Related
So last night, I root my Inspire with the 1-click method.
This morning, I notice it won't download anything from the marketplace, no matter how many times I clear market data/cache, download manager cache etc., so I figured I might as well go ahead and flash a custom rom.
I load up the latest Cyanogenmod for my phone on the SD card, flash CWM, and reboot into recovery. However, there's an issue with the 1-click as it turns out that makes recovery boot to a blank screen for some people, including me apparently. So, instead of leaving it as it was and using the fix in the 1-click, I for some reason not terribly clear to me, decide it would be a good idea to pop out the battery. Now, it gets stuck at the HTC screen if I try to power it up normally, and if I do the hold power+vol up+vol down thing to try to get it to boot into recovery, it just sits at a blank, as in off, screen. Googling about leads me to wipe and flash a new rom, but if I can't get in to the phone, how exactly do I Do that?
Also, fiddling with the phone as I write this, I put the gold card in and was able to boot into hboot. I can fix it from here, right?
Edit: It turns out letting hboot do its thing brought it out of the boot loop.
Sorry to waste the time of anyone who read this, but it may serve useful to someone else with this problem.
Edit 2: It still, however, won't let me download Anything from the market. Any suggestions there?
OMGMatrix said:
So last night, I root my Inspire with the 1-click method.
This morning, I notice it won't download anything from the marketplace, no matter how many times I clear market data/cache, download manager cache etc., so I figured I might as well go ahead and flash a custom rom.
I load up the latest Cyanogenmod for my phone on the SD card, flash CWM, and reboot into recovery. However, there's an issue with the 1-click as it turns out that makes recovery boot to a blank screen for some people, including me apparently. So, instead of leaving it as it was and using the fix in the 1-click, I for some reason not terribly clear to me, decide it would be a good idea to pop out the battery. Now, it gets stuck at the HTC screen if I try to power it up normally, and if I do the hold power+vol up+vol down thing to try to get it to boot into recovery, it just sits at a blank, as in off, screen. Googling about leads me to wipe and flash a new rom, but if I can't get in to the phone, how exactly do I Do that?
Also, fiddling with the phone as I write this, I put the gold card in and was able to boot into hboot. I can fix it from here, right?
Edit: It turns out letting hboot do its thing brought it out of the boot loop.
Sorry to waste the time of anyone who read this, but it may serve useful to someone else with this problem.
Edit 2: It still, however, won't let me download Anything from the market. Any suggestions there?
Click to expand...
Click to collapse
Were you able to re-flash the same ROM or flash a different one?
I re-flashed the same rom, just a stock root.
I can install apps fine by sending them from the market on my Desktop, but every time I try to download something through the market on the phone itself, it starts the download before immediately sutting to a "download unsuccessful, try again later" dialog box.
OMGMatrix said:
I re-flashed the same rom, just a stock root.
I can install apps fine by sending them from the market on my Desktop, but every time I try to download something through the market on the phone itself, it starts the download before immediately sutting to a "download unsuccessful, try again later" dialog box.
Click to expand...
Click to collapse
Try to unmount and remove the SD card and then try to download from market.
I was on a call and when I hung up, wanted to unlock.
Push the power button, lights on the 4 bottom buttons come on. Screen stays black, no backlight.
Push the button again, lights go off.
Push again, lights come on, no screen.
etc, etc...
I pulled the battery, and put it back in.
Now it's just sitting here saying HTC, but it doesn't get to the "quietly brilliant" ever. It just sits there forever saying HTC.
The phone is hacked, rooted, ENG S-OFF, was running Android Revolution 4G 5.1.6 or something when this all happened.
I can get into the [vol-] + [power] menu (white BG) and to recovery (black BG), but I'm not sure how to transfer files to the SD card to load a new ROM on without Android.
Can I use ADB to push a file across? If so, how?
Is there anything I should try before I wipe my phone? I'd like to back up my apps and SMSs if possible, but won't break down in tears if I can't.
Edit: I don't really know very much about ADB/Fastboot, but when I type ADB Devices the phone doesn't show up, however if I go into "Fastboot" in the white screen, I can type Fastboot Devices and my phone is listed. I suspect I can somehow push across the Android Revolution 4G ROM zip file and wipe/install it from recovery? I'm not sure how though.
