Database Info

What's the best screen protector for the Galaxy S?

I'm looking for a clear screen protector with a cutout for the front camera. It needs to perfectly cover the screen. Does anyone here have any recommendations for one to get?

lsquare said:
I'm looking for a clear screen protector with a cutout for the front camera. It needs to perfectly cover the screen. Does anyone here have any recommendations for one to get?
Click to expand...
Click to collapse
perhaps you could spend a few min browsing trough the screen protector thread.
plenty of revies of what ppl like.

i'm using many freebies ones that are very good, but..........
traces of oil from my face and fingers are horrible
on the other Screen Protector topic, some one mentioned a brand that is SUPPOSEDLY Anti Oil resistant

The best screen protector is already on it. Gorilla Glass!
Otherwise I just use one of those 5 for a couple of quid on ebay. Not bad at all.

Case
Hello,
I bought a really nice case for only 7 euro's (https://www.b2ctelecom.nl/CASETSI901/silicone-hoesje-voor-samsung-i9000-galaxy-s-white-tsi-tp.html). I am very happy with the case, it fits perfectly.
I also bought this screenprotor: https://www.b2ctelecom.nl/MIRRSI900...en-protector-voor-samsung-i9000-s-galaxy.html but this is not a good one. It looks like the screen is darker and putting this on you don't get the fulle benefit of the super screen
This shop has more goodies for your Galaxy S (see https://www.b2ctelecom.nl/p/10/mid/3/tid/1312/samsung-s-i9000-galaxy.html)
Good luck
Thijs

I prefer to go naked. Clear screen protectors are fingerprint magnet, and matt screen protectors look bad. There's no in between.

snapper.fishes said:
I prefer to go naked. Clear screen protectors are fingerprint magnet, and matt screen protectors look bad. There's no in between.
Click to expand...
Click to collapse
Gotta agree with that.

I'd put a protector on if I were you. Don't learn the hard way like myself. I was going naked screen for a bit and as every day went by I was confident the screen was not going to get a scratch.
Then I accidently shoved the USB cable with my phone in my pocket and bang - scratched it. Just a small one, but enough to be seen in reflection.
Better a screen protector get scratched and replaced rather than the screen have an unrepairable scratch for it's life.

FITRS said:
I'd put a protector on if I were you. Don't learn the hard way like myself. I was going naked screen for a bit and as every day went by I was confident the screen was not going to get a scratch.
Then I accidently shoved the USB cable with my phone in my pocket and bang - scratched it. Just a small one, but enough to be seen in reflection.
Better a screen protector get scratched and replaced rather than the screen have an unrepairable scratch for it's life.
Click to expand...
Click to collapse
For sure I'm going to get a screen protector. I just find it funny how some people would bother posting in this thread telling me to go naked when I've clearly made up my mind. The glass is scratch resistant and not scratch proof. Like you, I also stuff coins and other small items into my pocket in addition to my cellphone so I wouldn't be surprised if scratches form if there's no protection on the screen.

SGP Steinheil Ultra Crystal
or
SGP Ultra Oleophobic Film

I give the thumbs up for the SGP Ultra Oleophobic Film as well. I'm usually it right now and think it's probably the best one I've used on any phone so far. Extremely clear, smooth, and responsive. And easy to clean!

Ptechnix said:
I give the thumbs up for the SGP Ultra Oleophobic Film as well. I'm usually it right now and think it's probably the best one I've used on any phone so far. Extremely clear, smooth, and responsive. And easy to clean!
Click to expand...
Click to collapse
Where did you bought yours from? Does it have a cut out for the front camera?

You can get them on ebay for a decent price. They don't have a cut out for the front camera but I don't mind that.

Ptechnix said:
I give the thumbs up for the SGP Ultra Oleophobic Film as well. I'm usually it right now and think it's probably the best one I've used on any phone so far. Extremely clear, smooth, and responsive. And easy to clean!
Click to expand...
Click to collapse
+1, I am really satisfied with it. Too sad there was no cover for the back camera in the package.

