliel said:
I was on KangVip b168, on my NXT-n29 . Was supposed to return to stock using fastboot to flash Boot, recovery, system and cust. images. But Fastboot didnt work and gave me "FAILED (remote : Command not allowed)
I then flashed the update.zip in twrp and rebooted. twrp was then gone. Now I tried to flash twrp in fastboot but I get the same error. Command not allowed.
Any suggestions ?
Click to expand...
Click to collapse
did you enabled find my phone option in kingvip rom?
---------- Post added at 02:37 AM ---------- Previous post was at 02:15 AM ----------
i had the same problem with my mate8 i could not fix it with any way i replaced it with new one
my problem is becuse i enabled hind my phone option in kingvip and could not go back to kingvup to disable it
find my phone if enabled it block fastboot to flash any thing
rowihel2012 said:
did you enabled find my phone option in kingvip rom?
---------- Post added at 02:37 AM ---------- Previous post was at 02:15 AM ----------
i had the same problem with my mate8 i could not fix it with any way i replaced it with new one
my problem is becuse i enabled hind my phone option in kingvip and could not go back to kingvup to disable it
find my phone if enabled it block fastboot to flash any thing
Click to expand...
Click to collapse
I dont remember if I did.. How did you fix it then ?
Filgaliel said:
I dont remember if I did.. How did you fix it then ?
Click to expand...
Click to collapse
if you did that you must disable it
install hicloud from google then disable find my phone from it
rowihel2012 said:
if you did that you must disable it
install hicloud from google then disable find my phone from it
Click to expand...
Click to collapse
Hicloud from where? On pc or on phone ?
rowihel2012 said:
if you did that you must disable it
install hicloud from google then disable find my phone from it
Click to expand...
Click to collapse
Could you please be a bit more specific?? Thanks.
Hi. Earlier I had lollipop version of android on my Honor 6 phone. A month back, I upgraded to Marshmallow version B831. Since then, I am not able to connect to mobile data. 2G/3G is not working on my phone. Please let me know what should I do.
Also if I navigate to About Phone ->>Status, I can see that Mobile data state is saying as Disconnected.
I think you should back up and do a phone reset
goldfinv said:
I think you should back up and do a phone reset
Click to expand...
Click to collapse
I did it yesterday. Is it possible to go back to Lollipop?
iamsonal said:
I did it yesterday. Is it possible to go back to Lollipop?
Click to expand...
Click to collapse
Yes. Download the full update package, then download HuaweiUpdateExtractor
Then. Download Multi tool
And run. Select U to Unbrick. Follow the on-screen instructions to extract the required files from the UPDATE package downloaded. Copy to the Unbrick folder and continue the process. Your phone should be on lollipop at the end.
goldfinv said:
Yes. Download the full update package, then download HuaweiUpdateExtractor
Then. Download Multi tool
And run. Select U to Unbrick. Follow the on-screen instructions to extract the required files from the UPDATE package downloaded. Copy to the Unbrick folder and continue the process. Your phone should be on lollipop at the end.
Click to expand...
Click to collapse
Is there any tutorial step by step to perform the downgrade process to Lollipop version?
Yes. There are a few in the forums
@iamsonal follow this if you don't want to use Multi Tool
Extract system.img, boot,img, cust.img, recovery.img from the UPDATE.APP using Huawei Update Extractor tool
Flash those files by first booting your device into fastboot mode, and then firing these commands:
Code:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
Remember that the command should be executed from the folder where these files are there.
After doing this do the three button update using that UPDATE.APP from which you extracted these files.
DigiGoon said:
@iamsonal follow this if you don't want to use Multi Tool
Extract system.img, boot,img, cust.img, recovery.img from the UPDATE.APP using Huawei Update Extractor tool
Flash those files by first booting your device into fastboot mode, and then firing these commands:
Code:
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash recovery recovery.img
Remember that the command should be executed from the folder where these files are there.
After doing this do the three button update using that UPDATE.APP from which you extracted these files.
Click to expand...
Click to collapse
When I fire this command
fastboot devices
It opens a screen with android logo, saying PHONE Locked. Will I be able to fire the fastboot commands?
iamsonal said:
When I fire this command
fastboot devices
It opens a screen with android logo, saying PHONE Locked. Will I be able to fire the fastboot commands?
Click to expand...