WHile the phone is completely off, press and hold the Volume (down) and the Power off/on button (press the volume down first if that makes it easier ,then the power button).
Then you should get to the Hboot screen (white back), in there you should have the option to go to recovery...
As long as you can get to recovery ,your perfectly safe (even if just the hboot page)...In here you can reinstall a new ROM.
You can do so by going to mounts and storage , and choose mount usb storage (or something; make sure your connected to the PC with the USB)..
Your phone should now be connected to your pc Via your SD card..
Just download a new ROM, and then put it somewhere in your SDcard and after that, choose install zip from SDcard and select the ROM file you just transfered.
ANd unfortunately but, if you cant get passed recovery..I believe there would be no way to back up any phone/internal data .
If he wanted to back up some data as long as he has AR 5.1.6 still he should be able to reflash the rom w/o a full wipe to try and get the phone to boot so he can back up.
Some times it works sometimes it doesn't.
Just boot into hboot , then from there get to recovery. Once in recovery, you should now be able to use adb (if fastboot is working, it should see the phone in recovery).
Now put the rom in the platform tools folder(or whereever your tools/adb is (not sure if your using Linux or windows but this should work with either. Now open a terminal to platform-tools(or like earlier, whereever adb and now the rom are) now -
adb push nameofrom.zip /sdcard
nameofrom.zip has to be exactly what the name of the rom is you put in the location that has adb in it.
It will take a few min. to push the whole rom, when its done flash it.
This is all assuming you don't have adb in your enviorn . path- it can be done a little differently if you have it in your path in windows or Linux, but this way will work either way.
Or use fastboot to flash a new system.img, but you'll have to find one or make one- don't know where.
Di11's method is fine, but pardon me if im mistaken, can't he, since he's able to boot into recovery, plug his cord in>mount usb storage>transfer rom to sdcard>unmount>and wipe data/cache/dalvik/flash rom? it would seem easiest
Ya, sometimes I've noticed in the past when ****s all muffed up it wont wanna mount as USB storage. (Dont know why but it happens)This works every time.
di11igaf said:
Ya, sometimes I've noticed in the past when ****s all muffed up it wont wanna mount as USB storage. (Dont know why but it happens)This works every time.
Click to expand...
Click to collapse
Never had a problem like that, least that i know of lol, my baffled mind forgets to put the rom on my phone since i flash your rom and sense rom's daily, so i always just mount while in recovery after wiping everything.. Anyways, OP report which method you used and how it works.
Hey Guys ,
I think my phone is dead or bricked... ...i have tried to root with the hack-ace and had an issue in the middle of the rooting !!...now my phone can't boot , not even recovery mode , pull the battery, put it back in , nothing happens ..when i plug the usb cable into the computer i have the orange led lighting up but no boot is possible...
have any solution for me ?? it would be highly appreciate !!
thanks
maostar said:
Hey Guys ,
I think my phone is dead or bricked... ...i have tried to root with the hack-ace and had an issue in the middle of the rooting !!...now my phone can't boot , not even recovery mode , pull the battery, put it back in , nothing happens ..when i plug the usb cable into the computer i have the orange led lighting up but no boot is possible...
have any solution for me ?? it would be highly appreciate !!
thanks
Click to expand...
Click to collapse
Go back to the hack kit thread, read the op, towards the bottom it talks about hitting the irc for help. Reeeaaadddd then go there for help.
I got your 10 char right here
I'm a noob and I wiped my phone before trying recovery! DERP. Not sure what to do next.
So... I need a little help. I've been looking around and havent been able to find a situation like mine. I've got a completely wiped/factory reset HTC Inspire 4g. SD card is good and reformatted to fat32. Heres the basics. When I press the power button I get 3 vibrate and orange light, when I press volume down and power I get 5 vibrates and green light. When I plug phone in with usb (to computer or charger) I get clockworkmod recovery v5.0.2.7. I am able to toggle through options, all works fine.
This is where I need help and I get easily confused. What do I do to get this phone back to stock settings? I've tried putting the stock pd98img.zip file onto the sd card, then installing via clockwork recovery. When I do this, I get failed installation EVERY time. I've also tried connecting through ace hack kit on my lap top and running the stock settings flash. Whenever it resets the phone it does the 3 vibrates/orange light and stops.
