Database Info

May I know which tempered glass screen protector I should order ?

May I know which tempered glass screen protector I should order from eBay or Amazon.ca which will attract less finger print?

There are not any really good ones because of the curved screen. You either are going to have it peel a bit on the edges or the screen protector will be cut well short of the sides.
I went with this film one and although I wanted glass I am happy with it
https://www.amazon.com/gp/product/B01M700TQ2/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

there all terrible tried 5 now not one any good, the film ones are no good for me as there offer no protection from impact..

I'm happy with this.
I use this. http://www.ebay.com/itm/25266402845...49&var=551590088571&ssPageName=STRK:MEBIDX:IT
Ready to have this and sit the dimensions well. https://fr.aliexpress.com/item/Pzoz...663571.html?shortkey=UfIVFz2q&addresstype=600

gomcse2002 said:
May I know which tempered glass screen protector I should order from eBay or Amazon.ca which will attract less finger print?
Click to expand...
Click to collapse
This is the one I am using after trying several different tempered glass. It's not edge to edge but since it so thin you can barely see the gap. The best part is no halo effect and it's super responsive.
http://www.protectionfilms24.com/ar...en-protector-clear-huawei-mate-9-2729860.html
Here's a review on youtube
https://www.youtube.com/watch?v=zEpMWkIPqyQ

I'm on my second Brotect. Didn't like them the first time around but they have grown on me. I don't think they'd offer as much impact protection as a thicker tg, but they also fit and look better on a 2.5d screen.
Sent from my MHA-L29 using Tapatalk

I went with the Supershieldz from Amazon and it has been good for me, works with 3 different case I have tried.
https://www.amazon.com/gp/product/B01N6BCXDJ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Amazon Mr Shield For Huawei Mate 9

I have the newest Nillkin and it is a bit oversized, which leaves a halo around the edges. Not bad when the screen is on, but very noticeable when the screen is dark. That being said, it did save my bacon this morning. I dropped my phone from about 4 foot up(bobbled the catch) straight onto concrete... it landed on a corner and fell flat on the face. The screen protector did it's job and saved the display. The protector now has a very nice diagonal crack running the entire width, but it still works. Unfortunately, it means I need to buy a new one as Nillkin only provides one in the package. So it is off to Amazon to order my old standby, the SuperShieldz

Okiera29 said:
I have the newest Nillkin and it is a bit oversized, which leaves a halo around the edges. Not bad when the screen is on, but very noticeable when the screen is dark. That being said, it did save my bacon this morning. I dropped my phone from about 4 foot up(bobbled the catch) straight onto concrete... it landed on a corner and fell flat on the face. The screen protector did it's job and saved the display. The protector now has a very nice diagonal crack running the entire width, but it still works. Unfortunately, it means I need to buy a new one as Nillkin only provides one in the package. So it is off to Amazon to order my old standby, the SuperShieldz
Click to expand...
Click to collapse
Get Mr Shield on amazon, include 2 and if you broke one only email with picture and they sent replacement free, it happen to me on Galaxy Tab A and Nexbit Robin and get both free...

Try full covdr

I installed a Cafele glass screen protector the first day i got my Mate 9 and didn't had to replace it in a year.
It's a bit oversized, so it covers the edges, and comes with a liquid that fills the ait bubbles.
You don't really see them anymore.

None of the tempered glass I bought fits to the mate 9. So I took " hydrogel" screen protector on aliexpress and it fits perfect !
Sorry for bad english ≥≤

tenson22000 said:
None of the tempered glass I bought fits to the mate 9. So I took " hydrogel" screen protector on aliexpress and it fits perfect !
Sorry for bad english ≥≤
Click to expand...
Click to collapse
This
Sent from my MHA-L29 using Tapatalk

Best screen protector for huawei p20 pro

Hey guys, can anyone recommend a tempered glass screen protector for Huawei p20 pro? Normally look to eBay but been abit hit and miss. Any recommendations on a good case would be great too! Thanks!

