Hi everybody.
I’ve had this phone for 10 months now and it’s been great. Yesterday, when i was trying to make a call, it was telling me that i am too close to the screen. I understood that the proximity sensor was acting funny, but I didn’t had time to look into it, because it was not covered by anything and it was in good light. This morning it was a short white flash when I unlocked it or when I was turning the screen off. It worked great all day after that. Then this evening i was using the phone and all of the sudden the screen started to flash white, then it would turn off fast and back on all white. It did that for 4-5 times, then it went in the state you see in the clip below. At one tine, it turned on like nothing happened for 3-4 seconds.
If i plug the charger in, it reacts normal. It's making the charging sound and it vibrates. Seems to be alive in the background, even though it's not displaying anything.
Does it have anything to do with the proximity sensor? Is it the ribbon cable connecting the display to the motherboard faulty? Should i just order a new display assembly?
Interesting, the next day seems to behave a bit different. I had remote erased it, i didn't want any of my personal data to remain on it.
I have found out that if the brightness level is low, i takes a few seconds until it starts blinking. If the brightness is high, then it does that straight away.
Ok, i will post a follow up for anyone else having the same problem. Now i can see that the display is damaged on the top left corner, the pixels are staying lit up bright. Now i can use it on low brightness for longer periods of time without flickering.
I have ordered a replacement screen assembly and i'm still waiting for it, as i don't have the phone under warranty. Looking forward to getting it fixed.
I have also ordered a replacement screen and will replace it when the shipment arrived. Have you found a repair manual for the screen replacement?
I have already removed the back cover of my phone and it seems it will not be so difficult. But it would be better to follow a manual.
CrisGSM said:
Hi everybody.
Does it have anything to do with the proximity sensor? Is it the ribbon cable connecting the display to the motherboard faulty? Should i just order a new display assembly?
Click to expand...
Click to collapse
I read this post now, I've got this kinda of broblem a month ago, but this happened only when the phone temperature became hot, I mean over 40°C, after a factory reset everything became normal, I no longer got high temperature and this problem don't appear, so at least in my phone it wasn't a hardware problem.
https://u.pcloud.link/publink/show?code=XZlcytkZWeh5RbqPt7fWqlxP3mT0LSb7b3oy
Hey guys I had the exact same problem. I sent my phone back in for repair and this is what I got
We have completed the necessary evaluation and repairs. We have also updated your device to the most current software.
We are in the process of shipping your device back. Typically, you should receive your device within two to three business days.
Repair Info: Display Failure(LCD Crack) (Functional), Display Failure(LCD Screen Bla (Functional), Display Failure(Others) (Functional)
Tracking number: 3939 9990 3569
If you have any additional questions, please DO NOT respond to this email. You may call us at 1-877-817-1759.
My advice is if the phone is under warranty send it in. Seeing this makes me wonder if it's a widespread hardware issue
I have received the replacement display and i have done the repair myself. All is fine, the phone is working good now.
CrisGSM said:
I have received the replacement display and i have done the repair myself. All is fine, the phone is working good now.
Click to expand...
Click to collapse
How was the teardown ? I can't find any videos on it. The axon 7 was a pain for me because the aluminum case was a pain to take off around the corners and got damaged a bit. Hopefully removing the back of the axon 10 is a little easier . Thanks for any info
Related
Has anyone come across this before? I was watching a video on MX Player not too long ago, and it seems to have resulted in a permanent colourful static for the phone.
I can't really tell if it's doing anything, but when I go through the motions of resetting it or booting into bootloader, the screen does not change at all.
Interestingly the volume buttons are still working, and if I press the area of the screen where I think the buttons are (e.g., the back/home/programs buttons) I get the right vibrations. Which leads me to believe my screen is broken, and that it's a hardware fault. I'm hoping pretty hard this isn't the case, as my phone is only two months old and it was a replacement for a 6 month old Nexus 4 which had stopped charging.
