READ FAQ, Q&A and Know Issues before downloading and using this packs
TESTED and WORKING ODIN FLASHABLE BUNDLES for Samsung Galaxy Y
Preface:
Since Galaxy Y has been released, there are several firmware files available from different sources, eg. sammobile and etc... But most of these firmware packages (which are original unmodified Kies files) are useless for us, because Odin is not able to flash these files.
Therefore I started to analyze the Kies pack, and finally developed a method to convert the Kies files to Odin-able package.
The full conversion process of one pack took me about 2-3 hours including download, analyze, rebuild, test, upload, and finally post. So please keep in mind, I'm not just a redistributor of the firmware files, I've real work in it. Your thanks (button) and donations are very welcome, if my work helps you anyway.
In case Your work based in my rebuilt bundles, crediting me is expected. Stealing my work is unforgivable.
Disclaimer: I'm not responsible for any damage done to your phone.
Use the following materials at your own risk only!
Read post #2 and #3 for more info!
Click to expand...
Click to collapse
Not all packs are listed here, If you're looking for a specific pack, please check it HERE
So here are the bundles:
(format: PHONE / CSC / MODEM versions)
EUROPE
S5360_XXKK6_OXXKK2_XXKK5
European multilanguage build.
based on: S5360XXKK6_S5360OXXKK2_RST_S5360XXKK5_HOME.tar.md5
ro.build.date=Wed Nov 23 21:52:07 KST 2011
ro.build.version.release=2.3.6
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
Included CSCs: (Default is XEU)
ATO AUT COS CPW CYO CYV EIR EUR FOP ITV MOO PAN PHE SUW TPH XEF XEH XEO XEU XEZ XSK
This build does not contains any provider specific bloatware.
S5360_XXKK6_VDHKK1_XXKK5
Vodafone Hungary branded
based on: S5360XXKK6_S5360VDHKK1_S5360XXKK5_HOME.tar.md5
ro.build.date=Wed Nov 23 21:52:07 KST 2011
Supported region: VDH only
S5360_XXKL3_OXXKL1_XXKL3http://hotfile.com/dl/145565779/4bff8c6/S5360_XXKL3_OXXKL1_XXKL3_by_Doky.zip.html
European multilanguage build.
based on: S5360XXKL3_S5360OXXKL1_RST_S5360XXKL3_HOME.tar.md5
ro.build.date=Wed Dec 14 17:16:14 KST 2011
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
Included CSCs: (Default is XEU)
ATO AUT COS CPW CYO CYV EIR EUR FOP ITV MOO PAN PHE SUW TPH XEF XEH XEO XEU XEZ XSK
After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
This build does not contais any provider specific bloatware.
CSC only:S5360_OXFKL3
This is an OXF CSC file only!!!
included regions:
CNX COA ERO GBL MOT MSR MTL PMN SIM TMT TOP TRA
The pack includes region specific settings, and Swype keyboard for the following languages:
EnglishUK, EnglishUS, Bulgarian, Croatian, Danish, Dutch, Finnish, French, German, Korean, Norwegian, Romanian, SerbianLA, Slovenian, Swedish
You may use other parts of S5360_XXKL3_OXXKL1_XXKL3 from above!
S5360_XXLA2_OXXLA2_XXLA2
European multilanguage build.
based on: S5360XXLA2_S5360OXXLA2_RST_S5360XXLA2_HOME.tar.md5
ro.build.date=Wed Jan 11 13:58:09 KST 2012
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
Included CSCs: (Default is XEU)
ATO AUT COS CPW CYO CYV EIR EUR FOP ITV MOO PAN PHE SUW TPH XEF XEH XEO XEU XEZ XSK
After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
This build does not contains any provider specific bloatware.
S5360_XXLA4_DBTKK1_XXLA4
European multilanguage build.
based on: S5360XXLA4_S5360DBTKK1_S5360XXLA4_HOME.tar.md5
ro.build.date=Wed Jan 25 14:24:48 CET 2012
ro.build.version.release=2.3.6
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
Included CSCs: DBT only (Supported networks: T-Mobile D, Vodafone.de, E-Plus, o2 - de)
This build does not contains any provider specific bloatware.
S5360_XXLC1_ATOLB1_XXLC1
European multilanguage build.
based on: S5360XXLC1_S5360ATOLB1_S5360XXLC1_HOME.tar.md5
ro.build.date=Tue Mar 6 17:24:32 KST 2012
ro.build.version.release=2.3.6
ro.build.changelist=1012072
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
Included CSCs: ATO only
Supportd network setups:
Austria: A1, bob, T-Mobile A, Orange AT, tele.ring, 3, yesss!, aon
This build contains some provider specific bloatware.
S5360_XXLD5_OXXLD5_XXLD5
European multilanguage build.
Wipe package
based on: S5360XXLD5_S5360OXXLD5_RST_S5360XXLD5_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Wed Apr 25 16:30:22 KST 2012
ro.build.changelist=1103396
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
Included CSCs: (Default is AUT, XEU missing!)
AUT CMF COS CYO CYV EUR FOP ITV PAN PHE SMO SUW TPH XEF XEH XEO XEZ XSK
After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
This build does not contains any provider specific bloatware.
S5360_XXLE1_OXXLE1_XXLE1
European multilanguage build.
Wipe package
Based on: S5360XXLE1_S5360OXXLE1_RST_S5360XXLE1_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Thu May 3 14:19:52 KST 2012
ro.build.changelist=1111664
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
Included CSCs: (Default is AUT, XEU missing!)
AUT CMF COS CYO CYV EUR FOP ITV PAN PHE SMO SUW TPH XEF XEH XEO XEZ XSK
After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
This build does not contains any provider specific bloatware.
CSC Only: OXF CSC for XXLE1 (S5360)
Included carrier setup for countries: Bosnia, Bulgaria, Croatia, Montenegro, Romania, Serbia, Slovenia
And Swype keyboard for : EnglishUK, EnglishUS, Bulgarian, Croatian, Danish, Dutch, Finnish, French, German, Korean, Norwegian, Romanian, SerbianLA, Slovenian, Swedish
Use conjunction with XXLE1_OXX, but replace the CSC file!
S5360_XXLF1_OXXLF1_XXLF1
European multilanguage build.