I would really appreciate someone with a little more experience to walk me through what I need to do to recover.
Update: When I try to download the zip from the sd card via clockworkmod I get the error E:Signature Verification Failed. I'm not sure what this means.
If someone can solve my problem I'll buy them lunch or coffee! Some kind of gift card to your favorite place? I'd really like my android back!
Drdandy said:
I'm a noob and I wiped my phone before trying recovery! DERP. Not sure what to do next.
So... I need a little help. I've been looking around and havent been able to find a situation like mine. I've got a completely wiped/factory reset HTC Inspire 4g. SD card is good and reformatted to fat32. Heres the basics. When I press the power button I get 3 vibrate and orange light, when I press volume down and power I get 5 vibrates and green light. When I plug phone in with usb (to computer or charger) I get clockworkmod recovery v5.0.2.7. I am able to toggle through options, all works fine.
This is where I need help and I get easily confused. What do I do to get this phone back to stock settings? I've tried putting the stock pd98img.zip file onto the sd card, then installing via clockwork recovery. When I do this, I get failed installation EVERY time. I've also tried connecting through ace hack kit on my lap top and running the stock settings flash. Whenever it resets the phone it does the 3 vibrates/orange light and stops.
I would really appreciate someone with a little more experience to walk me through what I need to do to recover.
Update: When I try to download the zip from the sd card via clockworkmod I get the error E:Signature Verification Failed. I'm not sure what this means.
If someone can solve my problem I'll buy them lunch or coffee! Some kind of gift card to your favorite place? I'd really like my android back!
Click to expand...
Click to collapse
You only flash pd98 files from fast boot not from CWM recovery. Boot in bootloader and it will find it
I am going to come off as the biggest noob here, but its got to be done. How do you boot in bootloader?
EDIT: Alright. So Bootloader is Volume down and power. My phone won't boot into bootloader. Phone vibrate 5 times and green led comes on. Screen stays black the whole time.
Drdandy said:
I am going to come off as the biggest noob here, but its got to be done. How do you boot in bootloader?
EDIT: Alright. So Bootloader is Volume down and power. My phone won't boot into bootloader. Phone vibrate 5 times and green led comes on. Screen stays black the whole time.
Click to expand...
Click to collapse
Ok i dont use CWM but there maybe an option in there to reboot into bootloader. Try holding volume up and power. Could be confusing devices on that though
zelendel said:
Ok i dont use CWM but there maybe an option in there to reboot into bootloader. Try holding volume up and power. Could be confusing devices on that though
Click to expand...
Click to collapse
Nah, no other combo's work for getting into bootloader or rebooting it. From what I've read on other forums, if I can't get into bootloader, I'm bricked. Do you think since the phone is wiped back to factory settings that HTC would replace it under the warranty?
Since you can boot into recovery, adb should still work. Enter recovery then plug in your phone to PC and run adb reboot bootloader
Have you tried reflashing a rom in recovery aswell?
Drdandy said:
Nah, no other combo's work for getting into bootloader or rebooting it. From what I've read on other forums, if I can't get into bootloader, I'm bricked. Do you think since the phone is wiped back to factory settings that HTC would replace it under the warranty?
Click to expand...
Click to collapse
If you are booting into CWM your not back to factory. As stated above you can use adb to boot into bootloader
Just making sure I'm doing this right as its the first time I've ever use adb commands to me phone. Do I need to downloand Android SDK to write commands to the phone?
Okay. I've learned how to use the adb commands. That was cool. haha. So I popped the battery out, then back in to get to CWM. With phone connected to computer I tried adb reboot bootloader. My phone rebooted itself, but it did the 3 vibrates with a flashing orange LED. Adb reboot recovery does the same thing.
For being in recovery. Are you guys talking about the volume down power combination, when I do this and connect the phone to the pc, the pc doesn't detect the phone. So there is no abd commands/flashing roms to it in recovery.
Drdandy said:
Okay. I've learned how to use the adb commands. That was cool. haha. So I popped the battery out, then back in to get to CWM. With phone connected to computer I tried adb reboot bootloader. My phone rebooted itself, but it did the 3 vibrates with a flashing orange LED. Adb reboot recovery does the same thing.
