Redmi K20 Pro Screen protectors. - Redmi K20 Pro / Xiaomi Mi 9T Pro Accessories

Planning to get the Redmi K20 Pro but would like to keep it minimal in terms of protection. Just need some scratch protection.
Seen Gadgetshieldz full body screen protector as one of the recommendations.
https://www.gadgetshieldz.com/xiaomi-redmi-k20-pro-screen-protector-guards.html
Anything else that can be used without adding much bulk just for scratch protection? Don't want to hide those lovely patterns on the k20 back.

You should be able to use any screen protector for the Mi Mix 3 we they have the same screen size.

saiarnav said:
I didn't find anything like body protectors like gadgetshieldz.
Click to expand...
Click to collapse
Have you seen or tried the Mobile Outfitters films for front, back or whole size?

So I recently got my Mi 9T pro and found this thread while looking for a screen protector.
Has anyone tried the linked one from gadgetshieldz? If yes, good experiences? Does it cover the complete screen? I really can't stand the glass protectors which leave like 2mm of the screen on each side completely uncovered...

ChrisM243 said:
So I recently got my Mi 9T pro and found this thread while looking for a screen protector.
Has anyone tried the linked one from gadgetshieldz? If yes, good experiences? Does it cover the complete screen? I really can't stand the glass protectors which leave like 2mm of the screen on each side completely uncovered...
Click to expand...
Click to collapse
I'm using the ID glass from ringke full display protection a bit pricey though

Some one here having a problem with their tempered glass and their vasr?
Thank you
I mean their case.

Anton_Chigurh said:
Have you seen or tried the Mobile Outfitters films for front, back or whole size?
Click to expand...
Click to collapse
No

bought Glazedinc screen protector.. its hard and solid. covered every side.

I am using The Ringke Red Case, along with a generic Hydragel screen Protector from AliExpress (₹65). Till now my phone has had atleast 6-7 falls of which 2 were serious enough to stop the heart but zero bumps or cracks...
I haven't felt the need for over priced screen protectors from Glazedinc or anyone else...
Previously i used to use S-sheildz (Origin of GadetshieldZ from USA). Had to use water to apply the film but it was good enough that in my 7+ years of using them never had a screen scratch.... Or crack.. But can't find a source anymore. And Don't want pay more then 200 per screen guard....

maddy143ded said:
I am using The Ringke Red Case, along with a generic Hydragel screen Protector from AliExpress (₹65). Till now my phone has had atleast 6-7 falls of which 2 were serious enough to stop the heart but zero bumps or cracks...
I haven't felt the need for over priced screen protectors from Glazedinc or anyone else...
Previously i used to use S-sheildz (Origin of GadetshieldZ from USA). Had to use water to apply the film but it was good enough that in my 7+ years of using them never had a screen scratch.... Or crack.. But can't find a source anymore. And Don't want pay more then 200 per screen guard....
Click to expand...
Click to collapse
once the Hydragel screen protector is applied, can that be removed .. when we dont want it..

I am using a nillkin screen protector 0.33mm without the black edges. Fits perfect without any bubbles or ring effect. So far the best screen protector for this phone if you want a glass screen protector. It has good olephobic coating so it's smooth and because I got the 0.33mm version they don't crack easily.

Where did you buy that? I have Nillkin tempered glass screen 0.2mm from Amazon India. It doesn't cover the whole screen. It doesn't even cover the display area completely. It also has halo around the edges even though I went to mobile phone store and asked them to apply the screen protector.
This is in fact my 3rd screen protector. I applied 2 others - one which had black edge which covered part of the display, and second one without black edges which also didn't cover the entire display.
I've also bought a set of 2 from GearBest, but I haven't applied it as it's the same size as the Nillkin one.
2 more on the way from Aliexpress, but I'm not too hopeful about them either. I don't want to take chance with another Nillkin, but you've found one that covers the entire screen and the edges stick properly as well, then I'd like to try it.
thexplode7 said:
I am using a nillkin screen protector 0.33mm without the black edges. Fits perfect without any bubbles or ring effect. So far the best screen protector for this phone if you want a glass screen protector. It has good olephobic coating so it's smooth and because I got the 0.33mm version they don't crack easily.
Click to expand...
Click to collapse

nandakis4 said:
once the Hydragel screen protector is applied, can that be removed .. when we dont want it..
Click to expand...
Click to collapse
Oh easily,,, It's just some kind of plastic+rubber film that is preventing any scratches on my screen... Should offer enough protection from breaks also...