I bought a Case mate case for it which comes with a screen protector. case will hopefully arrive today, so I'm hoping the screen protector is a good one

lsquare said:
Where did you bought yours from? Does it have a cut out for the front camera?
Click to expand...
Click to collapse
There's no cut out for the front camera but in all honesty, the shield presents no discernible degradation in front camera quality.
I got mine from Cretouch, but you can also find it available from SGP eBay resellers or SGPcraft themselves.
The oleophobic properties of the screen aren't as pronounced as I would like, but it still beats non-oleophobic screens. I was using the Martin Fields protector prior to this one which was excellent in terms of clarity, but it looked like a greased pig had gone to town on it after you were done playing with it.

i recently received my galaxy and made sure i got myself a good screen protector. after all everyone raves about the screen and i'm sure after a 2 year contract it's going to have a few marks without one.
i bought a Martin Fields Overlay. Not cheap but more than happy with it, I've used the cheap ones from ebay on other phones and they definitely aren't as good.
it includes a cover for the camera lense as well.
sorry new account so cant post direct link, just google martin fields screen protectors.

I put the Invisible Screen on the 2 i9000's we have and am happy given the circumstances. The protector certainly holds some oil and grim but it's easily cleaned. I'm willing to deal with the cleaning for a scratch-free screen.
Screen protector only (what I did)
http://cgi.ebay.ca/INVISIBLE-Screen...324142?pt=PDA_Accessories&hash=item5adb6baf2e
Full body protector
http://cgi.ebay.ca/FULL-BODY-Screen...635151?pt=PDA_Accessories&hash=item563ee8da8f
[EDIT] forgot to add that the protector DOES have a cut-out for the front facing camera

Why would you want a screen protector when you already have gorilla glass. It doesn`t scratch that easily. It`s not resistive touch screen. It`s capacitive and it`s gorilla glass. Enjoy the clear display without worries is my suggestion.

i have copter, the same as IS and it looks like crap! Wonder if its the pentile that creates interferance patterns... IS looks good on lcd

May I know which tempered glass screen protector I should order ?

May I know which tempered glass screen protector I should order from eBay or Amazon.ca which will attract less finger print?

There are not any really good ones because of the curved screen. You either are going to have it peel a bit on the edges or the screen protector will be cut well short of the sides.
I went with this film one and although I wanted glass I am happy with it
https://www.amazon.com/gp/product/B01M700TQ2/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

there all terrible tried 5 now not one any good, the film ones are no good for me as there offer no protection from impact..

I'm happy with this.
I use this. http://www.ebay.com/itm/25266402845...49&var=551590088571&ssPageName=STRK:MEBIDX:IT
Ready to have this and sit the dimensions well. https://fr.aliexpress.com/item/Pzoz...663571.html?shortkey=UfIVFz2q&addresstype=600

gomcse2002 said:
May I know which tempered glass screen protector I should order from eBay or Amazon.ca which will attract less finger print?
Click to expand...
Click to collapse
This is the one I am using after trying several different tempered glass. It's not edge to edge but since it so thin you can barely see the gap. The best part is no halo effect and it's super responsive.
http://www.protectionfilms24.com/ar...en-protector-clear-huawei-mate-9-2729860.html
Here's a review on youtube
https://www.youtube.com/watch?v=zEpMWkIPqyQ

I'm on my second Brotect. Didn't like them the first time around but they have grown on me. I don't think they'd offer as much impact protection as a thicker tg, but they also fit and look better on a 2.5d screen.
Sent from my MHA-L29 using Tapatalk

I went with the Supershieldz from Amazon and it has been good for me, works with 3 different case I have tried.
https://www.amazon.com/gp/product/B01N6BCXDJ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

Amazon Mr Shield For Huawei Mate 9

I have the newest Nillkin and it is a bit oversized, which leaves a halo around the edges. Not bad when the screen is on, but very noticeable when the screen is dark. That being said, it did save my bacon this morning. I dropped my phone from about 4 foot up(bobbled the catch) straight onto concrete... it landed on a corner and fell flat on the face. The screen protector did it's job and saved the display. The protector now has a very nice diagonal crack running the entire width, but it still works. Unfortunately, it means I need to buy a new one as Nillkin only provides one in the package. So it is off to Amazon to order my old standby, the SuperShieldz