Wipe package
Based on: S5360XXLF1_S5360OXXLF1_RST_S5360XXLF1_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Thu Jun 7 18:04:19 KST 2012
ro.build.changelist=1142401
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
Included CSCs: (Default is AUT, XEU missing!)
AUT CMF COS CYO CYV EUR FOP ITV PAN PHE SMO SUW TPH XEF XEH XEO XEZ XSK
After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
This build does not contains any provider specific bloatware.
S5360_XXLF3_OXXLF3_XXLF3
European multilanguage build.
Wipe package
Based on: S5360XXLF3_S5360OXXLF3_RST_S5360XXLF3_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Wed Jun 27 10:45:25 KST 2012
ro.build.changelist=1157453
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)
Included CSCs: (Default is AUT. XEU missing!)
AUT CMF COS CYO CYV EUR FOP ITV PAN PHE SMO SUW TPH XEF XEH XEO XEZ XSK
After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
This build does not contains any provider specific bloatware.
S5360_XXLH2_OXXLH2_XXLH2
European multilanguage build.
Wipe package
Based on: S5360XXLH2_S5360OXXLH2_RST_S5360XXLH2_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Thu Aug 30 15:16:00 KST 2012
ro.build.changelist=1190009
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)*
Included CSCs: (Default is AUT)
AUT CMF COS CYO CYV EUR ORS PAN SMO SUW TPH TSH XEH XEO XEZ XSK
After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
This build does not contains any provider specific bloatware.
S5360_XXLK1_OXFLK1_XXLH2
European multilanguage build.
Wipe package
Based on: S5360XXLK1_S5360OXFLK1_S5360XXLH2_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Wed Nov 14 20:05:50 KST 2012
Supported languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr)*
Included CSCs:
ALB CNX COA ERO GBL MOT MSR PMN SIM TMT TOP TRA TWO
After the flash, set your country/provider in dialer *#272*[yourIMEI]# (-> It will wipe your data, and rebrand the phone to specific country/carrier)
This build does not contains any provider specific bloatware, but contains localized Swype keyboard
ASIA / PACIFIC
S5360_DDLA3_ODDLA2_DDLA2 (revision 1)
corrected CSC if you have the zero release, download this one only
Bangladesh, India, Nepal, Sri Lanka
based on: S5360DDLA3_S5360ODDLA2_S5360DDLA2_HOME.tar.md5
ro.build.date=Wed Jan 18 17:46:48 KST 2012
Included CSCs:
ETR INS INU NPL SLK TML
Included languages:
DD = en(hi)
This build does not contain provider specific bloatware.
(some SD card issues reported with this build -> I suggest to format your SD to FAT32)
S5360_DDLC2_ODDLA2_DDLC2
Bangladesh, India, Nepal, Sri Lanka
based on: S5360DDLC2_S5360ODDLA2_S5360DDLC2_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Tue Mar 20 12:52:45 KST 2012
Included CSCs:
ETR INS INU NPL SLK TML
Included languages:
DD = en(hi)
This build does not contain provider specific bloatware.
S5360_DDLE1_ODDLD1_DDLE1
Bangladesh, India, Nepal, Sri Lanka
WIPE package
Based on: S5360DDLE1_S5360ODDLD1_S5360DDLE1_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Fri May 4 19:14:23 KST 2012
Included CSCs:
ETR INS INU NPL SLK TML
Included languages:
DD = en(hi)
This build does not contain provider specific bloatware.
S5360_DDLF2_ODDLF1_DDLF1
Bangladesh, India, Nepal, Sri Lanka
WIPE package
Based on: S5360DDLF2_S5360ODDLF1_S5360DDLF1_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Fri Jun 22 21:18:27 KST 2012
Included CSCs:
ETR INS INU NPL SLK TML
Included languages:
DD = en(hi)
This build does not contain provider specific bloatware.
S5360_DDLK2_ODDLK1_DDLK1
Bangladesh, India, Nepal, Sri Lanka
WIPE package
Based on: S5360DDLK2_S5360ODDLK1_S5360DDLK1_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Fri Nov 9 13:26:36 KST 2012
Included CSCs:
ETR INS INU NPL SLK TML
Included languages:
DD = en(hi)
This build does not contain provider specific bloatware.
S5360_DXKL2_OLBKL2_DXKL2
Indonesia, Malaysia, Philippines, Singapore, Vietnam
based on: S5360DXKL2_S5360OLBKL2_S5360DXKL2_HOME.tar.md5
ro.build.date=Thu Dec 15 19:22:01 KST 2011
Included CSCs:
GLB MM1 SIN SMA STH THL XEV XME XSE XSP XTC XTE
Included languages:
DX = en,id,ms,th,vi,zh(ta)
This build contains some provider specific bloatware, depending on your CSC selection.
S5360_DXLA1_OLBLA1_DXLA1
Indonesia, Malaysia, Philippines, Singapore, Vietnam
based on: S5360DXLA1_S5360OLBLA1_S5360DXLA1_HOME.tar.md5
ro.build.date=Thu Jan 12 20:25:01 KST 2012
Included CSCs:
GLB MM1 SIN SMA STH THL XEV XME XSE XSP XTC XTE
Included languages:
DX = en,id,ms,th,vi,zh(ta)
This build contains some provider specific bloatware, depending on your CSC selection.
S5360_DXLB1_XSELB1_DXLB1
Indonesia, Malaysia, Philippines, Singapore, Vietnam
based on: S5360DXLB1_S5360XSELB1_S5360DXLB1_HOME.tar.md5
ro.build.date=Fri Feb 3 13:52:03 KST 2012
ro.build.version.release=2.3.6
Included CSCs:
XSE only (Use DXLA1's CSC for rebranding)
Included languages:
DX = en,id,ms,th,vi,zh(ta)
This build contains some provider specific bloatware, depending on your CSC selection.
S5360_DXLC1_OLBLA1_DXLC1
Indonesia, Malaysia, Philippines, Singapore, Vietnam
based on: S5360DXLC1_S5360OLBLA1_S5360DXLC1_HOME.tar.md5
ro.build.date=Wed Mar 7 09:53:45 KST 2012
ro.build.version.release=2.3.6
Included CSCs:
GLB MM1 SIN SMA STH THL XEV XME XSE XSP XTC
Included languages:
DX = en,id,ms,th,vi,zh(ta)
This build contains some provider specific bloatware, depending on your CSC selection.