Anyone come across this before? I'm hoping there's a kind of solution somewhere out there... To make matters worse I bought this phone via a parallel importer AND I'm currently overseas and won't be back till the end of January.
Sigh. Photo of screen is as attached - please forgive the terrible quality as I had to use my laptop webcam.
Thanks in advance, everyone!
jono_nz said:
Has anyone come across this before? I was watching a video on MX Player not too long ago, and it seems to have resulted in a permanent colourful static for the phone.
I can't really tell if it's doing anything, but when I go through the motions of resetting it or booting into bootloader, the screen does not change at all.
Interestingly the volume buttons are still working, and if I press the area of the screen where I think the buttons are (e.g., the back/home/programs buttons) I get the right vibrations. Which leads me to believe my screen is broken, and that it's a hardware fault. I'm hoping pretty hard this isn't the case, as my phone is only two months old and it was a replacement for a 6 month old Nexus 4 which had stopped charging.
Anyone come across this before? I'm hoping there's a kind of solution somewhere out there... To make matters worse I bought this phone via a parallel importer AND I'm currently overseas and won't be back till the end of January.
Sigh. Photo of screen is as attached - please forgive the terrible quality as I had to use my laptop webcam.
Thanks in advance, everyone!
Click to expand...
Click to collapse
Only time I've seen something like this was when my integrated graphics card on my desktop overheated, everything still worked, but colorful static everywhere. I'd let it cool down for a while, chances are it was pretty hot when it did that, and see if high temps might make it happen again.
I just had the same thing happen. Phone had been in my pocket and I had just taken it out to check the time maybe 10 minutes before it happened. The only difference with mine was I bumped into a table and hit the phone in my pocket. It does have a case on it and there is no sign of damage at all such as a cracked screen or anything. The static only lasts for a few seconds and thats right after I force it to reboot. After that it just goes to an all black screen. My LED indicator light is still flashing at me telling me I have an email though so I'm not sure what the deal is.
Were you able to resolve this issue? I too just experienced this issue as well and my phone is currently unusable. Thanks!
Do a full wipe as in wiping the entire phone and making it as if you just got it out of the box. if it persist RMA
Sent from my Nexus 5
Hi, I broke my screen (really bad smash) and had have this static on my new screen. The new screen was apparently fully tested. When using the slim port i can display on my TV and the digitizer works fine, its just this same colour static on the handset. I am now waiting for a replacement USB flex (it was a bit bent in the break) and i expect the new USB flex will fix it. If not then its a bad screen.
Will post the results when i get the parts
Fixed!
Hi,
My new USB flex arrived today. I installed it and found my screen is working perfectly.
The first pic is the same colour static that the op had.. Second one is the USB flex board / ribbon. Ebay for 20 Euro. Please remember that USA users are LG D820 and Europe/rest of works LG D821. I think its important for this part as the aerials connect here ans they are different in USA.
Good luck everyone
zeebo1111 said:
Hi,
My new USB flex arrived today. I installed it and found my screen is working perfectly.
The first pic is the same colour static that the op had.. Second one is the USB flex board / ribbon. Ebay for 20 Euro. Please remember that USA users are LG D820 and Europe/rest of works LG D821. I think its important for this part as the aerials connect here ans they are different in USA.
Good luck everyone
Click to expand...
Click to collapse
Hi,
sorry for reopen the topic but I really need to know if change de USB flex solve this problem
thanks
Static screen and freezing
Hi All,
Need help here with my 6 month old Nexus 5. It has been pretty good with no issues but since last evening, it started behaving weird. The chronological events are as follows
1. While browsing on Chrome some websites were not scrolling intermittently. This was only in the browser.
2. After about 10 mins of the above behavior the entire phone froze and didn't release itself. I had to force reboot by holding the power button down for about 10 secs. When the screen came on, it was the static screen
3. I again pressed the power button a couple of times but no use. Held it again for 10 secs, then phone rebooted and everything was fine.
