Hello
Im searching for a solution to install Google on a devie with EMUI 10.1.1.146
I have a P40 Lite 5G and i was trying some Videos from YT but every time se thame problem.
LZ Play doesn't work wih this EMUI.
I think that is a Global problem with this new EMUI.
Have anybody an idea ????
Thx
Just bought a P40 lite 5g myself on ebay and I'm having the same problem. Like an idiot I updated EMUI when i first started the phone, and now I can't roll it back or install google services as LZ Play won't work. Really nice phone, I think I will just sell it though and get a Xiaomi Pocophone F2 instead. Too much of a headache messing about for days with these youtube video instructions that don't work.
Hi.
wait some time i think it will be a New method.
All other phones will get the Update an will have se same solution.
That's while i think there will be a new solution.
The Phone is realy nice.
I think to have Google on a Huawei Smartphone is interest of Google <=> Huawei
Huawei want to sell phones
Google want to earn money with apps
you can try this
And soon I will release this tool
hello.
I have tried it with the date but it doesn't work.
got the same mesage.
Your Tool in the Video looks amazing.
i hope it will Do a good work.
did You test it on a device with the newest emui like my Phone?
thx
Do you have some screenshot of the error? Just to check what's happening
Sent from my Pixel 4 using Tapatalk
That's the error
OK, try this
make sure you have:
-no sim card inserted
-language is set to english
-factory reset (because I see you have previously ran a manual installation and services and other components are installed as normal apps) - or delte them manually
-connect to wifi
-restore the "chinese app" using hisuite
put DATE back to 20.06.2020 and disable automatic time
run the "chinese app" and try again
I'll retry with the procedure because I need to FR anyway for the development, can't remember if that was the message I got (your device is not supported when translated)
What Backup to use from Match oder April?
thx
Use the one from this video
this restore should give you a valid lzplay with data
So i have done all
Frist Tab ... error message
changing date
second Tab...error message
The error mesage says that the device is not compatible (trabslate with Google from Chinese)
I think that the Main Problem ist the EMUI 10.1.1
anita98558 said:
That's the error
Click to expand...
Click to collapse
Yep, that's it. There's no way past it on P40 Lite 5G.
bender_007 said:
And soon I will release this tool
Click to expand...
Click to collapse
awesome! It' seems so automatic
i hope it will fix my problem
bender_007 said:
Use the one from this video
this restore should give you a valid lzplay with data
Click to expand...
Click to collapse
is there a way to test it with your solution?
I think the Problem might be:
1. EMUI (closed Backdoor)
or
2. Unsupported Device
anita98558 said:
is there a way to test it with your solution?
Click to expand...
Click to collapse
No, this will not fix your phone sadly, it relies on LZplay as all of them, LZplay was that "backdoor" that allowed it. You can try to find some downgrade rom or tutorial (maybe this one I linked, can't be for sure since I have the older emui)
bender_007 said:
No, this will not fix your phone sadly, it relies on LZplay as all of them, LZplay was that "backdoor" that allowed it. You can try to find some downgrade rom or tutorial (maybe this one I linked, can't be for sure since I have the older emui)
Click to expand...
Click to collapse
For the first.
Thank You for Your Support.
With the HiSuite i can't go back toa a previous Version of the EMUI.
So i understand that in the moment i'ts difficult to find a solution.
Today i will try it a few Times with the solution you told me yesterday.
After some tries today still the same.
It doesn't work ?
Yeah, sadly you can't do anything there, unless there is a firmware (older one). One could try downloading adb, running "adb logcat -f /sdcard/log.txt" , running lzplay and after the error pops up press Ctrl-c in command prompt. Maybe the log will tell more
Sent from my Pixel 4 using Tapatalk
Related
After upgrading to the latest version of firmware (SmartWatch 2 SW2 v1.4.54) my smartwatch restarts and try to install firmware... during SW2 update process status bar freezed near the end and nothing more happend.
