[Q] SW2 Firmware upgrade process freeze - Sony Smartwatch

After upgrading to the latest version of firmware (SmartWatch 2 SW2 v1.4.54) my smartwatch restarts and try to install firmware... during SW2 update process status bar freezed near the end and nothing more happend.
Please help me to fix this problem
ps: I cannot find any Q&A forum for sony smartwatch

Please tell us what have you tried to do up until this point and we'll go from there. I've had this happen to me too, but in the beginning of the update, namely when the firmware was being transferred to the watch.

Similar happened to me, just in my case the update process went to the finish, and then the watch turned off (black screen) and that was over. Can't turn it on, does not show charging screen, nothing, bricked-dead...

Thanks.
I went to google play and upgrade Smartwatch SW2 to it's latest version, which is released yesterday.
I went out of room... when I came back, I saw it freezes in this step... after restarting my SW2, nothing happened.

omidmr said:
Thanks.
I went to google play and upgrade Smartwatch SW2 to it's latest version, which is released yesterday.
I went out of room... when I came back, I saw it freezes in this step... after restarting my SW2, nothing happened.
Click to expand...
Click to collapse
How many apps do you have running for/on the watch? Have you tried uninstalling all of them and doing a clean install?

kamikaze666 said:
How many apps do you have running for/on the watch? Have you tried uninstalling all of them and doing a clean install?
Click to expand...
Click to collapse
It's about updating firmware... currently it cannot turn on completely... it's unpaired, I cannot pair it or see it in other Bluetooth devices.
How can I do a clean install of firmware? before pairing?

omidmr said:
It's about updating firmware... currently it cannot turn on completely... it's unpaired, I cannot pair it or see it in other Bluetooth devices.
How can I do a clean install of firmware? before pairing?
Click to expand...
Click to collapse
I read on one forum that this issue with the firmware may appear because of the apps that are installed for the watch. Namely, after/at the same time it is updating, the watch also tries to pull all info from the phone, including apps and all. I don't know if this will work, but you can try, it won't hurt.
Uninstall all SW2 apps, restart the watch and try again.

kamikaze666 said:
I read on one forum that this issue with the firmware may appear because of the apps that are installed for the watch. Namely, after/at the same time it is updating, the watch also tries to pull all info from the phone, including apps and all. I don't know if this will work, but you can try, it won't hurt.
Uninstall all SW2 apps, restart the watch and try again.
Click to expand...
Click to collapse
nope, nothing happened...
As I told you, my smartwatch does not connect to my cellphone now!

omidmr said:
nope, nothing happened...
As I told you, my smartwatch does not connect to my cellphone now!
Click to expand...
Click to collapse
It was worth a shot... This was what I managed to find when it happened to me...
Anybody else have an idea on what can be done?

kamikaze666 said:
It was worth a shot... This was what I managed to find when it happened to me...
Anybody else have an idea on what can be done?
Click to expand...
Click to collapse
I know I can use dfu-utils to flash from CLI, but I cannot find any DFU file for smartwatch 2.
If it is possible for you, make a backup from yours and give it to me thanks.

At this point you used to be able to "repair" the firmware on the watch using the Sony Update Service. Using your pc you used to be able to load a basic firmware onto the watch and start again...but I think Sony have removed the SW2 from this service.
I think someone on here said they used the SW1 repair option and it worked for them but i'm not sure I would be brave enough to try that unless the watch was totally stuck.....

omidmr said:
I know I can use dfu-utils to flash from CLI, but I cannot find any DFU file for smartwatch 2.
If it is possible for you, make a backup from yours and give it to me thanks.
Click to expand...
Click to collapse
I managed to find this, however, I am not exactly sure for which version it is... https://github.com/underverk/SmartWatch/wiki/Restoring-original-Firmware. I am not able to get to my personal PC for some time, so I won't be able to provide you with a system dump from my watch.