S5360_DXLE1_OLBLD2_DXLE1
Indonesia, Malaysia, Philippines, Singapore, Vietnam
Wipe package
Based on: S5360DXLE1_S5360XSELB1_S5360DXLE1_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Fri May 4 19:35:02 KST 2012
Included CSCs:
GLB MM1 SIN SMA STH THL XEV XME XSE XSP XTC
Included languages:
DX = en,id,ms,th,vi,zh(ta)
This build contains some provider specific bloatware, depending on your CSC selection.
S5360_DXLF2_OLBLG1_DXLF1
Indonesia, Malaysia, Philippines, Singapore, Vietnam
Wipe package
Based on: S5360DXLF2_S5360OLBLG1_S5360DXLF1_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Fri Jun 22 21:05:16 KST 2012
Included CSCs:
GLB MM1 SIN SMA STH THL XEV XME XSE XSP XTC, XTE
Included languages:
DX = en,id,ms,th,vi,zh(ta)
This build contains some provider specific bloatware, depending on your CSC selection.
S5360_DXLJ1_OLBLG1_DXLI1
Indonesia, Malaysia, Philippines, Singapore, Vietnam
Wipe package
Based on: S5360DXLJ1_S5360OLBLG1_S5360DXLI1_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Mon Oct 8 09:58:56 KST 2012
Included CSCs:
GLB MM1 SIN SMA STH THL XEV XME XSE XSP XTC, XTE
Included languages:
DX = en,id,ms,th,vi,zh(ta)
This build contains some provider specific bloatware, depending on your CSC selection.
(SOUTH) AMERICA
S5360B_UTKI3_ZTAKI3_UTKI3
Brazil
based on: S5360BUTKI3_S5360ZTAKI3_S5360BUTKI3_HOME.tar.md5
ro.build.date=Thu Sep 22 13:27:09 KST 2011
ro.build.version.release=2.3.5
Included CSCs:
ZTA only (Claro)
Included languages:
UT = en,es,pt
This build contains some provider specific bloatware.
S5360B_UTKJ2_ZTOKJ1_UTKJ1
Brazil
based on: S5360BUTKJ2_S5360ZTOKJ1_S5360BUTKJ1_HOME.tar.md5
ro.build.date=Fri Oct 7 23:45:59 KST 2011
ro.build.version.release=2.3.5
Included CSCs:
ZTO (Open Brasil)
supported carriers: Oi, TIM, Claro, VIVO, Brasil Telecom, Amazônia Celular, Sercomtel, CTBC, AEIOU
Included languages:
UT = en,es,pt
This build contains some provider specific bloatware.
S5360B_UTKL2_ZTOKL2_UTKL2
Brazil
based on: S5360BUTKL2_S5360BZTOKL2_S5360BUTKL2_HOME.tar.md5
ro.build.date=Wed Dec 21 20:13:51 KST 2011
ro.build.version.release=2.3.6
Included CSCs:
ZTO (Open Brasil)
supported carriers: Oi, TIM, Claro, VIVO, Brasil Telecom, Amazônia Celular, Sercomtel, CTBC, AEIOU
Included languages:
UT = en,es,pt
This build contains some provider specific bloatware.
S5360B_UTLC2_ZTOLC_UTLC
Brazil
based on:
ro.build.version.release=2.3.6
ro.build.date=Fri Mar 16 01:26:41 KST 2012
Included CSCs:
ZTO (Open Brasil)
supported carriers: Oi, TIM, Claro, VIVO, Brasil Telecom, Amazônia Celular, Sercomtel, CTBC, AEIOU
Included languages:
UT = en,es,pt
This build contains some provider specific bloatware.
S5360B_UTLI1_ZTMLC1_UTLI1
Brazil
Based on: S5360BUTLI1_S5360BZTMLC1_S5360BUTLI1_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=2012. 09. 04. 20:26:11 KST
ro.build.changelist=1191088
WIPE package - will erase your user data!!!
CSC: ZTM Only (TIM)
Included languages:
UT = en,es,pt
This build contains some provider specific bloatware.
S5360L_UHKL1_CHLKL1_UHKL1
Chile
based on: S5360LUHKL1_S5360CHLKL1_S5360LUHKL1_HOME.tar.md5
ro.build.date=Thu Dec 1 15:02:14 KST 2011
ro.build.version.release=2.3.6
Included CSCs:
CLH
Included languages:
UH = en,es
This build contains some provider specific bloatware.
(please note, not tested yet. Pls report if it's OK or not!)
S5360L_UHKI6_UUBKI4_UHKI6
Trinidad and Tobago
based on: S5360LUHKI6_S5360UUBKI4_S5360LUHKI6_HOME.tar.md5
ro.build.date=Wed Sep 21 18:13:38 KST 2011
ro.build.version.release=2.3.5
Included CSCs:
TDR TTT VNO
Included languages:
UH = en,es
This build contains some provider specific bloatware.
(please note, not tested yet. Pls report if it's OK or not!)
MIDDLE EAST and AFRICA
S5360_JPLA1_OJPLA1_XXLA2
Arabic release
based on: S5360JPLA1_S5360OJPLA1_S5360XXLA2_HOME.tar.md5
ro.build.date=Sat Jan 14 06:54:01 KST 2012
ro.build.version.release=2.3.6
Included CSCs:
ABS AFG BTC EGY JED KSA MAT MED MID MMC MRT MWD OTU PAK THR TMC TUN WAN XSG XSS
Included languages:
JP = ar,en,fr(fa,ur)
This build contains some provider specific bloatware.
S5360JPLC1/S5360OJPLC1/S5360XXLC1
Arabic release
based on: S5360JPLC1_S5360OJPLC1_S5360XXLC1_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Fri Mar 16 15:45:06 KST 2012
Included CSCs:
ABS AFG BTC EGY JED KSA MAT MED MID MMC MRT MWD OTU PAK THR TMC TUN WAN XSG XSS
Included languages:
JP = ar,en,fr(fa,ur)
This build contains some provider specific bloatware.
S5360_JPLG1_OJPLG1_XXLF3
Arabic release
based on: S5360JPLG1_S5360OJPLG1_S5360XXLF3_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Tue Jul 10 11:45:03 KST 2012
Included CSCs:
ABS AFG BTC EGY JED KSA MAT MED MID MMC MRT MWD OTU PAK THR TMC TUN WAN XSG XSS
Included languages:
JP = ar,en,fr(fa,ur)
This build contains some provider specific bloatware.
