Database Info

[Q] Samsung Omnia 7 with 7003 build

hi all,
I bought a samsung omnia 7 from ebay and it's got the 7003 build.
the nodo update didn't came till now. I've tried all the posibilities to update to nodo , but no luck. i've observed that most of the posibilities to update are for the build 7004. is there a way to install build 7004 on my phone?
thanks.

Did you try the special upgrade tool Microsoft just released a few days ago? I thought that was designed for this purpose.

check out the stick thread named "get nodo right now" or something like that
worked for my omnia

i've tried every posibility except the rom tools and still no update.
i cannot do anything with the method from thread "get nodo right now" because when I start the command application I select a language and after that the applications exits without any message.
Do you think that if I install another ROM with this method : http://forum.xda-developers.com/showthread.php?t=973420 .. it will help me?

snasninja said:
i've tried every posibility except the rom tools and still no update.
i cannot do anything with the method from thread "get nodo right now" because when I start the command application I select a language and after that the applications exits without any message.
Do you think that if I install another ROM with this method : http://forum.xda-developers.com/showthread.php?t=973420 .. it will help me?
Click to expand...
Click to collapse
You are in a much better position than the rest of us 7003ers. Fortunately, there have been Omnia 7 rom leaks so you should be able to easily flash any 7004 rom; from there you can go on to NoDo with minimum problems.

i will try to flash a new rom and see what hapens..
Thanks

i've tried to flash a rom with the WP7 downloaded application but it says "not a retail device".
any solutions?

snasninja said:
i've tried to flash a rom with the WP7 downloaded application but it says "not a retail device".
any solutions?
Click to expand...
Click to collapse
http://support.microsoft.com/kb/2530409

i've tried that too..
the message is:
The phone is not in the 'Connect to PC' state. Please, make sure that you follow the instructions and your phone shows the 'Connect To PC' image

Microsoft Update
Try the Update that Microsoft just made, it works for me

ulquiorra01 said:
Try the Update that Microsoft just made, it works for me
Click to expand...
Click to collapse
did you were in the same situation? build 7003?
what update microsoft just made?

Hello.. seems I am in the same boat with a HTC device I purchased off ebay.
After some googling it looks like ive got a pre release build.
Microsoft support tool released a couple of days ago does not detect the phone.
The command line update tool stops running after selecting the phone language.
Trying to work out some work around to fool the software in thinking there is a newer build on the phone.. somewhere in the registry?

jsv_90 said:
Hello.. seems I am in the same boat with a HTC device I purchased off ebay.
After some googling it looks like ive got a pre release build.
Microsoft support tool released a couple of days ago does not detect the phone.
The command line update tool stops running after selecting the phone language.
Click to expand...
Click to collapse
I'm having the exact same problem with a Samsung Focus.
-Bought it on eBay, and don't live in the US - so I can't bring it to an AT&T store.
-Won't detect updates via Zune
-Windows Phone Support Tool doesn't recognise that the phone is in the "connect to PC" state
This really blows. To top if off, there are no ROMs available for the Focus yet. I think I'll just have to wait until they become available.

dstreefkerk said:
I'm having the exact same problem with a Samsung Focus.
-Bought it on eBay, and don't live in the US - so I can't bring it to an AT&T store.
-Won't detect updates via Zune
-Windows Phone Support Tool doesn't recognise that the phone is in the "connect to PC" state
This really blows. To top if off, there are no ROMs available for the Focus yet. I think I'll just have to wait until they become available.
Click to expand...
Click to collapse
Are you sure you don't have a stolen demo phone?
Sent from my SGH-i917 using XDA Windows Phone 7 App

munkeyphyst said:
Are you sure you don't have a stolen demo phone?
Click to expand...
Click to collapse
Quite sure. The phone isn't stuck in demo mode. It works perfectly otherwise.

dstreefkerk said:
Quite sure. The phone isn't stuck in demo mode. It works perfectly otherwise.
Click to expand...
Click to collapse
Read here: http://forum.xda-developers.com/showthread.php?t=982626
Sent from my SGH-i917 using XDA Windows Phone 7 App

munkeyphyst said:
Read here: http://forum.xda-developers.com/showthread.php?t=982626
Sent from my SGH-i917 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
I already said my phone wasn't a stolen/demo device.

dstreefkerk said:
I'm having the exact same problem with a Samsung Focus.
-Bought it on eBay, and don't live in the US - so I can't bring it to an AT&T store.
-Won't detect updates via Zune
-Windows Phone Support Tool doesn't recognise that the phone is in the "connect to PC" state
This really blows. To top if off, there are no ROMs available for the Focus yet. I think I'll just have to wait until they become available.
Click to expand...
Click to collapse
Yes! I'm finally off 7003, thanks to the ROM posted in the Focus developer section. I initially viewed it with scepticism as nobody else had success with it, but then again, nobody else was having the same problem as me - a Focus stuck on 7003.
My phone must be a developer device. I didn't even know that developer Focuses (Focii?) existed. The ROM shows up in WP7 Downloader as "WP7_ENGINEER", and users with retail devices couldn't flash with that image.
PavelX1 said:
one for Retail Devices that are signed by "WP7_PRODUCT" and one for Developer Devices - signed by "WP7_ENGINEER"
Click to expand...
Click to collapse
I've now moved from 7003 to 7390 thanks to the ROM flash procedure. It worked flawlessly.
Thanks so much for sharing the ROM, PavelX1!