Okiera29 said:
I have the newest Nillkin and it is a bit oversized, which leaves a halo around the edges. Not bad when the screen is on, but very noticeable when the screen is dark. That being said, it did save my bacon this morning. I dropped my phone from about 4 foot up(bobbled the catch) straight onto concrete... it landed on a corner and fell flat on the face. The screen protector did it's job and saved the display. The protector now has a very nice diagonal crack running the entire width, but it still works. Unfortunately, it means I need to buy a new one as Nillkin only provides one in the package. So it is off to Amazon to order my old standby, the SuperShieldz
Click to expand...
Click to collapse
Get Mr Shield on amazon, include 2 and if you broke one only email with picture and they sent replacement free, it happen to me on Galaxy Tab A and Nexbit Robin and get both free...

Try full covdr

I installed a Cafele glass screen protector the first day i got my Mate 9 and didn't had to replace it in a year.
It's a bit oversized, so it covers the edges, and comes with a liquid that fills the ait bubbles.
You don't really see them anymore.

None of the tempered glass I bought fits to the mate 9. So I took " hydrogel" screen protector on aliexpress and it fits perfect !
Sorry for bad english ≥≤

tenson22000 said:
None of the tempered glass I bought fits to the mate 9. So I took " hydrogel" screen protector on aliexpress and it fits perfect !
Sorry for bad english ≥≤
Click to expand...
Click to collapse
This
Sent from my MHA-L29 using Tapatalk

Amazon tempered glass screen protectors

I found this one, wondering if anyone tried this one yet....?
[3 PACK] Essential Phone Screen Protector, LK [Tempered Glass] with Lifetime Replacement Warranty https://www.amazon.com/dp/B072NB1NJY/ref=cm_sw_r_fm_apa_ZweTzbDZHA8MB

Yes. It's not good.

808phoneaddict said:
I found this one, wondering if anyone tried this one yet....?
[3 PACK] Essential Phone Screen Protector, LK [Tempered Glass] with Lifetime Replacement Warranty https://www.amazon.com/dp/B072NB1NJY/ref=cm_sw_r_fm_apa_ZweTzbDZHA8MB
Click to expand...
Click to collapse
Right now all the screen protectors are bad.
Until they come up with a new and improved version, assume all are bad.
I've tried two on Amazon and got the exact same results.
I asked for and received a refund both times.

tech_head said:
Right now all the screen protectors are bad.
Until they come up with a new and improved version, assume all are bad.
I've tried two on Amazon and got the exact same results.
I asked for and received a refund both times.
Click to expand...
Click to collapse
Which 2 brands have you tried?

808phoneaddict said:
Which 2 brands have you tried?
Click to expand...
Click to collapse
This company says they only cover the flat part of the screen. Lie.
https://smile.amazon.com/gp/product/B074M7S4HR/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
This one just claims a perfect fit.
https://smile.amazon.com/gp/product/B0747911H7/ref=oh_aui_detailpage_o02_s02?ie=UTF8&psc=1
Neither fits.

tech_head said:
This company says they only cover the flat part of the screen. Lie.
https://smile.amazon.com/gp/product/B074M7S4HR/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
This one just claims a perfect fit.
https://smile.amazon.com/gp/product/B0747911H7/ref=oh_aui_detailpage_o02_s02?ie=UTF8&psc=1
Neither fits.
Click to expand...
Click to collapse
Thank you for pointing it out. I (and other probably) appreciate the info. Ill definitely spread the word if I find one that works, or doesn't!

I returned these based on the reviews. No phone yet so didnt test myself, but why wait to be even further disappointed
https://www.amazon.com/gp/product/B071XHTLGR/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

https://www.amazon.com/gp/product/B073ZBNLMB/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
That's the only decent screen protector that fits right now. There's also a matte finish one. It's not tempered glass, but you get 8. The fit is much better than all of the tempered glass ones on Amazon. It's not 100% perfect as tiny bit of the edge don't stick but you won't notice from the distance unlike the current tempered glass.

heyitsrj said:
https://www.amazon.com/gp/product/B073ZBNLMB/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
That's the only decent screen protector that fits right now. There's also a matte finish one. It's not tempered glass, but you get 8. The fit is much better than all of the tempered glass ones on Amazon. It's not 100% perfect as tiny bit of the edge don't stick but you won't notice from the distance unlike the current tempered glass.
Click to expand...
Click to collapse
If any part of a screen protector doesn't stick then all manner of stuff will get stuck in between. For those w/ colored borders, that's not much of an issue but completely clear ones will eventually show all the dust and stuff on it.

