Database Info

[6.0.1][M3D91] GM 5 Plus Fastboot Stock Rom

[6.0.1][M3D91] GM 5 PLUS FASTBOOT STOCK ROM
General Mobile 5 PLUS
Android One 3rd Generation STOCK ROM
WARNING !
This ROM has been powered by forum.turkdevs.com
This software isn't shared without my permission.
Give proper credits and link to this post always.
About;
This tool is supporting English and Turkish languages.
You can install M3D91 Version Stock Rom your device. (GM 5 PLUS SINGLE SIM and DUAL SIM). And also you can open OEM (BOOTLOADER)
DOWNLOAD LINK :
M3D91 (July Update)
M3D62B (June Update)
M3D32 (May Update)
Original Thread: http://forum.turkdevs.com/showthread.php?tid=9767
RAR PASSWORD
FORUM.TURKDEVS.COM
INSTALLATION
While rom is installing, your everything in device is deleting. Thus you must backup your important data.
In order to install this rom, OEM (BOOTLOADER) must be unlocked and device drivers must be installed.
You can install device drivers with this tool.
The Folder in RAR extract anywhere on your computer that you downloaded from the link.
enter BOOTLOADER MODE. (close your device and hold the volume down and power key. When come "GENERAL MOBILE" , release buttons. This screen is BOOTLOADER SCREEN.
After you connect your device to your computer, run "INSTALL_M3D91" Folder.
choose your device part of install Stock Rom.
After INSTALLATION finished, Your device will be restarted.
After your device open, you choose option SETTINGS >> BACKUP & RESET >> FACTORY DATA RESET.
After your device restart, you can use your device bugless.
ScreenShots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

reserve

reserve2

RealSchule said:
[6.0.1][M3D32] GM 5 PLUS FASTBOOT STOCK ROM
General Mobile 5 PLUS
Android One 3rd Generation STOCK ROM
WARNING !
This ROM has been powered by forum.turkdevs.com
This software isn't shared without my permission.
Give proper credits and link to this post always.
About;
This tool is supporting English and Turkish languages.
You can install M3D32 Version Stock Rom your device. (GM 5 PLUS SINGLE SIM and DUAL SIM). And also you can open OEM (BOOTLOADER)
DOWNLOAD LINK : https://drive.google.com/file/d/0B065LdNGqJLGU0U2bFhwSlpod1E/view?pref=2&pli=1
Original Thread: http://forum.turkdevs.com/konu-6-0-1-m3d32-gm-5-plus-fastboot-stock-rom.html
RAR PASSWORD
FORUM.TURKDEVS.COM
INSTALLATION
While rom is installing, your everything in device is deleting. Thus you must backup your important data.
In order to install this rom, OEM (BOOTLOADER) must be unlocked and device drivers must be installed.
You can install device drivers with this tool.
The Folder in RAR extract anywhere on your computer that you downloaded from the link.
enter BOOTLOADER MODE. (close your device and hold the volume down and power key. When come "GENERAL MOBILE" , release buttons. This screen is BOOTLOADER SCREEN.
After you connect your device to your computer, run "INSTALL_M3D32" Folder.
choose your device part of install Stock Rom.
After INSTALLATION finished, Your device will be restarted.
After your device open, you choose option SETTINGS >> RESET >> FACTORY DATA RESET.
After your device restart, you can use your device bugless.
ScreenShots
Click to expand...
Click to collapse
why is system.img damaged. Its in sparse format when I am trying to convert to ext4 its failing due to its damaged
Written CR2 is not matched with Calculated CR2.

HostZero said:
why is system.img damaged. Its in sparse format when I am trying to convert to ext4 its failing due to its damaged
Written CR2 is not matched with Calculated CR2.
Click to expand...
Click to collapse
Hi, file system of gm 5 plus is squashfs, you can use simg2img for converting sparsed squashfs image to unsparsed squashfs image.

RealSchule said:
Hi, file system of gm 5 plus is squashfs, you can use simg2img for converting sparsed squashfs image to unsparsed squashfs image.
Click to expand...
Click to collapse
I have tried.
Its sparse
While converting. It converts to SquashFS.
Then Unpacking using the squash-tools doset work! So I have received a TWRP backup Anyways, Need to download that.

M3D62B(June update) version added.

M3D91(July update) version added.

I can't get the new update via OTA. What's the difference between this ROM and OTA version?