Please only start one thread and do not spam the forum

Posted In wrong one sorry dickhead

Spigen tempered glass is the best I've found so far

Yes I agree spigen glass is top!
I'm so disappointed by hardness of screen P20 pro. I'm sure is not an a gorilla glass.... In one month I had many claw on it.... Without glass.

deraiz12 said:
Yes I agree spigen glass is top!
I'm so disappointed by hardness of screen P20 pro. I'm sure is not an a gorilla glass.... In one month I had many claw on it.... Without glass.
Click to expand...
Click to collapse
Did you have any issues with the spigen? For me the sides aren't adhering properly.
With your scratches on the glass, the p20 pro does have gorilla glass and all gorilla glass phones out there can get scratches especially with bits of sand and random stuff in your pocket.

lambstone said:
Did you have any issues with the spigen? For me the sides aren't adhering properly.
With your scratches on the glass, the p20 pro does have gorilla glass and all gorilla glass phones out there can get scratches especially with bits of sand and random stuff in your pocket.
Click to expand...
Click to collapse
I have any problem with spigen glass all seem very good. But for your search on you I have already see the solution.
And for the scratch on screen I use them like my old S8 and my S8 had no scratch or small not the same as my P20 pro. i really like my P20 pro except for this point!

deraiz12 said:
But for your search on you I have already see the solution.
Click to expand...
Click to collapse
What do you mean?
deraiz12 said:
And for the scratch on screen I use them like my old S8 and my S8 had no scratch or small not the same as my P20 pro. i really like my P20 pro except for this point!
Click to expand...
Click to collapse
My s7 edge had hair line scratches though.

lambstone said:
What do you mean?
My s7 edge had hair line scratches though.
Click to expand...
Click to collapse
Yes sorry for my bad English....
For your problem with your screen protector you can a find easily the solution on YouTube.

https://it.aliexpress.com/item/5D-D...Protezione-Dello-Schermo-Del/32869728896.html
This is by far the best glass for p20 pro.
Perfect fit, great quality and rounded edges.
Just search 5d p20 pro on AliExpress, and look for this type, you won't find this good stuff in Europe or US

Spigen rugged armor + spigen glass AND YOU ARE SAFE. :laugh:

Zagg InvisibleShield by far.

craigo1988 said:
Hey guys, can anyone recommend a tempered glass screen protector for Huawei p20 pro? Normally look to eBay but been abit hit and miss. Any recommendations on a good case would be great too! Thanks!
Click to expand...
Click to collapse
I've been using the Nilliken glass screen protector. Tried the other crap that doesn't adhere to the edges. The Nilliken is only 0.2 mm thick which probably helps adhering near the edges.
Used it on my P10+ and my wife's iPhone SE and great oleophobic feature which is part of the Japanese glass and not just a coating.
Installed it on my P20 off centre and it still adheres to the edges. Worth the $25.

Nillkin is smaller than the screen. Actualy a lot smaller than the actual screen. Aestheticaly is crap. Functionaly is just like all other protectors.
Sent from my CLT-L29 using Tapatalk

I bought one from Spigen, dont know that firm but im very happy. they also have a great concept on how to get the glass on the phone much easier by having sort of "handles" on the protective plastic on the glass. Plus i bought the case too, perfect fit, very robust, and works like a charm with the tempered glass
https://www.amazon.de/gp/product/B07CGD26Q7/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
https://www.amazon.de/gp/product/B078YH92RH/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

sniper20 said:
Nillkin is smaller than the screen. Actualy a lot smaller than the actual screen. Aestheticaly is crap. Functionaly is just like all other protectors.
Click to expand...
Click to collapse
I disagree.... Not a lot smaller than the screen... Goes right up to curved edge. Wife has one on her iPhone for 2 yrs and oleophobic feature is still great.
Aestheticaly is better than most crap. Doubt if you have really tried one.

