So xiaomi.eu released a miui 11 android 10 build. I was able to root using magisk 19.5 canary (updated to 20.1 canary now) but have not found a version of edxposed that will boot. Tried multiple versions and always boots to fastboot mode. Oh I am also running the mipa custom kernel.
Anyone know of an edxposed build that will boot?
So I have found the solution. Install riru 19.5 and edxposed v0.4.5.5.beta(4470)(YAHFA) through magisk manager. Then use a root file manager go to /data/adb/modules/riru_edexposed and rename/delete post-fs-data.sh. Also need to disable selinux or flash a kernel with it disabled (MiPa kernel is what I used). Now reboot and you should have edxposed working.
Hi, guys I just wanted to post a guide on how to set up EdXposed on your Pixel 3XL. I have tried using many different setups with riru core, Edxposed, Edxposed Manager app and Edxposed Installer and I have finally found one that is very stable and allows for most of the Xposed modules to work (at least the ones I have tried).
[Last Updated 19/2/2020]
Device: Pixel 3XL
Magisk version : v20.3 Stable
Magisk Manager v7.5.1
Riru Core: v19.7 (Can be downloaded from here)
EdXposed: SandHook-v0.4.6.1 (4497)-release (Can be downloaded from here)
EdXposed Manager: v4.5.4 (Can be downloaded from here)
Instructions:
1. Install Riru Core in Magisk>Modules and then reboot
2. Install the EdXposed Manager app (Do not reboot!)
3. Install the EdXposed module in Magisk>Modules and then reboot
4. Verify Xposed is active by running the EdXposed manager
[Last Updated 19/2/2020]
Verified Xposed modules that are working
GravityBox 10 beta 6
MinMinGuard v2.0.9
Instaprefs v1.2.0
XPrivacyLua v1.27
XposedAlwaysCorrect 1.0.5
XposedSmsCode 2.2.2
Known Issues when using other versions of riru core, edxposed and edxposed manager:
MinMinGuard latest version 2.1.1 causes system bootloop
You guys can try this setup and if you are able to find no issues running updated version of Riru Core and Magisk Manager then please let me know. Respectively if you are able to find any supported/unsupported modules for the pixel 3XL please post the module link, version (and any errors) you are using so I can add it to the list.
Credits to this guy and the thread
Thanks for reading!
On the standard P3:
Device: Pixel 3
Magisk version : Debug ce7cb1ee (20306)
Magisk Manager: Debug ce7cb1ee (276)
Riru Core: v19.7 (Magisk Module Repo)
EdXposed: v0.4.6.1 (4492)-jowfjvqw (YAHFA) by solohsu, MlgmXyysd & rk700
EdXposed Manager: v4.5.2
Modules:
GravityBox 10 beta 6
Fingerprint pay 3.9.5
WeXposed 2.10
XposedSmsCode 2.2.2
Secure Settings 1.3.6u2
wangdaning said:
On the standard P3:
Device: Pixel 3
Magisk version : Debug ce7cb1ee (20306)
Magisk Manager: Debug ce7cb1ee (276)
Riru Core: v19.7 (Magisk Module Repo)
EdXposed: v0.4.6.1 (4492)-jowfjvqw (YAHFA) by solohsu, MlgmXyysd & rk700
EdXposed Manager: v4.5.2
Modules:
GravityBox 10 beta 6
Fingerprint pay 3.9.5
WeXposed 2.10
XposedSmsCode 2.2.2
Secure Settings 1.3.6u2
Click to expand...
Click to collapse
Hi, I was wondering if you had the repo or xda forum links to Fingerprint pay, WeXposed and Secure Settings? I cant seem to find them. Thanks.
First two can be found by googling (or in xda labs app), but cannot locate the secure settings one. Oh, secure settings module installs through the app which is available on google play.
Your instructions for getting EdExposed working on my Pixel 3 XL with HavocOS worked great... thanks!
Hi,
I'm thinking of upgrading to android 11 but I won't do it without the option of using FingerFace for those apps I have that are not using the newer api's for biometric authentication. Has anyone got FingerFace working on Android 11?
yes it does work. I'm on 11 beta 3 and fingerface works, but you have to install the prereleased Riru-edxposed for android R or else you'll bootloop when you install edxposed and reboot. That's what I experienced unless there's a fix I don't know about. However, you might not need xposed or fingerface anymore. I found that the 2 apps I needed fingerface for - Lastpass and Chase app - they've since updated so that you can use face authentication.
neo_lithic3K said:
yes it does work. I'm on 11 beta 3 and fingerface works, but you have to install the prereleased Riru-edxposed for android R or else you'll bootloop when you install edxposed and reboot. That's what I experienced unless there's a fix I don't know about. However, you might not need xposed or fingerface anymore. I found that the 2 apps I needed fingerface for - Lastpass and Chase app - they've since updated so that you can use face authentication.
Click to expand...
Click to collapse
You have the links for riru edxposed for Android R?
