Related
I had a Vibrant before and flashed it constantly. I soft bricked it several time and it was easy just to Odin back to stock and try again. Before I begin to flash Roms on this phone I would like to know how one would fix a bricked Nexus S. I searched "bricked Nexus S" and didn't come up with much.
Sent from my Nexus S using XDA App
Flash a stock img thru fastboot/adb. Just as painless as Odin was if not easier.
Sent from my Nexus S
Yeah I figured that much but I have never used ADB before. What are the commands to flash a stock img and where can I get a stock img? I already have ADB set up, serial # comes up when I enter - adb devices. I'm ready to root and flash but I want to be prepared for anything. I don't want to panic for ten minutes like I did the first time I bricked my Vibrant.
Sent from my Nexus S using XDA App
You should be able to snag a stock image from the development section. As far as what adb commands to use check out any of the root tutorials in development.
Sent from my Nexus S
bricking the phone is not easy... everything can be wiped and reinstalled with ease. Recovery is your friend.
leyvatron said:
bricking the phone is not easy... everything can be wiped and reinstalled with ease. Recovery is your friend.
Click to expand...
Click to collapse
That's why I love this phone. When I first rooted my wife's phone she was a nervous wreck about me ruining it. Now, she jokingly cheers when it boot loops or hangs on the google splash screen.
kenvan19 said:
That's why I love this phone. When I first rooted my wife's phone she was a nervous wreck about me ruining it. Now, she jokingly cheers when it boot loops or hangs on the google splash screen.
Click to expand...
Click to collapse
Coolest wife ever? haha
risegeek said:
Coolest wife ever? haha
Click to expand...
Click to collapse
hehe why'd'ya think I married her
Hi Everyone.
I have my Nexus S for a 3 days - it's brand new. Last night i turned it off. It was about 50% charged. Today i can't turn it on. Phone is dead. What's wrong? There is no any response, even during charging (black screen).
Phone wasn't rooted. It has Android 2.3.2 update.
What can I do?
Van_Dyke said:
Hi Everyone.
I have my Nexus S for a 3 days - it's brand new. Last night i turned it off. It was about 50% charged. Today i can't turn it on. Phone is dead. What's wrong? There is no any response, even during charging (black screen).
Phone wasn't rooted. It has Android 2.3.2 update.
What can I do?
Click to expand...
Click to collapse
not enough information is present. you can attempt to get into bootloader / recovery, plug USB to the computer. When plugged, does the computer make a plugged in noise? if it does.. try turning it on, try using adb on it, etc.
as a last resort: if its not rooted or modified in any way, you can go back to best buy and exchange it since you said you've only had it for 3 days
Van_Dyke said:
Hi Everyone.
I have my Nexus S for a 3 days - it's brand new. Last night i turned it off. It was about 50% charged. Today i can't turn it on. Phone is dead. What's wrong? There is no any response, even during charging (black screen).
Phone wasn't rooted. It has Android 2.3.2 update.
What can I do?
Click to expand...
Click to collapse
First thing to do is pull the battery, let it sit a minute or two, then put the battery back in and try to boot.
Also, try booting into recovery or fastboot. With power off, press and hold volume up button, then press/hold power on switch. You should enter fastboot mode. From fastboot menu, select boot to recovery. The phone will reboot and you'll get to a screen with an "!" and an android robot on it. At that point you press hold power, then press/hold volume up (make note that this is the reverse of what you did earlier).
Once in Recovery, try wiping cache from the menu.
Reboot.
If still no good, then repeat the process but pick factory reset/wipe from the menu in recovery. Note that this will wipe all personal data and apps off the phone but it won't touch your sdcard contents.
The case with pull battery - not working.
I can't enter fastmode using 2 keys combination.
Computer don't recognize the phone. It's brick...
Van_Dyke said:
The case with pull battery - not working.
I can't enter fastmode using 2 keys combination.
Computer don't recognize the phone. It's brick...
Click to expand...
Click to collapse
Last option is to try to trick it into Samsung's Download Mode (see the Odin thread in Development section), but if the keys aren't recognized you can't soft boot into it so you'll need a dongle with a resistor to get there.