[Q] I cant update my HTC TITAN to 8773.

Hello.
I cant update my HTC TITAN to 8773.
I have tried the disconnect trick and successfully update to 8112.
But when i to the trick again and get the update 8773 the update fails when Zune at step 7 fails to backup the phone. Nothing happans and finally the phone reboots and says that the update fails.
I have tried on 3 differint computors but no luck.
When i try the cab method (if I understoud it correctly) I also get failed.
Se print for error code. It says that I dont got any space on the phone but I have plenty 8gb free. I have also tried to reset ´phone to factory defaults but the same error. What to do?
Error:800705B4
And now when I open som installed appz on the phone nothing happens, only get a black screen and I have to press the "back" buttom in order to get the the program to start correctly.

Try installing this update: http://www.htc.com/www/help/htc-titan/#download
It is meant to fix the Zune updating errors for the HTC Titan

AndyFZ1S said:
Try installing this update:
It is meant to fix the Zune updating errors for the HTC Titan
Click to expand...
Click to collapse
Thx for the tip, I have tried it but there is still no change when i Try to install update after that I have installed this fix.
Still the phone dosent backup the phone in step 7 and then restarts and says update fail. Any other tip?

The only thing I can think of doing is to try and roll back to the previous version via Zune, No guarantees though, Sorry I cannot help other than that :-(
Is your phone a Branded Carrier handset? ie: at&t ? I would imagine if it is then at&t will have their own version of the update which of course you will have to wait for them to push it to your phone.

AndyFZ1S said:
The only thing I can think of doing is to try and roll back to the previous version via Zune, No guarantees though, Sorry I cannot help other than that :-(
Is your phone a Branded Carrier handset? ie: at&t ? I would imagine if it is then at&t will have their own version of the update which of course you will have to wait for them to push it to your phone.
Click to expand...
Click to collapse
When i Check zune I have no restore point
No my phone is not Branded (if you mean that my phone is looked to a cirten operator?).
I see that other members have succeeded with htc titan, what makes my phone so different
Can I get some kind of standard bakup from somwere?

Now that's a bummer, Strange there is no option to revert back to 8112 or even 8107, Did you hard reset after 8112? maybe worth a try.
Check the Titan (2011) forums and use search if you cannot find anything relevant.

AndyFZ1S said:
Now that's a bummer, Strange there is no option to revert back to 8112 or even 8107, Did you hard reset after 8112? maybe worth a try.
Check the Titan (2011) forums and use search if you cannot find anything relevant.
Click to expand...
Click to collapse
Its the version 8112 i got installed, but no option to revert to older version or previesly backup.
I have tried the hard reset 3 times allready but no luck
The phone also acts strange when i open apps, nothing happens only black background you then need to press back in order for the app to respond and open the program.
Ohh whant to have the old mango again
I have tried serching and found some problem look alike but no sollutions.
Edit: I have now installed "Dynamics7 v1.21 - Tango 8779, Full unlock" instead and the phone works nicely and is very fast

[Q] p920 debrand ?

Hi. Please could somebody help me. I have a UK model from orange. It's now unlocked but has orange bloatware. I have searched the forums for a debrand method but only found one, and that only works with win xp.
Is there any way to unbrand this phone with windows 7. Orange did not support this phone and it's still stuck on android 2.2.2.
Thanks in advance

miniyon said:
Hi. Please could somebody help me. I have a UK model from orange. It's now unlocked but has orange bloatware. I have searched the forums for a debrand method but only found one, and that only works with win xp.
Is there any way to unbrand this phone with windows 7. Orange did not support this phone and it's still stuck on android 2.2.2.
Thanks in advance
Click to expand...
Click to collapse
AFAIK by installing any custom ROM your phone will be unbranded.

me2freedom said:
AFAIK by installing any custom ROM your phone will be unbranded.
Click to expand...
Click to collapse
Thanks for the reply. I'm after an original LG firmware though.

miniyon said:
Thanks for the reply. I'm after an original LG firmware though.
Click to expand...
Click to collapse
Have you tried updating your phone through EMERGENCY mode in LGFlashTool? Maybe you'll get stock ICS / JB because the branded ones are not made by LG?