I have tried two on my p20 pro and one on my oneplus 3. Both with the same problem. They were marginally fitting on the actual screen. (i don't mean the black border of the screen. Not even close. I mean the actual screen) in general I'm a very protective user for all of my phones and even when I change for a new model, the last one is in perfect factory condition. After several amoled models that I've owned, (Samsung, huawei and oneplus) due to the curved edges of those screens, I have come to a conclusion.... I never use a tempered glass anymore. In worst case I've used iq shield wet membrane and never had any problems. In fact let's remember what everyone was doing when tempered glass wasn't around and we only had gorilla glass. I believe it's an artificialy created need, and after all these years I even dought even the idea behind the application of tempered glass. When a phone drops, if the forces are applied in that way and strength that a screen would crack it would crack. No extra glass will save you. Actually the way these glasses are applied on the screen can't prevent that. As far as scratches concerned, if gorrila glass can save you, then it's the same for every temp glass. If the one can't, so it's the other. (the only benefit it's that the temp glass you can easily change it). gorilla glass is a well documented patent with thousands of applications in daily life. I dought the same for all those generic glasses out in the market. (as for the well established companies like nilkin or spiegen etc etc, as I told above I highly dought its effectiveness for the reason I explained above.)
Its only my personal opinion from personal experience with various models from Samsung, oneplus and huawei. And for the last 10 years it served me very well.
Sent from my CLT-L29 using Tapatalk

sniper20 said:
I have tried two on my p20 pro and one on my oneplus 3. Both with the same problem. They were marginally fitting on the actual screen. (i don't mean the black border of the screen. Not even close. I mean the actual screen) in general I'm a very protective user for all of my phones and even when I change for a new model, the last one is in perfect factory condition. After several amoled models that I've owned, (Samsung, huawei and oneplus) due to the curved edges of those screens, I have come to a conclusion.... I never use a tempered glass anymore. In worst case I've used iq shield wet membrane and never had any problems. In fact let's remember what everyone was doing when tempered glass wasn't around and we only had gorilla glass. I believe it's an artificialy created need, and after all these years I even dought even the idea behind the application of tempered glass. When a phone drops, if the forces are applied in that way and strength that a screen would crack it would crack. No extra glass will save you. Actually the way these glasses are applied on the screen can't prevent that. As far as scratches concerned, if gorrila glass can save you, then it's the same for every temp glass. If the one can't, so it's the other. (the only benefit it's that the temp glass you can easily change it). gorilla glass is a well documented patent with thousands of applications in daily life. I dought the same for all those generic glasses out in the market. (as for the well established companies like nilkin or spiegen etc etc, as I told above I highly dought its effectiveness for the reason I explained above.)
Its only my personal opinion from personal experience with various models from Samsung, oneplus and huawei. And for the last 10 years it served me very well.
Click to expand...
Click to collapse
First... I installed the Nillkin on my P20, not the Pro. It fits perfect and covers the black edges like it did on my P10+ and the SE. Can't speak for the Pro, but I doubt that Nillkin would design that one smaller!!
Second... US Corning makes Gorilla glass and Japan AGC makes Dragontrail, both great screen glasses. On both the oleophobic feature is part of the vapour deposition hardening process. Don't know what Huawei uses on the P20 series. I do know that my P20 screen is more scratch resistance and has a better oleophobic feature than my previous P10+.
Third... Nillkin uses AGC glass for their screen protectors. And I believe, the only one that is 0.2 thin. And I can speak for the oleophobic feature that doesn't wear off in a couple of months like the cheaper crap that uses a coating.
You obviously don't like or believe in glass screen protectors, that's OK, but please don't lump them all together. Most glass screen protectors are installed for scratch protection and some are way better than others.

Anybody know of one for the pro that goes all the way to the edges and uses the strip of adhesive to stay on? I had one on my V30 and used the loca glue for a perfect application from curved edge to curved edge

bravo261 said:
Anybody know of one for the pro that goes all the way to the edges and uses the strip of adhesive to stay on? I had one on my V30 and used the loca glue for a perfect application from curved edge to curved edge
Click to expand...
Click to collapse
When I was surfing through You TUBE for P20 glass screen protectors, I did see one for the Pro that covered the curved edges, but instead of a thin strip of edge adhesive, it had the silicone covering the whole glass. I watched the typical spread when centre pressed.
I would've got that one for the P20, but couldn't find it again. Maybe someone knows where to find it.