For being in recovery. Are you guys talking about the volume down power combination, when I do this and connect the phone to the pc, the pc doesn't detect the phone. So there is no abd commands/flashing roms to it in recovery.
Click to expand...
Click to collapse
OK looks like your bootloader is messed up. Go to the ace hack kit thread. There you will find a link foe the IRC chat room. Go there and tell them what you did. They maybe able to help you.
Hey guys,
Forgive me for being frantic and (probably) not taking the steps needed to research this issue, or not taking the time to do so, but I'm sure you can all presumably imagine -if you've not been in this situation before- that it SUCKS not having a phone in this day in age...
My problem: Atrix 2 (Rooted + CWM Recovery) now won't boot passed the "M" Motorola logo upon start up. It won't even allow me to access the factory Android Recovery by holding down Volume Up, Volume Down, and Power. I think I inadvertently bricked the phone? (Hope not!)
Further, the "M" Motorola logo is skewed in appearance, like its not even loading correctly. I'm not sure what to do. This is my first time rooting and getting experienced with custom ROMS.
Anyone able to help this helpless sap?
Thanks is advance to your replies...
Step 1 is where you tell what you did to get into the state you are in. You wouldn't believe how far it goes toward fixing something if you know how it got broken.
Sent from my MB865 using XDA
If you have CWM recovery on boot can't you just do a battery pull? You do NOT want to let that thing bootloop forever until the battery dies.
The End.
KEB64 said:
If you have CWM recovery on boot can't you just do a battery pull? You do NOT want to let that thing bootloop forever until the battery dies.
The End.
Click to expand...
Click to collapse
Agreed pull the battery. If you run out of juice you'll be in some serious trouble.
Did you try to flash the fkz? Unless you have CWM on Boot it's the only way you can get your phone working.
Okay, sorry for not giving a full rundown on what stupidity on my part cause all of this. Let me start by saying that (sadly) I am a great big n00b when it comes to Linux, and I thought that despite my research online I would sort of explore the CWM Recovery 'Advanced' sections.
I downloaded ROM Toolbox from the Play Store, and installed a custom boot animation, and replaced -or thought I was- the startup "M" logo with something else. This is what concerned me: After re-booting, the "M" logo was all crazy looking, with a "stretched" "M" logo over the top of the "regular" logo.
So, I uninstalled the app, but the logo was still all messed up. So, I used Root Uninstaller to get rid of the ROM Toolbox files, still no resolve to the crazy boot logo.
So, I went into CWM Recovery Advanced, and wiped everything. The Dalvik, cache, System, Data, etc... didn't think that it would -what appears to have happened- wipe out the OS on the phone.
I tried pulling the battery, and re-booting, won't boot passed the skewed "M" logo still. Tried getting into Android Recovery, and it looks to go through the recovery goes through its thing, but never boots normally afterward.
Sorry for being such an idiot, I really shouldn't have messed with this while half asleep, and again I can't apologize enough for being such a stupid n00b.
I can attach an image of the boot logo if that helps, but I'm worried I am just S.O.L. at this point...
Also, not sure what an FKZ is. I tried to install a 2.3.6 apk file to my wife's SD card on her phone and booting from the file after putting the SD card into mine. Still nothing.
pull the battery, put it back in, and hold vol up and down while turning on. choose ap fastboot at the menu. go to the thread in my signature and under the mirrors there is also a download of the return to stock script. run it while in fastboot and plugged in with usb. DO NOT pull the chord until it is done. when it is you should be good.
Apex_Strider said:
Okay, sorry for not giving a full rundown on what stupidity on my part cause all of this. Let me start by saying that (sadly) I am a great big n00b when it comes to Linux, and I thought that despite my research online I would sort of explore the CWM Recovery 'Advanced' sections.
I downloaded ROM Toolbox from the Play Store, and installed a custom boot animation, and replaced -or thought I was- the startup "M" logo with something else. This is what concerned me: After re-booting, the "M" logo was all crazy looking, with a "stretched" "M" logo over the top of the "regular" logo.
So, I uninstalled the app, but the logo was still all messed up. So, I used Root Uninstaller to get rid of the ROM Toolbox files, still no resolve to the crazy boot logo.