ruggs1234 said:
At this point you used to be able to "repair" the firmware on the watch using the Sony Update Service. Using your pc you used to be able to load a basic firmware onto the watch and start again...but I think Sony have removed the SW2 from this service.
I think someone on here said they used the SW1 repair option and it worked for them but i'm not sure I would be brave enough to try that unless the watch was totally stuck.....
Click to expand...
Click to collapse
Yes, they removed SW2 and SW1 option is not working for SW2!

hennoit lime
kamikaze666 said:
I managed to find this, however, I am not exactly sure for which version it is... https://github.com/underverk/SmartWatch/wiki/Restoring-original-Firmware. I am not able to get to my personal PC for some time, so I won't be able to provide you with a system dump from my watch.
Click to expand...
Click to collapse
Thanks a lot...
I saw that link, that's for SW1.
But I've found latest SW2 firmware from their package in google play
Now my problem is that I cannot restore those images, because there are some differences between those packages and what dfu-utils uses!
I've faced "Error: Only DfuSe file version 1.1a is supported" error, there are a paragraph in http://dfu-util.gnumonks.org/dfuse.html site about this problem, under ".dfu files" heading.

Related

Rogers 2.2 update is available through Kies

Yep...Go get it.
EDIT: I mean Kies...The update box was in my way when I was typing lol
So what is the ROM version name?
A.VOID said:
So what is the ROM version name?
Click to expand...
Click to collapse
Just a min, update failed...I think cause launcher pro was the default home...trying again damn it.
Someone post a odin copy.
?
Let the BRICKING begin!
Would love an ODIN of this ROM... looking forward to it!
Installed Kies... Update process starts but Kies crashes. Anyone else have this issue? I'm currently trying to unroot to see if that makes a difference.
Edit: Exact issue is: MSC.Thunder.FirmwareUpdate has stopped working.
Does it regardless if I choose to backup or not the contacts and data.
Edit 2: Unroot changes nothing.
Edit 3: Doing a factory reset on the device doesn't help either. WTF?
connected to Kies - message "This device will be supported soon"
Fortysixandtwo said:
connected to Kies - message "This device will be supported soon"
Click to expand...
Click to collapse
http://www.samsung.com/ca/support/detail/supportPrdDetail.do?menu=SP00&prd_ia_cd=01012200&prd_mdl_cd=SGH-I896ZKARWC&prd_mdl_name=SGH-I896&prd_ia_sub_class_cd=P#
Get it here
Wonder if it'll be 2.2.1...
Ok so I just got back from writing an exam and will try to reinstall Kies. I tried 2 times to update through my computer this morning and once on my wife's PC (She has a Captivate as well)
All 3 attempts it says that Its downloaded the update but then it fails when it tries to install. Now remember I've not rooted or anything, so i think that there might be a newer version of kies or something...going to look now.
But anyways it tries to update it says a bunch of stuff like: You phone Jsomething1 and the update is supposed to be Jsomething2...I dont get it.
Remember I dont hack or mod phones in the slightest, so I have no clue what this J1 (mine) and the update of j2 is...?
The update is big though, takes a few minutes to download and I have a 16mps download speed...
Downloading this version of Kies and will try again:
http://www.samsungapps.com/about/onPc.as
I'm with Rogers with an AT&T Captivate (Rooted and Cognition 2.3b6). Will I be able to update my device to it? I much prefer the Rogers software than AT&T's. I don't care if I have to use Odin or erase everything.
alexvtr said:
Installed Kies... Update process starts but Kies crashes. Anyone else have this issue? I'm currently trying to unroot to see if that makes a difference.
Edit: Exact issue is: MSC.Thunder.FirmwareUpdate has stopped working.
Does it regardless if I choose to backup or not the contacts and data.
Edit 2: Unroot changes nothing.
Edit 3: Doing a factory reset on the device doesn't help either. WTF?
Click to expand...
Click to collapse
What ROM are you on ?
Did you put the phone in recovery mode when you have the first pop up menu ?
ScottyNuttz said:
Wonder if it'll be 2.2.1...
Click to expand...
Click to collapse
Nope it's 2.2
Where does it say it was released?
gunstar3035 said:
Ok so I just got back from writing an exam and will try to reinstall Kies. I tried 2 times to update through my computer this morning and once on my wife's PC (She has a Captivate as well)
All 3 attempts it says that Its downloaded the update but then it fails when it tries to install. Now remember I've not rooted or anything, so i think that there might be a newer version of kies or something...going to look now.
But anyways it tries to update it says a bunch of stuff like: You phone Jsomething1 and the update is supposed to be Jsomething2...I dont get it.
Remember I dont hack or mod phones in the slightest, so I have no clue what this J1 (mine) and the update of j2 is...?
The update is big though, takes a few minutes to download and I have a 16mps download speed...
Click to expand...
Click to collapse
Did you put your phone in Recovery mode like the first pop up is asking ? (Unplug usb cable from phone (not the computer), power off the phone, Hold vol up/down button and plug usb cable. You should now be in download mode (black/yellow screen with a shovelling droid)
silvertag said:
What ROM are you on ?
Did you put the phone in recovery mode when you have the first pop up menu ?
Click to expand...
Click to collapse
Stock ROM from Rogers
No, not recovery mode.
PC runs W7-32 for what it's worth.
In the meantime, I did some research on the error I mentioned above.
It appears it's a very common issue with KIES.
There are a few workarounds.
So far, I tried the "SIM-out" method and it doesn't work for me.
Next, I'm trying the regedit method.
Will report on results.
@silvertag: your upgrade worked fine or you haven't tried yet?
Enhanced said:
Where does it say it was released?
Click to expand...
Click to collapse
Nowhere you have to check Kies server to know it's been released. There is still no confirmation from Rogers last i checked.
alexvtr said:
Stock ROM from Rogers
No, not recovery mode.
PC runs W7-32 for what it's worth.
In the meantime, I did some research on the error I mentioned above.
It appears it's a very common issue with KIES.
There are a few workarounds.
So far, I tried the "SIM-out" method and it doesn't work for me.
Next, I'm trying the regedit method.
Will report on results.
@silvertag: your upgrade worked fine or you haven't tried yet?
Click to expand...
Click to collapse
Yes it worked fine you HAVE to put the phone in download mode before you start downloading the update or it will fail at the upgrade part.