Amazing Glass Screen Protector

So after seeing bad reviews of countless glass screen protectors, I have finally stumbled upon one that is actually fantastic and covers the entire display.
https://www.amazon.ca/ESR-Protector...2+tempered&dpPl=1&dpID=51kmkyd-p6L&ref=plSrch
I purchased this thing about a week ago and have so far been extremely satisfied. For starters it comes with a alignment tool that makes putting it on a breeze.
One benefit of this screen protector is that it is truly edge to edge, leaving about 0.75mm of space on each edge of the glass while simultaneously not cutting out any part of the display. The other benefit is that it has adhesive throughout the entire glass including the edges so no issues with the rainbow halo effect. The oleophobic coating on it is also superb. It feels EXACTLY like the original display, most glass screen protectors skimp out on this which leads them to feel a bit sticky but this one glides like the original display under it.
I installed it in under 3 minutes perfectly and there are absolutely no bubbles and the singular camera cutout is perfectly made in the correct spot. Hands down the best glass screen protector I've had for any smarthphone.

Thanks for the tip. I've ordered one on AliExpress from the same brand, costs only 5 usd

Using one for one month, just perfect and easy to apply. Very good quality and i have tried many screen protectors for mix 2 but none was as good as this one.

Vin87 said:
Thanks for the tip. I've ordered one on AliExpress from the same brand, costs only 5 usd
Click to expand...
Click to collapse
Can You add link to this screen protector? I serch but i find only to mi mix 2S. Thanks!

jankes13 said:
Can You add link to this screen protector? I serch but i find only to mi mix 2S. Thanks!
Click to expand...
Click to collapse
it is compatible with mix 2 too. and it's amazing, best one i've had

kostekzg said:
it is compatible with mix 2 too. and it's amazing, best one i've had
Click to expand...
Click to collapse
GREAT! Thanks for answer!

Hey.
I use my phone since early 2018 now.
After a few different screen protectors i gave up and use it without protector.
The phone is like a new one. I think the glass is very good and no protector is needed.
The display is very smooth to tap without one scratch on it.
Use it with full cover/case with magnetic closer.

I managed to get some hair-like fine scratches. I think your full cover helps a lot

I just shattered my ESR protector, you will never guess how. While pulling the phone out of my pocket, I somehow hooked the corner of my glass, right where the front camera is located ( here: https://imgur.com/F5Crawg ) with some loose thread in my pocket They should just make a round cutout :\

Just put mine on this morning, fits really well but 3 areas have a speck of dust under them, I put it on after getting out of the shower as the mist in the air normally keeps the dust away but not this time.
Got the esr case as well which is ok for the price.
Got them from the ESR store on AliExpress.
Sent from my Mi MIX 2 using Tapatalk

kostekzg said:
I just shattered my ESR protector, you will never guess how. While pulling the phone out of my pocket, I somehow hooked the corner of my glass, right where the front camera is located ( here: https://imgur.com/F5Crawg ) with some loose thread in my pocket They should just make a round cutout :\
Click to expand...
Click to collapse
Ruined 2 glass protector with that idiotic cut
Sent from my Mi MIX 2 using Tapatalk

Best screen protector I've ever had, and I think I've tried them all. Full glue so no weird effects, no dot matrix, perfect cut and perfect fit with the supplied tool. I'm highly impressed.
Tbh I can't understand why we need a camera cut out, just make a circular clear area.

Vin87 said:
Best screen protector I've ever had, and I think I've tried them all. Full glue so no weird effects, no dot matrix, perfect cut and perfect fit with the supplied tool. I'm highly impressed.
Tbh I can't understand why we need a camera cut out, just make a circular clear area.
Click to expand...
Click to collapse
ESR? The one in the OP?