Please help me to fix this problem
ps: I cannot find any Q&A forum for sony smartwatch
Please tell us what have you tried to do up until this point and we'll go from there. I've had this happen to me too, but in the beginning of the update, namely when the firmware was being transferred to the watch.
Similar happened to me, just in my case the update process went to the finish, and then the watch turned off (black screen) and that was over. Can't turn it on, does not show charging screen, nothing, bricked-dead...
Thanks.
I went to google play and upgrade Smartwatch SW2 to it's latest version, which is released yesterday.
I went out of room... when I came back, I saw it freezes in this step... after restarting my SW2, nothing happened.
omidmr said:
Thanks.
I went to google play and upgrade Smartwatch SW2 to it's latest version, which is released yesterday.
I went out of room... when I came back, I saw it freezes in this step... after restarting my SW2, nothing happened.
Click to expand...
Click to collapse
How many apps do you have running for/on the watch? Have you tried uninstalling all of them and doing a clean install?
kamikaze666 said:
How many apps do you have running for/on the watch? Have you tried uninstalling all of them and doing a clean install?
Click to expand...
Click to collapse
It's about updating firmware... currently it cannot turn on completely... it's unpaired, I cannot pair it or see it in other Bluetooth devices.
How can I do a clean install of firmware? before pairing?
omidmr said:
It's about updating firmware... currently it cannot turn on completely... it's unpaired, I cannot pair it or see it in other Bluetooth devices.
How can I do a clean install of firmware? before pairing?
Click to expand...
Click to collapse
I read on one forum that this issue with the firmware may appear because of the apps that are installed for the watch. Namely, after/at the same time it is updating, the watch also tries to pull all info from the phone, including apps and all. I don't know if this will work, but you can try, it won't hurt.
Uninstall all SW2 apps, restart the watch and try again.
kamikaze666 said:
I read on one forum that this issue with the firmware may appear because of the apps that are installed for the watch. Namely, after/at the same time it is updating, the watch also tries to pull all info from the phone, including apps and all. I don't know if this will work, but you can try, it won't hurt.
Uninstall all SW2 apps, restart the watch and try again.
Click to expand...
Click to collapse
nope, nothing happened...
As I told you, my smartwatch does not connect to my cellphone now!
omidmr said:
nope, nothing happened...
As I told you, my smartwatch does not connect to my cellphone now!
Click to expand...
Click to collapse
It was worth a shot... This was what I managed to find when it happened to me...
Anybody else have an idea on what can be done?
kamikaze666 said:
It was worth a shot... This was what I managed to find when it happened to me...
Anybody else have an idea on what can be done?
Click to expand...
Click to collapse
I know I can use dfu-utils to flash from CLI, but I cannot find any DFU file for smartwatch 2.
If it is possible for you, make a backup from yours and give it to me thanks.
At this point you used to be able to "repair" the firmware on the watch using the Sony Update Service. Using your pc you used to be able to load a basic firmware onto the watch and start again...but I think Sony have removed the SW2 from this service.
I think someone on here said they used the SW1 repair option and it worked for them but i'm not sure I would be brave enough to try that unless the watch was totally stuck.....
omidmr said:
I know I can use dfu-utils to flash from CLI, but I cannot find any DFU file for smartwatch 2.
If it is possible for you, make a backup from yours and give it to me thanks.
Click to expand...
Click to collapse
I managed to find this, however, I am not exactly sure for which version it is... https://github.com/underverk/SmartWatch/wiki/Restoring-original-Firmware. I am not able to get to my personal PC for some time, so I won't be able to provide you with a system dump from my watch.
ruggs1234 said:
At this point you used to be able to "repair" the firmware on the watch using the Sony Update Service. Using your pc you used to be able to load a basic firmware onto the watch and start again...but I think Sony have removed the SW2 from this service.
I think someone on here said they used the SW1 repair option and it worked for them but i'm not sure I would be brave enough to try that unless the watch was totally stuck.....
Click to expand...