S5360_XXKL1_OJCKI1_XXKL1
South Africa
based on: S5360XXLC1_S5360ATOLB1_S5360XXLC1_HOME.tar.md5
ro.build.version.release=2.3.6
ro.build.date=Thu Dec 8 15:06:21 KST 2011
Included CSCs:
XFA XFC XFE XFM XFV
Included languages:
XX = de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr )
This build contains some provider specific bloatware.
Depending on your interest (and my spare time), I'll build additional versions...
In case You have a specific request, please post your full version info from dialer *#1234# (if you're on your original ROM) and PCODE from *2767*4387264636# !
My recommendation to record above info when you're on your original ROM, before experimenting any other versions!
Please read post #2 and #3 for flashing guide and FAQ!
<<< Please use the thanks button if you find it useful! >>>
Odin flash guide...
Before You proceed: take a notice, and record your original (in case you are on original stock fw) firmware levels by typing *#1234# and PCODE by *2767*4387264636#. This might be helpful if you want to go back to your original in-box firmware.
Check WHITE-CZ's video tutorial on the boot mode selection, and Odin flash!
- download the required firmware bundle (one of the repacked from the #1 post above)
- install Kies, or Samsung driver pack
- unzip the package, You'll get 3 *.tar (or tar.md5) files
- download Odin3 1.84 or 1.85 (click here)
- stop Kies
- stop all active ADB sessions
- start odin
- do backup of your data and apps
- charge your SGY at least 75%
- remove SGY from USB or charger
- start the device in Download mode
- power off Your SGY
- wait 30 sec
- Press Vol Down, Home, and Power at the same time
- When (about 5 sec) Warning screen appears, release Volume Down and Power, then (a bit later) Home
- press Vol Up (You'll get Odin mode screen)
- Browse the 3 tar files to odin PDA=PDA_xxxx.tar, PHONE=MODEM_ or PHONE_xxxxx.tar, CSC=CSC_xxxxx.tar
- no PIT and/or BOOT files required - leave it empty!
- leave all other fields and checkboxes default!
- connect your phone, You must see yellow 0:[COMxx] in the first ID:COM and "Added" in the message box
- Start flashing by the START button.
- flashing will start immediately, see the progress in the message box, and progress bar on the phone
- Wait 1-3 minutes, until green PASS! in the upper left
- SGY will reboot, leave it as is for 2-5 minutes until startup finishes
- if it stuck (eg boot anim loop) then: - Start the phone in Recovery mode
- remove battery
- resinsert battery, wait 30 sec
- press Vol Up, Home, Power at the same time
- when Galaxy Y logo appears, release the Power button
- when Recovery menu appears, release the Home button first, then finally Vol Up
- select wipe data/factory reset (Vol UP/Down + Home)
- select reboot system nowWhen Android boots up, it's highly recommended to set your CSC via the dialer *#272*_your_imei_# (to see IMEI type *#06# in dialer) -> (it will erase all your data on the phone, but not the SD card)
Known Issues
- DDLA3 :minor CSC file corruption. may cause boot loop after flashing via Odin -> CSC corrected -> full pack replaced
- DXLA1 : 1 report (of 150+ download) on unrecoverable boot loop after flashing - reason unknown
- as of 10th of April I made some changes in the firmware pack: files are md5 secured and update packs are wipe versions. It means you suffer "factory reset" by flashing new firmware, but this way there is minimal occurrence of boot loop after a flash.
FAQ
F.A.Q.
Q: I'm requesting x or y provider/country's ROM version to restore my phone's original state
A: In case You have a specific request, please post your PCODE from *2767*4387264636# and full version info from dialer *#1234# of your original ROM version. If you don't have this (already left original ROM) , then ask someone who has the same device with same provider/country! Check availability on http://fus.nanzen.se If you're smart enough, you can download the FUS file, then convert it by SplitFUS2.
If converting is difficult to you, then post it here or PM me.
Withoout PCODE and full HIDSWVER I can't help you!
plan B for finding original HIDSWVER
If you have Kies installed, and connected your phone with the original firmware, you have good chance to find it in Windows registry:
Start regedit.exe and check under the key HKEY_CURRENT_USER\Software\Samsung\Kies\DeviceDB...
there should be some numbered sub-keys, eg 1, 2, 3, etc...
Under the numbered keys, look for "HIDSWVER" It has the following format:
I9100XWKI4/I9100OXXKI2/I9100XXKI1/I9100XWKI4
Notice the ProductCode key at the same page, it's useful to search for FUS packages at http://fus.nanzen.se
Q: Flashing any firmware to my phone will erase the network lock?
A: NO. The network (or SIM) lock still remain active. By flashing firmware you can't deactivate the lock. It's stored elsewhere.
Q: Flashing an operator specific firmware will restrict my open phone to that operator's network?
A: NO. Your phone still remain open for any SIM. Operator specific builds usually containing "only" bloatwares, wallpapers and/or browser settings, etc...
Q: Is it possible to update the PDA or MODEM only
A: Yes, You can update any one component independently if you have a good reason for, but remember: recommended to have consistent components
Q: Where is the bootloader tar and pit file?
A: those are not used for a Kies like update. You can find totoro*.pit and bootloader in other S5360 firmware bundles, and use if you really need it, but not necessarily needed for flashing
Q: Do I need to tick repartition?
A: NO! Leave all check-boxes as default!
Q: Really??? Do not tick repartition?
A: REALLY, I told You! Leave it unticked!!! ...And leave bootloader empty as well! COPY THAT?!?!?!
Q: Will Odin increase my custom bin counter flashing these packs?
A: No. Custom bin counter increased in case, when you flash non-stock firmware. Bundles provided here are all stock files.
Q: Wipe vs Non wipe packs?
A: Wipe pack has been build including an empty userdata partition, that way flashing a wipe pack will erase your user data.
Usually wipe packs has less issues after flashing, that way as of 10th of April I've decided to post here wipe packs only.
Q: I've got no issues in the past with non wipe packs. I want to flash new firmwares by having my data untouched. Can I modify wipe pack to non wipe pack?
A: Yes: Rename PDA*.tar.md5 to *.tar, then remove the userdata.img file! Don't forget to backup, because non wipe packs sometimes leads you to boot loop, and the solution is wipe data/cache.