03D
me2freedom said:
Have you tried updating your phone through EMERGENCY mode in LGFlashTool? Maybe you'll get stock ICS / JB because the branded ones are not made by LG?
Click to expand...
Click to collapse
Wow, i had no idea ? Who made them ?
How do i go about the process ? To be honest, i'm quite nervous about doing it. I've unbranded a number of phones in the past but this a tad more complicated.
I really appreciate that you have continued to be of help. Thankyou !

miniyon said:
Wow, i had no idea ? Who made them ?
How do i go about the process ? To be honest, i'm quite nervous about doing it. I've unbranded a number of phones in the past but this a tad more complicated.
I really appreciate that you have continued to be of help. Thankyou !
Click to expand...
Click to collapse
Could you try this?
I've done it a few times myself, with succes, and I think this is the way I've managed it.
*This asumes you've installed
Follow this on the official LG site: http://www.lg.com/uk/support-mobile/lg-LGP920 , and go to the tab "software update".
But instead of just updating your phone do this: Click on User/Support (above) then emergency mode, insert your IMEI and click on check

?
It didn't work i'm afraid. What's really odd is that the phone is on froyo 2.2.2 and the OTA update from the phone says there's no update available. Yet the lg update tool tells me an update is available yet after it has downloaded and about to 'install' it stops and says that the update cannot continue because a 'fatal error' has occured ?
Very odd. I'm guessing the orange bloatware is the problem. I HATE orange !
Edit. Ok, i just installed all the flashing tools to my pc (win 7) But when i open flash tool a window appears saying 'lg usb/parallel key is not detected. i'm also asked for a password and id ?

miniyon said:
It didn't work i'm afraid. What's really odd is that the phone is on froyo 2.2.2 and the OTA update from the phone says there's no update available. Yet the lg update tool tells me an update is available yet after it has downloaded and about to 'install' it stops and says that the update cannot continue because a 'fatal error' has occured ?
Very odd. I'm guessing the orange bloatware is the problem. I HATE orange !
Edit. Ok, i just installed all the flashing tools to my pc (win 7) But when i open flash tool a window appears saying 'lg usb/parallel key is not detected. i'm also asked for a password and id ?
Click to expand...
Click to collapse
If you follow this guide you know you got al the right settings: http://www.technopat.net/forum/andr...lg-optimus-3d-ultimate-flash-guide-print.html , it also has pictures to help you, and get the firmware from: http://forum.xda-developers.com/showthread.php?t=2217180

no crack
me2freedom said:
If you follow this guide you know you got al the right settings: http://www.technopat.net/forum/andr...lg-optimus-3d-ultimate-flash-guide-print.html , it also has pictures to help you, and get the firmware from: http://forum.xda-developers.com/showthread.php?t=2217180
Click to expand...
Click to collapse
I downloaded everything but there was no crack included for the flashtool and no .dll file to enter into the flashtool ? it certainly looks incomplete so did not help at all.
Do i really have to keep entering an image verification everytime i need to reply on my own thread ? Seems so daft.

If it is rooted you can delete almost anything you want.

?
drastic00 said:
If it is rooted you can delete almost anything you want.
Click to expand...
Click to collapse
I don't quite follow ? I don't need to delete anything. I'm trying to flash the phone to an updated version of android. I have a UK orange branded p920 3D but it's on froyo 2.2.2 and won't update any further.

I thought you were wanting to delete bloatware. If you want ICS you can try my tutorial
http://forum.xda-developers.com/showthread.php?p=39269819

flash
drastic00 said:
I thought you were wanting to delete bloatware. If you want ICS you can try my tutorial
http://forum.xda-developers.com/showthread.php?p=39269819
Click to expand...
Click to collapse
Funnily enough i tried your method first. The flashtool kept asking for an id and password so i could not continue. Where do i find the id and password ? that was with flashtool 1.1 running on win 7

Copy the indicated file over the original as instructed or use 1.2 if you want. You also have to run the installer before using it...It might be a good idea to run it in xp sp3 compatibility mode.

dll
The link for downloading the p920 .dll file is broken. Is it available anywhere else ?

Thanks for telling me, I'll repost it...
In the mean time you could try this. It's not my link, though
http://d-h.st/Kmp
Hey, link is working. Dev Host must have been down for service.

U should first delete imei if the carrier is locked
Sent from my Nexus 4 using xda app-developers app

link
drastic00 said:
Thanks for telling me, I'll repost it...
In the mean time you could try this. It's not my link, though
http://d-h.st/Kmp
Hey, link is working. Dev Host must have been down for service.
Click to expand...
Click to collapse
Thanks drastic00. I've downloaded the link :good:

not working
I've now tried all methods and nothing works. The furthest i have got so is to hit the yellow start button on the flash tool, but the port does not become ready. I have followed all instructions to the letter.