Click to collapse
Yes, they removed SW2 and SW1 option is not working for SW2!
hennoit lime
kamikaze666 said:
I managed to find this, however, I am not exactly sure for which version it is... https://github.com/underverk/SmartWatch/wiki/Restoring-original-Firmware. I am not able to get to my personal PC for some time, so I won't be able to provide you with a system dump from my watch.
Click to expand...
Click to collapse
Thanks a lot...
I saw that link, that's for SW1.
But I've found latest SW2 firmware from their package in google play
Now my problem is that I cannot restore those images, because there are some differences between those packages and what dfu-utils uses!
I've faced "Error: Only DfuSe file version 1.1a is supported" error, there are a paragraph in http://dfu-util.gnumonks.org/dfuse.html site about this problem, under ".dfu files" heading.
Hello,
After a failed Windows 10 upgrade attempt, my HTC 8x was working fine however after few days I attempted to soft reset it and all hell broke loose! Its stuck in reset gears loop ever since.
Note: Being a non-poster member (so far), I'm not allowed to post outside links so unable to post screenshots!
http: //s16.postimg.org/e58yok9th/image.jpg
http: //s1.postimg.org/jk31zmncf/image.jpg
I have tried the below however not successful, any help is appreciated...
1. Attempt to hard reset by holding down the volume down key while powering on the device > Result: Doesnt show the Exclamation ( ! ) symbol
2. Windows Phone Recovery tool doesnt detect the phone > choose my phone was not detected > Start the phone in boot loader mode by holding both volume up and down keys while powering on > It goes to boot loader mode however reports "Software package is not found on server"!
http: //s29.postimg.org/ivtb6n21j/image.jpg
3. RUU_ACCORD_WR_GDR3_00_MR_HTCCN_CHS_CT_4.13.1401.03_0.21.70_RETAIL_ENC_RELEASE.exe and similar packages > Old package error
http: //s22.postimg.org/gfcdp55s1/NBFError.jpg
4. HTCDeviceInfo.exe successfully detects the device however HTCRomUpdater fails to flash .NBH file http: //s18.postimg.org/5kpf6h70p/HTCRom_Flashor_Error.jpg
5. FFUTool.exe doesnt detect the device! http: //s2.postimg.org/52daia255/FFUTool_Failure.jpg
6. Thor2 doesnt decte the device http: //s4.postimg.org/ei60y1b1p/Thor2_Error.jpg
Is there ANYTHING else I can do to get this device working? Or buying a new phone is the only solution?
Fixed!
I was able to fix the device using NSU with original firmware FFU.
Where did you find?
k00lf1re said:
I was able to fix the device using NSU with original firmware FFU.
Click to expand...
Click to collapse
where did you find original firmware?
How were you able to install Windows 10 mobile on the 8X man? Can you do that again?
killerz0ne said:
How were you able to install Windows 10 mobile on the 8X man? Can you do that again?
Click to expand...
Click to collapse
windows phone 10 is not available for htc 8x now. old methods not work anymore now.
rza35 said:
windows phone 10 is not available for htc 8x now. old methods not work anymore now.
Click to expand...
Click to collapse
I am well aware of that. Do you guys think we will ever be able to install W10 on our phones. Contacted HTC support and they said that the 8X will not be compatible with W10 because of some hardware limitations, but they were not willing to tell specifics. What are the chances that we will be able to still install W10 by unofficial means?
k00lf1re said:
I was able to fix the device using NSU with original firmware FFU.
Click to expand...
Click to collapse
Can you maybe go into a bit more detail on what you had to do to get the original firmware on the device? I'm having the same problem after getting the update from MS today.
mbrio said:
Can you maybe go into a bit more detail on what you had to do to get the original firmware on the device? I'm having the same problem after getting the update from MS today.
Click to expand...
Click to collapse
Same here. Installed Win10 update and phone is bricked. Need the detail and links to flash it
k00lf1re said:
I was able to fix the device using NSU with original firmware FFU.
Click to expand...
Click to collapse
How did you do it, when I use NSU it doesn't want to recognise my 8x
The fact is that the update was sent to ALL HTC 8X in the world. Mine installed the update during the night without my consent.