Click to collapse
Nope, you have to unlock your bootloader first.
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
Do you have the Unlock Code bro???
DigiGoon said:
Nope, you have to unlock your bootloader first.
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
Do you have the Unlock Code bro???
Click to expand...
Click to collapse
No. What should I do now?
iamsonal said:
No. What should I do now?
Click to expand...
Click to collapse
Don't worry follow this guide to unlock your bootloader first.
WARNING: UNLOCKING BOOTLOADER WILL WIPE YOUR DATA AND YOUR WARRANTY WILL GET VOID.
DigiGoon said:
Don't worry follow this guide to unlock your bootloader first.
WARNING: UNLOCKING BOOTLOADER WILL WIPE YOUR DATA AND YOUR WARRANTY WILL GET VOID.
Click to expand...
Click to collapse
Thanks. Let me check.
iamsonal said:
Thanks. Let me check.
Click to expand...
Click to collapse
Good luck.
Nothing
iamsonal said:
Nothing
Click to expand...
Click to collapse
What do you mean?
DigiGoon said:
What do you mean?
Click to expand...
Click to collapse
I mean when I am trying to press the 3 buttons simultaneously, it only displays the Honor booticon. It doesn't display any other screen.
iamsonal said:
I mean when I am trying to press the 3 buttons simultaneously, it only displays the Honor booticon. It doesn't display any other screen.
Click to expand...
Click to collapse
You put UPDATE.APP in dload folder of your External SDCARD no?
DigiGoon said:
You put UPDATE.APP in dload folder of your External SDCARD no?
Click to expand...
Click to collapse
I had. But I think it might have been deleted while unlocking bootloader. Is there any fastboot push command?
Hello everyone,
I'm actually in front of a big problem. I try this night to upgrade from FRD-L09C432B120 to FRD-L09C432B316. Since I try it, my phone stay on a Warning screen and i can't do anything. (Just try to shut down by a long press on power button and it make a reboot and it's the same for every key combination).
I can't go in Recovery or eRecovery. The only things that works is the fastboot mode. I try to flash the stock firmware after an extract of "UPDATE.APP" but the system image give me an error. I also try to put UPDATE.APP on the SD Card but I can't access to the update mode (by press vol+ , vol- and power button). I think that i've try all the ideas that i've fund on internet !
I've no more ideas. Do you think that is possible to unbrick it ?
Thanks to your help and your reply.
Flo.B said:
Hello everyone,
I'm actually in front of a big problem. I try this night to upgrade from FRD-L09C432B120 to FRD-L09C432B316. Since I try it, my phone stay on a Warning screen and i can't do anything. (Just try to shut down by a long press on power button and it make a reboot and it's the same for every key combination).
I can't go in Recovery or eRecovery. The only things that works is the fastboot mode. I try to flash the stock firmware after an extract of "UPDATE.APP" but the system image give me an error. I also try to put UPDATE.APP on the SD Card but I can't access to the update mode (by press vol+ , vol- and power button). I think that i've try all the ideas that i've fund on internet !
I've no more ideas. Do you think that is possible to unbrick it ?
Thanks to your help and your reply.
Click to expand...
Click to collapse
But please confirm , was the update from b120 to b316 successfull?
Sent from my KIW-L22 using Tapatalk
gopinaidu77 said:
But please confirm , was the update from b120 to b316 successfull?
Click to expand...
Click to collapse
I think it failed because the warning screen showed right?
Sent from my honor 5X using XDA Labs
adriansticoid said:
I think it failed because the warning screen showed right?
Click to expand...
Click to collapse
Right that was what I am also thinking bro.
---------- Post added at 01:35 PM ---------- Previous post was at 01:35 PM ----------
adriansticoid said:
I think it failed because the warning screen showed right?
Sent from my honor 5X using XDA Labs
Click to expand...
Click to collapse
So it's a failure . which mean that it is a semi flashed update . which doesn't installed update.app .
Extract update.app from ota and put it in dload folder .later flash it manually using dload method .
He should follow this way to overcome those reboots
Sent from my KIW-L22 using Tapatalk
---------- Post added at 01:36 PM ---------- Previous post was at 01:35 PM ----------
Flo.B said:
Hello everyone,
I'm actually in front of a big problem. I try this night to upgrade from FRD-L09C432B120 to FRD-L09C432B316. Since I try it, my phone stay on a Warning screen and i can't do anything. (Just try to shut down by a long press on power button and it make a reboot and it's the same for every key combination).