I'm using Clearplex on the screen with this phone. Is awesome. The case in the box is nice but not very strong, it's breaking in corners without getting hit or fallen.
I ordered hydrogel back film (Im waiting for it from Aliexpress) and a Nillkin transparent cover to have a couple of options.
Does transparent Nillkin cover get yellowish after a couple of months?
Sent from my Mi 9T Pro using Tapatalk

Glazedinc
Can you tell me if it has the black borders?
nandakis4 said:
bought Glazedinc screen protector.. its hard and solid. covered every side.
Click to expand...
Click to collapse

scarmage said:
Can you tell me if it has the black borders?
Click to expand...
Click to collapse
Yes it has black borders
Sent from my Redmi K20 Pro using XDA Labs

I have hydrogel AND Nillkin 2.5D double protection.
Sent from my Redmi K20 Pro using Tapatalk

Hey guys and gals,
Has anybody tried a frosted/matte/anti-glare screen protector with the 9T PRO/K20 Pro? Which one?
Have you noticed any changes with the performance of the fingerprint sensor?
Thanks!

maddy143ded said:
I am using The Ringke Red Case, along with a generic Hydragel screen Protector from AliExpress (₹65). Till now my phone has had atleast 6-7 falls of which 2 were serious enough to stop the heart but zero bumps or cracks...
I haven't felt the need for over priced screen protectors from Glazedinc or anyone else...
Previously i used to use S-sheildz (Origin of GadetshieldZ from USA). Had to use water to apply the film but it was good enough that in my 7+ years of using them never had a screen scratch.... Or crack.. But can't find a source anymore. And Don't want pay more then 200 per screen guard....
Click to expand...
Click to collapse
Which Hydrogel link?

scarmage said:
Where did you buy that? I have Nillkin tempered glass screen 0.2mm from Amazon India. It doesn't cover the whole screen. It doesn't even cover the display area completely. It also has halo around the edges even though I went to mobile phone store and asked them to apply the screen protector.
This is in fact my 3rd screen protector. I applied 2 others - one which had black edge which covered part of the display, and second one without black edges which also didn't cover the entire display.
I've also bought a set of 2 from GearBest, but I haven't applied it as it's the same size as the Nillkin one.
2 more on the way from Aliexpress, but I'm not too hopeful about them either. I don't want to take chance with another Nillkin, but you've found one that covers the entire screen and the edges stick properly as well, then I'd like to try it.
Click to expand...
Click to collapse
Hmm I bought in lazada which is like aliexpress but for my country the 0.33mm one doesn't breakf easily and I understand what you mean by not fitting fully it does have like a gap of few cm of the edges. But a case solves this. I am using spoken case btw. it doesn't have the rainbow effect though. When I got it and install I just push the bubbles out from the side the rainbow effect is gone. Idk maybe different place they use different kind of glass. I am using Redmi k20 pro btw