Recheck step 1 details carefully. Be sure antivirus and Defender are off when downloading and decompressing. It won't start until drivers are installed correctly.
You should see the devices in device manager with no 'blinking' of the omap device, and LG CDMA USB SERIAL, on which you change the port number to 41. Then you are ready to flash.
That part is fiddly.

[FIXED] Flashing Issues with Security Unlocked / Not For Resale phone (Error [340])

UPDATE:
I managed to fix it by first running the ACDU fix and then installing the European RUU over it! It even updates now!!
ACDU.exe (click the button on the right to download)
Released RUUs for HTC 8X (make sure to get one that corresponds to your device!)
KEEP IN MIND THAT THIS HAS WORKED FOR ME AND MY SECURITY UNLOCKED DEVICE,
THERE IS NO GUARANTEE THAT IT WILL WORK FOR YOU
IF YOU BRICK YOUR DEVICE, IT'S ON YOU.​
Steps:
Put your device in the bootloader screen by powering it off, and then turning it back on while holding the vol up + vol down buttons simultaneously.
Connect the device to your computer and let Windows locate and install the driver needed. Wait until the driver is fully installed and/or you can see the word USB written on the bootloader screen.
Run the ACDU.exe file and let it do its job (This supposedly unbrands your phone!). It should restart a couple of times showing a green screen and then eventually go into the bootloader menu. It might say something like "UEFI for Key Provision ONLY" in red letters, ignore that.
Run the RUU you've downloaded and if everything goes as planned it should flash correctly. If not, make sure you've downloaded the correct RUU for your device and that it's not corrupted.
Enjoy your (unbricked and) updatable security unlocked device.
I hope this helps!!
Source used (it's in chinese): http://bbs.lumwp.com/thread-133710-1-1.html
---------------------------------------------------------------------------------------
Hello,
I have an HTC 8X that appears to be security unlocked and therefore could not receive updates.
In my infinite wisdom, I decided to try to flash the European RUU that has been released in the internet, hoping it would allow me to update the phone further. I did not proceed unprepared and I did indeed check that the phone was European (it initially had the OS version: 2.00.401.03) so it looked as if everything matched.
However, after starting the update, RUU flashed some UEFI related files and then the phone restarted. It started up and resumed the main firmware flashing process, stopping at the 1% mark and restarting back the bootloader.
The error code reported by RUU is the following:
Error [340]: ENCSS_VERIFY_ERROR
SSD Error, please flash subsystem does not encrypted image
The error message is kinda incoherent and I can't find anything about it (except in a thread in XDA, where someone states that this might be because I need an American firmware?), what's worse is that I'm left with a soft-bricked device that I can do nothing with since it can only boot to the bootloader.
The device is unlocked, unbranded and security unlocked (CID: 11111111), yet I'm still stuck.
If I try to flash only the UEFI stuff (by removing the RUU .nbh from the directory), the device is then able to boot to the HTC logo and get into the dual gear screen, where it gets stuck. The hard reset option does not seem to work at all, the phone restarts at the HTC logo if I keep the vol down button pressed. Strangely, I can get into the lightning screen but I dunno what that might do.
Did I mention that the device cannot shutdown? Yeah... It only restarts...
Does anyone know any way to fix this? Or why this might be occuring?
Click to expand...
Click to collapse

I've managed to fix it and I've included the solution in my first post. I hope this helps.

This just skips the CID check.
You can also change the CID by command to like HTC__001 and get the OTA's and be able to install RUU's the normal way.

help
xmoo said:
This just skips the CID check.
You can also change the CID by command to like HTC__001 and get the OTA's and be able to install RUU's the normal way.
Click to expand...
Click to collapse
i have a 8x(620e) bricked after updating wp8.1.It booted after updated but auto bootboop before wp8.1 gui.I try to hard reset,it can not help.So i try to flash it.but it says image version ledd than device version.Can you help me?Thanks.

fengsam said:
i have a 8x(620e) bricked after updating wp8.1.It booted after updated but auto bootboop before wp8.1 gui.I try to hard reset,it can not help.So i try to flash it.but it says image version ledd than device version.Can you help me?Thanks.
Click to expand...
Click to collapse
Nope I can't. I'm new in the Windows Phone world. I'm a Android pro