OMWTFBBQ!!1 Firmware Update??

I noticed that it automagically started updating the firmware when I connected my sidekick to Kies. Should I update? Or will that prevent me from being able to root my phone?
From 1.0.0.11011_4 <--- Currently @
To 1.0.0.11051_4
Weird. My phone is not even recognized in Kies, say's its not supported.
gutter said:
Weird. My phone is not even recognized in Kies, say's its not supported.
Click to expand...
Click to collapse
same here, is there a specific version of Kies that we need ? idk
Yeah just use the vibrant drivers and enabe usb debug mode.
The step by step guide on how to update your phone is on the first page of the thread titled "sidekick 4g."
Hmm, I'm interested in this.. any other input? I might hook mine up to see.
Sent from my Sidekick 4G using XDA app
for some reason when i put it in kies mode it says my device isn't supported (with debugging off) but when ever i turn usb debugging on it connects as mass storage with out an option for kies mode and then kies say my device isnt in the proper mode
Due to the lack of of an answer I am going to create a comprehensive tutorial on how to install the necessary drivers to recognize your device, and update it if so feel so inclined. It was actually extremely easy. This is going to be a video, and I am going to post it as a new thread.
To satisfy any curiosities I want to perform a full dump of this firmware before I update.
Theres my sorry attempt. The first time I uploaded it came out in 480p. I recorded it in 1080p so i deleted it and re upped it. Now when I re upload it it only comes out in 240. **** YOU YOUTUBE SUCK MY ****. I'm sorry this is the best I could do for tonight guys I'm exhausted. I'm going to sleep, but I will try to help as much as possible tomorrow. If you really want to update your phone and need live step by step process stuff I'll throw out my phone number. I really DGAF
The Pope of Dope said:
Theres my sorry attempt. The first time I uploaded it came out in 480p. I recorded it in 1080p so i deleted it and re upped it. Now when I re upload it it only comes out in 240. **** YOU YOUTUBE SUCK MY ****. I'm sorry this is the best I could do for tonight guys I'm exhausted. I'm going to sleep, but I will try to help as much as possible tomorrow. If you really want to update your phone and need live step by step process stuff I'll throw out my phone number. I really DGAF
Click to expand...
Click to collapse
lol if im correct youtube takes some time to render and process the video before it can be watched in its best res. i can watch your video now in 720p i think you just had to give it some time lol so no stress. but thanks for the vid im checking it out now
okay.. i think this thread was a mistake or i read it wrong .
first off i wasnt connecting to kies correctly because i wasnt using samsung kies mini i was using samsung kies.
second the firmware update you are talking about was updating your version of kies it wasnt updating your phone. the version of kies mini that you say to download in the video wasnt the latest kies mini so it updated when you first opened it (same for myself) now that its updated and i have kies open it says there is no upgrade available for my device.
if by some chance kies did update your phone check to see if the build is still KD1 , if it isnt then your phone was upgraded. not likely though
hope this helps and no need to get a dump if your still on stock, but thanks still.
does anyone know how to use the emergency firmware recovery feature in KIES? it seems to ask for some kind of code. I was wondering if by any chance this could be a way to restore your phone to factory stock?
yogi2010 said:
does anyone know how to use the emergency firmware recovery feature in KIES? it seems to ask for some kind of code. I was wondering if by any chance this could be a way to restore your phone to factory stock?
Click to expand...
Click to collapse
Use the 1 clik uninstaller by blu. Works like a dream, just tried it today =)
So there is an update firmware? Anyone tried it? There are several issues with the phone and if there really is an update I am curious as to what has been remedied.

Coming from the Moto 360, a few answers please...

Does the Tizen Mod rom make a big difference in functionality?
Does this void my warranty? I'm stupid, so I'll be surfing with the Gear 2 and worried if I ever have to repair it.
