I have UK wi-fi model and the screen moves around a little inside the metal surround if you push on the bottom corners. Its only a millimeter or two so not that noticeable. Anyone else have this?
I just got my TF700 and near the top of the screen theres a small circle spot, less than 1 mm in diameter. It seems as if its underneath the glass and cant be wiped off. Its most noticeable when theres a bright background and its darker than its surroundings.
Has anyone else had this happen to their transformer? Is it fixable? Or should I get it exchanged?
SoapBawks said:
I just got my TF700 and near the top of the screen theres a small circle spot, less than 1 mm in diameter. It seems as if its underneath the glass and cant be wiped off. Its most noticeable when theres a bright background and its darker than its surroundings.
Has anyone else had this happen to their transformer? Is it fixable? Or should I get it exchanged?
Click to expand...
Click to collapse
I also have something black sandwiched between the glass and screen as well. Drives me crazy when browsing the web since most pages have a white background.
Looks like a small piece of debris got under there during the manufacturing process. Shame because everything else with my infinity is perfect. It's too noticeable to ignore so I'm going to have to swap it out for another.
Artimis said:
I also have something black sandwiched between the glass and screen as well. Drives me crazy when browsing the web since most pages have a white background.
Looks like a small piece of debris got under there during the manufacturing process. Shame because everything else with my infinity is perfect. It's too noticeable to ignore so I'm going to have to swap it out for another.
Click to expand...
Click to collapse
I might replace mine too, but it doesnt look like its debris. It's just slightly darker than its surroundings.
Somehow I managed to chip a "divot" out of the body of my s7 (the regular one, not the galaxy edge). It's a roughly circular divot about 1cm in diameter, located at the 1:00 position above the front camera, on the very edge of the body where it rounds over to the front screen and just narrowly missing the front screen itself. I'm not noticing any problems so far. So, probably annoying but not fatal.
A picture would be good if you can take it, but odds are if it works now, you'll be fine.
Cinco5 said:
A picture would be good if you can take it, but odds are if it works now, you'll be fine.
Click to expand...
Click to collapse
Here you go. You can see just how small the hole really is, but I don't want cracks to propagate from the edges. I wonder if there's something I can fill in the divot with. I've done some googling but people are mostly concerned about scratches.
I wouldn't worry too much about that -- it hit the aluminum and doesn't seem to have caused a separation in the seam.
Typically mars like that are considered normal wear and tear, and shouldn't affect your warranty. I've traded in/warrantied phones with marks like that all the way around the edges.
Did you post this on reddit asking what you could fill in that "diviot" with by anychance?!
Fill it with Aluminium filler and primer used for Alloy rims. I have done that on Galaxy S6. If you do it with patience, will not be very visible.
Sent from my SM-G930F using Tapatalk
Hi guys,
Can you do a quick check with your devices?
How does it feel the main camera glass? How does it fits? (Is it uniform and leveled all the way? Or is some a part slightly higher than the rest?)
I mean, I can see that mine isn't all uniformly placed on is notch. And if I press the glass I can see that isn't properly solid, since it goes down with the pressure of my finger.
Is this normal? I'm still in time of sending it back, but I would like to know if someone else has a similar experience.
Thank you
Ois causes the movement
And there is layers of glass on the camera which can explain why
Well, I would expect the layer of glass to not move when pressured. But maybe it's a normal thing after all
Hello,
Received my Note10+ yesterday, so far love the device.
I just noticed today (this morning) on bright sun / light a gap of couple of millimeters on top of the screen.
Looks like screen is not going to the edge on top side only, is this normal?
Image / full size:
https://screens.urimage.link/20190830_074945.jpg
Please see image for better view / understanding.
Thanks
that gap is for the sensors and speaker
Thank you very much for your time and responding to this thread.
I am a little bit confused, isnt the speaker at the bottom?
I had Samsung S10+ until yesterday, and i do not remember seeing gap like this (its not the same phone, but, probably similar design / i might be wrong though).
Thank you
The gap in the middle 2 arrows are the cut out for the front speaker the other gaps are where the screen meets the frame sometime there bigger on different phones its hut and miss
But if it bothers you exchange it for one that fits a bit better
Thank you very much for responding.
I think i have 15 days to replace / return the phone (i will re-check), but, if its kinda normal, and possible on any other phone, even replacement, i do not think its wise to do it.
Once i put case on, i do not even think it will be that visible (hardly visible now as well if not on bright light).
Biggest concern if this would affect IP68 in anyway
Thanks
s-f-r-j said:
Thank you very much for responding.
I think i have 15 days to replace / return the phone (i will re-check), but, if its kinda normal, and possible on any other phone, even replacement, i do not think its wise to do it.
Once i put case on, i do not even think it will be that visible (hardly visible now as well if not on bright light).
Biggest concern if this would affect IP68 in anyway
Thanks
Click to expand...
Click to collapse
I think there is a way you can test the ip rating without obviously putting it in water
Back when I had the xperia phones you could squeeze the device and check the pressure didn't rise and stay risen to indicate its water tight
Thank you again for your time.
I decided to test that gap by pouring water on it for about 20-30 seconds, no issues at all.
I will not bother with this, will just enjoy the phone.
Thanks again.
The picture link is not working. From my understanding the only small gap should be in the center where the top speaker hole is. But the left and right side of the top speaker till the corner should not have any gap. I am having the same issue. I'm going to check to see if other models are like that.
Same, should not be there.
In the end i decided to return the phone.
Upon closer inspections took some photos and judging by other demo units on display. They all have that white line gap. Some are more noticable than others. But same line can be seen. I compared 3 different phones from different stores. They all exist. It's seems like that white line looks like maybe it's the adhesive glue. The middle does not have it where the ear speaker cutout is, where the ear speaker hole ends on both side left and right white line is visible because of the extra gap on both sides and it appears that the line stops before the corner on each side of the glass on the top. It's maybe nitpicking buts it's really annoying. I checked on the S10 it's not present on that model and none I see on the Note 9 too. I checked. And since it's like white color can be visible inside the small gap line on the top where the glass meets up with the metal frame.
I actually just discovered that I can get a piece of paper down between the top of the screen and the frame on my Note 10 +!!!??? All along the top of the glass - from the top left corner to the right?
Is this what you are talking about? And will the phone still be waterproof? (There could still be a rubber membrane that prevents water from entering the insides of the phone...)