Q: Which CSC to chose?
A:
OXX:
ATO Austria
AUT Switzerland
COS Greece
CPW UK & IRE
CYO Greece
EIR Ireland
EUR Greece
FOP SPAIN
ITV ITALY
MOO AUSTRIA
PAN Hungary
PHE SPAIN
TPH portugal
XEF France
XEH Hungary
XEO Poland
XEU UK & IRE
XEZ Czech Republic
XSK Slovakia
OXF:
ALB Albania
CNX Romania
COA Romania
ERO Bosnia
GBL Bulgaria
MOT Slovenia
MSR Serbia
PMN Montenegro
SIM Slovenia
TMT Montenegro
TOP Serbia
TRA Croatia
TWO Croatia
OXE:
ALO Ukraine
FTD Ukraine
MBC Mongolia
MSG Ukraine
SEK Ukraine
SER Russia
SKZ Kazakhstan
VHC Ukraine
ODD:
ETR Bangladesh
INS India
INU India
NPL Nepal
SLK Sri Lanka
TML Bangladesh
OLB:
GLB PHILIPPINES
MM1 SINGAPORE
SIN SINGAPORE
SMA PHILIPPINES
STH SINGAPORE
THL THAILAND
XEV VIETNAM
XME MALAYSIA
XSE INDONESIA
XSP SINGAPORE
XTC PHILIPPINES
XTE PHILIPPINES
OJP:
ABS TUNISIA
AFG Afghanistan
BTC Libya
EGY Egypt
JED KSA
KSA KSA
MAT MOROCCO
MED MOROCCO
MID IRAQ
MMC Libya
MRT Mauritania
MWD MOROCCO
PAK PAKISTAN
THR IRAN
TMC Algeria
TUN TUNISIA
WAN MOROCCO
XSG UAE
XSS UAE
OJV:
AFR Kenya
ECT Nigeria
FWD MOROCCO
KEN Kenya
TUR TURKEY
In case not found your CSC, look here
thanks buddy!you are
THE BEST!!!!!!!
dxkl2 stock rom please
check Fus / spoof Fw http://fus.nanzen.se
use check Fus & spoof Fw ( <--- click) to find out about latest firmware from Samsung, see screens attached.
http://fus.nanzen.se
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Doky73 said:
XXKL3_OXXKL1_XXKL3European multilanguage build.
Supported regions: (Default is XEU)
ATO AUT COS CPW CYO CYV EIR EUR FOP ITV MOO PAN PHE SUW TPH
XEF XEH XEO XEU XEZ XSK
After the flash, set your region in dialer
*#272*[yourIMEI]#
(-> It will wipe your personal settings)
Click to expand...
Click to collapse
*#272*[your IMEI]# will wipe all data and "rebrand" the phone to some specific vendor. it will install wallpaper with company logo, company APN and stuff like that.
I wonder, whether
EIR = Ireland
AUT = Austria
XSK = swedish
XEF = french ?
ATO AUT COS CPW CYO CYV EIR EUR FOP ITV MOO PAN PHE SUW TPH XEF XEH XEO XEU XEZ XSK
Austria
Czech Republic
France
Greece
Ireland
Italy
Portugal
Slovakia
SPAIN
Switzerland
UK & IRE
---------- Post added at 09:55 AM ---------- Previous post was at 09:40 AM ----------
Doky73 said:
finally, I developed the method to build an "Odin-ready package" from any other Kies build.
Click to expand...
Click to collapse
wow! quite an achievement! excellent job, man !
Too bad, that Kies only flashes the SGY a single time, until the next update. so one can't research Kies a lot during flash updates. And there seems to be no way to force the SGY into a pristine state, so Kies would update it again.
xomanuel said:
dxkl2 stock rom please
Click to expand...
Click to collapse
could you be more specific please?
I found at least 2 packs with DXKL2: for Indonesian and Philippines
please specify:
Phone model: eg S5360XSE
build for PDA, CSC, Modem, eg : DXKL2, OLBKL2, DXKL2
again, great job, Doky !
mai77 said:
*#272*[your IMEI]# will wipe all data and "rebrand" the phone to some specific vendor. it will install wallpaper with company logo, company APN and stuff like that.
Click to expand...
Click to collapse
Yes, you're right, ... but...
There are country specific CSC codes, and there are provider specific CSCs as well .
For example, my country code is XEH, which CSC contains all the providers in the country. (I suppose) these country wide CSC's does not contains provider specific bloatwares, only basic parameters like voicemail number, APN, browser homepage etc... "Rebranding" requires provider specific CSC like PAN or VDH in my case.
mai77 said:
I wonder, whether
EIR = Ireland
AUT = Austria
XSK = swedish
XEF = french ?
Click to expand...
Click to collapse
XEF is a french county specific CSC, contains the setup for the following carriers:
Orange F
F SFR
SFR RU
BOUYGTEL
NRJ (SFR)
Virgin
Tele2
Auchan
Carrefour
NRJ (ORANGE)
Orange (340 01)
Orange (647 00)
Simplicime
Leclerc
Digicel
CORIOLIS
CORIOLIS
Keyyo Mobile
La Poste Mobile
LTI telecom
Darty Mobile
---edit----
furthermore
EIR = Ireland: eMobile
AUT = Switzerland: Sunrise, Swisscom, Orange CH
XSK = Slovakia: Orange, T-Mobile SK, O2 - SK
---edit----
There are several sources of lettercodes webwide, If you're confsed, search for it!
Europe Regional Firmware Codes:
XA - Austria, France, Germany, Italy, Netherlands, Switzerland, United Kingdom
XB - Denmark, Norway, Sweden
XC - Portugal, Spain
XD - Croatia, Czech, Hungary, Slovakia
XE - Bulgaria, Estonia, Kazakhstan, Latvia, Lithuania, Russia, Ukraine, United States
XF - Bulgaria, Croatia, Romania
XG - among others Germany
XP - UK, France, Italy, Spain, Netherlands, Poland, Portuguese, Turkey
XX - Austria, Belgium, France, Netherlands, Poland, Germany, Hungary, Italy, Spain, United Kingdom
XW - Austria, Belgium, France, Netherlands, Poland, Germany, Hungary, Italy, Spain, United Kingdom
mai77 said:
Europe Regional Firmware Codes:
XA - Austria, France, Germany, Italy, Netherlands, Switzerland, United Kingdom
...