help
Potis20 said:
UPDATE:
I managed to fix it by first running the ACDU fix and then installing the European RUU over it! It even updates now!!
ACDU.exe (click the button on the right to download)
Released RUUs for HTC 8X (make sure to get one that corresponds to your device!)
KEEP IN MIND THAT THIS HAS WORKED FOR ME AND MY SECURITY UNLOCKED DEVICE,
THERE IS NO GUARANTEE THAT IT WILL WORK FOR YOU
IF YOU BRICK YOUR DEVICE, IT'S ON YOU.​
Steps:
Put your device in the bootloader screen by powering it off, and then turning it back on while holding the vol up + vol down buttons simultaneously.
Connect the device to your computer and let Windows locate and install the driver needed. Wait until the driver is fully installed and/or you can see the word USB written on the bootloader screen.
Run the ACDU.exe file and let it do its job (This supposedly unbrands your phone!). It should restart a couple of times showing a green screen and then eventually go into the bootloader menu. It might say something like "UEFI for Key Provision ONLY" in red letters, ignore that.
Run the RUU you've downloaded and if everything goes as planned it should flash correctly. If not, make sure you've downloaded the correct RUU for your device and that it's not corrupted.
Enjoy your (unbricked and) updatable security unlocked device.
I hope this helps!!
Source used (it's in chinese): http://bbs.lumwp.com/thread-133710-1-1.html
---------------------------------------------------------------------------------------
Click to expand...
Click to collapse
could you list your bootloader message?

fengsam said:
could you list your bootloader message?
Click to expand...
Click to collapse
Well, after updating to GDR3, it seems that the bootloader messages have changed.
As of right now, it says
Security Unlocked
PM2320001 P S WP8 I (Before flashing ACDU, I think it used to be only "PM230001")
SBL1-1.0.21009.0
SBL2-1.0.21009.0
SBL3-1.0.21009.0
RPM-1.1.03078.0
TZ-303.000.241
UEFI-0.0.3030.0(175731) (Before updating, it used to be something like "15****", where * = numbers)
OS-4.12.401.01 (Before updating, it used to be 2.00.401.03)
CID-11111111
Radio-1.20b-32-19.04_15.67b.32.19 (Before flashing/updating, it used to be something like "1.11b.32.19.23")
fengsam said:
i have a 8x(620e) bricked after updating wp8.1.It booted after updated but auto bootboop before wp8.1 gui.I try to hard reset,it can not help.So i try to flash it.but it says image version ledd than device version.Can you help me?Thanks.
Click to expand...
Click to collapse
Ah, that's unfortunate. I don't know of a way to bypass the version check. =/ I don't understand why they're making things so difficult for end users. If you're flashing a full ROM, then you don't care what the previous one was... The only thing I can think of is that maybe on each update they blow a fuse so that you can't go back, like on the Xbox360
xmoo said:
This just skips the CID check.
You can also change the CID by command to like HTC__001 and get the OTA's and be able to install RUU's the normal way.
Click to expand...
Click to collapse
How would I go around doing that?

Potis20 said:
Well, after updating to GDR3, it seems that the bootloader messages have changed.
As of right now, it says
Security Unlocked
PM2320001 P S WP8 I (Before flashing ACDU, I think it used to be only "PM230001")
SBL1-1.0.21009.0
SBL2-1.0.21009.0
SBL3-1.0.21009.0
RPM-1.1.03078.0
TZ-303.000.241
UEFI-0.0.3030.0(175731) (Before updating, it used to be something like "15****", where * = numbers)
OS-4.12.401.01 (Before updating, it used to be 2.00.401.03)
CID-11111111
Radio-1.20b-32-19.04_15.67b.32.19 (Before flashing/updating, it used to be something like "1.11b.32.19.23")
Ah, that's unfortunate. I don't know of a way to bypass the version check. =/ I don't understand why they're making things so difficult for end users. If you're flashing a full ROM, then you don't care what the previous one was... The only thing I can think of is that maybe on each update they blow a fuse so that you can't go back, like on the Xbox360
How would I go around doing that?
Click to expand...
Click to collapse
Your message is same with mine.http://forum.xda-developers.com/showthread.php?t=2722104

fengsam said:
Your message is same with mine.http://forum.xda-developers.com/showthread.php?t=2722104
Click to expand...
Click to collapse
Well, unless we can find a way to bypass the OS version check set by HTC (or MS?), I guess you're stuck. =(
I was thinking of updating to 8.1 but after the whole ordeal above, I said "**** it, I'll get it when it's updatable! I'm not taking the change of bricking it again.."
..This captcha thing is starting to get very annoying...

Potis20 said:
Well, unless we can find a way to bypass the OS version check set by HTC (or MS?), I guess you're stuck. =(
I was thinking of updating to 8.1 but after the whole ordeal above, I said "**** it, I'll get it when it's updatable! I'm not taking the change of bricking it again.."
..This captcha thing is starting to get very annoying...
Click to expand...
Click to collapse
I think the OS version check set by htc.Because htc8s can still downgrade by reflashing ruu.I am very happy to update wp8.1,but bricked.

@Potis20 Can you re-upload the ACDU.exe file? The link says the file was removed...