4. Continued to use the phone and everything was normal until this afternoon, when the phone again froze while browsing a website
5. Since then the phone screen shows the static and if I press the power button once, the screen switches off and press again the screen comes on with the display showing properly. I can now only perform one touch which is registered and the screen freezes. If I switch off and on again the next screen / action is shown which is the action I did in the previous touch. Every time it registers one touch and I have to switch off and on again to see the next screen. Sometimes the phone just shows static and I have to wait a few seconds (30 sec) before using it again.
6. If I make a call to my phone, I hear one ring and then it is busy tone like I've cancelled the call. However the phone does not show the incoming call.
My phone has been intact and is well protected with screen guards and case. There is no physical misuse / abuse of the phone. I managed to shut down the phone and enter recovery. Here as well it only registered one touch, though the phone was processing and moving the next step. I somehow managed to initiate a factory reset through the settings, but no use.
Now in about 2-3 hrs the phone has become completely useless. I'm uncertain what the problem is, all my touch inputs are registered and processed. The screen just doesn't refresh to the next and requires a power off/on. I picked up this phone in the US and now in India. So I can't RMA the phone and I don't have warranty for this in India.
Any suggestion will be greatly appreciated.
Madzy said:
Hi All,
Need help here with my 6 month old Nexus 5. It has been pretty good with no issues but since last evening, it started behaving weird. The chronological events are as follows
1. While browsing on Chrome some websites were not scrolling intermittently. This was only in the browser.
2. After about 10 mins of the above behavior the entire phone froze and didn't release itself. I had to force reboot by holding the power button down for about 10 secs. When the screen came on, it was the static screen
3. I again pressed the power button a couple of times but no use. Held it again for 10 secs, then phone rebooted and everything was fine.
4. Continued to use the phone and everything was normal until this afternoon, when the phone again froze while browsing a website
5. Since then the phone screen shows the static and if I press the power button once, the screen switches off and press again the screen comes on with the display showing properly. I can now only perform one touch which is registered and the screen freezes. If I switch off and on again the next screen / action is shown which is the action I did in the previous touch. Every time it registers one touch and I have to switch off and on again to see the next screen. Sometimes the phone just shows static and I have to wait a few seconds (30 sec) before using it again.
6. If I make a call to my phone, I hear one ring and then it is busy tone like I've cancelled the call. However the phone does not show the incoming call.
My phone has been intact and is well protected with screen guards and case. There is no physical misuse / abuse of the phone. I managed to shut down the phone and enter recovery. Here as well it only registered one touch, though the phone was processing and moving the next step. I somehow managed to initiate a factory reset through the settings, but no use.
Now in about 2-3 hrs the phone has become completely useless. I'm uncertain what the problem is, all my touch inputs are registered and processed. The screen just doesn't refresh to the next and requires a power off/on. I picked up this phone in the US and now in India. So I can't RMA the phone and I don't have warranty for this in India.
Any suggestion will be greatly appreciated.
Click to expand...
Click to collapse
I'm getting the same issue. Tried soft and hard reset. Opened her up and seated all cables. The issue is still persisting. Is replacing the USB flex the way to go?
Hey I have a nexus 5 32GB and the screen started to do weird things and now it isn't working at all. Its the same in recovery mode also do I think that it's not a software problem.
I think there is an issue with the motherboard. Please help me out.
Thanks in advance.
nexus565 said:
Hey I have a nexus 5 32GB and the screen started to do weird things and now it isn't working at all. Its the same in recovery mode also do I think that it's not a software problem.
I think there is an issue with the motherboard. Please help me out.
Thanks in advance.
Click to expand...
Click to collapse
Most likely the flex cable
ふかつどう
Anyone seen this colored screen?. I have been getting this past 2 weeks when phone is charging and screen is about to turn off. I am on stock not rooted.
bullorbear said:
Anyone seen this colored screen?. I have been getting this past 2 weeks when phone is charging and screen is about to turn off. I am on stock not rooted.
Click to expand...
