Hi.
I used to connect a USB to Network adapter (chipset ASIX AX88772B ) to my Redmi Note 4 and all was fine, easy:
I could surf/download using a network cable.
After I switched to Note 8 Pro I wanted to do the same, but it turns out that apparently my "old" usb-Ethernet adapter is not compatible with my new smartphone.
I connected a new OTG cable (usb C to usb A, it works, tested) and then connected the old Usb-to-Ethernet adapter to it.
No way: The adapter blinks for one second and then no lights is on.
I installed "USB Device Info" app and I could read info about the adapter, e.g. chipset ASIX AX88772B .
As someone suggested me, I tried to disable the wifi, the data mobile and set it to Plane mode: it was useless.
Can please someone suggest me a USB-to-Ethernet adapter that for SURE is compatible wit Redmi Note 8 Pro?
I mean, one that you tested working flawlessly.
Thanks.
I am also in the same situation on the redmi note 8 I think it is the type c otg cable, managed to solve ??
I am using this multi device adapter with my Redmi Note 8 Pro and am able to use wired ethernet. I cannot think of any issues or problems that I have had so far with this wired usb to ethernet setup. Keep in mind, you will need to provide your own power adapter, because this usb to ethernet hub does not include one.
TOTU USB C Hub Upgraded 13 in 1 Type C Hub to 4K HDMI & DP, VGA, 2 USB3.0/2 USB2.0 - available on Amazon or eBay
Hope it helps someone.
Hi all i have been trawling through various forums. I ordered the following off Amazon and it works perfectly. Excellent Ethernet connection on my Redmi note 8.
Plugable USB C Ethernet Adapter, Fast and Reliable Gigabit Connection, Compatible with Windows 11, 10, 8.1, 7, Linux, Chrome OS, Dell XPS, HP, Lenovo : Amazon.co.uk: Computers & Accessories
Buy
www.amazon.co.uk
I think Redmi do not support and ethernet connectors using the chipset AX88772B. I specifically chose the above adapter as it uses AX88179. I suggest that any adapter that uses chipset AX88179 will work. It maybe the same for other Redmi models.
All the best.
Related
Has anyone else been experiencing problems with ethernet adapters plugged in via micro to USB 2.0 and 3.0? My Note Pro has no issues detecting wired, wireless mice and keyboards. With the ethernet to USB adapters is a whole different story, there is no indication of the ethernet adapter routing data.
I have tried several ethernet adapters, the link state indicators on the ethernet adapters do light up, but once again Android does not give any indication of the connection being established. I have disabled WiFi, and even checked under 'Other Networks' menu on the system settings. Ethernet is listed as an option within the menu, but is disabled and grayed out, with or without the adapter and connection.
The cable has been tested and there are no issues, also I have tested the ethernet adapters with my laptop and my laptop has no issues establishing a connection via the adapter. I have had no luck finding for the solution, some people have reported this issue with other Android devices, but a clear solution is still undefined.
If anyone has a solution, feel free to post your findings.
After all those of us that are having this issue would appreciate a solution.
Sent from my SM-P900 using xda app-developers app
Works fine for me using the Apple Ethernet adapter. I also have a USB 3 -> Gig E but that does not work,
See my post here---> http://forum.xda-developers.com/showpost.php?p=50983611&postcount=41
Mike02z said:
Works fine for me using the Apple Ethernet adapter. I also have a USB 3 -> Gig E but that does not work,
See my post here---> http://forum.xda-developers.com/showpost.php?p=50983611&postcount=41
Click to expand...
Click to collapse
Here are some of the adapters that I used:
UNITEK USB 3.0
http://www.amazon.com/gp/product/B00EHDNAOE/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
I/O Crest USB 2.0
http://www.amazon.com/gp/product/B003M8I0RM/ref=wms_ohs_product?ie=UTF8&psc=1
I tested both of these adapters with USB 2.0 & 3.0 micro to USB adapters, both garnered the same result. It is odd that even the USB 2.0 adapter.
does not work either.