Miso122 said:
ESR? The one in the OP?
Click to expand...
Click to collapse
Yes the ESR from the Op. I got mine from AliExpress

Vin87 said:
Yes the ESR from the Op. I got mine from AliExpress
Click to expand...
Click to collapse
thanks, got mine on plane rn

crzykiller said:
So after seeing bad reviews of countless glass screen protectors, I have finally stumbled upon one that is actually fantastic and covers the entire display.
https://www.amazon.ca/ESR-Protector...2+tempered&dpPl=1&dpID=51kmkyd-p6L&ref=plSrch
I purchased this thing about a week ago and have so far been extremely satisfied. For starters it comes with a alignment tool that makes putting it on a breeze.
One benefit of this screen protector is that it is truly edge to edge, leaving about 0.75mm of space on each edge of the glass while simultaneously not cutting out any part of the display. The other benefit is that it has adhesive throughout the entire glass including the edges so no issues with the rainbow halo effect. The oleophobic coating on it is also superb. It feels EXACTLY like the original display, most glass screen protectors skimp out on this which leads them to feel a bit sticky but this one glides like the original display under it.
I installed it in under 3 minutes perfectly and there are absolutely no bubbles and the singular camera cutout is perfectly made in the correct spot. Hands down the best glass screen protector I've had for any smarthphone.
Click to expand...
Click to collapse
There is a white frame and black frame available. Which one did you choose? . . . and is there a case that would be most compatible with this rounded edge protector?

ESR
Well, ESR glasss has the best oleofobic coating and clearness. No rainbow efect too, it has gule on the whole surface. Just that nowel plastic frame needs some practice to get use to it. There are no gaps between it and the glass on all sides , when install. The glue is really strong. I am siprised that somebody managed to stisck something between glass and screen.

My ESR protector died after a couple months of use. First some scratches appeared (the protector is softer than the screen) and on one of those scratches (a deeper one on the edge) the protector cracked. Removal was not that easy as the force required to pull it of will result in a shattered protector everywhere so expect lots of glass dust. I've ordered a new one together with a ESR case (that fits lovely too). These things are so cheap anyway that I don't mind going through a couple of them each year.

Just got the ESR case and screen protector. Thanks for the recommendation, this screen protector feels and looks like there is no protector at all, no more smudges over the original screen. The perfect application from the bracket and adhesive across the entire protector makes it the best one I've used, after giving up on covering my mix 2 after 3-4 different protectors giving neuton rings and immediately thrown out. I have probably dropped my mix 2 on the pavement 7 or 8 times in the last year getting out of my car, and only got a tiny crack on the bottom bezel corner of the screen. Since the bottom bezel on the ESR protector is black my phone looks undamaged now.
The ESR case is nearly as good as the one in the box. I do notice it's slightly thicker than the case in the box, and the added bottom protection makes the phone slightly longer, but it's overall an exceptional fit.

I got mine from taobao directly.
https://detail.tmall.com/item.htm?id=544415913057&spm=a1z09.2.0.0.1be12e8dZtBmgW&_u=i23vb00o11c6
3-protector for 39 CNY, with a free silicon case (very ****ty).
This protector have soft edges to fit the curved screen edge, perfect for my case.

S10e screen protectors

Which one do you recommend for the S10e? Right now I'm still using the default protector which was applied by Samsung, but I don't really like it.

i ordered one on ebay but i have a feeling it's flat not edge to edge full cover for 10e. They use generic photoshopped stock photo for all 3 models and claim it's curved. I think 10e has 2.5D edge. Not completely flat. I'm also using the garbage thin film they included. For $800 scumsung could include high quality glass and case. I also ordered glass for rear cameras. Never seen or used one before. Not sure what to expect.

tried ESR tempered glass and MP mall tempered glass from amazon
both do not stick on side, ESR is off by like 0.75 mm because of 2.5D curve of glass, it does not stick on side. so dont waste your money on these two, i am still looking for one may be just a bit smaller than ESR.
temporarily ordering a film protector till i find a tempered glass which fits right.