M3E26 update version Is it be added? please

Thanks

Hi!Need a help please,after i flashed a fastboot stock rom or twrp aroma stock rom i'm confronted a bootloop ??

Hi all!
i need link please, all of the 3 link is down!!
tanks in advance

Thanks

[GUIDE] Huawei Firmware Upgrades Manually from 8.1 to 9.1

This was done on the Huawei P20 Pro L29C636 variant.
My phone does have it's bootloader unlocked and has been previously rooted.
As stated on just about every other thread, I do not take responsibility for anything that happens to your phone. The method described below is what I experienced with my phone, with the various modifications I had made in the past, and using software other people have developed.
You assume all risk to your equipment.
OTA updates stopped on EMUI 8.0 so I had to find a solution to get the latest EMUI and security patches. Below is the list of software and instructions that I followed to complete these incremental updates. If you own a different regional variant (i.e. L29C432), you can still follow the same instructions, but pay attention to your build numbers when trying to upgrade past 8.1. When jumping from 8.1 to 9.0 and 9.0 to 9.1 you MUST upgrade to the firmware approved for your particular phone variant prior to the new EMUI update. There is a chance you will soft brick your phone, but as long as fastboot still works, you can recover.
Step 1:
Download these two files.
HiSuite_9.0.2.304.zip
hisuite.zip
Install the HiSuite application, do not upgrade the application, and close the program.
Copy the httpcomponent.dll file to C:\Program Files (x86)\HiSuite
Copy the HiSuiteConfig.xml to C:\Users\*username here*\AppData\Local\HiSuite\UserData\UpdateDogDev
Step 2:
Open your system host file at C:\Windows\System32\drivers\etc\hosts
Add these lines to the bottom of the file:
188.225.84.142 query.hicloud.com
Save the file... be sure it saves over the current file and not a new file with a file extension.
Step 3:
Open your Network Connections window in Control Panel here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Right click on your active Network Connection and go to Properties.
In the dialog box, click on Internet Protocol Version 4 and click the Properties button below the box.
In the dialog box, change your DNS Preferred to 188.225.84.142 and DNS Alternate to 1.2.3.4.
Click the box for Validate Settings Upon Exit just to make sure you do not have any network errors.
Step 4:
Download and open Firmware Finder on your phone here Firmware Finder
Open the program, check the top button is the model variant of your phone, and click the top button.
The list of firmware shown in this program will work for your phone. To be safe, select the firmware you want to upgrade to, and click Check Firmware Access then Check Availability to confirm it is approved for installation.
After you select the firmware you want to upgrade to, click on eRecovery for all versions and click through each prompt until you reach the prompt to Register Update. Click Register Update and this will register your IP address with this specific firmware. I do not know how long this stays registered for, but it will not expire for the time it takes to download and install the firmware.
Step 5:
Connect your phone to your PC with the proper cable, open HiSuite on your PC, and allow the application to install HiSuite on your phone.
Once HiSuite registers that your phone is connected click the Update button near the bottom of the screen.
A dialog box will pop up and recognize the new firmware you registered with Firmware Finder. Double check that the model and regional variant match your phone just in case you goofed up the selection.
This process does take some time since the firmware files can be upwards of 5GB. Be patient and do not interrupt the process. After it downloads, it will push the files to your phone (HiSuite calls is Installation), and then your phone will restart. After your phone restarts, you will get an EMUI update screen indicating that it is indeed updating your system. Once complete, the phone will restart, and you will have an shiny new upgraded phone.
I have read plenty of responses in other threads describing installation failures, stalled installations, or other negative outcomes. Here are a few tips:
RE: Soft Brick - Remember to factory reset/wipe data in eRecovery. This will not wipe your phone, but it will help you get back to some sort of recovery state whether it's eRecovery, TWRP, or back to the system.
RE: Failed Installations - Remember to check the firmware availability in Firmware Finder on your phone and not on the PC. This will avoid accidentally trying to install firmware meant for another variant.
RE: Stalled Installations - I prefer modifying the DNS settings on the computer that is connected to the phone using HiSuite. This avoids DNS settings that don't stick in router settings or a PC bypassing them altogether.
If you do soft brick, you can always HiSuite to recover and rollback the firmware on your phone. I also do have another technique in case HiSuite cannot recover your phone. Just to be clear that this other technique was only tested on the L29C636 variant, but it most likely will work on other global models.