Related

Tempered glass screen protector

Just ordered a 6x, do someone know something about a good tempered glass screen protector?
Is the screen flat or curved on the edges?
flat protector https://www.amazon.co.uk/Protector-APICI-Tempered-Hardness-Anti-fingerprint/dp/B01MG9MLRJ
Thank you, I also found some by googling, I ask about something someone tried.
Sent from my Nexus 6 using XDA-Developers Legacy app
Mine came with some kind of screen protector already stuck on the screen. Also seems to be fairly stubborn to remove, did anyone else's come delivered with it?
Would prefer to have a tempered one, but the one currently on there seems to be made of glass already.
Mvs1989 said:
Mine came with some kind of screen protector already stuck on the screen. Also seems to be fairly stubborn to remove, did anyone else's come delivered with it?
Would prefer to have a tempered one, but the one currently on there seems to be made of glass already.
Click to expand...
Click to collapse
It's probably a plastic PET screen protector, which has really strong glue on it. I doubt Honor would supply their devices with a tempered glass screen protector straight out the box.
My must arrive on Monday, I hope that there will be a protection like on yours..
Edit:
Arrived today and there is a sort of hard protection on the display, not glass but probably policarbonate, invisible.
Sent from my Nexus 6 using XDA-Developers Legacy app
Ordered a tempered glass screen protector from nilkin.org, but after paying i noticed the payment going to some russian name, but nilkin is asian as far as i know.
Also, some reviews on google classify this website as a fake / scam.
So for now, avoid nilkin.org.
The official website doesnt list any honor 6x support, so i'll have to wait and see if what gets delivered actually fits, if it even arrives/was sent at all.
i bought the mr shield
https://www.amazon.com/gp/product/B01M74TFP9/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
didnt like it at all.
if you notice the plastic one that the phone came with it does not cover the screen completely { about 1mm on each side }.
mr shield is exactly the same. makes the phone look bad. im returning this and waiting for someone to make the screen protector correctly
towncarblue said:
i bought the mr shield
https://www.amazon.com/gp/product/B01M74TFP9/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
didnt like it at all.
if you notice the plastic one that the phone came with it does not cover the screen completely { about 1mm on each side }.
mr shield is exactly the same. makes the phone look bad. im returning this and waiting for someone to make the screen protector correctly
Click to expand...
Click to collapse
Thanks for sharing
mine had tempered glass on it already..so no issue faced for this
If you're talking about the screen protector from the factory, it's not glass, just a plastic. It's a finger print magnet for sure too. I ordered one of the newer styles that just came on Amazon. Will update with my thoughts when I comes in in a day or so.
Sent from my Nexus 6P using Tapatalk
madeSICC said:
If you're talking about the screen protector from the factory, it's not glass, just a plastic. It's a finger print magnet for sure too. I ordered one of the newer styles that just came on Amazon. Will update with my thoughts when I comes in in a day or so.
Click to expand...
Click to collapse
Mine was gifted by Huawei in China and had tempered glass.
Does it leave big gaps around the edges or is it more of a full edge style?
Sent from my Nexus 6P using Tapatalk
madeSICC said:
Does it leave big gaps around the edges or is it more of a full edge style?
Click to expand...
Click to collapse
More gaps at edges
Got this one in the mail today: https://www.amazon.com/dp/B01MU7Y0EG/ref=cm_sw_r_cp_apa_40KIyb6NMD2N9
I wanted to try a more edge to edge one and this one is really close. But you do get the raised edges as the curved glass starts. I will see how much it collects dust and probably remove it. It's my wife's phone so she probably won't like it.
Sent from my Nexus 6P using Tapatalk
madeSICC said:
Got this one in the mail today: https://www.amazon.com/dp/B01MU7Y0EG/ref=cm_sw_r_cp_apa_40KIyb6NMD2N9
I wanted to try a more edge to edge one and this one is really close. But you do get the raised edges as the curved glass starts. I will see how much it collects dust and probably remove it. It's my wife's phone so she probably won't like it.
Click to expand...
Click to collapse
Thanks for sharing
Mvs1989 said:
Ordered a tempered glass screen protector from nilkin.org, but after paying i noticed the payment going to some russian name, but nilkin is asian as far as i know.
Also, some reviews on google classify this website as a fake / scam.
So for now, avoid nilkin.org.
The official website doesnt list any honor 6x support, so i'll have to wait and see if what gets delivered actually fits, if it even arrives/was sent at all.
Click to expand...
Click to collapse
Update:
The screenprotector just came in and is the correct one. Unfortunately the same problem persist with the 2.5d glass, the protector doesn't go edge to edge.
So, nillkin.org seems to be legit (enough) to order from. The screen protector box just used a variation on the name 'honor 6x', namely 'Huawei Mate 9 Lite GR5 2017', which is apparently the same phone .
Do not buy
DO NOT BUY.
just got this one from amazon today
https://www.amazon.com/gp/product/B01MR65JJD/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
it broke during installation, the slightest movement destroys it. the material is not really good at all.
i have a TUDIA Slim-Fit HEAVY DUTY case and the protector and there is a small gap between the case and the screen protector.
if the installation would have been successful, doubt it would last more than a day .
gotta keep looking
another do not buy...
the toshion screen protector.
https://www.amazon.com/gp/product/B01M2BM9H4/ref=od_aui_detailpages00?ie=UTF8&psc=1
does not even cover the screen , box reads 6x but i dont think its for a 6x or they really messed up their measurements
use this from amazon.in
http://amzn.to/2k6aTOW

May I know which tempered glass screen protector I should order ?