I can't go in Recovery or eRecovery. The only things that works is the fastboot mode. I try to flash the stock firmware after an extract of "UPDATE.APP" but the system image give me an error. I also try to put UPDATE.APP on the SD Card but I can't access to the update mode (by press vol+ , vol- and power button). I think that i've try all the ideas that i've fund on internet !
I've no more ideas. Do you think that is possible to unbrick it ?
Thanks to your help and your reply.
Click to expand...
Click to collapse
Consider reading my above post bro.
Sent from my KIW-L22 using Tapatalk
HONOR 8 Bricked
Hello ,
It happened on my FRD-L04, but I think is the same.
Bootloader is unlocked ?
1. Do you have all drivers installed ? OK
2.Do you have STOCK ROM ? OK. If not, use Huawei Firmare Finder to find suitable ROM. Be aware what you choose !!!
3. Unzipp (WinRar) the ROM.
4.Download and install Huawei Update Extractor. Run Huawei Update Extractor . Choose Update.app from the folder you unzipped the ROM.
5. Select cust.img , boot.img , recovery.img and system.img and extract them on a folder.
6.. Install MultiTool by Team (Multi Tool Team). The instalation will make a folder named UNBRICK.
7. Move the files extracted : cust.img , boot.img , recovery.img and system.img on the folder UNBRICK
8. Run MultiTool . Choose option 6 (unbrick) and after that choose option 2 ( if you already have files on folder UNBRICK)
9. Let the tool finish the job.
NOTE : You must have all drivers installed and the phone in FASTBOOT mode ( turn phone OFF - Press VOL- and insert USB cable simultaneously.)
Good luck !
Hi, thanks everyone for your reply.
Unfortunatly, the dload method seems not work. I think that to run this method, i need to press simultaneously vol+, vol- and the power button to run it, right ?
If it's like that, the method doesn't work anymore.
I will try the process given by technoguy09 and I said to you if it's ok !
So, after many try, every method that i try doesn't work.
Even the Unbrick method doesn't work because the system and cust report an error.
For the cust, i have "partition error" and for the system I have the "sparse flash write failure". Can we correct this error ?
Flo.B said:
So, after many try, every method that i try doesn't work.
Even the Unbrick method doesn't work because the system and cust report an error.
For the cust, i have "partition error" and for the system I have the "sparse flash write failure". Can we correct this error ?
Click to expand...
Click to collapse
Was the bootloader unlocked ?
Do u have twrp installed ?
Sent from my KIW-L22 using Tapatalk
---------- Post added at 03:53 PM ---------- Previous post was at 03:53 PM ----------
Flo.B said:
Hi, thanks everyone for your reply.
Unfortunatly, the dload method seems not work. I think that to run this method, i need to press simultaneously vol+, vol- and the power button to run it, right ?
If it's like that, the method doesn't work anymore.
I will try the process given by technoguy09 and I said to you if it's ok !
Click to expand...
Click to collapse
If u have twrp I will make a flashable zip of stock ROM and cust
Sent from my KIW-L22 using Tapatalk
The bootloader is unlock and TWRP was install but now I can't access it. I try to restore stock recovery and it's the same result.
Flo.B said:
The bootloader is unlock and TWRP was install but now I can't access it. I try to restore stock recovery and it's the same result.
Click to expand...
Click to collapse
Can fastboot detect your phone?
Yes, fastboot is detect, I can launch some command (fastboot devices display my phone, flash etc) everything work but flash recovery didn't change anything and flash system response an error (sparse flash write failure).
Flo.B said:
Yes, fastboot is detect, I can launch some command (fastboot devices display my phone, flash etc) everything work but flash recovery didn't change anything and flash system response an error (sparse flash write failure).
Click to expand...
Click to collapse
From what you said, looks like it is reallt bricked. Service center is your friend.
I think too... I hope that there will be no problem with service center because of the phone is unclocked !
I was never had this kind of problem with my previous android phone. I'm really bad ^^
Thanks for all everybody.
Flo.B said:
So, after many try, every method that i try doesn't work.
Even the Unbrick method doesn't work because the system and cust report an error.
For the cust, i have "partition error" and for the system I have the "sparse flash write failure". Can we correct this error ?