Development [ROM][CUSTOM] - = 100% PURE EDITION = -

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Custom ROM based on stock firmware Android 11 - RETAIL_RRT31.Q1-84-24-1-2
Custom ROM version for Moto Edge S based on Global Stock firmware with added parts of Moto Edge S stock firmware RRN31.Q2-12-14-7 .
This custom ROM uses stock kernel without modification. The source for the stock kernel is not released by the OEM.​ Preliminary requirements:
- Only unlocked bootloader.
What's done:
- Removed the restriction on writing to the system, which in Android 11 is in Read Only (r/o) mode by default, which eliminates the possibility of modifying it. In this firmware it is possible to mount the system in Read Write (r/w) mode. Encryption is preserved in this case.
- System passes SafetyNet test, device is certified (in Magisk settings activate "Magisk Hide" function, in "Magisk Hide" tab give permission for Google Play Services, perform Google Play reset);
- Cleaned and lightened the system;
- Built in additional system color accents;
- Built in and updated to the latest versions at the time of firmware and Apps release . YouTube removed, because I use YouTube Vanced;
- Installed apps AdAway ad blocker, Command Center 2, File Manager, Gallery;
- Ringtones, notifications, alarms sounds have been replaced;
- Mod Logo and Bootanimation.
Installation:
1. Extract the system partition images from the archive (see the Download tab) and copy them to any convenient location on your PC.
2. Reboot the device into bootloader mode and:
- If you are installing the ROM for the first time or if you want to install the firmware with all data from the previous firmware removed, then use the _flash_custom.bat executable file;
- If you want to install the ROM as an update to its previous build, then use the _update_custom.bat executable file. Then all your data and applications will be saved and the system will be updated.
3. Phone will reboot into fastbootd mode and flash installation will start automatically. When the installation is completed the phone will automatically boot into the system.
6. When the boot is complete perform the initial settings.
7. Launch Magisk Manager application and update it. You are asked to setup workspace. Agree. The phone will automatically reboot after the setup is completed.
Notes
There is a hang-up when entering the connection settings of the NFC and Bluetooth settings. Don't worry about this. You just need to wait a little while.
There is no hang-up when you enable/disable NFC and Bluetooth via the icon from the Notification bar. This happens due to uninstalling any system applications.
Download
Moto_G100_PureEdition-24-1-2
Spoiler: Previous builds
Moto_G_100_Pure_Edition_2-01
Moto_Edge_S-100_PureEdition-12-14-7
Spoiler: Previous builds
Moto_Edge_S_100_Pure_Edition_2-01
Enjoy !

ilia3367 said:
View attachment 5356765
- =
Custom ROM based on Stock firmware
( Android 11 RETAIL_RRT31.Q1-84-24-1)​
Preliminary requirements:
- Unlocked bootloader.
- New and Clean Stock firmware is required!
What's done:
- Removed the restriction on writing to the system, which in Android 11 is in Read Only (r/o) mode by default, which eliminates the possibility of modifying it. In this firmware it is possible to mount the system in Read Write (r/w) mode. Encryption is preserved in this case.
- System passes SafetyNet test, device is certified (in Magisk settings activate "Magisk Hide" function, in "Magisk Hide" tab give permission for Google Play Services, perform Google Play reset);
- Cleaned and lightened the system;
- Built in additional system color accents;
- Built in and updated to the latest versions at the time of firmware and Apps release . YouTube removed, because I use YouTube Vanced;
- Installed apps AdAway ad blocker, Command Center 2, File Manager, Gallery;
- Ringtones, notifications, alarms sounds have been replaced;
- Mod Logo and Bootanimation.
Installation:
1. Extract the system partition images from the archive (see the Download tab) and copy them to any convenient location on your PC.
2. Reboot the device into bootloader mode and run the executive file flash_custom.bat.
3. Phone will reboot into fastbootd mode and flash installation will start automatically. When the installation is completed the phone will automatically boot into the system.
6. When the boot is complete perform the initial settings.
7. Launch Magisk Manager application and update it. You are asked to setup workspace. Agree. The phone will automatically reboot after the setup is completed.
Notes
There is a hang-up when entering the connection settings of the NFC and Bluetooth settings. Don't worry about this. You just need to wait a little while.
There is no hang-up when you enable/disable NFC and Bluetooth via the icon from the Notification bar. This happens due to uninstalling any system applications.
Download 100_Pure_Edition_1-02
Enjoy !
Click to expand...
Click to collapse
hi can it be installed having moto edge S 5g chinese version with chinese rom?