So, I went into CWM Recovery Advanced, and wiped everything. The Dalvik, cache, System, Data, etc... didn't think that it would -what appears to have happened- wipe out the OS on the phone.
I tried pulling the battery, and re-booting, won't boot passed the skewed "M" logo still. Tried getting into Android Recovery, and it looks to go through the recovery goes through its thing, but never boots normally afterward.
Sorry for being such an idiot, I really shouldn't have messed with this while half asleep, and again I can't apologize enough for being such a stupid n00b.
I can attach an image of the boot logo if that helps, but I'm worried I am just S.O.L. at this point...
Also, not sure what an FKZ is. I tried to install a 2.3.6 apk file to my wife's SD card on her phone and booting from the file after putting the SD card into mine. Still nothing.
Click to expand...
Click to collapse
Yeah wiping the system partition is a no no unless you flash another rom afterwards. Do like ikrasner says and you should be back to normal.
Sent from my MB865 using XDA
Thanks for all the help guys, I really hope that something positive comes about this... though, to go without mention, I certainly need more knowledge on WTH I am doing to my phone: understanding flashing ROMS, what dangers come with rooting, and a vast array of other "all things root" that I need to learn up on.
I will try to install from SD card the 2.3.5 zip tonight, but will it (the phone) look for the newest 2.3.6 OTA update and try to ask me to install? How does that work after rooting, will I re-brick my clearly bricked phone all over again?
As always, thanks for all your replies in advance -you guys really know what's going on here!
can you read chinese?
Maybe I can solve your question,but poor of my english.
and what is your phone type?
at&t hktw or china ?
Sent from my ME865 using xda premium
Apex_Strider said:
Thanks for all the help guys, I really hope that something positive comes about this... though, to go without mention, I certainly need more knowledge on WTH I am doing to my phone: understanding flashing ROMS, what dangers come with rooting, and a vast array of other "all things root" that I need to learn up on.
I will try to install from SD card the 2.3.5 zip tonight, but will it (the phone) look for the newest 2.3.6 OTA update and try to ask me to install? How does that work after rooting, will I re-brick my clearly bricked phone all over again?
As always, thanks for all your replies in advance -you guys really know what's going on here!
Click to expand...
Click to collapse
It should ask you to install 2.3.6. Just go into setting>about phone>check for updates. Or you could go and install one of the roms that are based on 2.3.6 such as Lithium Sonya or SCv5.
Okay gang, perhaps I'm just certifiably dumb, or I am simply just not doing this correctly. I downloaded the "Returntostock2.3.5.script" zip file and copied it to my wife's SD card to 'apply update from sdcard' option from the Android Recovery area by holding Vol Up, Vol Down, & Power buttons. What I got was this:
--Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E:signature verification failed
Installation aborted.
I tried to just plug the USB into the phone and run the 2.3.5. script from there. but again- I'm stuck in the crazy skewed "M" logo startup screen with nothing following. That's all the phone will do at this point, other than my getting into Android Recovery.
I'm not sure how or what fastboot is, or how it works. If the phone is plugged into the USB, it will only boot the stupid screwed up "M" logo screen. Noting else.
Apex_Strider said:
Okay gang, perhaps I'm just certifiably dumb, or I am simply just not doing this correctly. I downloaded the "Returntostock2.3.5.script" zip file and copied it to my wife's SD card to 'apply update from sdcard' option from the Android Recovery area by holding Vol Up, Vol Down, & Power buttons. What I got was this:
--Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E:signature verification failed
Installation aborted.
I tried to just plug the USB into the phone and run the 2.3.5. script from there. but again- I'm stuck in the crazy skewed "M" logo startup screen with nothing following. That's all the phone will do at this point, other than my getting into Android Recovery.
I'm not sure how or what fastboot is, or how it works. If the phone is plugged into the USB, it will only boot the stupid screwed up "M" logo screen. Noting else.
Click to expand...
Click to collapse
do not flash this. unzip it on your computer, choose to boot into fast boot in the same place you chose recovery, then run the .bat file that was in the zip.
Sent from my MB865 using XDA
What that file does is reflash your system.img, basically restoring your phone to factory default. And just as a sidenote you cannot flash things with the standard Android Recovery. You need CWM.
did you try apboot mode and ise fastboot to flash system.img ?