I'm waiting this protectors "http://www.skinomi.com/essential-ph-1.html"
Only avalaible the 10/05/2017
i'll buy this model "http://www.skinomi.com/sk31879-ph-1-phone-skin-protector.html"

benshoes said:
I'm waiting this protectors "http://www.skinomi.com/essential-ph-1.html"
Only avalaible the 10/05/2017
i'll buy this model "http://www.skinomi.com/sk31879-ph-1-phone-skin-protector.html"
Click to expand...
Click to collapse
I don't like the feel of this stuff on the screen. It doesn't feel smooth.
It's 3M Urethane film. I have it on the front of my cars.

Ok don't try this one
Definite halo on this one
[3 PACK] Essential Phone Screen Protector, LK [Tempered Glass] with Lifetime Replacement Warranty https://www.amazon.com/dp/B072NB1NJY/ref=cm_sw_r_cp_apa_fHJUzb4M12ED5

The essential screen isn't flat. I don't see a viable glass protector coming. It'd have to be super thin with a really strong adhesive to make it stick to the sides.

foodplz said:
The essential screen isn't flat. I don't see a viable glass protector coming. It'd have to be super thin with a really strong adhesive to make it stick to the sides.
Click to expand...
Click to collapse
Actually much like the iPhone, it's flat until you get to the edge.
If the current round of protectors was 2mm smaller they would fit.
But for me, it doesn't matter.
I'm returning the phone.

There's still a thin bezel on the side that can handle adhesive on it so if they release one with black borders, I'd get it as the black borders won't show the halo effect even if it's not completely stuck on the outer edges. That's what I have on my iPhones. The display area is glass while the borders are plastic so they flex more.

gqukyo said:
There's still a thin bezel on the side that can handle adhesive on it so if they release one with black borders, I'd get it as the black borders won't show the halo effect even if it's not completely stuck on the outer edges. That's what I have on my iPhones. The display area is glass while the borders are plastic so they flex more.
Click to expand...
Click to collapse
Jus wait for the accessories to start coming out. Sounds like essential is open to 3rd parties making cases and screen protectors... So just got to hold on...this is what it sounded like from the reddit AMA

I have a Sopi 3M matte skin on the back and it helps with the grip a little but not by much... definitely helps w/ the fingerprints though... lol since it's matte, there can be visible smudges from time to time depending on how dirty/sweaty your paws are... I did read the AMA and they should've worked w/ case manufacturers long before release. I understand they want to keep it close to their vest until release (as to not tip off the competition) but they didn't ship the phone until much later than they said they would so in that time they could've sent out the outside schematics/dimensions to case manufacturers. No excuse!

The situation is the same for any devices that have curved edges. I'm not sure why companies just don't apply adhesive to the whole screen protector. A solution is using UV glue on a glass screen protector that isn't fully covered with adhesive. I've used the Whitedome on my Galaxy S8+ and it works really well. You should be able to buy the UV glue and UV lamp from Amazon and apply it to any glass screen protector. https://www.youtube.com/watch?v=8KZmF8uQESI

Screen protector - NOT tempered glass but "old school" film

Hello all, I have tried a couple of tempered glass screen protectors; I have also read many many reviews.
It seems that there is no tempered glass protector that would be full screen; fit (most) cases and does not release on the edges for all.
I actually did not mind the screen protector which was installed by 1+ when I got the phone (and I did not like the tempered glass ones I tried).
So I contacted them today asking if I could buy a couple of those. To my biggest disappointment I was advised that although I am not the first one to ask, they do not consider the included screen protector to be a "product" and so they do not sell it even if I wanted a large quantity.
I spent some time researching ebay - but most (nearly all) sellers sell only tempered glass (which I don't want). The few seller that sell films are very expensive ($10+ vs. $1 for the tempered glass). That is also surprising as the cost of the film is much less...
So, my question to you all: who has tried film screen protectors? Where did you get it from and what experience did you have?
Thank you for sharing

I personally use 3MK Flexible glass - its hibrid glass. I use it from years, now on OP6. I think its the best option for any phone
https://folie-ochronne.3mk.pl/pl/p/OnePlus-6-Nietlukace-szklo-hybrydowe-3mk-FlexibleGlass/39482

I find this to be the pretty close and its an 8 pack.
https://www.amazon.com/gp/product/B07D1HNQSK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

bamfsig45 said:
I find this to be the pretty close and its an 8 pack.
https://www.amazon.com/gp/product/B07D1HNQSK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Just ordered me a set.