Sounds like it's truly a brick at this point. You'll probably have to return it, but I'm concerned about returning a phone that has your personal data on it without being able to wipe it. Doesn't seem like much way around that at this point if you can't get fastboot or download.
get the 301k resistor JIG and then you can go into the download mode even without the 2 keys + usb plug
you can always make your own JIG if you have the materials at home or a nearby Radio shack
Thx for all Your advices
Problem was with the dead battery. The battery died during the night - i don't know why. I think the system waren't able to boot up ant start charging process.
My solution:
I took 9V battery, 2 wires and charged dead battery for a while from 9V battery. Then a put it into phone and plug in to wall charger. Charging process started
Now everything is ok
That's pretty scary that it wouldnt take a charge if run down completelty. But hey handy to know incase it happens to any of us,
If you get any repeat i would take it back to get a fresh battery of course (only right to do so).
here's hoping you never need to though
Van_Dyke said:
Thx for all Your advices
Problem was with the dead battery. The battery died during the night - i don't know why. I think the system waren't able to boot up ant start charging process.
My solution:
I took 9V battery, 2 wires and charged dead battery for a while from 9V battery. Then a put it into phone and plug in to wall charger. Charging process started
Now everything is ok
Click to expand...
Click to collapse
That is scary......
Sent from my Nexus S using XDA App
Bricked
Tried unlocking nexus s last night, now it appears bricked. Cannot connect to computer to reflash as it seems to have wiped the driver. Any ideas on how to bring it back from the dead? thanks
I have managed to see the phone with fastboot. I was hoping that fastboot update, would re-image the brick. Can anyone let me know the correct syntax. I am not able to copy an image onto the phone. Thanks again
Noob {MAC User}... Please be gentle
Greetings Everyone,
Okay, so I endeavoured to root my phone last night and was successful. I ran into trouble when the clockwork recovery and superuser permissions kept getting removed each time I reboot.
Now, I'm at the Google splash screen with no way to move forward. I'm a mac user and I don't really get the adb thing. Got adb to work with mac from a youtube video, but still not sure what commands to run.
What I've done so far:
- wiped cache
- wiped/factory data reset
- retraced my steps by using terminal to setup superuser permission from this post (http://forum.xda-developers.com/showthread.php?t=927838)
What I think:
- maybe in all of my clicks I removed the ROM, so the phone doesn't have a ROM to work with.
This maybe a really infantile conclusion, but I know there's a solution (had a rooted G1 that I flashed all the time and thought I bricked once but was able to get it back to stock).
Eagerly waiting for a reply... no cell phone if this can't be fixed.
Tamara
warrenb said:
Tried unlocking nexus s last night, now it appears bricked. Cannot connect to computer to reflash as it seems to have wiped the driver. Any ideas on how to bring it back from the dead? thanks
I have managed to see the phone with fastboot. I was hoping that fastboot update, would re-image the brick. Can anyone let me know the correct syntax. I am not able to copy an image onto the phone. Thanks again
Click to expand...
Click to collapse
It would be easier to help you if we knew exactly what you did that caused the problem. You said you tried to unlock it...you mean fastboot oem unlock or something else?
If you can get into fastboot, you're not totally lost, but the computer needs to see the phone to do it.
I'm working in a vacuum here on what your real problem is, but without further details, the things you can try are boot into recovery (from the fastboot mode select boot recovery)...if you're stock recovery, press/hold power, then volume up once you see the android "!". From there wipe cache and whatever else it will let you wipe. Try rebooting. IF that didn't work go back to recovery and try a factory reset of the phone (will delete all your apps and stuff on the phone, but not on the sdcard (pics and stuff).
If none of that works, you can still try getting Clockwork recovery on the phone via fastboot. Boot phone to fastboot and then on computer type the command "fastboot flash recovery <put file name of recovery version you're flashing here>"
Once in clockwork, you should have access to adb via the computer. On your computer go to the Development section here and download any of the various nandroid images posted there. Now you use clockwork mounts and storage menu to mount the sdcard. Then use adb to "adb push <insert path and filename of your nandroid image here> /sdcard"
Unmount the sdcard with the clockwork mounts and storage menu. Now go to the backup menu, select advanced restore and find the nandroid image and restore it.