Can someone upload ACDU.exe fix file again??
I have HTC wp 8x from O2 and i try to unlock with your instructions :good:

Threshergr said:
Can someone upload ACDU.exe fix file again??
I have HTC wp 8x from O2 and i try to unlock with your instructions :good:
Click to expand...
Click to collapse
I don't have the ACDU file but I was able to unlock my phone using the ACDU_UEFI_PROV_KEY.nbh file.
1. Download ACDU_UEFI_PROV_KEY https://mega.co.nz/#!UlMS1CyQ!rX-5-U6mmBHncVw6etFYeuSuV-OLX1De-jgkgEGf6FU
2. Put the ACDU file in the same directory as the ROMUpdateUtility (move the other .nbh files to another folder)
3. Run ROMUpdateUtility.exe
4. Phone should flash and unlock
5. Delete the ACDU_UEFI_PROV_KEY file
6. Move the UEFI_signed.nbh and RUU_signed.nbh files back
7. Run ROMUpdateUtility.exe again to flash ROM

Can someone upload ACDU.exe fix file again??
please !!!!!!!!!!!!!!

Same issue with HTC 8x Security Unlocked CID 1111111
Error [340]: ENCSS_VERIFY_ERROR
can you share your complete files package here?
thanks

i have downloaded latest nbh files for my HTC 8X by using windows device recovery tool and use the flash utility with nbh files as u said still no results. get the error : 340 encss verify error
SSD Error Please Flash subsystem does not encrypted image

Cannot restore to stock using Mobile Upgrade Q.

Hi! I have a Idol 3 (6045I variant) and everytime I try to restore to stock using Mobile Upgrade Q it gets to the part where it says "Searching the server for latest available software" then the phone turns on normally and it says "Download update software package failed. Please check your internet connection." and it does this on two computers that I have tried with two different upgrade Q versions. Could someone please help me identify the problem?

It seems Alcatel abandoned our device.

It seems Alcatel abandoned our device.
Ha, ha...
Look the reason you are getting the message is because you restored your phone once on IP 240.4.4.xx.x.xx.xx. If you use another IP address you would not get that message. So, use a vpn or change you IP or use someone else's internet connection. It has happened to me more then once and was very frustrating as until I figured it out. Go to google and type in "What is my IP address" and start their.
HEY OFF TOPIC but can you believe that XPOSED is finally released for Nougat!!!!

vq8acsxht said:
It seems Alcatel abandoned our device.
Ha, ha...
Look the reason you are getting the message is because you restored your phone once on IP 240.4.4.xx.x.xx.xx. If you use another IP address you would not get that message. So, use a vpn or change you IP or use someone else's internet connection. It has happened to me more then once and was very frustrating as until I figured it out. Go to google and type in "What is my IP address" and start their.
HEY OFF TOPIC but can you believe that XPOSED is finally released for Nougat!!!!
Click to expand...
Click to collapse
This doesn't seem to be the case because even after using a different internet connections and a vpn it still throws out an error message and after updating to a newer version of upgrade q it says "There is no greater version available to upgrade your phone" which doesn't make any sense.

chewyboy0 said:
This doesn't seem to be the case because even after using a different internet connections and a vpn it still throws out an error message and after updating to a newer version of upgrade q it says "There is no greater version available to upgrade your phone" which doesn't make any sense.
Click to expand...
Click to collapse
Good, it says "There is no greater version available to upgrade your phone" now do a factory reset of the phone. If you did not destory the recovery partition you should be good to go.

chewyboy0 said:
Hi! I have a Idol 3 (6045I variant) and everytime I try to restore to stock using Mobile Upgrade Q it gets to the part where it says "Searching the server for latest available software" then the phone turns on normally and it says "Download update software package failed. Please check your internet connection." and it does this on two computers that I have tried with two different upgrade Q versions. Could someone please help me identify the problem?
Click to expand...
Click to collapse
Use this program here ...
https://mega.nz/#!9UdDGJLI!9S87X0wH0OEc3nKSd7dZHCES7RpDW8iWpPnPSqCPLzs (I'm trying to think of how this goes by memory so bare with me)
make sure you have the drivers installed. extract the file and the password is in the txt file. I can't remember the exact steps, but I think it will do some type of update or you go to "get version" if you don't see 6045 in the device list. once it's there you can go to the grey box besides get version that says update or download or something. my brain heh I can't remember, but then you click that and it will bring you back to stock. I did it on my 6045O flawlessly. It brought me right into the latest update. also if you go into the program files and go to the Sugar software folder after it's downloading the latest firmware for your phone and you go to the bin folder you should see a downloaded folder with your model number plus some other numbers and letters. copy that to your desktop. once that's done find the file starting with "R" that is the recovery image. delete that and replace it with twrp recovery image and just name it recovery. go back into the main Sugar folder in the program files and replace the folder with your model number with that folder. you also see a folder named download. that is the downloaded firmware you can delete that folder and just leave the modded folder with your model number containing the twrp recovery image. meanwhile, go through the setup process on your phone and skip all the steps you can and go into the phone. go to the about device and tap on the build number to unlock the developer options. make sure the OEM bootloader unlock is toggled and I just changed the usb debugging also although I don't think that's necessary. go back into the Sugar program and then go to just the update or whatever it is beside the get version and click that and it will update the phone with the latest firmware and it will put the custom recovery on it. make sure once it's done downloading you unplug it and turn it off then go into recovery mode by holding the power down and volume up until the main logo comes up then let go of power and keep holding volume up until twrp boots up. make sure you already have the latest SuperSU zip on your sdcard. go to the terminal or sometimes one comes up from the beginning and enter the systemless supersu line/code or whatever you call it and then hit enter or if it will go straight into twrp first do a factory reset in the advanced wipe tab then the systemless supersu terminal line code and then install the supersu zip. that's it. your back to the latest firmware and rooted. oh and btw, I forgot if you have to be in download mode when you are using the Sugar program. I play around in several phones so forgot at the moment. If you need to go into download mode just plug in the usb as your holding power, volume up and down at the same time and then when it goes into the download mode screen hold volume up for 5-10 seconds until the screen goes black. I hope it helps and sorry if any of this is confusing. It can be a bit advanced for some.