Is there a Google Now search hack out? SVoice doesn't seem to work good for word definitions among other things.
Thanks!
kronium said:
Does the Tizen Mod rom make a big difference in functionality?
Does this void my warranty? I'm stupid, so I'll be surfing with the Gear 2 and worried if I ever have to repair it.
Is there a Google Now search hack out? SVoice doesn't seem to work good for word definitions among other things.
Thanks!
Click to expand...
Click to collapse
Tizen Mod offers a lot of custom features you won't find right out of the box. Provides better battery life and a few other hacks. I don't believe this will void warranty as you can go right back to stock via Odin and haven't seen a trip counter, knox, etc.
quickbird144 said:
Tizen Mod offers a lot of custom features you won't find right out of the box. Provides better battery life and a few other hacks. I don't believe this will void warranty as you can go right back to stock via Odin and haven't seen a trip counter, knox, etc.
Click to expand...
Click to collapse
As I've said on the other thread there's definitely a counter of some sort. Whether Samsung pays attention to it or nor is another story.
javispedro said:
As I've said on the other thread there's definitely a counter of some sort. Whether Samsung pays attention to it or nor is another story.
Click to expand...
Click to collapse
How do you know there's a counter?
kronium said:
How do you know there's a counter?
Click to expand...
Click to collapse
strace /usr/bin/cordon_server . I've found it writes to the param partition all while logging scary things such as "device has been ROOTED" (caps included). It also links with OpenSSL.
(And I suspect that there may be some, slightly more hidden 'tricks').
javispedro said:
strace /usr/bin/cordon_server . I've found it writes to the param partition all while logging scary things such as "device has been ROOTED" (caps included). It also links with OpenSSL.
(And I suspect that there may be some, slightly more hidden 'tricks').
Click to expand...
Click to collapse
Interesting. I can no long pair my gear 2 with my s4. Do you have a link to the stock firmware Odin file? I want to revert back to stock to see if I can pair my watch with my phone again.
RJV3 said:
Interesting. I can no long pair my gear 2 with my s4. Do you have a link to the stock firmware Odin file? I want to revert back to stock to see if I can pair my watch with my phone again.
Click to expand...
Click to collapse
I obviously cannot redistribute firmware files. Either way reflashing stock firmware won't reset the counter. But I doubt the counter would be causing pairing issues to begin with.
javispedro said:
I obviously cannot redistribute firmware files. Either way reflashing stock firmware won't reset the counter. But I doubt the counter would be causing pairing issues to begin with.
Click to expand...
Click to collapse
Ok so I was able to download the stock firmware from sammobile. Just needed to sign up to download. But since then I still cannot pair my gear 2 with my phone and have no clue what can be causing this issue.
I have unrooted and reverted back to stock gear 2...no go.
I have uninstalled xposed framework, wiped delvik cache and cache....no go.
I have no idea how to get this up and running again and this watch is only 1 month old.
How can i figure out why the bluetooth pairing is not working anymore. The pairing sequence just hangs and later says" Failed to Connect to your gear via Gear manager. Refer to Manual for more information."
someone please tell me what am I doing wrong or what the hell is going on with this damn device. I am at my wits end with this.
This is offtopic,..
RJV3 said:
Ok so I was able to download the stock firmware from sammobile. Just needed to sign up to download. But since then I still cannot pair my gear 2 with my phone and have no clue what can be causing this issue..
Click to expand...
Click to collapse
If you've reflashed the Gear plus reverted to factory settings, the the answer regarding what is causing your issue is clear: your phone.
javispedro said:
This is offtopic,..
If you've reflashed the Gear plus reverted to factory settings, the the answer regarding what is causing your issue is clear: your phone.
Click to expand...
Click to collapse
I'm reading other users have the same issue. But yes this is off topic and started a thread to troubleshoot.