Точно не могу сказать, надо попробовать. Но китайцы продают свои телефоны для остального мира с уже установленной глобальной прошивкой. Так что теоретически это возможно. Дело не в полной прошивке. На модемную часть не влияет. Возможно потребуется установить модифицированный через Magisk boot.img из китайской прошивки.

Thanks for your efforts ! I will try it as soon as i can

Please write on which model you installed the ROM - Edge s or G100?

ilia3367 said:
Please write on which model you installed the ROM - Edge s or G100?
Click to expand...
Click to collapse
G100 model , installed successfully .

I appreciate the post, had no issues with installing. I did have an unrelated issue tho, that other noobs like me might wanna know about. I had an issue were some streaming apps and games from the play store said they were unsupported, which I thought Magisk or the firmware CDM was causing it. The issue was that I never turned on location and by activating it solved the problem.

I made a custom ROM version for Moto Edge S. Based on Global Stock firmware with parts of Moto Edge S stock firmware added (patched boot.img and vendor).
I would be glad if someone would write about his experience installing this ROM on Moto Edge S!

ilia3367 said:
I made a custom ROM version for Moto Edge S. Based on Global Stock firmware with parts of Moto Edge S stock firmware added (patched boot.img and vendor).
I would be glad if someone would write about his experience installing this ROM on Moto Edge S!
Click to expand...
Click to collapse
hello where is the rom? I have the edge S Chinese version, thank you
EDIT ah sorry you put it in the first post thanks

perfect installation I'm going to configure for mi moto edge S 5g versicon chinese In Spain with the google dialer we lose we do not have call recording, would it not be possible to bring the dialer of the Chinese version?
regards

Any plans to update this ROM with the recent images released from Moto?

hawki said:
Any plans to update this ROM with the recent images released from Moto?
Click to expand...
Click to collapse
What's the latest build now? I don't see any updates on https://mirrors.lolinet.com/firmware/moto/nio/ , nor on the Telegram channel.

Stock firmware update is out - RRTS31.Q1-84-24-1-2.
I will be releasing an update of my Custom ROM soon.

Updated the ROM for Moto G100 to a latest version based on Android 11(R) RRT31.Q1-84-24-1-2.

ilia3367 said:
Stock firmware update is out - RRTS31.Q1-84-24-1-2.
I will be releasing an update of my Custom ROM soon.
Click to expand...
Click to collapse
Hello very thanks for job

I updated Custom ROM for Chinese model Moto Edge S to Moto_Edge_S_100_Pure_Edition_2-01.
Please to those who installed this firmware write feedback about its work!

Updated Custom ROM for Moto G100 and Chinese model Moto Edge S!
It can now be installed as a full firmware and as an update to a previous build.

thanks make pure rom for china version

kenwu said:
thanks make pure rom for china version
Click to expand...
Click to collapse
I don't have a Chinese phone model and I don't have anything to test the firmware on.

ilia3367 said:
I don't have a Chinese phone model and I don't have anything to test the firmware on.
Click to expand...
Click to collapse
Hello, as I already mentioned, I have the Chinese version edge S, I was already testing the first version that you made for the moto g100 but the fingerprint did not go well, as I am in lineage, I should first flash the Chinese stock and then put the pure edition for me true version? Thanks a lot