This bobj ethernet adapter which I had from Toshiba Thrive days works on tab pro 12.2. I must have used an OTG usb adapter to connect it. All are probably 2.0. Don't have a Note.
http://www.amazon.com/gp/aw/d/B007RTACDM
Sent from my Nexus 5 using Tapatalk
I have also been trying to do this - using a generic device from amazon that was advertised ad supporting my galaxy tabs. Greyed outat first, then suddenly worked - for two days. Since then, the ethernet option has been greyed out in settings, and friends have brought laptops which connect fine so i am sure it is not the cable. . Also had been using the charging port with adapter for months before this to use an external keyboard and mouse. Those no longer work either. Much harder to troubleshoot this tablet than any real computer!
Hi,
I have the U11+ but can not get my lan adapters to work.
I have an Anker AH212 with rtl8167 chipset in it. Only the hub section works.
https://www.amazon.de/gp/product/B015875MQQ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I also have purchased just for this the Flagpowerhdmi4k/lan/usb-c hub adapter.
https://www.amazon.de/gp/product/B075QD1KBL/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
HDMi and hub works but lan doesn't.
I also have a very old 10/100 NExus 7 noname lan-dongle that also doesn't work on my U11+.
I also tried it with RNDIS/Ethernet setting in Developer options, but to no avail.
Has anybody been able to get any lan adapter working on this phone ?
rgrds
I tried to use Belkin USB-C Ethernet adapter dedicated for Macbook Pro which is working with Samsung S8, but without success.
Just ordered a Oneplus 6, it will be my first USB C device, any recommendations for USB C - OTG adapters that work nicely?
Thanks!
I have had this for 1.5 years for now and works as expected (atleast with usb stick... first with OP 3T and now with OP6): https://www.aliexpress.com/item/Typ...330.html?spm=a2g0s.9042311.0.0.27424c4dxAL2qC
such a discomfort that otg cannot functioning via any cable.
It's highly inconvenient to remove my magnet adapter for magnet cable.
OnePlus sells one from their website https://www.oneplus.com/oneplus-type-c-otg-cable
I got this one from Amazon and it works great.
https://smile.amazon.com/gp/product/B01COOQIKU/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
I bought this one and it works well - Type C to USB 3.0 OTG Adapter, USB-C 3.1 Male to USB 3.0 A Female Adapter, aloici USB-C OTG Host Cable (On the Go) for MacBook Pro, Galaxy S9/8/Note8/Tab, Pixel 2, OnePlus5, Sony XZ and More (black) https://www.amazon.com/dp/B076ZH1P5M?ref=yo_pop_ma_swf
Around 10$.
Usb typa C to Usb 3.1 OTG adapter.
I got this since OnePlus 3 phone. Works fine on Op6. Just instaled one rom with it.
Hi guys, I got a usb 3.0 I used to use on my Samsung, now I got an adaptor for my op6, I have an issue, everything works great, but the videos are laggy, what could this be any ideas, adaptor fault, or the usb is too slow?
I got an adaptor with my Mayflash Magic-NS wireless adaptor. It's working nicely on my Switch and on my phone (yeah I can use various wireless controllers, some of which would not work well on android due to this device). Works for my USB disk on this phone nicely too.
Sent from my OnePlus 6 using XDA Labs
1st time posting so excuse errors
I wish to connect my note 9 with tech 21 case into a powered multi port hub and connect to my monitor via hdmi and use samsung dex
i would like to have usb 3 ports also usb 2 if necessary to expand available connections an audio jack for connecting speakers vga connection or another hdmi so i can use 2 moniters
is it possible to plug my ethernet cable into the hub and have a fast wired connection if so how do i set this up
i dont have a laptop i am currently using just a simple adapter at the moment but love dex and want to make this my desktop
i looked at the official dex stations but all the reviews say they are hard to connect with a case on
i have seen some docks on amazon but the usb c cable coming out of the hub says that it is only to charge laptops or other devices
please help it will be sooooo appreciated
thank you
https://www.amazon.com/Extension-CableCreation-SuperSpeed-Compatible-MacBook/dp/B01FM500GQ
I used this cable to connect my note 8 in its case to the original dex Dock which has Ethernet and 2 USB ports, not sure if they are USB 2 or 3 to be honest as never used them
Hello,
does anybody know a working USB ethernet adapter for the Pixel 3a?