Im waiting for my iqshield to be delivered next week. Got some high hopes. Gave up on tgsps as there is none currently i would be happy about. Not even the original one.

I'm thinking of getting those from gadgetshieldz. do they ship door to door? or pass it into your local post office?

Abaddon said:
I'm thinking of getting those from gadgetshieldz. do they ship door to door? or pass it into your local post office?
Click to expand...
Click to collapse
Its Door to Door only. For me, they shipped within 2 days.

bamfsig45 said:
I find this to be the pretty close and its an 8 pack.
https://www.amazon.com/gp/product/B07D1HNQSK/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
How is the fit on those? Can you possibly snap a pic of it on your phone with a case on as well?

ajsmsg78 said:
How is the fit on those? Can you possibly snap a pic of it on your phone with a case on as well?
Click to expand...
Click to collapse
I don't have one installed at the moment, testing a G-Most TPG. But the fit is pretty precise, need patience to get it even on both sides. It's case friendly.

Z51 said:
Just ordered me a set.
Click to expand...
Click to collapse
Can you please do a quick review when you got it? Right now there is one positive and one negative review on Amazon - so sharing your experience would be very valuable! Thank you

Gadgetguy2005 said:
Can you please do a quick review when you got it? Right now there is one positive and one negative review on Amazon - so sharing your experience would be very valuable! Thank you
Click to expand...
Click to collapse
will do

Might grab some of these and see what they are like https://www.ebay.co.uk/itm/3-X-For-....TR1.TRC0.A0.H0.Xoneplus+6+full+coverage.TRS0

Gadgetguy2005 said:
Can you please do a quick review when you got it? Right now there is one positive and one negative review on Amazon - so sharing your experience would be very valuable! Thank you
Click to expand...
Click to collapse
I installed it. its a little bigger than I'd like. if it were maybe 1 cm smaller all around it would be perfect fit. im sure you can align this to fit correctly, but it leaves no room for error. ill try and get a pic.

Z51 said:
I installed it. its a little bigger than I'd like. if it were maybe 1 cm smaller all around it would be perfect fit. im sure you can align this to fit correctly, but it leaves no room for error. ill try and get a pic.
Click to expand...
Click to collapse
Hmm, thats not good. Is it equally too big each way or is it just difficult to install totally centered, so its big on one side only?
A pic would help for sure.

I finally found regular PET protectors similar to the OEM ones that fit the phone well and are of good quality. I got them from here:
https://www.ebay.com/itm/5X-Ultra-Thin-Tempered-Glass-PET-Soft-HD-Screen-Protector-Film-For-OnePlus-6/163161457336?ssPageName=STRK%3AMEBIDX%3AIT&var=462326426650&_trksid=p2060353.m2749.l2649
The adhesive is pretty sticky on them so they don't lift off but it's hard to get them perfectly bubble free. The way I get these on perfect every time is put rubbing alcohol all over the screen then apply the protector and set it in place exactly centered (it's easy to move because of the alcohol) Then lightly push down on it and very lightly push out some of the alcohol so you don't see any bubbles. Then wait five minutes and peel off the front layer then lightly with a small cloth push out the rest of the bubbles. When the alcohol dries (takes about 10-15 mins) it will adhere perfectly and there will be no residue, bubbles or dust under the protector.

I've got an IQshield on my OP6 http://www.iqshield.com/iq32368-oneplus-6-phone-screen-protector.html
I tried a few TG ones and wasn't happy with any. They either didn't stick properly or had the annoying black border. The IQshield is the best protector I've tried.