[Q] bricked with framaroot

i downloaded framaroot from a page "androidapkgratis.com/2014/07/ framaroot-v191-rootea-con-un-solo-click" all ok, cell rooted. but two days after that, from the night to the morning, the cell was dead, totally. cant put it on recovery mode, cant switch it on. any idea? ive downloaded kdz, but dont recognize the cell, as its off. thanks in advance.
up. up.
get
gonsa12 said:
i downloaded framaroot from a page "androidapkgratis.com/2014/07/ framaroot-v191-rootea-con-un-solo-click" all ok, cell rooted. but two days after that, from the night to the morning, the cell was dead, totally. cant put it on recovery mode, cant switch it on. any idea? ive downloaded kdz, but dont recognize the cell, as its off. thanks in advance.
Click to expand...
Click to collapse
I have to say but never, EVER, download a modified APK that has interaction with root.
Use the official Framaroot app.
Also, for your phone, try to take it to the nearest service centre for that particular brand and see if they can do something to turn it on or reflash it.
Steve977 said:
I have to say but never, EVER, download a modified APK that has interaction with root.
Use the official Framaroot app.
Also, for your phone, try to take it to the nearest service centre for that particular brand and see if they can do something to turn it on or reflash it.
Click to expand...
Click to collapse
yeah, i didnt know that framaroot is from xda, really.
can anybody tell me what does this archive ive downloaded really have done to my phone? my antivirus prevented me, but i thought it was because it hacks sth. tell you becouse it may involve some risk to download it. if you do, may share any idea about to solve the problem it doesn boot?
anyway, ive taken it to a service, may be they can reflash it.
thanks in advance.
gonsa12 said:
yeah, i didnt know that framaroot is from xda, really.
can anybody tell me what does this archive ive downloaded really have done to my phone? my antivirus prevented me, but i thought it was because it hacks sth. tell you becouse it may involve some risk to download it. if you do, may share any idea about to solve the problem it doesn boot?
anyway, ive taken it to a service, may be they can reflash it.
thanks in advance.
Click to expand...
Click to collapse
Seeing that your phone can't be simply booted, you should try booting it into Recovery. That way you can try to flash the stock firmware. Or boot into Download mode, so you can flash your phone using your computer.