XW - Austria, Belgium, France, Netherlands, Poland, Germany, Hungary, Italy, Spain, United Kingdom
Click to expand...
Click to collapse
Well, You're talking about firmware region codes, I'm talking about CSC's.
Regional code determines, which languages supported by the firmware build itself.
CSC determines, which provider's base settings are predefined (and provider specific other things included)
But I'm affraid, we're going offtopic... If you have any specific (language or provider) request, please let me know, and I'll build it for You!
(I've corrected "region" to "brand" in the OP ;-)
S5360XXKL3_OXXKL1_XXKL3_by_Doky73.zip
I tested S5360XXKL3_OXXKL1_XXKL3_by_Doky73.zip
used stock recov menu to wipe data + cache.
looks pretty good. no problems so far.
Opening post has been updated with DXKL2
Doky73 said:
could you be more specific please?
I found at least 2 packs with DXKL2: for Indonesian and Philippines
please specify:
Phone model: eg S5360XSE
build for PDA, CSC, Modem, eg : DXKL2, OLBKL2, DXKL2
Click to expand...
Click to collapse
s5360dxkl2 Philippine firmware
PDA: S5360DXKL2
Phone: S5360DXKL2
CSC: S5360OLBKL2
EDIT:
Thanks will try that later
Tell me what does rebranding do
Sent from my GT-S5360
bricking the SGY ?
Doky73 said:
To flash the given package I've used Odin3 v1.85. You should try other Odin versions, please post the result!
Don't need to use .pit file, and do not tick the repartion!
Click to expand...
Click to collapse
Odin v1.85 and v1.84 do work with our SGYs.
my best guess is, other versions of ODIN do not work. (I tried 2.42 or so)
what would be the result of repartitioning and including the .pit file ?
would it brick the SGY ? the readme file speaks of possible missing files.
---------- Post added at 08:47 AM ---------- Previous post was at 08:43 AM ----------
drichieboi said:
Tell me what does rebranding do
Click to expand...
Click to collapse
rebranding typically adds useless bloatware, that we need to get rid of. (such as wallpapers with stupid company logos and crap)
Oh why is it when im updating my default wallpaper is not the default wallpaper of sgy its fcking sun cellular wallpaper
Sent from my GT-S5360
mai77 said:
Odin v1.85 and v1.84 do work with our SGYs.
rebranding typically adds useless bloatware, that we need to get rid of. (such as wallpapers with stupid company logos and crap)
Click to expand...
Click to collapse
The main purpose of rebranding, to let providers set up automatically some carrier specific parameters such as voicemail, SMS center phone numbers, 3G Access Point Names (APNs) etc...
While Android is much more customizable, rebranding likely used by providers, to add their own wallpapers, icons, applications etc...
So rebranding may be skipped, but in case you might need to set up some carrier specific parameters manually.
stats
Short stats:
146 downloads so far, 14 thanks, zero complaints
any other request for build?
Doky73 said:
Short stats:
146 downloads so far, 14 thanks, zero complaints
any other request for build?
Click to expand...
Click to collapse
Hmmm. How bout DXLA1? Thanks in advance
New firmware for Samsung s10e SM-G970F on https://www.sammobile.com/firmwares/...U1ASE5/271879/
Model SM-G970F
Model name Galaxy S10e
Country: Switzerland AUT ----> OXM
Version Android 9
Changelist 16003457
Build date Sat, 18 May 2019 04:22:17 +0000
Security Patch Level 2019-05-01
Product code AUT
PDA G970FXXU1ASE5
CSC G970FOXM1ASE5
This package contains the HOME_CSC of OXM Multi-CSC, which include the following CSC's: ACR AFG AFR ARO ATO AUT BGL BNG BRI BTC BTU CAC CAM CEL CHO COO DBT DKR ECT EGY EON ETL EUR GLB ILO INS ITV KSA LAO LUX LYS MID MM1 MWD MYM NEE NPL ORX PAK PCL PHE PHN PTR ROM SEB SEE SEK SER SIN SKZ SLK SMA STH THL THR TMC TPA TPH TTT TUN TUR WTL XEF XEH XEO XEU XFA XFE XME XSG XSP XTC XXV ZTO
Also downloadable with SamFirm v3.0.6
Flashing with Odin
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.13.3
3. Extract Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.13.3
5. Reboot Phone in Download Mode (press and hold Bixby + Power + Volume Down buttons)
6. Connect phone and wait until you get a blue sign in Odin
7. Add the firmware files to their designated slots
8. Make sure re-partition is NOT ticked
9. Click the start button, sit back and wait few minutes
New firmware:
PDA: G970FXXU1ASE5
CSC: G970FOXM1ASE5
Changelist 16003457
Build date Sat, 18 May 2019 04:22:17 +0000
Security Patch Level 2019-05-01
Germany ----> DBT
Russia ---> SER
Where could we find the real changes, not only the 3 lines changelist provided at updating?
Idebutterpiep said:
New firmware:
PDA: G970FXXU1ASE5
CSC: G970FOXM1ASE5
Changelist 16003457
Build date Sat, 18 May 2019 04:22:17 +0000
Security Patch Level 2019-05-01
Germany ----> DBT
Russia ---> SER
Click to expand...
Click to collapse
Now also firmware Netherlands -----> PHN with samfirm ore ota on your phone.
the real changes? I don't know exactly but maybe on Samsung website: https://www.sammobile.com/firmwares/
cairel said:
Where could we find the real changes, not only the 3 lines changelist provided at updating?
Click to expand...
Click to collapse
May 2019 security patch, improved Wi-Fi connectivity and stability, Camera stability, and Bluetooth connectivity and stability.
Idebutterpiep said:
May 2019 security patch, improved Wi-Fi connectivity and stability, Camera stability, and Bluetooth connectivity and stability.
Click to expand...
Click to collapse
Thank you for the answer. Those are the few lines available at updating but usually it includes some new functionalities or changes, that's why I was asking for the 'real changes' (maybe not a clear expression).
Idebutterpiep said:
Now also firmware Netherlands -----> PHN with samfirm ore ota on your phone.
Click to expand...
Click to collapse
New bug-fixing Galaxy S10e update now available in more countries. The new update (XXU1ASE6) fixes the freezing issues users had been facing with the first May security update (G970FXXU1ASE5).
