Database Info

Miui 11 9.10.11 *solved*

So xiaomi.eu released a miui 11 android 10 build. I was able to root using magisk 19.5 canary (updated to 20.1 canary now) but have not found a version of edxposed that will boot. Tried multiple versions and always boots to fastboot mode. Oh I am also running the mipa custom kernel.
Anyone know of an edxposed build that will boot?

So I have found the solution. Install riru 19.5 and edxposed v0.4.5.5.beta(4470)(YAHFA) through magisk manager. Then use a root file manager go to /data/adb/modules/riru_edexposed and rename/delete post-fs-data.sh. Also need to disable selinux or flash a kernel with it disabled (MiPa kernel is what I used). Now reboot and you should have edxposed working.

[Solved for now] Unable to install Edxposed

I just upgraded to Oxygen OS 10.0.1.GM57AA from 9.5.8 (if I remember rightly, from India ).
I tried the following with Magisk 19.3 and 20:
1. No other Magisk modules only Riru Core - no problems.
2. Install Riru latest Ed xposed YAHFA. Device didn't get booted. Booted into TWRP side loaded Magisk Manager, set to core only mode Magisk and rebooted into system and uninstall YAHFA.
3. Tried step 2 with latest Sandhook. Same result
4. Uninstalled all Magisk modules and From EdXposed manager installed Riru core. No problem. Installing YAHFA or Sandhook from Manager, same result - device doesn't boot and spinning dots continue
Has anybody got it working? I searched the forum and elsewhere but couldn't find anything related to our device.
Please explain how you did it
Edit 1
1. Flashing Riru Core and Riru YAHFA/ Sandhook from TWRP (this worked for One Plus 7 Pro) didn't help. Same story of stuck at boot animation.
2. Flashing YAHFA from GravityBox for 10 also had the same problem.
3.. Flashing Canary version of YAHFA (v0.4.5.5_beta(4470) worked and I am able to use Xposed modules ! I don't know how stable this would be but at least I have got the modules I need like XPrivacy Lua installed and working. I didn't try Sandhook because I always found YAHFA to be stabler though slower.
Edit2
Canary version above created drag and gravitybox had a lot of issues. Credit to @C3C076 who pointed out to use YAHFA modified from here https://forum.xda-developers.com/showpost.php?p=80392829&postcount=30 and use the installer 2.2.4 from here https://github.com/solohsu/XposedInstaller/releases/tag/Ed_v2.2.4.
ALL fine
Please update what method you used and which modules used to help others . Thanks

Package Installer not function properly - Android 10

I just updated to android 10 on my oneplus 6 via local storage. Then fastboot installed twrp, flashed stock boot img, flashed twrp installer zip, rebooted to twrp & then installed magisk 20.1 including riru v15 & edxposed by justin (sandhook) for android Q.
The problem I am facing is that I am not able to install apks as whenever I manually try to install an apk, it says 'Sorry, no application available'
Please help out!

Apologies for bumping the thread but can someone help me out with the package installer details?
The path it is stored in the /system/ directory and share the apk? If I somehow could replace it as a system application and make it run?

Hello there, I'm facing the same problem with Android 10 and LineageOS 17.1.
I can install apk's via F-Droid and Aurora Store, I would assume Play Store works too, but I currently don't have it.
When I download an apk with a browser and I click on the notification in the notification drawer, it works and installs the app.
But when I try to open the finished download via the downloader manager, it does not work. The error is the same as posted by the OP (Sorry, no application available)
I also can not open apk's from non-default file explorers (Root Explorer, ES File Explorer) which gives the same error, but opening from built-in Files (com.android.documentsui) works.
The Package Manager is correctly located in
Code:
/system/priv-app/PackageInstaller/PackageInstaller.apk
I've tried the suggestions from a very old thread here on XDA:
- Delete Cache and Data for Package Manager
- Reset all app preferences
- Reboot to TWRP and clean Dalvik/Cache
- Disable all apps that can draw over other apps
But that didn't fix it unfortunately. Any ideas would be welcome.
Redmi Note 8 Pro, unlocked bootloader, recommended vendor
Android 10, LineageOS 17.1-20200330-UNOFFICIAL-hyper-begonia
Kernel 4.14.158+
NoGapps, microG
Magisk Modules:
- Bromite
- Magisk Manager for Recovery Mode (mm)
- NanoDroid (microG sub-module)
- Riru - Core
- Riru - EdXposed
- Smali Patcher
- Systemless Hosts
Xposed Modules:
- AFWall+
- EdXposeed Manager
- XposedGMSCoreUnifiedNlp
- Amplify (disabled)
- FakeMyGPS (disabled)
- GravityBox (disabled)
- XPrivacyLua (disabled)