I have tried one with ASIX AX88772A (USB 2.0) and another one with AX88179 (USB 3.0) chipset and both are not recognized correctly.
The Pixel does recognize some USB device and the ethernet adapter is powered up, but it is not possible to switch to data transfer.
I am using this and it works.
cordezz said:
Hello,
does anybody know a working USB ethernet adapter for the Pixel 3a?
I have tried one with ASIX AX88772A (USB 2.0) and another one with AX88179 (USB 3.0) chipset and both are not recognized correctly.
The Pixel does recognize some USB device and the ethernet adapter is powered up, but it is not possible to switch to data transfer.
Click to expand...
Click to collapse
I can absolutely rule out
Alfa awus 0036nh - ralink 3070
Alfa awus 0036h - realtek 8187
Micro USb - realtek 8188e
Micro USB - ralink 5370
small form + 3db antenna ralink 5370
Although I've had great luck with gos modules I can confirm the Ublox7 / Vk-172 works well with the 3a. My GlobalSat BU-353-S4 hasn't cooperated yet. Sorry to say that gps wardriving is much more difficult but just as rewarding, if you do find a good wifi unit that works with the pixel do let us know.
cordezz said:
Hello,
does anybody know a working USB ethernet adapter for the Pixel 3a?
I have tried one with ASIX AX88772A (USB 2.0) and another one with AX88179 (USB 3.0) chipset and both are not recognized correctly.
The Pixel does recognize some USB device and the ethernet adapter is powered up, but it is not possible to switch to data transfer.
Click to expand...
Click to collapse
I don't have a 3a, but this one works fine with my Pixel 3.
https://www.amazon.com/Syntech-Ethe...3SNZHGZK92B&psc=1&refRID=0YCFKC13T3SNZHGZK92B
dcarvil said:
I don't have a 3a, but this one works fine with my Pixel 3.
https://www.amazon.com/Syntech-Ethe...3SNZHGZK92B&psc=1&refRID=0YCFKC13T3SNZHGZK92B
Click to expand...
Click to collapse
It works on my Pixel 3A as well. Of course, I'm using a USB 3 to USB-C adapter. The performance is quite poor. I'm getting about 75 MBPS on a 300 MBPS internet connection. I do much better on Wi-Fi. I tried the same on a Chromebook, and the NIC worked much better on USB 3, then via the USB-C adapter. I'm wondering if it's a problem with the USB 3 to USB-C adapter, or is the nature of the beast when doing that conversion?
Have you seen the same? Which conversion adapter are you using?
Thank you
I get 89 Mbps, which is the limit of my internet connection. I'm using this adapter:
https://www.amazon.com/gp/product/B077FY7831/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Thank you
dcarvil said:
I get 89 Mbps, which is the limit of my internet connection. I'm using this adapter:
https://www.amazon.com/gp/product/B077FY7831/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
So, using the combination of that network adapter and that USB adapter, I'm getting a max of 102 MPS on my Pixel 3a. Using the same combination on a Chromebook, I'm getting 297 MBPS. Using Wi-Fi, on the Pixel, I get close to what I'm getting wifi / wired on the Chromebook.
I wonder if there is some setting on the Pixel, or a hardware limitation.
Has anyone found a way to cast or screen mirror when using USB Ethernet ?
Obviously my tv, Chromecast and fire TV are all connected to the same Ethernet network.
But every screen mirror / cast app I've tried won't work unless WiFi is connected on the phone.
The PinePhone dock worked on my pixel 3a for ethernet tethering. Sept. 22 OTA rooted [Magisk] Tethering Enabler verizon grandfathered UDP. Plugged into a switch with wifi mesh and whole home wifi works. I need a longer LAN cable to put my phone in a spot with better signal. I have not tried HDMI but I can if someone needs that.