With any luck, you should be able to boot into a fresh phone.
I was on a call and when I hung up, wanted to unlock.
Push the power button, lights on the 4 bottom buttons come on. Screen stays black, no backlight.
Push the button again, lights go off.
Push again, lights come on, no screen.
etc, etc...
I pulled the battery, and put it back in.
Now it's just sitting here saying HTC, but it doesn't get to the "quietly brilliant" ever. It just sits there forever saying HTC.
The phone is hacked, rooted, ENG S-OFF, was running Android Revolution 4G 5.1.6 or something when this all happened.
I can get into the [vol-] + [power] menu (white BG) and to recovery (black BG), but I'm not sure how to transfer files to the SD card to load a new ROM on without Android.
Can I use ADB to push a file across? If so, how?
Is there anything I should try before I wipe my phone? I'd like to back up my apps and SMSs if possible, but won't break down in tears if I can't.
Edit: I don't really know very much about ADB/Fastboot, but when I type ADB Devices the phone doesn't show up, however if I go into "Fastboot" in the white screen, I can type Fastboot Devices and my phone is listed. I suspect I can somehow push across the Android Revolution 4G ROM zip file and wipe/install it from recovery? I'm not sure how though.
WHile the phone is completely off, press and hold the Volume (down) and the Power off/on button (press the volume down first if that makes it easier ,then the power button).
Then you should get to the Hboot screen (white back), in there you should have the option to go to recovery...
As long as you can get to recovery ,your perfectly safe (even if just the hboot page)...In here you can reinstall a new ROM.
You can do so by going to mounts and storage , and choose mount usb storage (or something; make sure your connected to the PC with the USB)..
Your phone should now be connected to your pc Via your SD card..
Just download a new ROM, and then put it somewhere in your SDcard and after that, choose install zip from SDcard and select the ROM file you just transfered.
ANd unfortunately but, if you cant get passed recovery..I believe there would be no way to back up any phone/internal data .
If he wanted to back up some data as long as he has AR 5.1.6 still he should be able to reflash the rom w/o a full wipe to try and get the phone to boot so he can back up.
Some times it works sometimes it doesn't.
Just boot into hboot , then from there get to recovery. Once in recovery, you should now be able to use adb (if fastboot is working, it should see the phone in recovery).
Now put the rom in the platform tools folder(or whereever your tools/adb is (not sure if your using Linux or windows but this should work with either. Now open a terminal to platform-tools(or like earlier, whereever adb and now the rom are) now -
adb push nameofrom.zip /sdcard
nameofrom.zip has to be exactly what the name of the rom is you put in the location that has adb in it.
It will take a few min. to push the whole rom, when its done flash it.
This is all assuming you don't have adb in your enviorn . path- it can be done a little differently if you have it in your path in windows or Linux, but this way will work either way.
Or use fastboot to flash a new system.img, but you'll have to find one or make one- don't know where.
Di11's method is fine, but pardon me if im mistaken, can't he, since he's able to boot into recovery, plug his cord in>mount usb storage>transfer rom to sdcard>unmount>and wipe data/cache/dalvik/flash rom? it would seem easiest
Ya, sometimes I've noticed in the past when ****s all muffed up it wont wanna mount as USB storage. (Dont know why but it happens)This works every time.
di11igaf said:
Ya, sometimes I've noticed in the past when ****s all muffed up it wont wanna mount as USB storage. (Dont know why but it happens)This works every time.
Click to expand...
Click to collapse
Never had a problem like that, least that i know of lol, my baffled mind forgets to put the rom on my phone since i flash your rom and sense rom's daily, so i always just mount while in recovery after wiping everything.. Anyways, OP report which method you used and how it works.
Hey Guys ,
I think my phone is dead or bricked... ...i have tried to root with the hack-ace and had an issue in the middle of the rooting !!...now my phone can't boot , not even recovery mode , pull the battery, put it back in , nothing happens ..when i plug the usb cable into the computer i have the orange led lighting up but no boot is possible...
have any solution for me ?? it would be highly appreciate !!
thanks
maostar said:
Hey Guys ,
I think my phone is dead or bricked... ...i have tried to root with the hack-ace and had an issue in the middle of the rooting !!...now my phone can't boot , not even recovery mode , pull the battery, put it back in , nothing happens ..when i plug the usb cable into the computer i have the orange led lighting up but no boot is possible...
have any solution for me ?? it would be highly appreciate !!
thanks
Click to expand...