You'll need to install Edxposed manager first. Then Go to the third tab called Canary. Select the v0.5.0.6 for android r option and click install. It'll download a file to your phone that you install as a module in magisk. That's how I did it; don't know if there's an easier way
Jiggs82 said:
You have the links for riru edxposed for Android R?
Click to expand...
Click to collapse
This worked for me for release Android 11.
It's pretty hit and miss on what Xposed modules work properly, but FingerFace works.
PSA, do not enable Xposed functionality for MaxLock by Maxr1998... you'll never get to your lockscreen until you somehow disable it.
neo_lithic3K said:
You'll need to install Edxposed manager first. Then Go to the third tab called Canary. Select the v0.5.0.6 for android r option and click install. It'll download a file to your phone that you install as a module in magisk. That's how I did it; don't know if there's an easier way
Click to expand...
Click to collapse
I updated to 11 via fastboot and factory images & magisk. You know, the usual process. But when I went to edxposed it said framework not active. Using latest canary magisk & canary edxposed v0506. I figured it wasn't working for 11 yet (I didn't try and of the 11 Betas) so I rolled back to the July update any help?
I tried Sandhook because I was experimenting... it never worked. Normally I use YAHFA hooking and it worked fine here.
This worked for me on both 11 beta 3 and 11 stable. After you downloaded canary edxposed v0.5.0.6., did you manually install it into magisk using "Install from storage?" Basically:
1) Open Magisk manager canary and go to the Modules page.
2) Click Search and look for: Riru - core. Install it once you find it. Don't reboot.
3) While you're still in Magisk Manager's Modules page, click on "Install from storage" at the top. Select and install the 0.5.0.6. file you downloaded from edxposed earlier.
4) Riru-Edxposed v0.5.0.6. android_r will appear as an installed module. (I installed the sandhook version.)
5) On the safe side, you should probably uninstall any unactivated xposed modules ... if you're able to. This way you're rebooting without any xposed modules installed. I've had a few times where the module wasn't compatible and I was bootlooped.
6) Reboot phone. and both magisk and edxposed should be active.
Suavie103 said:
I updated to 11 via fastboot and factory images & magisk. You know, the usual process. But when I went to edxposed it said framework not active. Using latest canary magisk & canary edxposed v0506. I figured it wasn't working for 11 yet (I didn't try and of the 11 Betas) so I rolled back to the July update any help?
Click to expand...
Click to collapse
neo_lithic3K said:
yes it does work. I'm on 11 beta 3 and fingerface works, but you have to install the prereleased Riru-edxposed for android R or else you'll bootloop when you install edxposed and reboot. That's what I experienced unless there's a fix I don't know about. However, you might not need xposed or fingerface anymore. I found that the 2 apps I needed fingerface for - Lastpass and Chase app - they've since updated so that you can use face authentication.
Click to expand...
Click to collapse
Thank you! For some reason I just saw this post had replies now ?
Just installed and it's working great ?
neo_lithic3K said:
This worked for me on both 11 beta 3 and 11 stable. After you downloaded canary edxposed v0.5.0.6., did you manually install it into magisk using "Install from storage?" Basically:
1) Open Magisk manager canary and go to the Modules page.
2) Click Search and look for: Riru - core. Install it once you find it. Don't reboot.
3) While you're still in Magisk Manager's Modules page, click on "Install from storage" at the top. Select and install the 0.5.0.6. file you downloaded from edxposed earlier.
4) Riru-Edxposed v0.5.0.6. android_r will appear as an installed module. (I installed the sandhook version.)
5) On the safe side, you should probably uninstall any unactivated xposed modules ... if you're able to. This way you're rebooting without any xposed modules installed. I've had a few times where the module wasn't compatible and I was bootlooped.
6) Reboot phone. and both magisk and edxposed should be active.
Click to expand...
Click to collapse
What edxposed mods do you use. I use gravity box. But I don't think it's supporting 11 yet.
Yeah, GravityBox for 11 hasn't been released yet. I use fingerface, AFwall+, and Root calll sms manager.
Suavie103 said:
What edxposed mods do you use. I use gravity box. But I don't think it's supporting 11 yet.
Click to expand...
Click to collapse
Any chance you have a link to the 5.0.6? i cannot seem to find it
EDIT: Figured it out
neo_lithic3K said:
This worked for me on both 11 beta 3 and 11 stable. After you downloaded canary edxposed v0.5.0.6., did you manually install it into magisk using "Install from storage?" Basically:
1) Open Magisk manager canary and go to the Modules page.
2) Click Search and look for: Riru - core. Install it once you find it. Don't reboot.
3) While you're still in Magisk Manager's Modules page, click on "Install from storage" at the top. Select and install the 0.5.0.6. file you downloaded from edxposed earlier.
4) Riru-Edxposed v0.5.0.6. android_r will appear as an installed module. (I installed the sandhook version.)
