[Guide] How to get EdXposed installed on Pixel 3XL running Android 10 - Google Pixel 3 XL Guides, News, & Discussion

Hi, guys I just wanted to post a guide on how to set up EdXposed on your Pixel 3XL. I have tried using many different setups with riru core, Edxposed, Edxposed Manager app and Edxposed Installer and I have finally found one that is very stable and allows for most of the Xposed modules to work (at least the ones I have tried).
[Last Updated 19/2/2020]
Device: Pixel 3XL
Magisk version : v20.3 Stable
Magisk Manager v7.5.1
Riru Core: v19.7 (Can be downloaded from here)
EdXposed: SandHook-v0.4.6.1 (4497)-release (Can be downloaded from here)
EdXposed Manager: v4.5.4 (Can be downloaded from here)
Instructions:
1. Install Riru Core in Magisk>Modules and then reboot
2. Install the EdXposed Manager app (Do not reboot!)
3. Install the EdXposed module in Magisk>Modules and then reboot
4. Verify Xposed is active by running the EdXposed manager
[Last Updated 19/2/2020]
Verified Xposed modules that are working
GravityBox 10 beta 6
MinMinGuard v2.0.9
Instaprefs v1.2.0
XPrivacyLua v1.27
XposedAlwaysCorrect 1.0.5
XposedSmsCode 2.2.2
Known Issues when using other versions of riru core, edxposed and edxposed manager:
MinMinGuard latest version 2.1.1 causes system bootloop
You guys can try this setup and if you are able to find no issues running updated version of Riru Core and Magisk Manager then please let me know. Respectively if you are able to find any supported/unsupported modules for the pixel 3XL please post the module link, version (and any errors) you are using so I can add it to the list.
Credits to this guy and the thread
Thanks for reading!

On the standard P3:
Device: Pixel 3
Magisk version : Debug ce7cb1ee (20306)
Magisk Manager: Debug ce7cb1ee (276)
Riru Core: v19.7 (Magisk Module Repo)
EdXposed: v0.4.6.1 (4492)-jowfjvqw (YAHFA) by solohsu, MlgmXyysd & rk700
EdXposed Manager: v4.5.2
Modules:
GravityBox 10 beta 6
Fingerprint pay 3.9.5
WeXposed 2.10
XposedSmsCode 2.2.2
Secure Settings 1.3.6u2

wangdaning said:
On the standard P3:
Device: Pixel 3
Magisk version : Debug ce7cb1ee (20306)
Magisk Manager: Debug ce7cb1ee (276)
Riru Core: v19.7 (Magisk Module Repo)
EdXposed: v0.4.6.1 (4492)-jowfjvqw (YAHFA) by solohsu, MlgmXyysd & rk700
EdXposed Manager: v4.5.2
Modules:
GravityBox 10 beta 6
Fingerprint pay 3.9.5
WeXposed 2.10
XposedSmsCode 2.2.2
Secure Settings 1.3.6u2
Click to expand...
Click to collapse
Hi, I was wondering if you had the repo or xda forum links to Fingerprint pay, WeXposed and Secure Settings? I cant seem to find them. Thanks.

First two can be found by googling (or in xda labs app), but cannot locate the secure settings one. Oh, secure settings module installs through the app which is available on google play.

Your instructions for getting EdExposed working on my Pixel 3 XL with HavocOS worked great... thanks!

Related

Miui 11 9.10.11 *solved*

So xiaomi.eu released a miui 11 android 10 build. I was able to root using magisk 19.5 canary (updated to 20.1 canary now) but have not found a version of edxposed that will boot. Tried multiple versions and always boots to fastboot mode. Oh I am also running the mipa custom kernel.
Anyone know of an edxposed build that will boot?
So I have found the solution. Install riru 19.5 and edxposed v0.4.5.5.beta(4470)(YAHFA) through magisk manager. Then use a root file manager go to /data/adb/modules/riru_edexposed and rename/delete post-fs-data.sh. Also need to disable selinux or flash a kernel with it disabled (MiPa kernel is what I used). Now reboot and you should have edxposed working.