Microsoft will probably blame Skynet for trying to terminate all and each 8x there is.
Well...Mine is broken now. I'll be waiting for official fixes.
WaGo! said:
The fact is that the update was sent to ALL HTC 8X in the world. Mine installed the update during the night without my consent.
Microsoft will probably blame Skynet for trying to terminate all and each 8x there is.
Well...Mine is broken now. I'll be waiting for official fixes.
Click to expand...
Click to collapse
Exactly. Still bricked (stuck in reboot loop) and waiting for some official guidance but so far nothing...
BrannanD said:
Exactly. Still bricked (stuck in reboot loop) and waiting for some official guidance but so far nothing...
Click to expand...
Click to collapse
My HTC 8x routine now:
1- Turn On.
2- Show message about the unsuccessful update.
3- Play the alarm (set to play daily at 7 am)
4- Turn Off.
5- GoToAndPlay(1) hahahahahahahha
Spent hours to restore some other rom, only got "INVALID VENDER ID" (sic) by the ROMUpdateUtility. My phone completed the update, seems to work fine, just reboots randomly after a couple of minutes. Had to setup wifi after a hard reset, otherwise apps were missing, including the Settings app. And the letters are tiny. This is sad and hilarious. Also, camera is gonsky.
gabest11 said:
Spent hours to restore some other rom, only got "INVALID VENDER ID" (sic) by the ROMUpdateUtility. My phone completed the update, seems to work fine, just reboots randomly after a couple of minutes. Had to setup wifi after a hard reset, otherwise apps were missing, including the Settings app. And the letters are tiny. This is sad and hilarious. Also, camera is gonsky.
Click to expand...
Click to collapse
Where did you get the ROMUpdateUtility (and a suitable ROM) from?
BrannanD said:
Where did you get the ROMUpdateUtility (and a suitable ROM) from?
Click to expand...
Click to collapse
I think you misunderstood me, no roms worked. There are many on the internet, even here on this forum. There seems to be an id in the phone and it does not match with the package.
Tried these with my t-mobile branded EU phone, all invalid.
RUU_ACCORD_U_APO_00_HTC_Europe_2.00.401.03_1.11b.32.19.23_2_15.42.32_RETAIL_ENC_RELEASE
IMG_ACCORD_U_GDR2_00_S_HTC_Europe_3.41.401.01_1.17b.32.19.14_15.62b.32_RETAIL_ENC_RELEASE
RUU_ACCORD_WR_GDR3_00_MR_HTCCN_CHS_CT_4.13.1401.03_0.21.70_RETAIL_ENC_RELEASE
Also talked with HTC live support, they have no idea of course.
Windows Phone Recovery Tool detects the phone, but can't offer any ROM.
terible
gabest11 said:
I think you misunderstood me, no roms worked. There are many on the internet, even here on this forum. There seems to be an id in the phone and it does not match with the package.
Tried these with my t-mobile branded EU phone, all invalid.
RUU_ACCORD_U_APO_00_HTC_Europe_2.00.401.03_1.11b.32.19.23_2_15.42.32_RETAIL_ENC_RELEASE
IMG_ACCORD_U_GDR2_00_S_HTC_Europe_3.41.401.01_1.17b.32.19.14_15.62b.32_RETAIL_ENC_RELEASE
RUU_ACCORD_WR_GDR3_00_MR_HTCCN_CHS_CT_4.13.1401.03_0.21.70_RETAIL_ENC_RELEASE
Also talked with HTC live support, they have no idea of course.
Windows Phone Recovery Tool detects the phone, but can't offer any ROM.
Click to expand...
Click to collapse
same issue. I installed Windows insider and enrolled fast program. yesterday, phone noticed me have an update. I downloaded and wait 10 hours, but it's still "migrating data ..."