May I know which tempered glass screen protector I should order from eBay or Amazon.ca which will attract less finger print?
There are not any really good ones because of the curved screen. You either are going to have it peel a bit on the edges or the screen protector will be cut well short of the sides.
I went with this film one and although I wanted glass I am happy with it
https://www.amazon.com/gp/product/B01M700TQ2/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
there all terrible tried 5 now not one any good, the film ones are no good for me as there offer no protection from impact..
I'm happy with this.
I use this. http://www.ebay.com/itm/25266402845...49&var=551590088571&ssPageName=STRK:MEBIDX:IT
Ready to have this and sit the dimensions well. https://fr.aliexpress.com/item/Pzoz...663571.html?shortkey=UfIVFz2q&addresstype=600
gomcse2002 said:
May I know which tempered glass screen protector I should order from eBay or Amazon.ca which will attract less finger print?
Click to expand...
Click to collapse
This is the one I am using after trying several different tempered glass. It's not edge to edge but since it so thin you can barely see the gap. The best part is no halo effect and it's super responsive.
http://www.protectionfilms24.com/ar...en-protector-clear-huawei-mate-9-2729860.html
Here's a review on youtube
https://www.youtube.com/watch?v=zEpMWkIPqyQ
I'm on my second Brotect. Didn't like them the first time around but they have grown on me. I don't think they'd offer as much impact protection as a thicker tg, but they also fit and look better on a 2.5d screen.
Sent from my MHA-L29 using Tapatalk
I went with the Supershieldz from Amazon and it has been good for me, works with 3 different case I have tried.
https://www.amazon.com/gp/product/B01N6BCXDJ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Amazon Mr Shield For Huawei Mate 9
I have the newest Nillkin and it is a bit oversized, which leaves a halo around the edges. Not bad when the screen is on, but very noticeable when the screen is dark. That being said, it did save my bacon this morning. I dropped my phone from about 4 foot up(bobbled the catch) straight onto concrete... it landed on a corner and fell flat on the face. The screen protector did it's job and saved the display. The protector now has a very nice diagonal crack running the entire width, but it still works. Unfortunately, it means I need to buy a new one as Nillkin only provides one in the package. So it is off to Amazon to order my old standby, the SuperShieldz
Okiera29 said:
I have the newest Nillkin and it is a bit oversized, which leaves a halo around the edges. Not bad when the screen is on, but very noticeable when the screen is dark. That being said, it did save my bacon this morning. I dropped my phone from about 4 foot up(bobbled the catch) straight onto concrete... it landed on a corner and fell flat on the face. The screen protector did it's job and saved the display. The protector now has a very nice diagonal crack running the entire width, but it still works. Unfortunately, it means I need to buy a new one as Nillkin only provides one in the package. So it is off to Amazon to order my old standby, the SuperShieldz
Click to expand...
Click to collapse
Get Mr Shield on amazon, include 2 and if you broke one only email with picture and they sent replacement free, it happen to me on Galaxy Tab A and Nexbit Robin and get both free...
Try full covdr
I installed a Cafele glass screen protector the first day i got my Mate 9 and didn't had to replace it in a year.
It's a bit oversized, so it covers the edges, and comes with a liquid that fills the ait bubbles.
You don't really see them anymore.
None of the tempered glass I bought fits to the mate 9. So I took " hydrogel" screen protector on aliexpress and it fits perfect !
Sorry for bad english ≥≤
tenson22000 said:
None of the tempered glass I bought fits to the mate 9. So I took " hydrogel" screen protector on aliexpress and it fits perfect !
Sorry for bad english ≥≤
Click to expand...
Click to collapse
This
Sent from my MHA-L29 using Tapatalk