Click to collapse
Looks like the daydream function. You can turn it off in Settings>Display>Daydream
Sent from my Nexus 5 Unchained using XDA Free mobile app
Same thing, Screen now black. Won't turn on...
Hey everyone, I know that this is kind of late to the thread, but I have what I believe is the same problem as everybody else here. I had my Nexus 5 in my pocket for maybe five minutes, and in between the times that I put it in my pocket and took it out again to reply to a text, the screen went all colorful and static on me (Red tint, almost as if I had twilight on, but I didn't). I tapped the back, and the colors went back to normal, but the digitizer wasn't responding to touch. Then, It went black. No color, the speakers weren't working, neither was the backlight on the display. I took it apart, and figured its either the USB flex cable (which looked frayed), or the mainboard. If its the USB flex cable, then I know I can repair it. If it's the mainboard... well, as a sixteen year-old who has no current source of income, I'm out of a $400 phone.
Pictures attatched. Thanks!
rikudo said:
I'm getting the same issue. Tried soft and hard reset. Opened her up and seated all cables. The issue is still persisting. Is replacing the USB flex the way to go?
Click to expand...
Click to collapse
I took the phone the LG service center and the technician seemed to know this issue and immediately said that the USB flex cable needs to be changed. The entire fix took about 5 mins and the phone is working fine since then.
Sorry for the delayed response.
I hate to necro up this thread but I'm having similar problems to the op with my nexus 5. About two weeks ago I saw my screen get grainy just like the op and many others mentioned and then the screen went completely black. The screen still "turns on" but it's just black with the backlight on. I can hear notifications and other things and I'm hoping that all I need to replace is just the flex cable. If it's a problem with the logic board then I'm screwed basically.
Anyway that's my story. Bought the flex cable and it'll be here by tuesday so I'll find out then if I'm lucky or not. Fingers crossed.
pezkiln said:
I hate to necro up this thread but I'm having similar problems to the op with my nexus 5. About two weeks ago I saw my screen get grainy just like the op and many others mentioned and then the screen went completely black. The screen still "turns on" but it's just black with the backlight on. I can hear notifications and other things and I'm hoping that all I need to replace is just the flex cable. If it's a problem with the logic board then I'm screwed basically.
Anyway that's my story. Bought the flex cable and it'll be here by tuesday so I'll find out then if I'm lucky or not. Fingers crossed.
Click to expand...
Click to collapse
Hey man, did you ever try this out and get it to work? I have the same problem and was thinking of trying this out but wanted confirmation first.
Thanks!
Just wanted to post here to say that this thread just saved me a lot of money!
Had the same issue (static showing on the screen). Local phone repair shop told me it needed a new screen, without even looking at it(!), and it would be £120 + labour. Told them I would think about it, and came home and did some more research, found this thread. Ordered a replacement USB flex cable from eBay, and fit it by following a YouTube tutorial, and now the phone is back working fine. brilliant!
Thanks xda!
I had a problem where my screen looked like an old CRT TV with particles flashing all over on anything with a static dark background. Any ideas
I gave my Z3 a little bath in tap water in the sink. It was not submerged so this is more like a shower. I double checked and secure the ports. I don't even use the ports anyway because I have magnetic charging. I dried it and started using it. It was all fine until 5 mins later it just randomly turned off. Battery was good, tried using the power button and it wouldn't work. So I did the power button and volume + method and it fixed it. But the touch screen didn't work sometimes (randomly), there was a blinking red light before I booted it on, and there is rattling near the camera area when i shake it. I ran diagnostics and noticed that my screen was also flickering. Some of the tests used vibration as feedback and this made the flickering worse. Now the screen is struggling to stay lit. It turns on for 3 seconds and then it dies. You can only see parts of it too. I need help. This phone is unusable. I bought this phone (Sony Xperia Z3 D6603 black) from Worldwide Distributors on Amazon.com 3 months ago. I only took it into the water a few times. I don't think its water damage because I had the flaps secured unless Sony gave me a defective phone. I paid $700 for this and I'm not rich either. I was saving up. The phone has the standard 2 year warranty. Somebody please help. what should I do? Will Sony fix it or give me a new one?