[Guide] How to get EdXposed installed on Pixel 3XL running Android 10

Hi, guys I just wanted to post a guide on how to set up EdXposed on your Pixel 3XL. I have tried using many different setups with riru core, Edxposed, Edxposed Manager app and Edxposed Installer and I have finally found one that is very stable and allows for most of the Xposed modules to work (at least the ones I have tried).
[Last Updated 19/2/2020]
Device: Pixel 3XL
Magisk version : v20.3 Stable
Magisk Manager v7.5.1
Riru Core: v19.7 (Can be downloaded from here)
EdXposed: SandHook-v0.4.6.1 (4497)-release (Can be downloaded from here)
EdXposed Manager: v4.5.4 (Can be downloaded from here)
Instructions:
1. Install Riru Core in Magisk>Modules and then reboot
2. Install the EdXposed Manager app (Do not reboot!)
3. Install the EdXposed module in Magisk>Modules and then reboot
4. Verify Xposed is active by running the EdXposed manager
[Last Updated 19/2/2020]
Verified Xposed modules that are working
GravityBox 10 beta 6
MinMinGuard v2.0.9
Instaprefs v1.2.0
XPrivacyLua v1.27
XposedAlwaysCorrect 1.0.5
XposedSmsCode 2.2.2
Known Issues when using other versions of riru core, edxposed and edxposed manager:
MinMinGuard latest version 2.1.1 causes system bootloop
You guys can try this setup and if you are able to find no issues running updated version of Riru Core and Magisk Manager then please let me know. Respectively if you are able to find any supported/unsupported modules for the pixel 3XL please post the module link, version (and any errors) you are using so I can add it to the list.
Credits to this guy and the thread
Thanks for reading!

On the standard P3:
Device: Pixel 3
Magisk version : Debug ce7cb1ee (20306)
Magisk Manager: Debug ce7cb1ee (276)
Riru Core: v19.7 (Magisk Module Repo)
EdXposed: v0.4.6.1 (4492)-jowfjvqw (YAHFA) by solohsu, MlgmXyysd & rk700
EdXposed Manager: v4.5.2
Modules:
GravityBox 10 beta 6
Fingerprint pay 3.9.5
WeXposed 2.10
XposedSmsCode 2.2.2
Secure Settings 1.3.6u2

wangdaning said:
On the standard P3:
Device: Pixel 3
Magisk version : Debug ce7cb1ee (20306)
Magisk Manager: Debug ce7cb1ee (276)
Riru Core: v19.7 (Magisk Module Repo)
EdXposed: v0.4.6.1 (4492)-jowfjvqw (YAHFA) by solohsu, MlgmXyysd & rk700
EdXposed Manager: v4.5.2
Modules:
GravityBox 10 beta 6
Fingerprint pay 3.9.5
WeXposed 2.10
XposedSmsCode 2.2.2
Secure Settings 1.3.6u2
Click to expand...
Click to collapse
Hi, I was wondering if you had the repo or xda forum links to Fingerprint pay, WeXposed and Secure Settings? I cant seem to find them. Thanks.

First two can be found by googling (or in xda labs app), but cannot locate the secure settings one. Oh, secure settings module installs through the app which is available on google play.

Your instructions for getting EdExposed working on my Pixel 3 XL with HavocOS worked great... thanks!

[Fixed/Magisk] safety net Issue

Installing Xposed and passing the SafetyNet check
positive SafetyNet (MagiskHide Props Configs module is not needed), working Google Pay, working Google Play Market and all banking applications.
1. Install modules in Magisk Manager from the "Repository" section:
* Riru - Core (reboot)
* Riru - EdXposed YAHFA (reboot)
2. Install EdXposed Manager:
https://github.com/Eld...XposedManager/releases
3. Install modules through the program EdXposed Manager. We go to the "Search for Modules" section:
* HiddenCore Module - passes SafetyNet check and hides root
4. Make sure that all installed modules are enabled, reboot and check the SafetyNet status in Magisk Manager.