Google install on EMU 10.1.1.xxx

Hello
Im searching for a solution to install Google on a devie with EMUI 10.1.1.146
I have a P40 Lite 5G and i was trying some Videos from YT but every time se thame problem.
LZ Play doesn't work wih this EMUI.
I think that is a Global problem with this new EMUI.
Have anybody an idea ????
Thx
Just bought a P40 lite 5g myself on ebay and I'm having the same problem. Like an idiot I updated EMUI when i first started the phone, and now I can't roll it back or install google services as LZ Play won't work. Really nice phone, I think I will just sell it though and get a Xiaomi Pocophone F2 instead. Too much of a headache messing about for days with these youtube video instructions that don't work.
Hi.
wait some time i think it will be a New method.
All other phones will get the Update an will have se same solution.
That's while i think there will be a new solution.
The Phone is realy nice.
I think to have Google on a Huawei Smartphone is interest of Google <=> Huawei
Huawei want to sell phones
Google want to earn money with apps
you can try this
And soon I will release this tool
hello.
I have tried it with the date but it doesn't work.
got the same mesage.
Your Tool in the Video looks amazing.
i hope it will Do a good work.
did You test it on a device with the newest emui like my Phone?
thx
Do you have some screenshot of the error? Just to check what's happening
Sent from my Pixel 4 using Tapatalk
That's the error
OK, try this
make sure you have:
-no sim card inserted
-language is set to english
-factory reset (because I see you have previously ran a manual installation and services and other components are installed as normal apps) - or delte them manually
-connect to wifi
-restore the "chinese app" using hisuite
put DATE back to 20.06.2020 and disable automatic time
run the "chinese app" and try again
I'll retry with the procedure because I need to FR anyway for the development, can't remember if that was the message I got (your device is not supported when translated)
What Backup to use from Match oder April?
thx
Use the one from this video
this restore should give you a valid lzplay with data
So i have done all
Frist Tab ... error message
changing date
second Tab...error message
The error mesage says that the device is not compatible (trabslate with Google from Chinese)
I think that the Main Problem ist the EMUI 10.1.1
anita98558 said:
That's the error
Click to expand...
Click to collapse
Yep, that's it. There's no way past it on P40 Lite 5G.
bender_007 said:
And soon I will release this tool
Click to expand...
Click to collapse
awesome! It' seems so automatic
i hope it will fix my problem
bender_007 said:
Use the one from this video
this restore should give you a valid lzplay with data
Click to expand...
Click to collapse
is there a way to test it with your solution?
I think the Problem might be:
1. EMUI (closed Backdoor)
or
2. Unsupported Device
anita98558 said:
is there a way to test it with your solution?
Click to expand...
Click to collapse
No, this will not fix your phone sadly, it relies on LZplay as all of them, LZplay was that "backdoor" that allowed it. You can try to find some downgrade rom or tutorial (maybe this one I linked, can't be for sure since I have the older emui)
bender_007 said:
No, this will not fix your phone sadly, it relies on LZplay as all of them, LZplay was that "backdoor" that allowed it. You can try to find some downgrade rom or tutorial (maybe this one I linked, can't be for sure since I have the older emui)
Click to expand...
Click to collapse
For the first.
Thank You for Your Support.
With the HiSuite i can't go back toa a previous Version of the EMUI.
So i understand that in the moment i'ts difficult to find a solution.
Today i will try it a few Times with the solution you told me yesterday.
After some tries today still the same.
It doesn't work ?
Yeah, sadly you can't do anything there, unless there is a firmware (older one). One could try downloading adb, running "adb logcat -f /sdcard/log.txt" , running lzplay and after the error pops up press Ctrl-c in command prompt. Maybe the log will tell more
Sent from my Pixel 4 using Tapatalk

Categories

Resources