UPDATE: Screen is dead. It still turns on and touch screen still works but cant see anything. It's like it lost signal . Kinda like how a tv loses signal. The tv still works but are no shows on.
IMPORTANT: I just found a little hole that shows part of the screen backlight. Its on the side but its more like a crack. I haven't drop this or anything. So this is possibly how the water got in. This is also Sony's fault. Will I get a new replacement or refund or repair or something?
Thanks for all your help.
afghanpure said:
I gave my Z3 a little bath in tap water in the sink. It was not submerged so this is more like a shower. I double checked and secure the ports. I don't even use the ports anyway because I have magnetic charging. I dried it and started using it. It was all fine until 5 mins later it just randomly turned off. Battery was good, tried using the power button and it wouldn't work. So I did the power button and volume + method and it fixed it. But the touch screen didn't work sometimes (randomly), there was a blinking red light before I booted it on, and there is rattling near the camera area when i shake it. I ran diagnostics and noticed that my screen was also flickering. Some of the tests used vibration as feedback and this made the flickering worse. Now the screen is struggling to stay lit. It turns on for 3 seconds and then it dies. You can only see parts of it too. I need help. This phone is unusable. I bought this phone (Sony Xperia Z3 D6603 black) from Worldwide Distributors on Amazon.com 3 months ago. I only took it into the water a few times. I don't think its water damage because I had the flaps secured unless Sony gave me a defective phone. I paid $700 for this and I'm not rich either. I was saving up. The phone has the standard 2 year warranty. Somebody please help. what should I do? Will Sony fix it or give me a new one?
UPDATE: Screen is dead. It still turns on and touch screen still works but cant see anything. It's like it lost signal . Kinda like how a tv loses signal. The tv still works but are no shows on.
IMPORTANT: I just found a little hole that shows part of the screen backlight. Its on the side but its more like a crack. I haven't drop this or anything. So this is possibly how the water got in. This is also Sony's fault. Will I get a new replacement or refund or repair or something?
Thanks for all your help.
Click to expand...
Click to collapse
Happened to me too! The screen is black but is showing the brightness and the touch works. It's totally weird!. i'm going to send the phone to SAT
Seems the lcd backlight is still working where the lcd screen is not;
not sure whether the warranty covers water damage or not...
Got around the same problem. happend in the water screen went black phone was still working. After a lot of reboots and resets it started to work for around 3 seconds then evantually the screen was staying, but is flashing now, looks like the flickering happens when the screen gets too much power. In light conditions it either flickers or is real dark.
What can I do to fix this? Or do I just contact Sony? I've also tried the pressure test and it is water resistant so it has to be something different.
If the screen is cracked they will charge you for the replacement for sure
Inviato dal mio D6603 utilizzando Tapatalk
Hi. I've noticed that my screen flickers when I put the brightness on maximum. Watching the behavior it makes me think that it happens all the time, but it's only noticeable the screen brightness is high. Tried to get it on film, but my camera does not seem to pick up the flickering.
I noticed this after a pool bath with my phone, but i don't know if it is related to that. I did not a chance to use maximum brightness before
I do not have any other issues though, just the flickering. Should i send it to repair? My phone is an 6633 Dual Sim Z3 (Brazilian, unbranded) with less then 3 months of usage.
Hi all
I have had my nexus 5 for a while now and just as i was flying overseas some strange things happened.
First the vibration stopped working which i knew was a loose connection on the back of the phone. Holding that area down would get it working again. Then the touch display stopped working. The LCD worked but could not touch anything to unlock the phone. I disassembled the phone and assembled it again and strangely it worked again although i didnt see anything obvious. Then is happened again...
I disassembled the phone and played around with it for a while and noticed if pressed down on the connection where the flex cable connects to the motherboard it would work again. but when i would release the pressure it would be funny again. I did this a number of times until eventually the whole LCD/blacklight should shut off. Now i can rarely get it to display anything. The phone is working because the LED light would flash and i can hear the messaged coming through. I just cannot see anything.