[ROM][BETA][UNOFFICAL] LineageOS 18.1 for Xiaomi Qin F21s Pro By A.I.V

based on Andyyan LineageOS.
download (v1-alpha)
LineageOS 18.1 QinF21sPro alpha v1 by A.I.V.7z
drive.google.com
how to flash?
1. Unlock bootloader with mtkclient
2. Extract the 7zip file
3. Flash with SP Flash Tool
Important Note: You must to flash all the ROM. If consultance only super + userdata or any other part, it will not work. But, because it should flash all the ROM - but, it locks the bootloader ...
4. Re unlock bootloader with mtkclient
5. flash empaty vbmeta
Known Bugs:
1. Most of functions need to use with touch screen
(You can install qinpad to type with hardware keys)
2. System is read-only.
I packed the super.img as read-write, but it did not work
3. No access to partition / DATA by Twrp
4. Backlight always on the keys (thanks to gaugga from 4pda)
5. can't get files via Bluetooth It works. Sorry for the eror
6. can't use Bluetooth headphones
7. can't use headphones (to patch headphons
Phh settings > Misc > Use alternate way to detect headsets
and reboot. thanks to zerovoid and il.mikha98 from 4pda)
-----UPDATE V2-alpha------
changelog
1. you not need to re unlock bootloader after flashing
2. system as RW
3. A much better support in hardware keypad
4. add to system qinpad english-russian and qinpad english-hebrow and KeyboardSwticher app. (this apps is Open Source)
download
‏‏LineageOS V2.7z
drive.google.com
----update v3-BETA 1------
LineageOS 18.1 v3 (beta1) by A.I.V-patched.7z
7Z File
1drv.ms
LineageOS 18.1 for Qin F21 PRO by A.I.V
fix bugs in v3:
1. headset working
2. bluetooth headset working
known bugs:
1. Bluetooth and wifi work by default.
after flashing, you need to turn off them.(you can to turn on them after this)
2. backlight always on
3. no access to /DATA partition by Twrp
enjoy!
sorry on my bad english.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
note: i share FW for 64GB. if you have 32GB, you need to replace userdata and edit scatter.

to set QinPad as default keyboard, use this app
Keyboard Switcher 2.2.apk
drive.google.com

is F21s Pro diffrent from F21 Pro? can you make TWRP flashable?

EDIT: I resolved this error by simply check a guide for SP Flash Tools. The required file was MTK_AllInOne_DA.bin
Thank you for the guide.
I'm stuck at point 3, when I try to flash the phone with SP Flash Tools, I need to add the Download-Agent file in order to proceed. I used all the .bin files in the rom folder but none of them work.
Could you please advise?
Thanks

Hi,
I successfully flashed the phone with the firmware LOS18.1-QJIN-F21PRO as the one attached failed during the flash process. My phone is the 3/32GB version.
I have two problems:
1) I tried to lock the bootloader (for security reason) but the phone never starter. (I imagine that cannot be possible)
2) The keypad light is always on, is there a way to turn it off while the screen is off? Which application/setting is controlling this function? I might be able to help
Overall the system is pretty stable, my next step is to install the MicroG. Any advice on this?
Thank you

f21s Pro is F21 Pro. it is the same thing.
TWRP brought in 4PDA (Thankful to @ Hagai that brought it in Mitamchim top - the Israeli forum). flash it as boot_a.
twrp.img
drive.google.com
What is LOS18.1-QJIN-F21PRO? This LOS for 32GB from 4PDA? It is based on my ROM.
You can not lock bootloader After Flashing ROM
Light in the keys? It's a well-known bug (number 4)
I now work on repairs, for example better support in hardware keypad.
​

Update: I managed to flash and access TWRP, but not able to find the MicroG zip file saved in the phone.
Hi,
Yes, I took the LOS18.1-QJIN-F21PRO from the 4PDA forum (I don't speak Russian).
I will try to flash microG through TWRP (thank you for providing it)
How would I access the TWRP on the F21pro? Is it sufficient to boot the phone with volume down (#/camera button) pressed?
Many thanks

is volte working in this rom? thanks a lot.

update v2 - see orginal post

a9381 said:
update v2 - see orginal post
Click to expand...
Click to collapse
Thanks again for your excellent work!
I noticed that the phone boots with the Orange State warning (bootloader unlocked). Apart from this, I didn't notice any other problem

to patch haedphons
Phh settings > Misc > Use alternate way to detect headsets
and reboot. thanks to zerovoid and il.mikha98 from 4pda

very cool! tyvm, will keep this topic on my watch list!

To make a version with Gapps?

Thank you for this! Any plans to upload the source? Would like to build this myself.

a9381 said:
To make a version with Gapps?
Click to expand...
Click to collapse
Instead of Gapps, MicroG would be awesome and less invasive (and easy to implement).
Please keep Lineageos clean and in the worst-case scenario, the user will install MicroG or Gapps separately.

ok.
i fix the bluetooth headset problem...
in the next version, w.g.h.

Can anyone confirm volte is working on v2? Thanks a lot

update v3
OneDrive
onedrive.live.com
LineageOS 18.1 for Qin F21 PRO by A.I.V
fix bugs in v3:
1. headset working
2. bluetooth headset working
known bugs:
1. Bluetooth and wifi work by default.
after flashing, you need to turn off them.(you can to turn on them after this)
2. backlight always on
3. no access to /DATA partition by Twrp
enjoy!

update v3-BETA 1

a9381 said:
update v3
OneDrive
onedrive.live.com
LineageOS 18.1 for Qin F21 PRO by A.I.V
fix bugs in v3:
1. headset working
2. bluetooth headset working
known bugs:
1. Bluetooth and wifi work by default.
after flashing, you need to turn off them.(you can to turn on them after this)
2. backlight always on
3. no access to /DATA partition by Twrp
enjoy!
Click to expand...
Click to collapse
Thanks for your work. can you confirm VOLTE works on this rom? If not will it be fix? Congrats its now on BETA.