5) On the safe side, you should probably uninstall any unactivated xposed modules ... if you're able to. This way you're rebooting without any xposed modules installed. I've had a few times where the module wasn't compatible and I was bootlooped.
6) Reboot phone. and both magisk and edxposed should be active.
Click to expand...
Click to collapse
Just curious what everyone's safetynet status is after having edxposed active on 11? I have it with fingerface and I'm failing CTS profile and basic integrity. If I remove edxposed, I'm back to passing everything. I have the "Pass SafetyNet" option enabled in edxposed manager also.
1dopewrx05 said:
Just curious what everyone's safetynet status is after having edxposed active on 11? I have it with fingerface and I'm failing CTS profile and basic integrity. If I remove edxposed, I'm back to passing everything. I have the "Pass SafetyNet" option enabled in edxposed manager also.
Click to expand...
Click to collapse
I found a flashable magisk mod that allows my pixel 4 xl to pass safety net and cts profile. However my eval type comes back "BASIC" forgot what it means but I'll post the forum link where I found it as well.. Running Android 11, September security patch, stock root & also Gpay works. The mod gives me no issues, try it out. I'll post it in a drive link.
https://forum.xda-developers.com/ap...systemless-t3432382/post83028387#post83028387
https://drive.google.com/file/d/152l4_qIQ7VzSzUpFnNc3Eh61GV7Hgrj4/view?usp=drivesdk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Suavie103 said:
I found a flashable magisk mod that allows my pixel 4 xl to pass safety net and cts profile. However my eval type comes back "BASIC" forgot what it means but I'll post the forum link where I found it as well.. Running Android 11, September security patch, stock root & also Gpay works. The mod gives me no issues, try it out. I'll post it in a drive link.
https://forum.xda-developers.com/ap...systemless-t3432382/post83028387#post83028387
https://drive.google.com/file/d/152l4_qIQ7VzSzUpFnNc3Eh61GV7Hgrj4/view?usp=drivesdk
Click to expand...
Click to collapse
That's extremely strange for me, I use this module as well (have been even before trying edxposed) and as soon as I install the 2 edxposed modules to get xposed set up, I fail safetynet. With the hardware bypass module installed or not installed, I automatically fail safetynet when edxposed is installed on my phone.
I have Magisk (21.3), EdXposed (0.5.0.6), Fingerface (1.1.0) enabled, however I cannot see it working in an application whatsoever, everyone informs me that my device does not support fingerprint Android 11, November update ... Could someone tell me how to adjust?
Haylander Landim said:
I have Magisk (21.3), EdXposed (0.5.0.6), Fingerface (1.1.0) enabled, however I cannot see it working in an application whatsoever, everyone informs me that my device does not support fingerprint Android 11, November update ... Could someone tell me how to adjust?
Click to expand...
Click to collapse
I have the same problem, I think it is the November update :crying:
It's not the November update alone. Fingerface still can work with the coral-rp1a.201105.002 update.
Haylander Landim said:
I have Magisk (21.3), EdXposed (0.5.0.6), Fingerface (1.1.0) enabled, however I cannot see it working in an application whatsoever, everyone informs me that my device does not support fingerprint Android 11, November update ... Could someone tell me how to adjust?
Click to expand...
Click to collapse
Got it!
I removed EdXposed, Magisk and restored the boot.img.
That done:
Installed:
Magisk (Canary 21101)
** restarted the device
MagiskHide Props Config (Latest version)
Systemless Hosts (Latest version)
** restarted the device
Riru (Riru - Core) (21.2)
** restarted the device
Riru - EdXposed (0.5.0.6-android_r (4561) (YAHFA)
** restarted the device
HiddenCore Module (Latest version)
Fingerface (1.1.1)
In MagiskHide I selected, all the way around, Google apps, searching for "google" in the search field
In EdXposed I enabled App List Mode and Pass SafetyNet
At the moment Fingerface works perfectly and SafetyNet has passed!
Video
I'm trying to install latest riru and ed exposed via recovery but to no avail. Flashing riru results in failure. Please help me with the correct version of riru and ed exposed. Thank you.
vineet allahabad said:
I'm trying to install latest riru and ed exposed via recovery but to no avail. Flashing riru results in failure. Please help me with the correct version of riru and ed exposed. Thank you.
Click to expand...
Click to collapse
Riru core and edxposed is available in magisk modules and Git Hub site
Need to flash first- Riru core module and second- edxposed module zip after that continously through magisk manager
It should work
NOTE: It's not possible to install riru and Edxposed through recovery
Hello!
Please where to download latest riru-core for magisk?
I have found some flashable zips on internet, but tthose are old versions... (riru-core v10, etc).
and i have latest magisk v.21.400 but in magisk search i can't find riru-core at all.. (!)
So where to download official latest riru core please?
or can i browse magisk modules from pc maybe?
any clues why my magisk search doesnt find riru - core at all? i have tryed stable and beta channels, and magisk version is 22.400