I'm using the PureGear HD Clear Tempered Glass Screen Protector https://www.amazon.com/dp/B07P7S174H/ref=cm_sw_r_cp_apa_i_byaHCbZY5Q1N0
It only has adhesive on the edges so there is no bubbles. It is case friendly and is a decent alternative to the whitedome which remains the superior choice for the 2.5D screens.

It only has adhesive on the edges so there is no bubbles. It is case friendly and is a decent alternative to the whitedome which remains the superior choice for the 2.5D screens.
Click to expand...
Click to collapse
how is touch sensitivity and does is create rainbow effect like some tempered glass with adhesive on side do?

Keep in mind aftermarket screen protecters (especially glass ones) will have problems with the fingerprint reader.
Im using the samsung one for now until some testing and revising is done

No rainbow effect and if you increase touch sensitivity in the settings it works great. I have no real complaints.

which non-glass protector do you guys recommend?

destz0r said:
which non-glass protector do you guys recommend?
Click to expand...
Click to collapse
I am interested as well, tried both ESR screen protectors and they were both too small for the screen. doesn't look like there is a clear favorite right now

DSX2 said:
Keep in mind aftermarket screen protecters (especially glass ones) will have problems with the fingerprint reader.
Im using the samsung one for now until some testing and revising is done
Click to expand...
Click to collapse
That's only for bigger models. S10E finger scanner is on the side.
Sent from my SM-G970U1 using Tapatalk

Why is there a lip or Ridge around perimeter of screen of galaxy s10e
Does anybody know why there is a lip or Ridge around the edges of Galaxy S10e screen it's almost looks like a screen protector has been applied from the factory

willdogg78 said:
Does anybody know why there is a lip or Ridge around the edges of Galaxy S10e screen it's almost looks like a screen protector has been applied from the factory
Click to expand...
Click to collapse
Yes, that's exactly what you are seeing. The S10e does indeed have a factory installed plastic screen protector. You can really feel it around the camera as there's a cutout for the camera. I would expect it to scratch rather quickly, plus I don't think it provides nearly as much drop protection as a tempered glass one might.
I'm following along here hoping that there does wind up being an economical tempered glass screen protector that works well and doesn't life at the edges. Seems like this will be similar to my S7, where I was never really able to find something that works and just went naked.

Thank you for the response I've just been so confused with everyone saying the S10 and S10+ have one but not the S10e. I think you're right it is just a polyurethane plastic protector. And just a heads up I tried to apply a tempered glass protector over top of it and it definitely made it hard for the edges to stick.

willdogg78 said:
Thank you for the response I've just been so confused with everyone saying the S10 and S10+ have one but not the S10e. I think you're right it is just a polyurethane plastic protector. And just a heads up I tried to apply a tempered glass protector over top of it and it definitely made it hard for the edges to stick.
Click to expand...
Click to collapse
I had the same confusion. All of the media I've seen say the pre-installed one is only on the S10 and S10+, but if you look around the camera on the S10e, there's clearly a cutout that confirms there is a pre-installed screen protector on there. I'm still not exactly sure how to get it off. I picked around the edges a bit and nothing is coming up easily.
I'm not sure how well the edges of a tempered glass one will stick even if you took off the pre-installed one. I haven't seen any reports of an economical one that works yet. I think I'm going to be in the same boat as I am with my S7 and be forced to go without one.

Follow

DarkMage619 said:
I'm using the PureGear HD Clear Tempered Glass Screen Protector https://www.amazon.com/dp/B07P7S174H/ref=cm_sw_r_cp_apa_i_byaHCbZY5Q1N0
It only has adhesive on the edges so there is no bubbles. It is case friendly and is a decent alternative to the whitedome which remains the superior choice for the 2.5D screens.
Click to expand...
Click to collapse
If anyone looking for decent glass. This brand is good to go, but expensive. Might wait out a little.
Sent from my SM-G970U1 using Tapatalk

my factory installed screen protector is starting to show some scratches and wear. Getting near desperate trying to find a good affordable screen protector for the s10e

I ordered an Alinsea glass protector from amazon, sounds like a knock off of a Whitestone from their description. It doesn't have a cut out for the front facing camera, which is great, as a cut out just seems to collect pocket lint. I have not received it yet.