Sent from my ME865 using xda premium
Still not working... not sure how to flash from fastboot. I don't have any options to run a file from there, or at least not sure ow to go about that.
Fastboot sample, hope will help you.
http://bbs.gfan.com/mobile/android-3701449-1-1.html
Sent from my ME865 using xda premium
dickluo said:
Fastboot sample, hope will help you.
http://bbs.gfan.com/mobile/android-3701449-1-1.html
Sent from my ME865 using xda premium
Click to expand...
Click to collapse
So, if I'm looking at this correctly, I need to open command prompt from my computer, and type the commands in from there?
I don't think my computer is recogzining the phone in any way, as I cannot get into the 'manage usb connections' options.
If I have the 2.3.5.script downloaded on my desktop, and l plug my phone in after launching AP Fastboot on the phone, will the computer know where to flash the file to?
I know, I'm a dolt... please bear with me, I really need to get this thing working again -I feel naked without my phone!
Apex_Strider said:
So, if I'm looking at this correctly, I need to open command prompt from my computer, and type the commands in from there?
I don't think my computer is recogzining the phone in any way, as I cannot get into the 'manage usb connections' options.
If I have the 2.3.5.script downloaded on my desktop, and l plug my phone in after launching AP Fastboot on the phone, will the computer know where to flash the file to?
I know, I'm a dolt... please bear with me, I really need to get this thing working again -I feel naked without my phone!
Click to expand...
Click to collapse
Before using the restore script you need to install the usb drivers for your mb865, you can get those from here: http://www.motorola.com/staticfiles/Support/Experiences/Global_Drivers/MotoHelper_2.1.40_Driver_5.5.0.exe
Next unzip the Return to Stock 2.3.5 Fastboot SCRIPT.zip to anywhere you like in your pc (example: C:\RestoreScript\ )
Next connect your phone with the usb cable to the pc and get into fastboot mode for this in your phone press volume down + volume up + power it should appear a screen with some options, use the volume down key of your phone to navigate through the menu until you see the Fastboot option, then enter by pressing the volume up key, this will show you some messages and the finally it should said usb connected.
Then open the folder where you extracted the Return to Stock 2.3.5 Fastboot SCRIPT files and search a .bat file call "Stock Restore" then run the file (double click on it) and it should open a command promt screen with some instructions if the phone is connected correctly and you installed the drivers correctly then in some point the screen will show you the id of your device and it will wait you to press the enter key to start the proccess, press key enter wait all the proccess until the program said to you its finished, after that it will reboot your phone and install the stock 2.3.5 when it boots up you should see the android logo and a progress bar filling up.
when it's done wait the reboot and your phone should be ok.
hope this helps.
jfrank1485 said:
Before using the restore script you need to install the usb drivers for your mb865, you can get those from here: http://www.motorola.com/staticfiles/Support/Experiences/Global_Drivers/MotoHelper_2.1.40_Driver_5.5.0.exe
Next unzip the Return to Stock 2.3.5 Fastboot SCRIPT.zip to anywhere you like in your pc (example: C:\RestoreScript\ )
Next connect your phone with the usb cable to the pc and get into fastboot mode for this in your phone press volume down + volume up + power it should appear a screen with some options, use the volume down key of your phone to navigate through the menu until you see the Fastboot option, then enter by pressing the volume up key, this will show you some messages and the finally it should said usb connected.
Then open the folder where you extracted the Return to Stock 2.3.5 Fastboot SCRIPT files and search a .bat file call "Stock Restore" then run the file (double click on it) and it should open a command promt screen with some instructions if the phone is connected correctly and you installed the drivers correctly then in some point the screen will show you the id of your device and it will wait you to press the enter key to start the proccess, press key enter wait all the proccess until the program said to you its finished, after that it will reboot your phone and install the stock 2.3.5 when it boots up you should see the android logo and a progress bar filling up.
when it's done wait the reboot and your phone should be ok.
hope this helps.
Click to expand...
Click to collapse
jfrank1485,
This stepped me through the entire process without any confusion! Everything is back to normal! Hooray and three Huzzahs!
Also, many many thanks to dickluo, farshad525hou, lkrasner, mtnlion, and KEB64!