I press power then back button, I see lockscreen and unlimmited number of password length. the live tile screen so miscellaneous and several app not access (phone, mess, setttings, store ..). It says " need go to store ...".
terrible ... I've tryed newest Windows phone recovery tool 2.1.2. It detect my phone but say "no software package on server"
did you check http://forum.xda-developers.com/htc-8x/development/ruu-collection-t2916107
Isich said:
did you check http://forum.xda-developers.com/htc-8x/development/ruu-collection-t2916107
Click to expand...
Click to collapse
Those links are all offline -> 404 error
What about this topic the procedure should be similar to flash http://forum.xda-developers.com/showthread.php?t=2137556
it has link to official rom HTC_Europe_2.00.401.03 which is at http://www.androidruu.com/?developer=Accord
http://matboot.blogspot.bg/2015/02/officestockupromhtc8xACCORD.html
My phone does not want to recognize the image files on a pen drive when I hold the cam button. It just boots Windows normally.
EDIT: Managed to buy an y-cable and the rom flashed from the pen drive! Back to 8.1 again.
So, i got accepted to the nougat beta but i decided to hold off until later to install it. I finally decided to take the plunge and just to be sure i wiped my device and then installed it just to be sure that no problems arose.
After it installed i was greeted with the usual startup procedure but when it came to signing in there was no keyboard, only google voice typing which doesn't work for passwords. As a result i am now left with a phone with an unlocked bootloader and factory reset protection on without any way to get past setup (unless anyone knows a glitch/bug)
Any advice on the situation??
colliflower1107 said:
So, i got accepted to the nougat beta but i decided to hold off until later to install it. I finally decided to take the plunge and just to be sure i wiped my device and then installed it just to be sure that no problems arose.
After it installed i was greeted with the usual startup procedure but when it came to signing in there was no keyboard, only google voice typing which doesn't work for passwords. As a result i am now left with a phone with an unlocked bootloader and factory reset protection on without any way to get past setup (unless anyone knows a glitch/bug)
Any advice on the situation??
Click to expand...
Click to collapse
It happened the same to me!
I had to rollback to b131 and do the update again.
Check my thread here
ViCioPT said:
It happened the same to me!
I had to rollback to b131 and do the update again.
Check my thread here
Click to expand...
Click to collapse
Thank you SOOO much!!! It worked
colliflower1107 said:
Thank you SOOO much!!! It worked
Click to expand...
Click to collapse
No problem, just thank me pushing Thanks button on the thread
Enviado do meu FRD-L09 através de Tapatalk
That is strange. I wonder if this is due to a software issue.
ViCioPT said:
It happened the same to me!
I had to rollback to b131 and do the update again.
Check my thread here
Click to expand...
Click to collapse
Isn't it easier to just download an APK for a keyboard (E. g. Google keyboard, Swiftkey) and install that via ADB or push it to the phone and install it?
FreeLineTM said:
Isn't it easier to just download an APK for a keyboard (E. g. Google keyboard, Swiftkey) and install that via ADB or push it to the phone and install it?
Click to expand...
Click to collapse
I just installed a keyboard apk and it fixed that issue for me.
Similar issue
Just encountered a very similar problem, (sorry if I don't explain well enough, I'm a newbie with this stuff) with a uk L09 model.
I recently had to reinstall an app using adb due to compatibility issues preventing me from using it. due to a misunderstanding on my part, I believed I needed to install it to an external sd card, rather than the /sdcard/ directory, this came up with some errors that I'm still unsure of, specifically it claimed the sd card was read-only despite me still being able to conventionally copy a file onto it and then play it back, so I went about looking for how to make it writeable, all solutions to this pointed to rooting the phone, so I decided to try that, I got as far as unlocking the bootloader, and failed to flash, after much frustration, I re-read the original advice for the app and managed to install it successfully. because the original issue was resolved, I decided not to finish rooting as It turns out, I didn't need it.