Amazing Glass Screen Protector

So after seeing bad reviews of countless glass screen protectors, I have finally stumbled upon one that is actually fantastic and covers the entire display.
https://www.amazon.ca/ESR-Protector...2+tempered&dpPl=1&dpID=51kmkyd-p6L&ref=plSrch
I purchased this thing about a week ago and have so far been extremely satisfied. For starters it comes with a alignment tool that makes putting it on a breeze.
One benefit of this screen protector is that it is truly edge to edge, leaving about 0.75mm of space on each edge of the glass while simultaneously not cutting out any part of the display. The other benefit is that it has adhesive throughout the entire glass including the edges so no issues with the rainbow halo effect. The oleophobic coating on it is also superb. It feels EXACTLY like the original display, most glass screen protectors skimp out on this which leads them to feel a bit sticky but this one glides like the original display under it.
I installed it in under 3 minutes perfectly and there are absolutely no bubbles and the singular camera cutout is perfectly made in the correct spot. Hands down the best glass screen protector I've had for any smarthphone.
Thanks for the tip. I've ordered one on AliExpress from the same brand, costs only 5 usd
Using one for one month, just perfect and easy to apply. Very good quality and i have tried many screen protectors for mix 2 but none was as good as this one.
Vin87 said:
Thanks for the tip. I've ordered one on AliExpress from the same brand, costs only 5 usd
Click to expand...
Click to collapse
Can You add link to this screen protector? I serch but i find only to mi mix 2S. Thanks!
jankes13 said:
Can You add link to this screen protector? I serch but i find only to mi mix 2S. Thanks!
Click to expand...
Click to collapse
it is compatible with mix 2 too. and it's amazing, best one i've had
kostekzg said:
it is compatible with mix 2 too. and it's amazing, best one i've had
Click to expand...
Click to collapse
GREAT! Thanks for answer!
Hey.
I use my phone since early 2018 now.
After a few different screen protectors i gave up and use it without protector.
The phone is like a new one. I think the glass is very good and no protector is needed.
The display is very smooth to tap without one scratch on it.
Use it with full cover/case with magnetic closer.
I managed to get some hair-like fine scratches. I think your full cover helps a lot
I just shattered my ESR protector, you will never guess how. While pulling the phone out of my pocket, I somehow hooked the corner of my glass, right where the front camera is located ( here: https://imgur.com/F5Crawg ) with some loose thread in my pocket They should just make a round cutout :\
Just put mine on this morning, fits really well but 3 areas have a speck of dust under them, I put it on after getting out of the shower as the mist in the air normally keeps the dust away but not this time.
Got the esr case as well which is ok for the price.
Got them from the ESR store on AliExpress.
Sent from my Mi MIX 2 using Tapatalk
kostekzg said:
I just shattered my ESR protector, you will never guess how. While pulling the phone out of my pocket, I somehow hooked the corner of my glass, right where the front camera is located ( here: https://imgur.com/F5Crawg ) with some loose thread in my pocket They should just make a round cutout :\
Click to expand...
Click to collapse
Ruined 2 glass protector with that idiotic cut
Sent from my Mi MIX 2 using Tapatalk
Best screen protector I've ever had, and I think I've tried them all. Full glue so no weird effects, no dot matrix, perfect cut and perfect fit with the supplied tool. I'm highly impressed.
Tbh I can't understand why we need a camera cut out, just make a circular clear area.
Vin87 said:
Best screen protector I've ever had, and I think I've tried them all. Full glue so no weird effects, no dot matrix, perfect cut and perfect fit with the supplied tool. I'm highly impressed.
Tbh I can't understand why we need a camera cut out, just make a circular clear area.
Click to expand...
Click to collapse
ESR? The one in the OP?
Miso122 said:
ESR? The one in the OP?
Click to expand...
Click to collapse
Yes the ESR from the Op. I got mine from AliExpress
Vin87 said:
Yes the ESR from the Op. I got mine from AliExpress
Click to expand...
Click to collapse
thanks, got mine on plane rn
crzykiller said:
So after seeing bad reviews of countless glass screen protectors, I have finally stumbled upon one that is actually fantastic and covers the entire display.
https://www.amazon.ca/ESR-Protector...2+tempered&dpPl=1&dpID=51kmkyd-p6L&ref=plSrch
I purchased this thing about a week ago and have so far been extremely satisfied. For starters it comes with a alignment tool that makes putting it on a breeze.
One benefit of this screen protector is that it is truly edge to edge, leaving about 0.75mm of space on each edge of the glass while simultaneously not cutting out any part of the display. The other benefit is that it has adhesive throughout the entire glass including the edges so no issues with the rainbow halo effect. The oleophobic coating on it is also superb. It feels EXACTLY like the original display, most glass screen protectors skimp out on this which leads them to feel a bit sticky but this one glides like the original display under it.
I installed it in under 3 minutes perfectly and there are absolutely no bubbles and the singular camera cutout is perfectly made in the correct spot. Hands down the best glass screen protector I've had for any smarthphone.
Click to expand...
Click to collapse
There is a white frame and black frame available. Which one did you choose? . . . and is there a case that would be most compatible with this rounded edge protector?
ESR
Well, ESR glasss has the best oleofobic coating and clearness. No rainbow efect too, it has gule on the whole surface. Just that nowel plastic frame needs some practice to get use to it. There are no gaps between it and the glass on all sides , when install. The glue is really strong. I am siprised that somebody managed to stisck something between glass and screen.
My ESR protector died after a couple months of use. First some scratches appeared (the protector is softer than the screen) and on one of those scratches (a deeper one on the edge) the protector cracked. Removal was not that easy as the force required to pull it of will result in a shattered protector everywhere so expect lots of glass dust. I've ordered a new one together with a ESR case (that fits lovely too). These things are so cheap anyway that I don't mind going through a couple of them each year.
Just got the ESR case and screen protector. Thanks for the recommendation, this screen protector feels and looks like there is no protector at all, no more smudges over the original screen. The perfect application from the bracket and adhesive across the entire protector makes it the best one I've used, after giving up on covering my mix 2 after 3-4 different protectors giving neuton rings and immediately thrown out. I have probably dropped my mix 2 on the pavement 7 or 8 times in the last year getting out of my car, and only got a tiny crack on the bottom bezel corner of the screen. Since the bottom bezel on the ESR protector is black my phone looks undamaged now.
The ESR case is nearly as good as the one in the box. I do notice it's slightly thicker than the case in the box, and the added bottom protection makes the phone slightly longer, but it's overall an exceptional fit.
I got mine from taobao directly.
https://detail.tmall.com/item.htm?id=544415913057&spm=a1z09.2.0.0.1be12e8dZtBmgW&_u=i23vb00o11c6
3-protector for 39 CNY, with a free silicon case (very ****ty).
This protector have soft edges to fit the curved screen edge, perfect for my case.