Click to expand...
Click to collapse
Try another ROM.
Flo.B said:
I think too... I hope that there will be no problem with service center because of the phone is unclocked !
I was never had this kind of problem with my previous android phone. I'm really bad ^^
Thanks for all everybody.
Click to expand...
Click to collapse
Goodluck with it buddy.
technoguy09 said:
Try another ROM.
Click to expand...
Click to collapse
I try at least 3 ROM download on different website. I don't think that it can change anything.
I had the same problem.
Dont worry, Honor 8 phones are nearly unbrickable.
Take your B120 ROM extract recovery, cust and boot partitions. (use huawei update extractor)
Flash Them via fastboot (adb) then force the dload method via the 3 buttons combo.
I had all the problems you described and restored my phone as new. (even the "sparse flash write failure" error)
Now i'm on EMUI 5 rooted, no problem
---------- Post added at 06:30 PM ---------- Previous post was at 06:25 PM ----------
Please refer this thread as it might help you.
http://forum.xda-developers.com/mate-8/general/fuss-debrick-restore-mate-8-t3457969
Have a little faith in your Honor
Flo.B said:
I try at least 3 ROM download on different website. I don't think that it can change anything.
Click to expand...
Click to collapse
Did you use Huawei Firmare Finder for your model ?
morpheus302 said:
I had the same problem.
Dont worry, Honor 8 phones are nearly unbrickable.
Take your B120 ROM extract recovery, cust and boot partitions. (use huawei update extractor)
Flash Them via fastboot (adb) then force the dload method via the 3 buttons combo.
I had all the problems you described and restored my phone as new. (even the "sparse flash write failure" error)
Now i'm on EMUI 5 rooted, no problem
---------- Post added at 06:30 PM ---------- Previous post was at 06:25 PM ----------
Please refer this thread as it might help you.
http://forum.xda-developers.com/mate-8/general/fuss-debrick-restore-mate-8-t3457969
Have a little faith in your Honor
Click to expand...
Click to collapse
I have extract all this img but the flash of cust won't work too so, the dload method can't be launch. Now, I send my phone to the service center yesterday. Wait and See ^^
technoguy09 said:
Did you use Huawei Firmare Finder for your model ?
Click to expand...
Click to collapse
Yes, I Download 2 ROM on it but same problem on both.
Flo.B said:
I have extract all this img but the flash of cust won't work too so, the dload method can't be launch. Now, I send my phone to the service center yesterday. Wait and See ^^
Yes, I Download 2 ROM on it but same problem on both.
Click to expand...
Click to collapse
Leave it for service centre people .they will take care
Sent from my KIW-L22 using Tapatalk
My leeco le 2 x526 was working fine until i flashed a custom rom on it. After flashing cutom rom it was working fine but then the custom rom update came and i did that after which leeco le 2 starts and then switches off automatically after loading leeco logo. I have clean wiped the phone and installed several different custom rom's but problem still persists.
I have also tried to flash stock rom via QFIL tool with stock rom images for leeco le 2 x526 which clean wipes the phone and installs new recovery and bootloader and stock rom. After which when i started the phone leeco le 2 logo came and then phone shows the basic setup like language selection and then it again switches off and reboots. and keeps rebooting like this.
I had this problem too just flash with fastboot the latest stock system,recovery,boot,cache, and your phone will start
Sent from my iPhone using Tapatalk
AnonDz said:
I had this problem too just flash with fastboot the latest stock system,recovery,boot,cache, and your phone will start
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I too was thinking about doing this but i don't know all the fastboot commands which needs to be execute while flashing leeco le 2. I had done flashing via fastboot on MI3 but i thought leeco le 2 needs to execute different commands for fastboot flashing. So if you can help me with the fastboot commands which i need to execute for fastboot flashing of leeco le 2 x526. It will be much appreciated.
anandsingh2903 said:
I too was thinking about doing this but i don't know all the fastboot commands which needs to be execute while flashing leeco le 2. I had done flashing via fastboot on MI3 but i thought leeco le 2 needs to execute different commands for fastboot flashing. So if you can help me with the fastboot commands which i need to execute for fastboot flashing of leeco le 2 x526. It will be much appreciated.
Click to expand...