The next day I went about trying to re-lock the bootloader, this worked, but when I hard reset it, it directs me through the login process, at which point, I cannot proceed because there is no keyboard available. I still have the default recovery, I can use fastboot but not regular adb, and I cannot get to settings. I tried unlocking again through fastboot, but it returned command not allowed, reading other guides, it seems my only option involves the rollback, but I don't currently have a microsd adapter to put files directly onto it without using the phone, I've ordered one, but I'm unsure if it will allow me to considering even fastboot continue returned (Remote: Command not allowed). so far I've had no luck in flashing anything, so I'm incredibly nervous that my phone's effectively bricked.
Thank you for reading
Rommco05 said:
If you have relocked bootloader can't fastboot and adb. Try download this zip. Make dload folder in root of your internal storage. Unzip files and pu to dload. Turn phone off and turn on with holding vol+/vol-/on,off buttons, this can may help
Click to expand...
Click to collapse
I can't access my phone's internal storage because it defaults to charge only, and does not allow me to change the access to enable file transfer because I cannot get past the login due to the lack of keyboard.
Rommco05 said:
So, anyway you will need sdcard
edit: u can't skip all settings?
Click to expand...
Click to collapse
No, it requires a google account which was previously synced, which I can't input, sadly. microsd reader has been ordered, will have to wait a little while though.
Hello guys, i bought my oneplus 7 pro from china and it comes with hydrogen os and i am trying to get rid of it.
I already tried to download the official package from OnePlus website and i tried to flash it using the recovery but it gives a pop up saying that i can't downgrade.
could anyone suggest me a good way to switch to oxygen os ??
Thanks in advance!!
Probably it's because they listed a lower version there.
Head to https://forum.xda-developers.com/oneplus-7-pro/how-to/oneplus-7-pro-global-repo-oxygen-os-t3930585
Download the latest zip and use the local upgrade method.
JJay666 said:
Probably it's because they listed a lower version there.
Head to https://forum.xda-developers.com/oneplus-7-pro/how-to/oneplus-7-pro-global-repo-oxygen-os-t3930585
Download the latest zip and use the local upgrade method.
Click to expand...
Click to collapse
I have tried to flash the latest version of GM21AA and GM21BA but i still face the same issue, even though hydrogen os is on version 9.5.3.GM21!
do you have any idea why i get the same issue ?
AhmedTaani96 said:
I have tried to flash the latest version of GM21AA and GM21BA but i still face the same issue, even though hydrogen os is on version 9.5.3.GM21!
do you have any idea why i get the same issue ?
Click to expand...
Click to collapse
Use fastboot mode : https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
Will definitely work
convert it with the international firmware converter
JJay666 said:
Use fastboot mode : https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
Will definitely work
Click to expand...
Click to collapse
I was checking the thread but i did not see anyone tried this method to change from hydrogen to oxygen, so i'm a bit confused whether to try it or not
joemossjr said:
convert it with the international firmware converter
Click to expand...
Click to collapse
how to do that ?
could you share with me the method or the link, thank you!
AhmedTaani96 said:
I was checking the thread but i did not see anyone tried this method to change from hydrogen to oxygen, so i'm a bit confused whether to try it or not
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-how-to-rebrand-device-t3852271
Usually flashing the stock zip via the systems updater should work but i guess if it doesn't then download the fastboot version and try.
JJay666 said:
https://forum.xda-developers.com/oneplus-6/how-to/oneplus-6-how-to-rebrand-device-t3852271
Usually flashing the stock zip via the systems updater should work but i guess if it doesn't then download the fastboot version and try.
Click to expand...
Click to collapse
okay i will try, hopefully it will not brick the device.
AhmedTaani96 said:
okay i will try, hopefully it will not brick the device.
Click to expand...
Click to collapse
Good luck, pretty sure it will be fine
JJay666 said:
Good luck, pretty sure it will be fine
Click to expand...
Click to collapse
Thanks mate, i hope so
AhmedTaani96 said:
Thanks mate, i hope so
Click to expand...
Click to collapse
If you're on a newer version of hydrogen, you need to unlock bootloader to go to a lower version. Dont forget. But might be better to wait for the next update of OSS and then flash internally. To be safe. Im rather new with oneplus too
JJay666 said:
If you're on a newer version of hydrogen, you need to unlock bootloader to go to a lower version. Dont forget. But might be better to wait for the next update of OSS and then flash internally. To be safe. Im rather new with oneplus too
Click to expand...