Is there an actual full screen protector for poco f2 pro?

Every one i try is severely undersized. The nillkin one is so small it doesn't even properly cover the active screen area side to side. It's like it was made for k20...
I need something that covers the whole thing along with side curve so it doesn't make gestures from sides or bottom problematic.
Preferably thin glass.
przemo-c said:
Every one i try is severely undersized. The nillkin one is so small it doesn't even properly cover the active screen area side to side. It's like it was made for k20...
I need something that covers the whole thing along with side curve so it doesn't make gestures from sides or bottom problematic.
Preferably thin glass.
Click to expand...
Click to collapse
I am using Smartdevil brand. There are at least 2 variants, non full coverage and full coverage.
I am having the non full coverage, quite good in my opinion as it has no issue with Ringke or Xunnd case. Gesture is working fine too
Other people who use full coverage, usually has issue a bit with case as it is a tight fit.
Sent from my POCO F2 Pro using Tapatalk
creezalird said:
I am using Smartdevil brand. There are at least 2 variants, non full coverage and full coverage.
I am having the non full coverage, quite good in my opinion as it has no issue with Ringke or Xunnd case. Gesture is working fine too
Other people who use full coverage, usually has issue a bit with case as it is a tight fit.
Sent from my POCO F2 Pro using Tapatalk
Click to expand...
Click to collapse
Thanks!
Can't see Smartdevil brand anything in my country for poco f2 pro. But i've seen multiple items with warning about fit in the case. Perhaps that could be a good marker of full coverage glass.
I didn't have any issue with gestures from side not working on 2 protectors i've tried but the feel of starting at the edge then going onto the protector is not a good feel.
Nor is the nillkin so narrow that the rounded side edge creates rainbow effects when looking at the screen.
przemo-c said:
Thanks!
Can't see Smartdevil brand anything in my country for poco f2 pro. But i've seen multiple items with warning about fit in the case. Perhaps that could be a good marker of full coverage glass.
I didn't have any issue with gestures from side not working on 2 protectors i've tried but the feel of starting at the edge then going onto the protector is not a good feel.
Nor is the nillkin so narrow that the rounded side edge creates rainbow effects when looking at the screen.
Click to expand...
Click to collapse
Have you tried searching in Aliexpress or Ebay? Usually something from China. The Smartdevil comes with a frame tool, so that you will install the protector correctly.
I can also still feel the side edges, but it is almost flushed with the Ringke case, and it it slightly curved, so it is at least a good feel. No rainbow at side edges. From top view, almost cannot realize the protector (with case installed).
creezalird said:
Have you tried searching in Aliexpress or Ebay? Usually something from China. The Smartdevil comes with a frame tool, so that you will install the protector correctly.
I can also still feel the side edges, but it is almost flushed with the Ringke case, and it it slightly curved, so it is at least a good feel. No rainbow at side edges. From top view, almost cannot realize the protector (with case installed).
Click to expand...
Click to collapse
Yeah i saw some on banggod but i wanted to first get some quick.
The rainbow on nillkin was because it was so narrow part of the curved was on top of lit area. As for edge nillkin had pretty good filleting on the edge... it was just htat it was 2mm from the edge of the flat portion of the screen ... if it was right up to the edge it would have been just fine.
Also i prefer thinner glass both for the feel and heat dissipation . As i'm really happy of how well poco f2 dissipates heat while charging at high current compared to 9t pro. Wouldn't want to obstruct it further.
Also i will be using it without any case But i'm fine with some edge as long as it's actually at the edge
Any issues with the under screen finger print scanner using glass screen protector?
originalwoodster said:
Any issues with the under screen finger print scanner using glass screen protector?
Click to expand...
Click to collapse
i would say depends on quality/thickness of the glass. I do not have an issue with my fingerprint scanner. though sometimes need to scan 2-3 times.
Sent from my POCO F2 Pro using Tapatalk
przemo-c said:
Every one i try is severely undersized. The nillkin one is so small it doesn't even properly cover the active screen area side to side. It's like it was made for k20...