1
Tapatalkkal küldve az én SM-G970F eszközömről

freddie813 said:
I ordered an Alinsea glass protector from amazon, sounds like a knock off of a Whitestone from their description. It doesn't have a cut out for the front facing camera, which is great, as a cut out just seems to collect pocket lint. I have not received it yet.
Click to expand...
Click to collapse
I got one. First time doing an install of this type and given the barebones installation tools provided, it was above average difficultly. First one ended up with bubbles.

Redmi K20 Pro Screen protectors.

Planning to get the Redmi K20 Pro but would like to keep it minimal in terms of protection. Just need some scratch protection.
Seen Gadgetshieldz full body screen protector as one of the recommendations.
https://www.gadgetshieldz.com/xiaomi-redmi-k20-pro-screen-protector-guards.html
Anything else that can be used without adding much bulk just for scratch protection? Don't want to hide those lovely patterns on the k20 back.

You should be able to use any screen protector for the Mi Mix 3 we they have the same screen size.

saiarnav said:
I didn't find anything like body protectors like gadgetshieldz.
Click to expand...
Click to collapse
Have you seen or tried the Mobile Outfitters films for front, back or whole size?

So I recently got my Mi 9T pro and found this thread while looking for a screen protector.
Has anyone tried the linked one from gadgetshieldz? If yes, good experiences? Does it cover the complete screen? I really can't stand the glass protectors which leave like 2mm of the screen on each side completely uncovered...

ChrisM243 said:
So I recently got my Mi 9T pro and found this thread while looking for a screen protector.
Has anyone tried the linked one from gadgetshieldz? If yes, good experiences? Does it cover the complete screen? I really can't stand the glass protectors which leave like 2mm of the screen on each side completely uncovered...
Click to expand...
Click to collapse
I'm using the ID glass from ringke full display protection a bit pricey though

Some one here having a problem with their tempered glass and their vasr?
Thank you
I mean their case.

Anton_Chigurh said:
Have you seen or tried the Mobile Outfitters films for front, back or whole size?
Click to expand...
Click to collapse
No

bought Glazedinc screen protector.. its hard and solid. covered every side.

I am using The Ringke Red Case, along with a generic Hydragel screen Protector from AliExpress (₹65). Till now my phone has had atleast 6-7 falls of which 2 were serious enough to stop the heart but zero bumps or cracks...
I haven't felt the need for over priced screen protectors from Glazedinc or anyone else...
Previously i used to use S-sheildz (Origin of GadetshieldZ from USA). Had to use water to apply the film but it was good enough that in my 7+ years of using them never had a screen scratch.... Or crack.. But can't find a source anymore. And Don't want pay more then 200 per screen guard....

maddy143ded said:
I am using The Ringke Red Case, along with a generic Hydragel screen Protector from AliExpress (₹65). Till now my phone has had atleast 6-7 falls of which 2 were serious enough to stop the heart but zero bumps or cracks...
I haven't felt the need for over priced screen protectors from Glazedinc or anyone else...
Previously i used to use S-sheildz (Origin of GadetshieldZ from USA). Had to use water to apply the film but it was good enough that in my 7+ years of using them never had a screen scratch.... Or crack.. But can't find a source anymore. And Don't want pay more then 200 per screen guard....
Click to expand...
Click to collapse
once the Hydragel screen protector is applied, can that be removed .. when we dont want it..

I am using a nillkin screen protector 0.33mm without the black edges. Fits perfect without any bubbles or ring effect. So far the best screen protector for this phone if you want a glass screen protector. It has good olephobic coating so it's smooth and because I got the 0.33mm version they don't crack easily.