Click to collapse
i already unlocked the bootloader, but i don't want to risk everything so i will just wait for the newer update.
I have a follow up question. I might be wrong at any step so please correct me if I am.
From what I remember, during first boot of android people are supposed to log into their google account. So if I end up flashing OOS by local update option, will they ask me to log into my google account? I'm still in China and I don't know if I can actually skip that step and keep using my phone (log into google accounts later on after I connect to my VPN).
I don't want to risk changing OS and not being able to use my phone until I leave China.
Hoxter said:
I have a follow up question. I might be wrong at any step so please correct me if I am.
From what I remember, during first boot of android people are supposed to log into their google account. So if I end up flashing OOS by local update option, will they ask me to log into my google account? I'm still in China and I don't know if I can actually skip that step and keep using my phone (log into google accounts later on after I connect to my VPN).
I don't want to risk changing OS and not being able to use my phone until I leave China.
Click to expand...
Click to collapse
Yes you can, take out SIM and do not sign in to wifi and just skip it. BTW which VPN are you using? DM me please
Hoxter said:
I have a follow up question. I might be wrong at any step so please correct me if I am.
From what I remember, during first boot of android people are supposed to log into their google account. So if I end up flashing OOS by local update option, will they ask me to log into my google account? I'm still in China and I don't know if I can actually skip that step and keep using my phone (log into google accounts later on after I connect to my VPN).
I don't want to risk changing OS and not being able to use my phone until I leave China.
Click to expand...
Click to collapse
Lucky you, how did you install OOS i think you did not update hydrogen os and you were able to install OOS.
BTW are you in Tianjin ?? i am living there..
AhmedTaani96 said:
Lucky you, how did you install OOS i think you did not update hydrogen os and you were able to install OOS.
BTW are you in Tianjin ?? i am living there..
Click to expand...
Click to collapse
So far I did not install OOS. My H2OS is too fresh and I still need to wait a bit for new OOS updates. However I'm getting 2nd one for my grandfather tomorrow and I'll check how it goes then.
Yes, I'm in TJ.
Hoxter said:
So far I did not install OOS. My H2OS is too fresh and I still need to wait a bit for new OOS updates. However I'm getting 2nd one for my grandfather tomorrow and I'll check how it goes then.
Yes, I'm in TJ.
Click to expand...
Click to collapse
Finally, I managed to install OOS and it is amazing.
I am studying in Tianjin but I just left for my summer holiday.
Hello. My problem with this tablet started after updating android to 5.0 from 4.4 kitkat. I kept popping up problems with google services. I decided to hard reset but it didn't help. Then I uploaded the new firmware via flash tool. Unfortunately, the same problem continues. I think the problem is that this Lenovo is MT: 60077 and everywhere available softs and TWRP are up to MT: 8127. Someone will tell me how to bring this tablet to life? Recorvery mode doesn't help either.
1. The picture shows the popup that won't disappear:
https://imgur.com/ROqvwNX
2. The photo in Chinese shows the hard reset option:
https://imgur.com/TIt7oMP
3. I tried wipe data / factory reset and wipe cache partition but still to no avail:
https://imgur.com/NeV924q
You updated from Android 4.4 to Android 5 via sp flash tool??
ineedroot69 said:
You updated from Android 4.4 to Android 5 via sp flash tool??
Click to expand...
Click to collapse
The tablet is friends, she asked me to repair. No. As far as I know, an update was displayed to my friend and she downloaded and installed it.
Damian92ACM said:
The tablet is friends, she asked me to repair. No. As far as I know, an update was displayed to my friend and she downloaded and installed it.
Click to expand...
Click to collapse
so your friend downloaded an OTA update while rooted then experience this issues?
ineedroot69 said:
so your friend downloaded an OTA update while rooted then experience this issues?
Click to expand...