You guys really saved my stupid (you know what) on this deal! Next order of business: figure out what the heck I am doing before doing ANYTHING!
Problem solved, my world has regained sanity, and my phone is back to life!
You guys are the best, thank you all so much!!!
Apex_Strider said:
jfrank1485,
This stepped me through the entire process without any confusion! Everything is back to normal! Hooray and three Huzzahs!
Also, many many thanks to dickluo, farshad525hou, lkrasner, mtnlion, and KEB64!
You guys really saved my stupid (you know what) on this deal! Next order of business: figure out what the heck I am doing before doing ANYTHING!
Problem solved, my world has regained sanity, and my phone is back to life!
You guys are the best, thank you all so much!!!
Click to expand...
Click to collapse
I'm glad it work , keep it at hand before doing anything to your phone, it really helps
Hi,
Apologies if this has been asked before, but I've done a relatively thorough search and I can't find a solution to this problem.
I have an S6 (SM-G920F), It was playing up for a few weeks before this, not charging well, and what not, thought it was a cable/hardware issue. Then it stopped working entirely. Initially when it was plugged into the wall it would say it was 91% charged, but if you tried to turn it on it would turn off, and reboot into the charging screen.
I've done quite alot of reading and I've ended up flashing it with Odin (I have a single .md5 file, which i've loaded onto the phone via AP) using the most recent FIrmware UK EE for the SM-G20F. This was successful, however now it only loads the Black screen with white text Samsung S6 powered by android screen and then goes blank and back to the white text screen.
I downloaded an alternative firmware (the one previous version), but this has had the same effect. I've tried to repartition with odin, but this fails.
1.) Is there anyway I can fix this?
2.) If not Is there anyway to remove files whilst in downlod mode?
3.) If I cannot fix it or recover my data, is there anyway to wipe the data securely from my phone so I can sell it for parts?
At present, I can't access recovery mode, only download mode. But whilst Odin communicates with the phone in download mode, I can't seem to access my files from explorer?
1. I would say you'd have to clear cache, immediately after flashing the firmware with Odin, but to do that, you'd have to get to Recovery Mode first...
Why can't you get to it? Does it just start trying to boot nornally? Because if so, it's just a matter of timing it. What I do is... hold power+home+voldown to get to the screen that asks me if I want to get into Download Mode, I press cancel, and immediately start holding power+home+volup until I see the bootsplash screen, and release the power button but keep holding home+volup, and it gets me to Recovery every time, even when I have difficulties such as this.
2. Not that I'm aware of. BUT you could flash TWRP with Odin, and if you then can manage to get to Recovery, you just need to plug your phone into a computer, and your phone will show up in the computer as a device/disk and you can freely remove stuff from it.
If... IF this were to work, I would suggest downloading a stock-based ROM and flashing it. It's far more likely to work properly and bootup without issue than the firmwares you can get, and it's far less much of a headache to do.
3. Nope. There are apps that can wipe data securely (such as Shreddit which does it according to military standards), but it can't be done from Download Mode. There may be some script that could do it in Recovery Mode, but I doubt it.
I mean... technically... you could flash TWRP, go to Recovery, move to your PC all the stuff you want to keep, select the wipe option in TWRP and then transfer randomly generated data from your PC to your phone until it's full - there are many apps that can generate such data. It's not something you could pass off as very very secure, but it should suffice.
I seem to always keep going to trying TWRP - so, you know, give it a shot.
King-V said:
1. I would say you'd have to clear cache, immediately after flashing the firmware with Odin, but to do that, you'd have to get to Recovery Mode first...
Why can't you get to it? Does it just start trying to boot nornally? Because if so, it's just a matter of timing it. What I do is... hold power+home+voldown to get to the screen that asks me if I want to get into Download Mode, I press cancel, and immediately start holding power+home+volup until I see the bootsplash screen, and release the power button but keep holding home+volup, and it gets me to Recovery every time, even when I have difficulties such as this.
2. Not that I'm aware of. BUT you could flash TWRP with Odin, and if you then can manage to get to Recovery, you just need to plug your phone into a computer, and your phone will show up in the computer as a device/disk and you can freely remove stuff from it.