[Solved for now] Unable to install Edxposed

I just upgraded to Oxygen OS 10.0.1.GM57AA from 9.5.8 (if I remember rightly, from India ).
I tried the following with Magisk 19.3 and 20:
1. No other Magisk modules only Riru Core - no problems.
2. Install Riru latest Ed xposed YAHFA. Device didn't get booted. Booted into TWRP side loaded Magisk Manager, set to core only mode Magisk and rebooted into system and uninstall YAHFA.
3. Tried step 2 with latest Sandhook. Same result
4. Uninstalled all Magisk modules and From EdXposed manager installed Riru core. No problem. Installing YAHFA or Sandhook from Manager, same result - device doesn't boot and spinning dots continue
Has anybody got it working? I searched the forum and elsewhere but couldn't find anything related to our device.
Please explain how you did it
Edit 1
1. Flashing Riru Core and Riru YAHFA/ Sandhook from TWRP (this worked for One Plus 7 Pro) didn't help. Same story of stuck at boot animation.
2. Flashing YAHFA from GravityBox for 10 also had the same problem.
3.. Flashing Canary version of YAHFA (v0.4.5.5_beta(4470) worked and I am able to use Xposed modules ! I don't know how stable this would be but at least I have got the modules I need like XPrivacy Lua installed and working. I didn't try Sandhook because I always found YAHFA to be stabler though slower.
Edit2
Canary version above created drag and gravitybox had a lot of issues. Credit to @C3C076 who pointed out to use YAHFA modified from here https://forum.xda-developers.com/showpost.php?p=80392829&postcount=30 and use the installer 2.2.4 from here https://github.com/solohsu/XposedInstaller/releases/tag/Ed_v2.2.4.
ALL fine
Please update what method you used and which modules used to help others . Thanks

[Fixed/Magisk] safety net Issue

Installing Xposed and passing the SafetyNet check
positive SafetyNet (MagiskHide Props Configs module is not needed), working Google Pay, working Google Play Market and all banking applications.
1. Install modules in Magisk Manager from the "Repository" section:
* Riru - Core (reboot)
* Riru - EdXposed YAHFA (reboot)
2. Install EdXposed Manager:
https://github.com/Eld...XposedManager/releases
3. Install modules through the program EdXposed Manager. We go to the "Search for Modules" section:
* HiddenCore Module - passes SafetyNet check and hides root
4. Make sure that all installed modules are enabled, reboot and check the SafetyNet status in Magisk Manager.

Moblie Signal Fix

Some Custom OS Like Lineage OS, Evolution X, etc. have a common problem - Error in Single Reception.
To fix Follow the following Steps -
DISCLAIMER - I am not responsible if any damage occurs.
1) Flash Magisk Root Manager.
2)Open Magisk Manager and Download and Install given Modules
- Riru (Riru - Core)
- Riru - EdXposed
**REBOOT**
3)Open EdXposed Manager (You will be redirected to Github to download the latest apk), Go to Modules and Enable EdXposed Manager.
**REBOOT**
4)Open EdXposed Manager, Go to Downloads, and Search LTE Mobile Signal Fix.
5) Download, Install and Activate the module in Modules Menu
**REBOOT**
And that's it.
NOTE -> This Method Currently works on Android 9.
**Android 10 Coming Soon**
Youtube Channel - https://www.youtube.com/channel/UCfgOffADDHCh7dOxUeB4NRQ
Video to install EdXposed - https://youtu.be/MezpjCoDRVQ

riru-core download,magisk doesnt see it (?)

Hello!
Please where to download latest riru-core for magisk?
I have found some flashable zips on internet, but tthose are old versions... (riru-core v10, etc).
and i have latest magisk v.21.400 but in magisk search i can't find riru-core at all.. (!)
So where to download official latest riru core please?
or can i browse magisk modules from pc maybe?
any clues why my magisk search doesnt find riru - core at all? i have tryed stable and beta channels, and magisk version is 22.400

Categories

Resources