Click to collapse
Enter fastboot with vol down i think and
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Fastboot flash cache cache.img
And reboot your phone manually don’t fastboot reboot especially if you unlocked the bootloader
Sent from my iPhone using Tapatalk
AnonDz said:
Enter fastboot with vol down i think and
Fastboot flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash system system.img
Fastboot flash cache cache.img
And reboot your phone manually don’t fastboot reboot especially if you unlocked the bootloader
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Well did this but now my phone is completely bricked. Now it is not even going to recovery mode neither fastboot mode nor EDL mode. Nothing is happing in my phone now just red LED blinking every time i connect my phone to power source.
The battery is low and do you have the correct firmware for sure
anandsingh2903 said:
Well did this but now my phone is completely bricked. Now it is not even going to recovery mode neither fastboot mode nor EDL mode. Nothing is happing in my phone now just red LED blinking every time i connect my phone to power source.
Click to expand...
Click to collapse
Ok now i have managed to reboot my phone by pressing power button really long. but the problem still persist and phone switches off automatically as soon as the basic setup comes on the phone after switching on.
I’ll check if i still have the firmware and send you the link
AnonDz said:
The battery is low and do you have the correct firmware for sure
Click to expand...
Click to collapse
Yes i have the correct firmware for leeco le 2 x526 as sparse india images. Phone is booting now but problem still persist it reboots automatically as soon as it comes on the basic setup after switching on.
Check the battery If not try to download another firmware update
Sent from my iPhone using Tapatalk
AnonDz said:
Did you check the battery
Sent from my iPhone using Tapatalk
---------- Post added at 04:48 PM ---------- Previous post was at 04:48 PM ----------
If not try to download another firmware update
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Yes i checked the battery it is fine as such phone is working in recovery and fastboot and i have also tried updated firmware as marshmallow was the latest updated firmware available for leeco le 2 x526. but it still didn't work
Did you flash the userdata
Sent from my iPhone using Tapatalk
---------- Post added at 04:51 PM ---------- Previous post was at 04:51 PM ----------
Fastboot flash userdata userdata.img
Sent from my iPhone using Tapatalk
AnonDz said:
Did you flash the userdata
Sent from my iPhone using Tapatalk
---------- Post added at 04:51 PM ---------- Previous post was at 04:51 PM ----------
Fastboot flash userdata userdata.img
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Actually there are many files for userdata and system like system_1, system_2 upto system_63 and same for userdata.
Just userdata or userdata1
Sent from my iPhone using Tapatalk
i am having the same problem.
anandsingh2903 said:
Ok now i have managed to reboot my phone by pressing power button really long. but the problem still persist and phone switches off automatically as soon as the basic setup comes on the phone after switching on.
Click to expand...
Click to collapse
bro please help me if you found the solution to the problem. I having the EXACT same problem as you.
if you will be able to help me out of this problem I will buy you a beer.
So after trying to root my device I successfully unlocked my device and installed twrp and magisk through twrp but after trying to reboot into the system, it doesn't. Every time i try to reboot into the system, it just goes into a loading "G" and boots right back into recovery or twrp.
adrianherndez304 said:
So after trying to root my device I successfully unlocked my device and installed twrp and magisk through twrp but after trying to reboot into the system, it doesn't. Every time i try to reboot into the system, it just goes into a loading "G" and boots right back into recovery or twrp.
Click to expand...
Click to collapse
Flash the stock boot.img to both slots. That should get you running again. Then I'd boot twrp then install magisk. I wouldn't try to flash twrp but if you do make sure you flash that before magisk. Then reboot to twrp and flash magisk.
Sent from my [device_name] using XDA-Developers Legacy app
I'm literally in the same situation. Bootloader unlocked but only able to boot to TWRP. Tried running the "flash-all" from the Google stock image but it doesn't run. Now i'm lost and my new phone is not at its best.
Tarush13 said:
I'm literally in the same situation. Bootloader unlocked but only able to boot to TWRP. Tried running the "flash-all" from the Google stock image but it doesn't run. Now i'm lost and my new phone is not at its best.
Click to expand...
Click to collapse
Make sure you've updated your sdk platform tools.