I replaced the flex cable with a new one and still the same issue. I replaced the LCD + digitizer + frame and still the same issue. I guess its the motherboard. Can i fix this ??
Now for some more issues:
I bought a broken Nexus 5 while overseas and i swapped the motherboard out and everything works! So it as definitely the motherboard. However, the second motherboard is having issued the the battery. I have every indication the battery is charging. However the battery percentages is stuck on 40%. It would flicker around 39% 40% instantly and when looking at the battery graph on the phone it is noisy, it is not a constant line. The percentage is not a true indication of the battery charge. I cannot get the phone to turn on just by the battery itself no matter how long i charge it for. I have swapped batteries out and i still get the same issue. I have swapped flex cables and still the same issue. Could it be that the second motherboard is also damaged??
I used the amphere app for a while while i had some power and it shows 100mA while charging but a voltage of 0V! When I unplug the cable it will shutoff. Sometimes i cannot even boot it up while charging.
Amphere showing 1%
h**ps://drive.google.com/open?id=0B9KF5ld-Rlu_VWY2eHA5VXE4R3M
What is wrong with these two motherboards?! I do not see anything obvious on the board itself.
I now see the new Nexus 5X is out but i am hesitant in buying it...This is the first phone i have had major issues with.
PS, i gave the latest updated
Thanks for your help guys. I will provide whatever information i can.
It sounds like your 1st phone is having the same problem I have with mine, which is described here: http://forum.xda-developers.com/google-nexus-5/help/main-board-socket-flex-cable-super-t3217281
Use a magnifying glass to see if any pins on the socket are broken. I still don't know if it's fixable.
ourandroid said:
It sounds like your 1st phone is having the same problem I have with mine, which is described here: http://forum.xda-developers.com/google-nexus-5/help/main-board-socket-flex-cable-super-t3217281
Use a magnifying glass to see if any pins on the socket are broken. I still don't know if it's fixable.
Click to expand...
Click to collapse
thanks for that. I believe this is the same problem also.
Although i cannot find any abnormal pins...
Macro shots of suspect connection:
https://drive.google.com/folderview?id=0B9KF5ld-Rlu_S2hwUDhlQUJlN2c&usp=sharing
Hello guys,
I got a problem on my Google Pixel out of nowhere. I turned it off a few days ago and when trying to turn it on again a few hours later it did not work.
Nothing happened whether it was plugged it or not so I thought the battery was faulty.
I ordered a new one and changed the battery. Now the phone turns on but the screen remains black (I can tell it's turning on because it vibrates).
The screen is black but is still responsive, I can still (with difficulty since I don't see anything) enter my pin code and then answer calls, receive messages and so on.
It is also worth mentionning that it seems to work the same with the old battery which I thought was faulty (I am 100% sure it wasn't vibrating before I changed it the fist time because I tried for two days before ordering the new battery).
Do you think replacing the screen would be enough or could it be another issue ?
Thanks for your help.
Kargrim said:
Hello guys,
I got a problem on my Google Pixel out of nowhere. I turned it off a few days ago and when trying to turn it on again a few hours later it did not work.
Nothing happened whether it was plugged it or not so I thought the battery was faulty.
I ordered a new one and changed the battery. Now the phone turns on but the screen remains black (I can tell it's turning on because it vibrates).
The screen is black but is still responsive, I can still (with difficulty since I don't see anything) enter my pin code and then answer calls, receive messages and so on.
It is also worth mentionning that it seems to work the same with the old battery which I thought was faulty (I am 100% sure it wasn't vibrating before I changed it the fist time because I tried for two days before ordering the new battery).
Do you think replacing the screen would be enough or could it be another issue ?
Thanks for your help.
Click to expand...
Click to collapse
Have you dropped the phone? not like the ribbon cable connecting the screen to the motherboard could be loose and needs to be reattached again? just a guess though..