Mobile Q doesnt work here too.
With or Without VPN cant download the update package :/

irinae said:
Mobile Q doesnt work here too.
With or Without VPN cant download the update package :/
Click to expand...
Click to collapse
Press and hold the Volume up button, then briefly press the Power button. Keep pressing the Volume up button. Scroll to the desired language using the Volume down button, then press the Power button. Scroll to wipe data/factory reset by pressing the Volume down button.
Then try to do an update OTA.
If you are running stock and have for the last 6 months or so, their are not any new updates???
Just curious why you would think their is an update??
Also, "There is no greater version available to upgrade your phone" chewyboy0 admitted that Mobile Q software does work because Mobile Q software had to go out to the Alcatel servers to check which version he had.
Finally, Also, you gave no reference of whether you are running stock ROM, Rooted?? TWRP?? or for that matter whether you Samsung Galaxy phone can be plugged into the Mobile Q software. In other words, your coming up a little short on details.

I am running a custom ROM and I wanted to go back to stock for various reasons but I will try one of the methods above.

Brian9285 said:
Use this program here ...
https://mega.nz/#!9UdDGJLI!9S87X0wH0OEc3nKSd7dZHCES7RpDW8iWpPnPSqCPLzs (I'm trying to think of how this goes by memory so bare with me)
make sure you have the drivers installed. extract the file and the password is in the txt file. I can't remember the exact steps, but I think it will do some type of update or you go to "get version" if you don't see 6045 in the device list. once it's there you can go to the grey box besides get version that says update or download or something. my brain heh I can't remember, but then you click that and it will bring you back to stock. I did it on my 6045O flawlessly. It brought me right into the latest update. also if you go into the program files and go to the Sugar software folder after it's downloading the latest firmware for your phone and you go to the bin folder you should see a downloaded folder with your model number plus some other numbers and letters. copy that to your desktop. once that's done find the file starting with "R" that is the recovery image. delete that and replace it with twrp recovery image and just name it recovery. go back into the main Sugar folder in the program files and replace the folder with your model number with that folder. you also see a folder named download. that is the downloaded firmware you can delete that folder and just leave the modded folder with your model number containing the twrp recovery image. meanwhile, go through the setup process on your phone and skip all the steps you can and go into the phone. go to the about device and tap on the build number to unlock the developer options. make sure the OEM bootloader unlock is toggled and I just changed the usb debugging also although I don't think that's necessary. go back into the Sugar program and then go to just the update or whatever it is beside the get version and click that and it will update the phone with the latest firmware and it will put the custom recovery on it. make sure once it's done downloading you unplug it and turn it off then go into recovery mode by holding the power down and volume up until the main logo comes up then let go of power and keep holding volume up until twrp boots up. make sure you already have the latest SuperSU zip on your sdcard. go to the terminal or sometimes one comes up from the beginning and enter the systemless supersu line/code or whatever you call it and then hit enter or if it will go straight into twrp first do a factory reset in the advanced wipe tab then the systemless supersu terminal line code and then install the supersu zip. that's it. your back to the latest firmware and rooted. oh and btw, I forgot if you have to be in download mode when you are using the Sugar program. I play around in several phones so forgot at the moment. If you need to go into download mode just plug in the usb as your holding power, volume up and down at the same time and then when it goes into the download mode screen hold volume up for 5-10 seconds until the screen goes black. I hope it helps and sorry if any of this is confusing. It can be a bit advanced for some.
Click to expand...
Click to collapse
Hey I think this is working its currently downloading at 27% I will let u know the progress. Thanks so much!!

chewyboy0 said:
Hey I think this is working its currently downloading at 27% I will let u know the progress. Thanks so much!!
Click to expand...
Click to collapse
This one work but it was way simplier to restore to factory default via the Mobile Q like before.
Bah i don't care anymore my 5.5 battery does strange things so i get a Xiaomi Mi5 from work to replace it.