Click to collapse
Go back to the hack kit thread, read the op, towards the bottom it talks about hitting the irc for help. Reeeaaadddd then go there for help.
I got your 10 char right here
Hey guys,
Forgive me for being frantic and (probably) not taking the steps needed to research this issue, or not taking the time to do so, but I'm sure you can all presumably imagine -if you've not been in this situation before- that it SUCKS not having a phone in this day in age...
My problem: Atrix 2 (Rooted + CWM Recovery) now won't boot passed the "M" Motorola logo upon start up. It won't even allow me to access the factory Android Recovery by holding down Volume Up, Volume Down, and Power. I think I inadvertently bricked the phone? (Hope not!)
Further, the "M" Motorola logo is skewed in appearance, like its not even loading correctly. I'm not sure what to do. This is my first time rooting and getting experienced with custom ROMS.
Anyone able to help this helpless sap?
Thanks is advance to your replies...
Step 1 is where you tell what you did to get into the state you are in. You wouldn't believe how far it goes toward fixing something if you know how it got broken.
Sent from my MB865 using XDA
If you have CWM recovery on boot can't you just do a battery pull? You do NOT want to let that thing bootloop forever until the battery dies.
The End.
KEB64 said:
If you have CWM recovery on boot can't you just do a battery pull? You do NOT want to let that thing bootloop forever until the battery dies.
The End.
Click to expand...
Click to collapse
Agreed pull the battery. If you run out of juice you'll be in some serious trouble.
Did you try to flash the fkz? Unless you have CWM on Boot it's the only way you can get your phone working.
Okay, sorry for not giving a full rundown on what stupidity on my part cause all of this. Let me start by saying that (sadly) I am a great big n00b when it comes to Linux, and I thought that despite my research online I would sort of explore the CWM Recovery 'Advanced' sections.
I downloaded ROM Toolbox from the Play Store, and installed a custom boot animation, and replaced -or thought I was- the startup "M" logo with something else. This is what concerned me: After re-booting, the "M" logo was all crazy looking, with a "stretched" "M" logo over the top of the "regular" logo.
So, I uninstalled the app, but the logo was still all messed up. So, I used Root Uninstaller to get rid of the ROM Toolbox files, still no resolve to the crazy boot logo.
So, I went into CWM Recovery Advanced, and wiped everything. The Dalvik, cache, System, Data, etc... didn't think that it would -what appears to have happened- wipe out the OS on the phone.
I tried pulling the battery, and re-booting, won't boot passed the skewed "M" logo still. Tried getting into Android Recovery, and it looks to go through the recovery goes through its thing, but never boots normally afterward.
Sorry for being such an idiot, I really shouldn't have messed with this while half asleep, and again I can't apologize enough for being such a stupid n00b.
I can attach an image of the boot logo if that helps, but I'm worried I am just S.O.L. at this point...
Also, not sure what an FKZ is. I tried to install a 2.3.6 apk file to my wife's SD card on her phone and booting from the file after putting the SD card into mine. Still nothing.
pull the battery, put it back in, and hold vol up and down while turning on. choose ap fastboot at the menu. go to the thread in my signature and under the mirrors there is also a download of the return to stock script. run it while in fastboot and plugged in with usb. DO NOT pull the chord until it is done. when it is you should be good.
Apex_Strider said:
Okay, sorry for not giving a full rundown on what stupidity on my part cause all of this. Let me start by saying that (sadly) I am a great big n00b when it comes to Linux, and I thought that despite my research online I would sort of explore the CWM Recovery 'Advanced' sections.
I downloaded ROM Toolbox from the Play Store, and installed a custom boot animation, and replaced -or thought I was- the startup "M" logo with something else. This is what concerned me: After re-booting, the "M" logo was all crazy looking, with a "stretched" "M" logo over the top of the "regular" logo.