The best screen protector is the soft nano TPU protectors they sell at ebay or aliexpress for a buck a piece and these cover the whole screen and can be applied wet with some soap and water.

Aakash_Aaku said:
Does it cover the entire screen or leaves a gap at the edges?
Click to expand...
Click to collapse
I know why you are asking ...Most protectors don't cover the edges well. But this does .

I got this one:
OnePlus 6 Screen Protector, IQ Shield LiQuidSkin Full Coverage Screen Protector for OnePlus 6 HD Clear Anti-Bubble Film
From Amazon.
Accidentally dropped it on a concrete slab that had small gravel and dirt all over it about a week ago. Right out of my pocket. I do have one of those Tudia cases on it with a lip, HOWEVER some of that gravel did hit the glass. Tore up the screen protector in a couple spots. They kind of look like pin pricks but no discernible cracks or knicks in the glass what so ever, and the other scratches to the screen protector went away after rubbing with my fingers.
Talk about a freak out moment.

crberus81 said:
I got this one:
OnePlus 6 Screen Protector, IQ Shield LiQuidSkin Full Coverage Screen Protector for OnePlus 6 HD Clear Anti-Bubble Film
From Amazon.
Accidentally dropped it on a concrete slab that had small gravel and dirt all over it about a week ago. Right out of my pocket. I do have one of those Tudia cases on it with a lip, HOWEVER some of that gravel did hit the glass. Tore up the screen protector in a couple spots. They kind of look like pin pricks but no discernible cracks or knicks in the glass what so ever, and the other scratches to the screen protector went away after rubbing with my fingers.
Talk about a freak out moment.
Click to expand...
Click to collapse
How is the texture and clarity of the IQ? I got a Skinomi (with has a similar product description) and personally I was not happy with the stretchy texture and less-then-smooth feel when swiping. Also, it seemed to like clarity and almost had small "webs" when looking at it at certain angles. (not bubbles)
---------- Post added at 06:47 AM ---------- Previous post was at 06:42 AM ----------
crberus81 said:
I got this one:
OnePlus 6 Screen Protector, IQ Shield LiQuidSkin Full Coverage Screen Protector for OnePlus 6 HD Clear Anti-Bubble Film
From Amazon.
Accidentally dropped it on a concrete slab that had small gravel and dirt all over it about a week ago. Right out of my pocket. I do have one of those Tudia cases on it with a lip, HOWEVER some of that gravel did hit the glass. Tore up the screen protector in a couple spots. They kind of look like pin pricks but no discernible cracks or knicks in the glass what so ever, and the other scratches to the screen protector went away after rubbing with my fingers.
Talk about a freak out moment.
Click to expand...
Click to collapse
How is the texture and clarity of the IQ? I got a Skinomi (with has a similar product description) and personally I was not happy with the stretchy texture and less-then-smooth feel when swiping. Also, it seemed to like clarity and almost had small "webs" when looking at it at certain angles. (not bubbles)

S10e screen protectors

Which one do you recommend for the S10e? Right now I'm still using the default protector which was applied by Samsung, but I don't really like it.

i ordered one on ebay but i have a feeling it's flat not edge to edge full cover for 10e. They use generic photoshopped stock photo for all 3 models and claim it's curved. I think 10e has 2.5D edge. Not completely flat. I'm also using the garbage thin film they included. For $800 scumsung could include high quality glass and case. I also ordered glass for rear cameras. Never seen or used one before. Not sure what to expect.

tried ESR tempered glass and MP mall tempered glass from amazon
both do not stick on side, ESR is off by like 0.75 mm because of 2.5D curve of glass, it does not stick on side. so dont waste your money on these two, i am still looking for one may be just a bit smaller than ESR.
temporarily ordering a film protector till i find a tempered glass which fits right.

I'm using the PureGear HD Clear Tempered Glass Screen Protector https://www.amazon.com/dp/B07P7S174H/ref=cm_sw_r_cp_apa_i_byaHCbZY5Q1N0
It only has adhesive on the edges so there is no bubbles. It is case friendly and is a decent alternative to the whitedome which remains the superior choice for the 2.5D screens.

It only has adhesive on the edges so there is no bubbles. It is case friendly and is a decent alternative to the whitedome which remains the superior choice for the 2.5D screens.
Click to expand...
Click to collapse
how is touch sensitivity and does is create rainbow effect like some tempered glass with adhesive on side do?