Arju said:
Have you dropped the phone? not like the ribbon cable connecting the screen to the motherboard could be loose and needs to be reattached again? just a guess though..
Click to expand...
Click to collapse
Hello Arju,
No I didn't drop it.
Since I had to take off the screen to change the battery I had to unplug the ribbon cable. When putting everything back together I tried many times to unplug/replug it without success so far. (I did not glue it back yet to the case so far so I still have access).
Moreover, since the touch screen is working I am guessing it has to be attached correctly.
Thanks for your idea anyways.
Hi All
Has anyone had any issues with a black screen?
Everything else works like incoming calls and notifications but the screen it totally black!
Woke up early hours last night and noticed no AOD so tried to turn my phone on but the screen was just dead. Tried the volume and power button but still no joy
Power it down completely then plug in the charger.
If nothing shows on the screen it sounds like you lost some significant hardware... maybe just a connector.
toddyc said:
Hi All
Has anyone had any issues with a black screen?
Everything else works like incoming calls and notifications but the screen it totally black!
Woke up early hours last night and noticed no AOD so tried to turn my phone on but the screen was just dead. Tried the volume and power button but still no joy
Click to expand...
Click to collapse
Same happened to my SM-N9860 unit when I woke up today. I about to unlock and the display suddenly went black screen. Did everything but no luck. I am also sure it's the display that's f***d up. The phone is still working - I can still access it in Dex and Link to Windows. This is my second Samsung phone with f**d up display for unknown reason. This is crap Samsung. Not expecting for this from an expensive flagship smartphone. I swear this is the last.
toddyc said:
Hi All
Has anyone had any issues with a black screen?
Everything else works like incoming calls and notifications but the screen it totally black!
Woke up early hours last night and noticed no AOD so tried to turn my phone on but the screen was just dead. Tried the volume and power button but still no joy
Click to expand...
Click to collapse
By the way, how did you fix your phone?
I tried searching it on the net, seems a number of Note 20 ultra units are experiencing the same.
https://us.community.samsung.com/t5/Note20/Note-20-Ultra-Black-Screen-Phone-no-display/td-p/1437825
Seems that display replacement is the only fix.
tribalfs said:
By the way, how did you fix your phone?
I tried searching it on the net, seems a number of Note 20 ultra units are experiencing the same.
https://us.community.samsung.com/t5/Note20/Note-20-Ultra-Black-Screen-Phone-no-display/td-p/1437825
Seems that display replacement is the only fix.
Click to expand...
Click to collapse
Poor parts QC.
Samsung will substitute components and smaller chipsets in the middle of a production run. This can lead to unpredictable behavior especially after firmware updates... or outright failures like this.
Not reassuring especially with a flagship phone.
blackhawk said:
Poor parts QC.
Samsung will substitute components and smaller chipsets in the middle of a production run. This can lead to unpredictable behavior especially after firmware updates... or outright failures like this.
Not reassuring especially with a flagship phone.
Click to expand...
Click to collapse
Yeah. Very disappointing.
I can't believe it but my screen unexpectedly revives itself after a day.
tribalfs said:
I can't believe it but my screen unexpectedly revives itself after a day.
Click to expand...
Click to collapse
Time will tell. Intermittents are the hardest hardware failures to troubleshoot...
blackhawk said:
Time will tell. Intermittents are the hardest hardware failures to troubleshoot...
Click to expand...
Click to collapse
Agree. But I am happy that it's working fine now and I hope it will not recur.
tribalfs said:
I can't believe it but my screen unexpectedly revives itself after a day.
Click to expand...
Click to collapse
hi im facing exact same thing in my N986 B Galaxy Note 20 Ultra. I had 10 percent battery left. i had put phone on charge and saw after 20 minutes and tghe screen was black.