So, I uninstalled the app, but the logo was still all messed up. So, I used Root Uninstaller to get rid of the ROM Toolbox files, still no resolve to the crazy boot logo.
So, I went into CWM Recovery Advanced, and wiped everything. The Dalvik, cache, System, Data, etc... didn't think that it would -what appears to have happened- wipe out the OS on the phone.
I tried pulling the battery, and re-booting, won't boot passed the skewed "M" logo still. Tried getting into Android Recovery, and it looks to go through the recovery goes through its thing, but never boots normally afterward.
Sorry for being such an idiot, I really shouldn't have messed with this while half asleep, and again I can't apologize enough for being such a stupid n00b.
I can attach an image of the boot logo if that helps, but I'm worried I am just S.O.L. at this point...
Also, not sure what an FKZ is. I tried to install a 2.3.6 apk file to my wife's SD card on her phone and booting from the file after putting the SD card into mine. Still nothing.
Click to expand...
Click to collapse
Yeah wiping the system partition is a no no unless you flash another rom afterwards. Do like ikrasner says and you should be back to normal.
Sent from my MB865 using XDA
Thanks for all the help guys, I really hope that something positive comes about this... though, to go without mention, I certainly need more knowledge on WTH I am doing to my phone: understanding flashing ROMS, what dangers come with rooting, and a vast array of other "all things root" that I need to learn up on.
I will try to install from SD card the 2.3.5 zip tonight, but will it (the phone) look for the newest 2.3.6 OTA update and try to ask me to install? How does that work after rooting, will I re-brick my clearly bricked phone all over again?
As always, thanks for all your replies in advance -you guys really know what's going on here!
can you read chinese?
Maybe I can solve your question,but poor of my english.
and what is your phone type?
at&t hktw or china ?
Sent from my ME865 using xda premium
Apex_Strider said:
Thanks for all the help guys, I really hope that something positive comes about this... though, to go without mention, I certainly need more knowledge on WTH I am doing to my phone: understanding flashing ROMS, what dangers come with rooting, and a vast array of other "all things root" that I need to learn up on.
I will try to install from SD card the 2.3.5 zip tonight, but will it (the phone) look for the newest 2.3.6 OTA update and try to ask me to install? How does that work after rooting, will I re-brick my clearly bricked phone all over again?
As always, thanks for all your replies in advance -you guys really know what's going on here!
Click to expand...
Click to collapse
It should ask you to install 2.3.6. Just go into setting>about phone>check for updates. Or you could go and install one of the roms that are based on 2.3.6 such as Lithium Sonya or SCv5.
Okay gang, perhaps I'm just certifiably dumb, or I am simply just not doing this correctly. I downloaded the "Returntostock2.3.5.script" zip file and copied it to my wife's SD card to 'apply update from sdcard' option from the Android Recovery area by holding Vol Up, Vol Down, & Power buttons. What I got was this:
--Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E:signature verification failed
Installation aborted.
I tried to just plug the USB into the phone and run the 2.3.5. script from there. but again- I'm stuck in the crazy skewed "M" logo startup screen with nothing following. That's all the phone will do at this point, other than my getting into Android Recovery.
I'm not sure how or what fastboot is, or how it works. If the phone is plugged into the USB, it will only boot the stupid screwed up "M" logo screen. Noting else.
Apex_Strider said:
Okay gang, perhaps I'm just certifiably dumb, or I am simply just not doing this correctly. I downloaded the "Returntostock2.3.5.script" zip file and copied it to my wife's SD card to 'apply update from sdcard' option from the Android Recovery area by holding Vol Up, Vol Down, & Power buttons. What I got was this:
--Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E:signature verification failed
Installation aborted.
I tried to just plug the USB into the phone and run the 2.3.5. script from there. but again- I'm stuck in the crazy skewed "M" logo startup screen with nothing following. That's all the phone will do at this point, other than my getting into Android Recovery.
I'm not sure how or what fastboot is, or how it works. If the phone is plugged into the USB, it will only boot the stupid screwed up "M" logo screen. Noting else.
Click to expand...
Click to collapse
do not flash this. unzip it on your computer, choose to boot into fast boot in the same place you chose recovery, then run the .bat file that was in the zip.