I need something that covers the whole thing along with side curve so it doesn't make gestures from sides or bottom problematic.
Preferably thin glass.
Click to expand...
Click to collapse
Currently using the Nillkin XD CP+MAX Full coverage tempered glass
http://global.nillkin.com/goodsdetail.aspx?id=4854
Its about 0.3mm in thickness.
Please take note that full screen protectors might be incompatible with cases with hefty raised edges.
I also recommend this Screen Protector.
Its not full screen but more case friendly.
https://www.amazon.com/*******-Screen-Protector-Including-Install/dp/B089GFY99F
package includes :
2 pcs screen protector
1 pcs camera lens screen protector
1 pcs carbon fiber skin protector for the back
frame tool for easy installation.
ryaneu said:
Currently using the Nillkin XD CP+MAX Full coverage tempered glass
http://global.nillkin.com/goodsdetail.aspx?id=4854
Its about 0.3mm in thickness.
Please take note that full screen protectors might be incompatible with cases with hefty raised edges.
Click to expand...
Click to collapse
Thanks for the tip ! I installed it and works great. Covers the full screen, and the coating is really good.
I've used this brand before on my F1 and was impressed by them . And I've now got one on my f2 . Fits the full screen without any air gap round the border . Oleophobic coating is good as well .
https://www.amazon.co.uk/dp/B0899Y9LB6/ref=cm_sw_r_cp_apa_i_6KAiFbTVPR6AC
muzzz33 said:
I've used this brand before on my F1 and was impressed by them . And I've now got one on my f2 . Fits the full screen without any air gap round the border . Oleophobic coating is good as well .
Click to expand...
Click to collapse
Can I find it in the Aliexpress & US's website ?
https://www.amazon.com/dp/B0876G3YY8/ref=cm_sw_r_cp_apa_i_I1OjFbCBYCT60
Just got this one... Covers the full screen.
Sent from my POCO F2 Pro using XDA Labs
I use an Amazon QULLOO tempered glass for my ex-Motorola One Fusion+ and it perfectly fits here..lol
maybe the sensor is less performing..gotta do some experience
przemo-c said:
Every one i try is severely undersized. The nillkin one is so small it doesn't even properly cover the active screen area side to side. It's like it was made for k20...
I need something that covers the whole thing along with side curve so it doesn't make gestures from sides or bottom problematic.
Preferably thin glass.
Click to expand...
Click to collapse
Nillkin Amazing XD CP+ Max tempered glass screen protector for Xiaomi Redmi K30 Pro, Poco F2 Pro, Xiaomi Redmi K30 Ultra, K30 Extreme Commemorative Edition
https://nillkin.org/smartphones-accessories/xiaomi-phones-accessories/xiaomi-redmi-k30-pro-accessories/nillkin-xiaomi-redmi-k30-pro-xd-cp-max
What a difference between this one:
https://nillkin.org/smartphones-acc...sories/nillkin-xiaomi-redmi-k30-pro-xd-cp-max
and :
https://nillkin.org/smartphones-acc...cessories/nillkin-xiaomi-redmi-k30-pro-cp-pro
ryaneu said:
Currently using the Nillkin XD CP+MAX Full coverage tempered glass
http://global.nillkin.com/goodsdetail.aspx?id=4854
Its about 0.3mm in thickness.
Please take note that full screen protectors might be incompatible with cases with hefty raised edges.
Click to expand...
Click to collapse
Thanks for this one. Ordered the same and it's really great
sebj84 said:
Thanks for this one. Ordered the same and it's really great
Click to expand...
Click to collapse
Hey man! I know I'm late to the party, but I was wondering if you could help me out...
Do black borders on Nillkin XD CP+ Max cover actual display?
Heard that those type of protectors usually "shrink" display size by few pixels so I was wondering if that's the case here as well. I'm in search for a good screen protector and it would help a lot. Thanks! : )
bluesbvt said:
Hey man! I know I'm late to the party, but I was wondering if you could help me out...
Do black borders on Nillkin XD CP+ Max cover actual display?
Heard that those type of protectors usually "shrink" display size by few pixels so I was wondering if that's the case here as well. I'm in search for a good screen protector and it would help a lot. Thanks! : )
Click to expand...
Click to collapse
The Nilkin as said is a great deal. Looks actually as you would have no protector, while it really covers fully and the black borders are same size as on the phone.
It looks lime you have no protector.
bluesbvt said:
Hey man! I know I'm late to the party, but I was wondering if you could help me out...
Do black borders on Nillkin XD CP+ Max cover actual display?
Heard that those type of protectors usually "shrink" display size by few pixels so I was wondering if that's the case here as well. I'm in search for a good screen protector and it would help a lot. Thanks! : )
Click to expand...
Click to collapse