I am from india, using 6045k, lost duel sim support duo to flashing of marionette's Rom. Still trying to get duel sim back, tried eluga firmware also, but unfortunately i didn't get any error at 45%. Now i am using flyos 2.0, its working like charm. But only one sim is there, i tried several software upgrader versions, but server is not connecting, its always stuck at 20%.
Pls help me.

Siraj Enriq said:
I am from india, using 6045k, lost duel sim support duo to flashing of marionette's Rom. Still trying to get duel sim back, tried eluga firmware also, but unfortunately i didn't get any error at 45%. Now i am using flyos 2.0, its working like charm. But only one sim is there, i tried several software upgrader versions, but server is not connecting, its always stuck at 20%.
Pls help me.
Click to expand...
Click to collapse
Currently Alcatel has disabled the posibility of reflashing a stock ROM with Mobile Upgrade Q, so the only way is by flashing via TWRP or Sahara tool.
I have a 6045Y in latest stock MM (Build 22) and i'm incapable of performing a flash with Mobile Upgrade Q in order to clean my modified /system, the worst thing is that there is no flashable zip of this version which contain many critical fixes. I'm too very annoyed with this change of policy of Alcatel/TCL, they want me to buy a new smatphone but I'll not give them that pleasure, the Idol 3 5.5 is the best smartphone i've ever had in terms of hardware, it's a shame...

ciclolars said:
Currently Alcatel has disabled the posibility of reflashing a stock ROM with Mobile Upgrade Q, so the only way is by flashing via TWRP or Sahara tool.
I have a 6045Y in latest stock MM (Build 22) and i'm incapable of performing a flash with Mobile Upgrade Q in order to clean my modified /system, the worst thing is that there is no flashable zip of this version which contain many critical fixes. I'm too very annoyed with this change of policy of Alcatel/TCL, they want me to buy a new smatphone but I'll not give them that pleasure, the Idol 3 5.5 is the best smartphone i've ever had in terms of hardware, it's a shame...
Click to expand...
Click to collapse
Did u tried sugar mtk tool??

Siraj Enriq said:
Did u tried sugar mtk tool??
Click to expand...
Click to collapse
No, could you share the link? Thanks in advance.

ciclolars said:
No, could you share the link? Thanks in advance.
Click to expand...
Click to collapse
Thank god, today I got my phone to stock rom, by using q5.1.8.
Actually, yesterday only i heard about q.5.1.8, its been a year that i was trying to do this. Appart from q5.1.8, i connected VPN to U. S. Now everything is fine.
I dont know which one helped me, that the q5.1.8 or the VPN. :laugh:
Thanks to all.

Siraj Enriq said:
Thank god, today I got my phone to stock rom, by using q5.1.8.
Actually, yesterday only i heard about q.5.1.8, its been a year that i was trying to do this. Appart from q5.1.8, i connected VPN to U. S. Now everything is fine.
I dont know which one helped me, that the q5.1.8 or the VPN. [emoji23]
Thanks to all.
Click to expand...
Click to collapse
How exactly did you managed to do it? Is it possible to reflash the stock ROM?

ciclolars said:
How exactly did you managed to do it? Is it possible to reflash the stock ROM?
Click to expand...
Click to collapse
Actually, software upgrader can do the job. But the problem was slow server speed. Use q. 5.1.8, simply connect your in switch off condition, and try upgrading, if its not working, try VPN. I tried psyphon VPN connected to USA. In india serveris very slow.
6045k still running on lilopop, thats why people go going for stock roms.

Siraj Enriq said:
Actually, software upgrader can do the job. But the problem was slow server speed. Use q. 5.1.8, simply connect your in switch off condition, and try upgrading, if its not working, try VPN. I tried psyphon VPN connected to USA. In india serveris very slow.
6045k still running on lilopop, thats why people go going for stock roms.
Click to expand...
Click to collapse
In my case, Mobile Upgrade Q display a message that says I'm currently in the latest software version so it doesn't allow me to reflash stock ROM. My device is a 6045Y build 22 MM.

ciclolars said:
In my case, Mobile Upgrade Q display a message that says I'm currently in the latest software version so it doesn't allow me to reflash stock ROM. My device is a 6045Y build 22 MM.
Click to expand...
Click to collapse
Try Sugar Mtk tool
https://mega.nz/#!9UdDGJLI!9S87X0wH0...8iWpPnPSqCPLzs
Details is there on this thread.
I never tried it, try it. Read above msg by member Brian9285