Sent from my MB865 using XDA
What that file does is reflash your system.img, basically restoring your phone to factory default. And just as a sidenote you cannot flash things with the standard Android Recovery. You need CWM.
did you try apboot mode and ise fastboot to flash system.img ?
Sent from my ME865 using xda premium
Still not working... not sure how to flash from fastboot. I don't have any options to run a file from there, or at least not sure ow to go about that.
Fastboot sample, hope will help you.
http://bbs.gfan.com/mobile/android-3701449-1-1.html
Sent from my ME865 using xda premium
dickluo said:
Fastboot sample, hope will help you.
http://bbs.gfan.com/mobile/android-3701449-1-1.html
Sent from my ME865 using xda premium
Click to expand...
Click to collapse
So, if I'm looking at this correctly, I need to open command prompt from my computer, and type the commands in from there?
I don't think my computer is recogzining the phone in any way, as I cannot get into the 'manage usb connections' options.
If I have the 2.3.5.script downloaded on my desktop, and l plug my phone in after launching AP Fastboot on the phone, will the computer know where to flash the file to?
I know, I'm a dolt... please bear with me, I really need to get this thing working again -I feel naked without my phone!
Apex_Strider said:
So, if I'm looking at this correctly, I need to open command prompt from my computer, and type the commands in from there?
I don't think my computer is recogzining the phone in any way, as I cannot get into the 'manage usb connections' options.
If I have the 2.3.5.script downloaded on my desktop, and l plug my phone in after launching AP Fastboot on the phone, will the computer know where to flash the file to?
I know, I'm a dolt... please bear with me, I really need to get this thing working again -I feel naked without my phone!
Click to expand...
Click to collapse
Before using the restore script you need to install the usb drivers for your mb865, you can get those from here: http://www.motorola.com/staticfiles/Support/Experiences/Global_Drivers/MotoHelper_2.1.40_Driver_5.5.0.exe
Next unzip the Return to Stock 2.3.5 Fastboot SCRIPT.zip to anywhere you like in your pc (example: C:\RestoreScript\ )
Next connect your phone with the usb cable to the pc and get into fastboot mode for this in your phone press volume down + volume up + power it should appear a screen with some options, use the volume down key of your phone to navigate through the menu until you see the Fastboot option, then enter by pressing the volume up key, this will show you some messages and the finally it should said usb connected.
Then open the folder where you extracted the Return to Stock 2.3.5 Fastboot SCRIPT files and search a .bat file call "Stock Restore" then run the file (double click on it) and it should open a command promt screen with some instructions if the phone is connected correctly and you installed the drivers correctly then in some point the screen will show you the id of your device and it will wait you to press the enter key to start the proccess, press key enter wait all the proccess until the program said to you its finished, after that it will reboot your phone and install the stock 2.3.5 when it boots up you should see the android logo and a progress bar filling up.
when it's done wait the reboot and your phone should be ok.
hope this helps.
jfrank1485 said:
Before using the restore script you need to install the usb drivers for your mb865, you can get those from here: http://www.motorola.com/staticfiles/Support/Experiences/Global_Drivers/MotoHelper_2.1.40_Driver_5.5.0.exe
Next unzip the Return to Stock 2.3.5 Fastboot SCRIPT.zip to anywhere you like in your pc (example: C:\RestoreScript\ )
Next connect your phone with the usb cable to the pc and get into fastboot mode for this in your phone press volume down + volume up + power it should appear a screen with some options, use the volume down key of your phone to navigate through the menu until you see the Fastboot option, then enter by pressing the volume up key, this will show you some messages and the finally it should said usb connected.
Then open the folder where you extracted the Return to Stock 2.3.5 Fastboot SCRIPT files and search a .bat file call "Stock Restore" then run the file (double click on it) and it should open a command promt screen with some instructions if the phone is connected correctly and you installed the drivers correctly then in some point the screen will show you the id of your device and it will wait you to press the enter key to start the proccess, press key enter wait all the proccess until the program said to you its finished, after that it will reboot your phone and install the stock 2.3.5 when it boots up you should see the android logo and a progress bar filling up.
when it's done wait the reboot and your phone should be ok.
hope this helps.
Click to expand...