I got it on OTA by phone.
You can download the new software through firmware database and flash it on your phone using a Windows PC (https://www.sammobile.com/firmwares/galaxy-s10e/SM-G970F/).
You can download the new firmware also with SamFirm.
Idebutterpiep said:
New bug-fixing Galaxy S10e update now available in more countries. The new update (XXU1ASE6) fixes the freezing issues users had been facing with the first May security update (G970FXXU1ASE5).
I got it on OTA by phone.
You can download the new software through firmware database and flash it on your phone using a Windows PC (https://www.sammobile.com/firmwares/galaxy-s10e/SM-G970F/).
You can download the new firmware also with SamFirm.
Click to expand...
Click to collapse
There are reports that it is also rolling out in the UK now but I've not received it yet and it's not up on sammobile.com either atm.
pls try pubg after this update and tell me if there any frames drop and lag in game
Guys, I have a question.
Currently my S10e is running T-Mobile CZ branded rom with CSC TMZ. I would like to debrand my phone and flash stock global rom. Can I flash global rom with XEZ CSC ? Also I don't want to lose knox.
New firmware update for Switzerland and Germany;
Model SM-G970F
Model name Galaxy S10e
Country Switzerland/Germany/Netherlands
Version Android 9
Changelist 16003457
Build date Fri, 31 May 2019 11:03:26 +0000
Security Patch Level 2019-05-01
Product code AUT/DBT/PHN ----.> OXM
PDA G970FXXU1ASE7
CSC G970FOXM1ASE5
Idebutterpiep said:
New firmware update for Switzerland and Germany;
Model SM-G970F
Model name Galaxy S10e
Country Switzerland/Germany/Netherlands
Version Android 9
Changelist 16003457
Build date Fri, 31 May 2019 11:03:26 +0000
Security Patch Level 2019-05-01
Product code AUT/DBT/PHN ----.> OXM
PDA G970FXXU1ASE7
CSC G970FOXM1ASE5
Click to expand...
Click to collapse
hopefully this arrives in UK soon
Changelog?
Sent from my Samsung SM-G9700 using XDA Labs
kaihansen2001 said:
Changelog?
Sent from my Samsung SM-G9700 using XDA Labs
Click to expand...
Click to collapse
The new update carries the same changelog as the previous two May security updates.
Samsung released the original May 2019 security patch (software version XXU1ASE5) for the Galaxy S10 towards the end of last month. However, the update was soon taken off the air when it was found to be causing serious issues for some users. The company then released a hotfix update (XXU1ASE6) to take care of those issues.
However, amidst all the hustle and bustle, Samsung seems to have messed up the update’s release. Galaxy S10 owners in some markets did not receive the hotfix update, but only the original bug-filled May security update. Meanwhile, in a few others, the device is still on the April 2019 security patch. The new update, which carries the software version XXU1ASE7, should now settle things down for everyone. After all, it’s an important update, as it significantly improves the Night mode on the Galaxy S10 camera.
Getting the latest update is the same as usual. You should be able to download it over the air from the Settings » Software update menu on your phone.
Alternatively, you can download the firmware from https://www.sammobile.com/firmwares/galaxy-s10e/SM-G970F/ and flash it on your phone using Odin.
Or use SamFirm to download firmware on your computer and flash it with Odin.
NoOneCanHelpMe said:
hopefully this arrives in UK soon
Click to expand...
Click to collapse
UK BTU software is up on sammobile today
https://www.sammobile.com/firmwares/galaxy-s10e/SM-G970F/BTU/
Also available via OTA on my phone this morning.
sudman said:
UK BTU software is up on sammobile today
https://www.sammobile.com/firmwares/galaxy-s10e/SM-G970F/BTU/
Also available via OTA on my phone this morning.
Click to expand...
Click to collapse
thanks, I just checked. it's here
sweetness
Been out of the rooting game for years, the complexity involved is doin' me a heckin' bamboozle, fren. I'm in the US and purchased the G970F Exynos so i can root etc. Which country's firmware should i be using?
Anyone for the Snapdragon version?
You guys have a stock android or at&t version for the Snapdragon version? Btw, I have a white s10e in perfect condition for sale on Swappa.com under Kyle R.
I'm not going to root it if I can sell it on swappa. Anyone in the US interested in my swappa offer? Please let me know. And please also answer my question about the firmware.
In this thread, You can share the Mega-Links of new firmware's (OFFICIAL STOCK) for the Galaxy S10e (so: NO CUSTOM ROM's and/or ROOT-talk)...
How to flash firmware to your phone:
Odin
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. Extract (un-rar) the firmware file (i.e. to folder cdin) ***
2. Download Odin v3.13.3
3. Extract Odin ZIP file (i.e. to folder cdin)
4. Open Odin v3.13.3
5. Power OFF your S10+
6. Reboot Phone in Download Mode (1st plug-in USB-cable to your S10+!!!), push Bixby + Volume Down buttons, while pushing them plug-in USB-cable to PC
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots
9. Make sure re-partition is NOT ticked
10. Click the start button, sit back and wait few minutes
*** You can always find the LATEST firmware in msg #2
Created 2019-11-29
Last Updated 2019-11-29
XDA:DevDB Information
[BSKO] OFFICIAL STOCK FW-update (Odin) thread (28 Nov 19) GALAXY S10e SM-G970F, ROM for the Samsung Galaxy S10e
Contributors
Idebutterpiep
ROM OS Version: Android 10
Version Information
Status: Stable
Created 2019-11-29
Last Updated 2019-12-28
Galaxy S10e now receiving One UI 2.1 update with April 2020 security patch
Galaxy S10e April 2020 security patch in Switzerland and Germany
Model SM-G970F
Model name Galaxy S10e
Country Switzerland/Germany
Version Android 10
Changelist 18242812
Build date Fri, 20 Mar 2020 09:31:52 +0000
Security Patch Level 2020-04-01
Product code AUT/DBT
PDA G970FXXU4CTC9
CSC G970FOXM4CTC5
Download with SamFirm, with Frija or from Samsung https://www.sammobile.com/samsung/galaxy-s10e/firmware/#SM-G970F
UN-ZIP the archive and place the files in the designated slots in Odin v3.13.3 or Odin v3.14.1
HOME_CSC_OXM -> data will stay intact
CSC_OXM -> device will be resetted
SM-G975F OXM multi CSC ( ACR AFG AFR ATO AUT BGL BNG BRI CAC CAM CAU CHO COO DBT DKR ECT EGY EON EUR ILO INS ITV KSA LAO LUX MID MWD MXO MYM NEE NPL ORX PAK PEO PHE PHN ROM SEB SEE SEK SKZ SLK SMP THL THR TPA TPH TTT TUN TUR XEF XEH XEO XEU XEZ XFE XME XSG XSP XTC XXV )
single : ( BTC BTU CPW DOO EMP GLB GTO LYS MAT MM1 NZC OPS SER SIN SIO SMA STH TEB TEL TMC TNZ VAU VNZ WTL XFA XFV XNZ XSA )
Today I downloaded G970FXXU3BSKO with SamFirm. Extracted the file with WinRar and flashed with Odin 3.13.3.