Film Screen Protectors

Just wondering if anyone knows where to buy decent FILM screen protectors from for the Redmi Note 9S.
The one that came with the phone is the type I mean. I hate the tempered glass type, they only ever last me a week or so before a crack appears somewhere.
It seems like film protectors are easy to find for other phones but not Xiaomi models.
Thanks in advance.
galaxy6220 said:
Just wondering if anyone knows where to buy decent FILM screen protectors from for the Redmi Note 9S.
The one that came with the phone is the type I mean. I hate the tempered glass type, they only ever last me a week or so before a crack appears somewhere.
It seems like film protectors are easy to find for other phones but not Xiaomi models.
Thanks in advance.
Click to expand...
Click to collapse
Nillkin , it's cool
galaxy6220 said:
Just wondering if anyone knows where to buy decent FILM screen protectors from for the Redmi Note 9S.
The one that came with the phone is the type I mean. I hate the tempered glass type, they only ever last me a week or so before a crack appears somewhere.
It seems like film protectors are easy to find for other phones but not Xiaomi models.
Thanks in advance.
Click to expand...
Click to collapse
xtremeguard is a great film...been using ewm on my last 3 phones....be sure to search for coupon codes
Any suggestions for tempered glass
almir1984 said:
Any suggestions for tempered glass
Click to expand...
Click to collapse
I'm not gonna recommend something but rather not recommend something which is the nillkin CP+ Max XD, it's a decent tempered glass honestly, but the black border is honestly too thick. It covers your screen just fine, but then you'll sacrifice a tiny bit of your screen being blocked by that thick black border. and also my sensors just can't function properly because of the stupid black border.
I'm ordering a few screen protectors that hopefully will fit my need. I ordered Nillkin CP+ Pro (the black border is a tat thinner than the XD), ringke dual easy film, and the last one is I guess some local product named Uneed hybrid pro glass. The last two are some kinda of film protector or in here we call them "hidrogel".

Categories

Resources