Where did you buy that? I have Nillkin tempered glass screen 0.2mm from Amazon India. It doesn't cover the whole screen. It doesn't even cover the display area completely. It also has halo around the edges even though I went to mobile phone store and asked them to apply the screen protector.
This is in fact my 3rd screen protector. I applied 2 others - one which had black edge which covered part of the display, and second one without black edges which also didn't cover the entire display.
I've also bought a set of 2 from GearBest, but I haven't applied it as it's the same size as the Nillkin one.
2 more on the way from Aliexpress, but I'm not too hopeful about them either. I don't want to take chance with another Nillkin, but you've found one that covers the entire screen and the edges stick properly as well, then I'd like to try it.
thexplode7 said:
I am using a nillkin screen protector 0.33mm without the black edges. Fits perfect without any bubbles or ring effect. So far the best screen protector for this phone if you want a glass screen protector. It has good olephobic coating so it's smooth and because I got the 0.33mm version they don't crack easily.
Click to expand...
Click to collapse

nandakis4 said:
once the Hydragel screen protector is applied, can that be removed .. when we dont want it..
Click to expand...
Click to collapse
Oh easily,,, It's just some kind of plastic+rubber film that is preventing any scratches on my screen... Should offer enough protection from breaks also...

I'm using Clearplex on the screen with this phone. Is awesome. The case in the box is nice but not very strong, it's breaking in corners without getting hit or fallen.
I ordered hydrogel back film (Im waiting for it from Aliexpress) and a Nillkin transparent cover to have a couple of options.
Does transparent Nillkin cover get yellowish after a couple of months?
Sent from my Mi 9T Pro using Tapatalk

Glazedinc
Can you tell me if it has the black borders?
nandakis4 said:
bought Glazedinc screen protector.. its hard and solid. covered every side.
Click to expand...
Click to collapse

scarmage said:
Can you tell me if it has the black borders?
Click to expand...
Click to collapse
Yes it has black borders
Sent from my Redmi K20 Pro using XDA Labs

I have hydrogel AND Nillkin 2.5D double protection.
Sent from my Redmi K20 Pro using Tapatalk

Hey guys and gals,
Has anybody tried a frosted/matte/anti-glare screen protector with the 9T PRO/K20 Pro? Which one?
Have you noticed any changes with the performance of the fingerprint sensor?
Thanks!

maddy143ded said:
I am using The Ringke Red Case, along with a generic Hydragel screen Protector from AliExpress (₹65). Till now my phone has had atleast 6-7 falls of which 2 were serious enough to stop the heart but zero bumps or cracks...
I haven't felt the need for over priced screen protectors from Glazedinc or anyone else...
Previously i used to use S-sheildz (Origin of GadetshieldZ from USA). Had to use water to apply the film but it was good enough that in my 7+ years of using them never had a screen scratch.... Or crack.. But can't find a source anymore. And Don't want pay more then 200 per screen guard....
Click to expand...
Click to collapse
Which Hydrogel link?

scarmage said:
Where did you buy that? I have Nillkin tempered glass screen 0.2mm from Amazon India. It doesn't cover the whole screen. It doesn't even cover the display area completely. It also has halo around the edges even though I went to mobile phone store and asked them to apply the screen protector.
This is in fact my 3rd screen protector. I applied 2 others - one which had black edge which covered part of the display, and second one without black edges which also didn't cover the entire display.
I've also bought a set of 2 from GearBest, but I haven't applied it as it's the same size as the Nillkin one.
2 more on the way from Aliexpress, but I'm not too hopeful about them either. I don't want to take chance with another Nillkin, but you've found one that covers the entire screen and the edges stick properly as well, then I'd like to try it.
Click to expand...
Click to collapse
Hmm I bought in lazada which is like aliexpress but for my country the 0.33mm one doesn't breakf easily and I understand what you mean by not fitting fully it does have like a gap of few cm of the edges. But a case solves this. I am using spoken case btw. it doesn't have the rainbow effect though. When I got it and install I just push the bubbles out from the side the rainbow effect is gone. Idk maybe different place they use different kind of glass. I am using Redmi k20 pro btw