If... IF this were to work, I would suggest downloading a stock-based ROM and flashing it. It's far more likely to work properly and bootup without issue than the firmwares you can get, and it's far less much of a headache to do.
3. Nope. There are apps that can wipe data securely (such as Shreddit which does it according to military standards), but it can't be done from Download Mode. There may be some script that could do it in Recovery Mode, but I doubt it.
I mean... technically... you could flash TWRP, go to Recovery, move to your PC all the stuff you want to keep, select the wipe option in TWRP and then transfer randomly generated data from your PC to your phone until it's full - there are many apps that can generate such data. It's not something you could pass off as very very secure, but it should suffice.
I seem to always keep going to trying TWRP - so, you know, give it a shot.
Click to expand...
Click to collapse
Thanks for your reply! So after flashing it goes straight back into the boot loop. Weirdly if its plugged into my laptop it spend about a second or two on the "Samsung Galaxy S6: Powered by Android" screen before plunging into darkness and shortly after repeating the same message. However if I plug it into the wall it spend over twice as long on that screen before repeating the cycle. It never goes any further.
I've tried your suggestion about perhaps its timing for recovery mode, but even if I go straight from cancelling download mode to trying the power, up and home key it doesn't go to recovery. I've tried a variety of timings both plugged into my laptop and plugged into the wall to no avail. If the phone isn't plugged in, it literally won't do anything whatsoever, won't even hint at turning on.
So Next I tried flashing it with TWRP via Odin and nothings changed, exactly the same bootloop and I still can't get into recovery mode.
I'm starting to think that sadly this phone my be beyond repair! Thanks for your help though, much appreciated.
Hi! I usually run out of my bootloops like this:
try this:
1: go to download mode, and press Power + home + volume —
2: As soon as the screen turns black, continue pressing Power and home, quickly release "volume —" and press "volume +". This will get you into recovery mode.
It always worked for me, so I wish the same for you. Good luck! (And sorry for my bad english)
vinicius_guerra said:
Hi! I usually run out of my bootloops like this:
try this:
1: go to download mode, and press Power + home + volume —
2: As soon as the screen turns black, continue pressing Power and home, quickly release "volume —" and press "volume +". This will get you into recovery mode.
It always worked for me, so I wish the same for you. Good luck! (And sorry for my bad english)
Click to expand...
Click to collapse
Hi Vinicius,
Thanks for the suggestion. Unfortunately it didn't work, I even tried flashing it back to a standard ROM from TWRP, but it still didn't do anything, just back to the Samsung logo and the loop continues ever more!
Hi, I have this problem as well.
Originally I had TWRP and root flashed into my phone but for reasons I needed to remove root.
So I followed the Odin route stated here "Mobikin how to remove root from android" (I can't post links but this should be the top result when googling)
However I didn't know if the recovery/boot should have went into AP or BL on the Odin menu and googling didn't give me any answers so I may have tried both....
Right now I tried flashing TWRP and I can't seem to boot into TWRP as well.
I was able to get into recovery mode but clearing data/cache didn't fix it for me.
EDIT: I managed to flash in another stock rom and it boots into the SAMSUNG logo but gets stuck there. I already went into recovery mode to delete data and cache partition but it still doesn't boot.
Melioetta Zyguard said:
Hi, I have this problem as well.
Originally I had TWRP and root flashed into my phone but for reasons I needed to remove root.
So I followed the Odin route stated here "Mobikin how to remove root from android" (I can't post links but this should be the top result when googling)
However I didn't know if the recovery/boot should have went into AP or BL on the Odin menu and googling didn't give me any answers so I may have tried both....
Right now I tried flashing TWRP and I can't seem to boot into TWRP as well.
I was able to get into recovery mode but clearing data/cache didn't fix it for me.
EDIT: I managed to flash in another stock rom and it boots into the SAMSUNG logo but gets stuck there. I already went into recovery mode to delete data and cache partition but it still doesn't boot.
Click to expand...
Click to collapse
Same experience. For all those 6 years that I used this device, the wifi was okay until now. It (wifi) is very buggy (turning on and off, and sometimes won't turn on at all) so I restarted the device, then bootloop happens. I flashed the stock rom via odin and clear data and cache. But it is still bootlooping. I think this is the sign that I need to replace my phone IF I couldn't find a fix to this.