Keep in mind aftermarket screen protecters (especially glass ones) will have problems with the fingerprint reader.
Im using the samsung one for now until some testing and revising is done

No rainbow effect and if you increase touch sensitivity in the settings it works great. I have no real complaints.

which non-glass protector do you guys recommend?

destz0r said:
which non-glass protector do you guys recommend?
Click to expand...
Click to collapse
I am interested as well, tried both ESR screen protectors and they were both too small for the screen. doesn't look like there is a clear favorite right now

DSX2 said:
Keep in mind aftermarket screen protecters (especially glass ones) will have problems with the fingerprint reader.
Im using the samsung one for now until some testing and revising is done
Click to expand...
Click to collapse
That's only for bigger models. S10E finger scanner is on the side.
Sent from my SM-G970U1 using Tapatalk

Why is there a lip or Ridge around perimeter of screen of galaxy s10e
Does anybody know why there is a lip or Ridge around the edges of Galaxy S10e screen it's almost looks like a screen protector has been applied from the factory

willdogg78 said:
Does anybody know why there is a lip or Ridge around the edges of Galaxy S10e screen it's almost looks like a screen protector has been applied from the factory
Click to expand...
Click to collapse
Yes, that's exactly what you are seeing. The S10e does indeed have a factory installed plastic screen protector. You can really feel it around the camera as there's a cutout for the camera. I would expect it to scratch rather quickly, plus I don't think it provides nearly as much drop protection as a tempered glass one might.
I'm following along here hoping that there does wind up being an economical tempered glass screen protector that works well and doesn't life at the edges. Seems like this will be similar to my S7, where I was never really able to find something that works and just went naked.

Thank you for the response I've just been so confused with everyone saying the S10 and S10+ have one but not the S10e. I think you're right it is just a polyurethane plastic protector. And just a heads up I tried to apply a tempered glass protector over top of it and it definitely made it hard for the edges to stick.

willdogg78 said:
Thank you for the response I've just been so confused with everyone saying the S10 and S10+ have one but not the S10e. I think you're right it is just a polyurethane plastic protector. And just a heads up I tried to apply a tempered glass protector over top of it and it definitely made it hard for the edges to stick.
Click to expand...
Click to collapse
I had the same confusion. All of the media I've seen say the pre-installed one is only on the S10 and S10+, but if you look around the camera on the S10e, there's clearly a cutout that confirms there is a pre-installed screen protector on there. I'm still not exactly sure how to get it off. I picked around the edges a bit and nothing is coming up easily.
I'm not sure how well the edges of a tempered glass one will stick even if you took off the pre-installed one. I haven't seen any reports of an economical one that works yet. I think I'm going to be in the same boat as I am with my S7 and be forced to go without one.

Follow

DarkMage619 said:
I'm using the PureGear HD Clear Tempered Glass Screen Protector https://www.amazon.com/dp/B07P7S174H/ref=cm_sw_r_cp_apa_i_byaHCbZY5Q1N0
It only has adhesive on the edges so there is no bubbles. It is case friendly and is a decent alternative to the whitedome which remains the superior choice for the 2.5D screens.
Click to expand...
Click to collapse
If anyone looking for decent glass. This brand is good to go, but expensive. Might wait out a little.
Sent from my SM-G970U1 using Tapatalk

my factory installed screen protector is starting to show some scratches and wear. Getting near desperate trying to find a good affordable screen protector for the s10e

I ordered an Alinsea glass protector from amazon, sounds like a knock off of a Whitestone from their description. It doesn't have a cut out for the front facing camera, which is great, as a cut out just seems to collect pocket lint. I have not received it yet.

1
Tapatalkkal küldve az én SM-G970F eszközömről

freddie813 said:
I ordered an Alinsea glass protector from amazon, sounds like a knock off of a Whitestone from their description. It doesn't have a cut out for the front facing camera, which is great, as a cut out just seems to collect pocket lint. I have not received it yet.
Click to expand...
Click to collapse
I got one. First time doing an install of this type and given the barebones installation tools provided, it was above average difficultly. First one ended up with bubbles.