Now its blackscreen can connect with tv via hdmi dex mode
but phone restarts after 10 minutes.
the touch seems fine as mouse function works phone is on but no display
can you tell exactly what you did when your phone revieved after one day
did u keep it on. charge all tiime tried reset or removed charging
or nothing and tried after 1 day
Edit After 24 hours of tapping slappingrebooting installing stock firmware. my display came back alive.
last thing was i was using phone in dex mode and trying to open close camera app rapidly by direct touch on screen. i dont know what worked but it saved my 300 dollars of screen replacement
I have exactly the same issue.
I was typing on whatsapp when suddenly screen get black. It was on friday morning. Notifications were ok, voice commands too. Touchscreen ok, I could use it normally when using my TV as screen with HDMI cable or with my notebook, when connected to windows or even Dex.
One day earlier I had an issue with the new magisk update. I freeze magisk manager wich was force closing but later, I managed to reinstall with dex and was working fine. Not sure if it's related.
I already flashed fresh stock Android R rom, wich I thought would solve any issues related to magisk or any other software issue.
24h after flash stock rom and keep force rebooting and taping, and my display is still dead.
Tried to tap, slap, shake (I can her some noise next to camera module when shaking, is it normal? I took off S-pen and microsd tray to see if it was the cause, but the noise still persists). No damage, water, or anything else. Only 2 months of use.
Display is still dead.
I'm draining battery now with some apps that also vibrate phone, to see what happens when full drained.
I live in Manaus/Brazil and repair centers are not working until March 23 because of Sars-CoV2. And my knox is tripped. It would cost a lot If I have to replace display or even the phone, since they probably will say it's no longer covered by warranty.
Any tips are welcome.
Thanks in advance.
Hope I have that lucky as well.
It happened to me again today. Surprisingly, a strong knock at center of the screen revived it again.
tribalfs said:
It happened to me again today. Surprisingly, a strong knock at center of the screen revives it again.
Click to expand...
Click to collapse
Hardware failure. May be a loose connection, cracked solder joint, trace failure on the mobo, or a bad component.
Intermittents are the hardest problems to find...
blackhawk said:
Hardware failure. May be a loose connection, cracked solder joint, trace failure on the mobo, or a bad component.
Intermittents are the hardest problems to find...
Click to expand...
Click to collapse
Yes, obviously. Samsung already replacing displays of those who are having this issue.
tribalfs said:
Yes, obviously. Samsung already replacing displays of those who are having this issue.
Click to expand...
Click to collapse
Not good if there's a recall... crap QC is getting to be a bad Samsung habit.
Those of you with BSOD issues: Did you have intermittent wifi connectivity issues as well? My N20U had the 'connected to wifi AP but no internet' for the last month. Then today after unplugging the OEM charger, checking charge level, never picking the phone up from the desk, and returning to it 30 minutes later the BSOD had hit. No amount of hard restarts or waiting fixed it and it had to get shipped back. Just wondering if there is any correlation between the wifi issue and the screen going out, and if people should start sending their note in ASAP if the wifi problem occurs before the screen goes?
hello
i had the same problem (didn't have any Wifi issues before)
and after the screen went black for 2 day , it came back and worked for a few hours.. then went off again and Never came back
i tried everything, resets , cables , connecting to Dex or Hdmi , updating.. but Never worked
i went to Samsung and they said screen must be replaced ( will pay for it as i am out of warranty)
can you tell me what have you done or if anything worked for you?
My screen went black after a screen replacement. Only the front glass was broken not the digitizer or actual screen. From what I can tell it's not just the screen that's dead, it's the digitizer too. The S-Pen board underneath it all isn't even registering. When I plug it in the computer doesn't see it so Dex won't connect and there is no signal for HDMI to work. Had the USB port replaced just to be sure it wasn't a bad port.
It's like some one took the graphics card out of a computer and took the touch screen monitor. The phone still gets signal. It connected to my smart Fossil watch and I could answer calls and texts.
But the phone is 9 months old. And from what I've heard from parts distributors it's not the screen that's the issue. So now I have a new motherboard. Now I have to figure out how to program it....