After flashing works like a charm and didn't lose apps.
Just been offered this upgrade OTA.
Brand new unbranded phone bought in the UK from Argos for £334.50 ($434) as part of the Black Friday promo.
1975.2 Mb
Security Patch 1st Dec
I'll post the changes after applying
The stable update is also rolling out to beta users in India, Poland, Spain, and the UK.
Official stock FW Update for Panama, United Kingdom, United Arab Emirates, Vietnam, India, Spain, Poland, France, United Kingdom/Ireland is out and downloadable from: https://www.sammobile.com/samsung/galaxy-s10e/firmware/#SM-G970F
Idebutterpiep said:
The stable update is also rolling out to beta users in India, Poland, Spain, and the UK.
Official stock FW Update for Panama, United Kingdom, United Arab Emirates, Vietnam, India, Spain, Poland, France, United Kingdom/Ireland is out and downloadable from: https://www.sammobile.com/samsung/galaxy-s10e/firmware/#SM-G970F
Click to expand...
Click to collapse
I'm not in the Beta, this was offered OTA to a 'clean' new phone that was only opened two days ago and hasn't even been fully configured yet as I'm waiting for my otterbox before using it properly.
You don't need to go to sammobile, you can get it OTA from Settings.
pinsb said:
I'm not in the Beta, this was offered OTA to a 'clean' new phone that was only opened two days ago and hasn't even been fully configured yet as I'm waiting for my otterbox before using it properly.
You don't need to go to sammobile, you can get it OTA from Settings.
Click to expand...
Click to collapse
If you don't want to wait for OTA you can download from SamMobile.
Still waiting (Netherlands)
Zhypr said:
Still waiting (Netherlands)
Click to expand...
Click to collapse
If you are on PHN you can flash DBT Germany. Is Multi-OXM. Use Home CSC I used it without problems or losing apps.
Hey guys,
can i just flash it with Odin just like that?
Curently im on
AP: G970FXXS3ASJG
CP: G970FXXS3ASJA
CSC: G970FOXM3ASJD
Model: SM-G970F/DS
Thanks in advance!
k0nko87 said:
Hey guys,
can i just flash it with Odin just like that?
Curently im on
AP: G970FXXS3ASJG
CP: G970FXXS3ASJA
CSC: G970FOXM3ASJD
Model: SM-G970F/DS
Thanks in advance!
Click to expand...
Click to collapse
Yes, if you are in Multi-OXM you can flash with Odin. Ue Home-CSC and you will not lose anything. Good Luck.
Zhypr said:
Still waiting (Netherlands)
Click to expand...
Click to collapse
Netherlands is downloadable from https://www.sammobile.com/samsung/galaxy-s10e/firmware/SM-G970F/PHN/download/G970FXXU3BSKO/305147/ or with SamFirm/Frija.
Idebutterpiep said:
Netherlands is downloadable from https://www.sammobile.com/samsung/galaxy-s10e/firmware/SM-G970F/PHN/download/G970FXXU3BSKO/305147/ or with SamFirm/Frija.
Click to expand...
Click to collapse
Yep, got it via OTA myself now :laugh:
will OTA work after flashing with odin?
cucurucu said:
will OTA work after flashing with odin?
Click to expand...
Click to collapse
Ota will work after flashing with Odin if there is a new firmware for your CSC.
Nordic Ota is on and down loadable.
What if my version is Multi-OWE?
sfc-mt-blck said:
What if my version is Multi-OWE?
Click to expand...
Click to collapse
OWE multi CSC ( ARO CHO COO EON MXO PEO TPA TTT ZTO )
You can try Brazil https://www.sammobile.com/samsung/galaxy-s10e/firmware/SM-G970F/ZTO/download/G970FXXS3ASJG/300190/ or Chili https://www.sammobile.com/samsung/galaxy-s10e/firmware/SM-G970F/CHO/download/G970FXXU3BSKO/305195/
1. Download one of these. You also can use SamFirm to download. Using ZTO or CHO
2. Extract them with WinRar.
3.Then flash with Odin 3.13.3. If you use Home CSC you won't lose apps.
Galaxy S10 January 2020 security update rolling out now.
The January update for the Galaxy S10 series is the first one for these phones since they were updated to Android 10, and it seems the initial Android 10 build was quite stable, as the new update does not bring any improvements or fixes. It only includes the latest security patch.
The new update comes with software version G97*FXXS3BSL4. The update is currently available in Switzerland.
You can download from https://www.sammobile.com/samsung/galaxy-s10e/firmware/SM-G970F/AUT/download/G970FXXS3BSL4/309489/ or use SamFirm or Frija.
Idebutterpiep said:
Galaxy S10 January 2020 security update rolling out now.
The January update for the Galaxy S10 series is the first one for these phones since they were updated to Android 10, and it seems the initial Android 10 build was quite stable, as the new update does not bring any improvements or fixes. It only includes the latest security patch.
The new update comes with software version G970FXXS3BSL4. The update is currently available in Switzerland. Other countries will follow soon.
You can download from https://www.sammobile.com/samsung/galaxy-s10e/firmware/SM-G970F/AUT/download/G970FXXS3BSL4/309489/ or use SamFirm or Frija.
Click to expand...
Click to collapse
Used SamFirm to download G970FXXS3BSL4, used WinRar to unpack, flashed it with Odin3-V3.13.3 over PHN (Netherlands) used Home CSC and had no issues or lost apps.