Doogee N20 - Some phones are just hard to modify

After finally unlocking the bootloader, installed TWRP 3.6.0 and rotted with Magisk v23.0. Lets find a custom ROM that suits this phone - WRONG!
I have tried many types of ROM and so far it ends in soft brick. Need advise if you have any. My aim is to install a basic custom ROM , install pico or nano GAPP, and only install like 4 apps on it. phone, sms, navigation, music player etc.
I have tried the following ROM:
Phhusson-treble AOSP andriod version 9, 11 & 12.
GSI arm64 ab ROM
a so call stock ROM
I also tried installing the vendor.img as described here
I would like to use LineageOS but there doesn't seem to be one for this phone
I am now resorting to installing the stock firmware to make the phone work again, instruction here
If anyone has sucessfully rooted this phone using a basic ROM and GAPP please share how you did it and where your download was.

Why did phhuson fail ? That's the basic gsi, every other gsi are build on top of that. If that doesn't work, nothing will.

Fytdyh said:
Why did phhuson fail ? That's the basic gsi, every other gsi are build on top of that. If that doesn't work, nothing will.
Click to expand...
Click to collapse
I install - system-arm64 –ab
I did some research that the Doogee n20 is a arm64 and a+b .... Unless I got the wrong information.
I suspect there maybe some stock firmware files that needs to be installed as well to make it work properly.
A post said it needs vendor.img, I might try sourcing another copy.
Follow up - I got it un-bricked with the stock firmware (android 9) (link in my original post) .... Back to square one .

jackjack1885 said:
I install - system-arm64 –ab
I did some research that the Doogee n20 is a arm64 and a+b .... Unless I got the wrong information.
I suspect there maybe some stock firmware files that needs to be installed as well to make it work properly.
A post said it needs vendor.img, I might try sourcing another copy.
Follow up - I got it un-bricked with the stock firmware (android 9) (link in my original post) .... Back to square one .
Click to expand...
Click to collapse
Search treble info, it will tell you exactly any treble related information.

Fytdyh said:
Search treble info, it will tell you exactly any treble related information.
Click to expand...
Click to collapse
Many thanks, didn't do that step.
Did it now, it shows it needs system-arm64-ab
I got the right one. Not sure about the VNDK 28.0 doesn't really say on the webpage.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tried android 9 (the phones original version) 11, and 12..... No luck.

follow advices from this https://forum.xda-developers.com/t/doogee-n20-twrp.4136331/
and this https://forum.xda-developers.com/t/...loop-after-any-custom-rom-doogee-n20.4357313/

Hey man, did you get it fixed?
Actually this device is A-only, but you should use Gsis A/B.
Most Phh based Gsi works almost perfectly for me.
You can try this:
- Download and install Twrp 3.6.1 here
- Download LineageOS 18.1 (lir) here Choose "arm64 bvZ" version
- Download stock rom here or Y9Plus variant here
- Extract the Gsi, and the vendor image from the stock rom
- I restarted in Twrp, go to wipe and select system, data, cache...
- Go install and flash the Gsi as system image, and vendor as vendor image
-reboot

AtS17 said:
Hey man, did you get it fixed?
Actually this device is A-only, but you should use Gsis A/B.
Most Phh based Gsi works almost perfectly for me.
You can try this:
- Download and install Twrp 3.6.1 here
- Download LineageOS 18.1 (lir) here Choose "arm64 bvZ" version
- Download stock rom here or Y9Plus variant here
- Extract the Gsi, and the vendor image from the stock rom
- I restarted in Twrp, go to wipe and select system, data, cache...
- Go install and flash the Gsi as system image, and vendor as vendor image
-reboot
Click to expand...
Click to collapse
Thanks for the links!
Are you able to add this old firmware please? https://cloud.mail.ru/public/mCzU/5PX4cKPfH
I can't download it, i found it on 4pda (Mod Action: Link removed)
I'm trying to delete the red "TEE key not write" message.