Click to collapse
I will say this. I don't know exactly what it was like. What she was telling me was the original system was 4.4 KitKat but Lenovo has imposed the 5.0 Lollipop update. I also know that this tablet was on the site because the charging socket was replaced. However, it seems to me that someone flashed this tablet. In my opinion, someone threw the software for the MT8127 version instead of the MT60077. That is why such a problem arose. I myself cannot find the software for MT60077 because I think it would solve the problem.
Damian92ACM said:
I will say this. I don't know exactly what it was like. What she was telling me was the original system was 4.4 KitKat but Lenovo has imposed the 5.0 Lollipop update. I also know that this tablet was on the site because the charging socket was replaced. However, it seems to me that someone flashed this tablet. In my opinion, someone threw the software for the MT8127 version instead of the MT60077. That is why such a problem arose. I myself cannot find the software for MT60077 because I think it would solve the problem.
Click to expand...
Click to collapse
have you tried going to recovery mode and choosing "root integrity check"
ineedroot69 said:
have you tried going to recovery mode and choosing "root integrity check"
Click to expand...
Click to collapse
I just tried it and it scanned everything but what next?
When finished, it says: System check SUCCESS !!
every application you run are show that error has stop?
ineedroot69 said:
every application you run are show that error has stop?
Click to expand...
Click to collapse
I mean, how do you start the tablet? Because when I fire after flashing, when choosing the language, as in picture 1. I will not do anything because the information pops up like in the picture and under it about google. I can click and click ok but it does not disappear.
Damian92ACM said:
I mean, how do you start the tablet? Because when I fire after flashing, when choosing the language, as in picture 1. I will not do anything because the information pops up like in the picture and under it about google. I can click and click ok but it does not disappear.
Click to expand...
Click to collapse
ohh i didn't notice the 1st screenshot its actually the first setup process that ask for OS language ... this is just my guess but you provably "corrupted" your build.prop now applications are thinking they are running on Android 4.4 but while actually running Android 5.0 try restoring your build.prop
i experience that i use build.prop editor that i downloaded from playstore and change my Android version to 5 and every application keep stop working my solution is to flash full stock rom again
ineedroot69 said:
ohh i didn't notice the 1st screenshot its actually the first setup process that ask for OS language ... this is just my guess but you provably "corrupted" your build.prop now applications are thinking they are running on Android 4.4 but while actually running Android 5.0 try restoring your build.prop
Click to expand...
Click to collapse
And how to do it? Would you give me some link to explain how to do it?
Damian92ACM said:
And how to do it? Would you give me some link to explain how to do it?
Click to expand...
Click to collapse
well all your application installed are crashing even the playstore itself if you manage to run it right? i guess if you have TWRP installed you can restore it or just go full YOLO and flash full stock rom
ineedroot69 said:
well all your application installed are crashing even the playstore itself if you manage to run it right? i guess if you have TWRP installed you can restore it or just go full YOLO and flash full stock rom
Click to expand...
Click to collapse
The problem is that this tablet doesn't have TWRP installed. I tried this for MT8127 via flash tool but it kept getting "enable dram failed" error.
Damian92ACM said:
The problem is that this tablet doesn't have TWRP installed. I tried this for MT8127 via flash tool but it kept getting "enable dram failed" error.
Click to expand...
Click to collapse
your playstore show has stop working too??
ineedroot69 said:
your playstore show has stop working too??
Click to expand...
Click to collapse
I will not tell you this because how would I know if I can not even let go of the installation from the beginning because this error keeps popping up hehe.
I will still look for a solution. If it's not hard, he will go back to the cupboard and stay there hehe
i forgot to say try booting your device as safe mode
ineedroot69 said:
i forgot to say try booting your device as safe mode
Click to expand...
Click to collapse
I will try. Maybe it will work.
ineedroot69 said:
i forgot to say try booting your device as safe mode
Click to expand...
Click to collapse
Unfortunately, it didn't help. I fire up safe mode. The laptop is rooted and restarts. When choosing a language, these errors still pop up.