Sent from my [device_name] using XDA-Developers Legacy app
Just re-downloaded from Google, still doesn't run. Also, not getting "no valid slot to boot" when I flash the boot.img file
---------- Post added at 09:59 PM ---------- Previous post was at 09:38 PM ----------
update: got the flash-all file to work, but now the touchscreen does not work when I am trying to set it up. There is no twrp and I cannot do anything except boot to fastboot or stare at the setup screen
Tarush13 said:
Just re-downloaded from Google, still doesn't run. Also, not getting "no valid slot to boot" when I flash the boot.img file
---------- Post added at 09:59 PM ---------- Previous post was at 09:38 PM ----------
update: got the flash-all file to work, but now the touchscreen does not work when I am trying to set it up. There is no twrp and I cannot do anything except boot to fastboot or stare at the setup screen
Click to expand...
Click to collapse
Are using the commands
fastboot flash boot_a boot.img
And
fastboot flash boot_b boot.img
There are two slots you need to flash the image to.
Sent from my [device_name] using XDA-Developers Legacy app
Hi, I got it to boot, but now I cannot use the touchscreen. Any ways to resolve this?
jd1639 said:
Are using the commands
fastboot flash boot_a boot.img
And
fastboot flash boot_b boot.img
There are two slots you need to flash the image to.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Tarush13 said:
Hi, I got it to boot, but now I cannot use the touchscreen. Any ways to resolve this?
Click to expand...
Click to collapse
Is the touch screen issue with twrp or when you boot the device itself? I know some people have had an issue with the touch screen not working in twrp.
Sent from my [device_name] using XDA-Developers Legacy app
Yes, it is when I boot the device. When I try to click on "start" to begin the initial device setup, nothing happens. None of the touch input is being received by the device.
jd1639 said:
Is the touch screen issue with twrp or when you boot the device itself? I know some people have had an issue with the touch screen not working in twrp.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Tarush13 said:
Yes, it is when I boot the device. When I try to click on "start" to begin the initial device setup, nothing happens. None of the touch input is being received by the device.
Click to expand...
Click to collapse
I'm not sure why it's doing that. But, if I was faced with that issue I'd first flash the system.img to both slots. And if that didn't work I'd try flashing the vendor.img.
Sent from my [device_name] using XDA-Developers Legacy app
flashed vendor.img and still cant use the touch screen? Touch input is definitely not being recorded. Any other ideas?
jd1639 said:
I'm not sure why it's doing that. But, if I was faced with that issue I'd first flash the system.img to both slots. And if that didn't work I'd try flashing the vendor.img.
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
---------- Post added at 11:01 PM ---------- Previous post was at 10:54 PM ----------
Just to clarify, I flashed system to both slots and then vendor. Neither seemed to work.
Tarush13 said:
flashed vendor.img and still cant use the touch screen? Touch input is definitely not being recorded. Any other ideas?
Click to expand...
Click to collapse
Tarush13 said:
flashed vendor.img and still cant use the touch screen? Touch input is definitely not being recorded. Any other ideas?
---------- Post added at 11:01 PM ---------- Previous post was at 10:54 PM ----------
Just to clarify, I flashed system to both slots and then vendor. Neither seemed to work.
Click to expand...
Click to collapse
Have you tried a factory reset on the stock recovery?
Sent from my [device_name] using XDA-Developers Legacy app
I can't get to the stock recovery. When I tried to go there from fastboot, I got a "no command" error. Basically all I can do is go to fastboot mode and either reboot to the start screen where the touch input does not work or power off. I also don't see a recovery file in the source image I downloaded from google.
jd1639 said:
Have you tried a factory reset on the stock recovery?
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
Tarush13 said:
I can't get to the stock recovery. When I tried to go there from fastboot, I got a "no command" error. Basically all I can do is go to fastboot mode and either reboot to the start screen where the touch input does not work or power off. I also don't see a recovery file in the source image I downloaded from google.
Click to expand...
Click to collapse
The boot.img contains the stock recovery as well as the kernel. Flash that.
Sent from my [device_name] using XDA-Developers Legacy app
Tarush13 said:
I can't get to the stock recovery. When I tried to go there from fastboot, I got a "no command" error. Basically all I can do is go to fastboot mode and either reboot to the start screen where the touch input does not work or power off. I also don't see a recovery file in the source image I downloaded from google.
Click to expand...
Click to collapse
The no command thing is normal. When you see that screen, push and hold the power button and then, while still holding the power button, press volume up once. That will get you into recovery.
boot.img flashed, factory reset with stock recovery, still can't use the touch screen. This is beyond anything I've encountered in rooting. No clue why this is happening.