Click to collapse
jfrank1485,
This stepped me through the entire process without any confusion! Everything is back to normal! Hooray and three Huzzahs!
Also, many many thanks to dickluo, farshad525hou, lkrasner, mtnlion, and KEB64!
You guys really saved my stupid (you know what) on this deal! Next order of business: figure out what the heck I am doing before doing ANYTHING!
Problem solved, my world has regained sanity, and my phone is back to life!
You guys are the best, thank you all so much!!!
Apex_Strider said:
jfrank1485,
This stepped me through the entire process without any confusion! Everything is back to normal! Hooray and three Huzzahs!
Also, many many thanks to dickluo, farshad525hou, lkrasner, mtnlion, and KEB64!
You guys really saved my stupid (you know what) on this deal! Next order of business: figure out what the heck I am doing before doing ANYTHING!
Problem solved, my world has regained sanity, and my phone is back to life!
You guys are the best, thank you all so much!!!
Click to expand...
Click to collapse
I'm glad it work , keep it at hand before doing anything to your phone, it really helps
Hey yall. I had the phone for 6 days before I bricked it. I am wondering if there is any stock recovery mode or anything or what I shsould do? I think something went wrong due to using the root toolbox pro app. I have done some backups within the ap as well as Titanium Backup but now the phone will not boot up and I dont know if/how to put it in factory recovery mode. Soft reset does nothing. The Motorola logo will show on startup but then the screen just blacks out forever, not off, just colored black.
A few details, the phone was rooted with Motofail2go, with no recovery and bootloader still locked as far as I know.
Should I take it to Sprint for a factory reset? Is this even an option? What are my other options?
Next time I will probably use the Moto unlock key so I can open the bootloader all legit like and have a recovery mode...
Try holding power button and the down volume key to power off. Once you power off press and hold them again. This should boot you into fastboot, Motorola's adb shell basically. This can take a couple tries, make sure the phone is powered down completely before hitting volume down and power button to get into fastboot. If you can boot into fastboot you can unlock using this guide: http://www.droid-life.com/2012/08/20/how-to-unlock-the-motorola-photon-q-bootloader/
Once unlocked flash the custom recovery of your choice (I like twrp). You can boot into custom recovery by holding volume up and the power button from a powered down state. Here is the link for instructions on how to flash twrp:
http://forum.xda-developers.com/showthread.php?t=1887070
Then you can download one of the stock backups for the Q posted in the development section and restore them using the custom recovery. Most of the ones I have seen have been compatible with twrp.
The only way to download the stock rom backups is to remove the sd card from your phone, plug your sd card into a PC or other device with a card reader, download the stock backups, and place the stock backup rom files on your sd card. Finally place the sd card with the stock backup downloads into your phone.
These backups and information on how to go through this process can be found in this thread on page 2: http://forum.xda-developers.com/showthread.php?t=2001226
The key is to make a backup of your existing rom with twrp and then move the stock backups from your sd card to the twrp/backups/yourdeiceserial/ directory. That creates a backup directory which twrp knows to look for backups in.
Don't feel bad, I've been in that state several times since getting the Q, live and learn.
Sent from my XT897 using xda app-developers app
UnicronAlpha99 said:
Try holding power button and the down volume key to power off. Once you power off press and hold them again. This should boot you into fastboot, Motorola's adb shell basically. This can take a couple tries, make sure the phone is powered down completely before hitting volume down and power button to get into fastboot. If you can boot into fastboot you can unlock using this guide: http://www.droid-life.com/2012/08/20/how-to-unlock-the-motorola-photon-q-bootloader/
Once unlocked flash the custom recovery of your choice (I like twrp). You can boot into custom recovery by holding volume up and the power button from a powered down state. Here is the link for instructions on how to flash twrp:
http://forum.xda-developers.com/showthread.php?t=1887070
Then you can download one of the stock backups for the Q posted in the development section and restore them using the custom recovery. Most of the ones I have seen have been compatible with twrp.
Don't feel bad, I've been in that state several times since getting the Q, live and learn.
Sent from my XT897 using xda app-developers app
Click to expand...
Click to collapse
If that does not work you could drop it in water or something. You have not officially unlocked boot loader so you still have warranty. Or you could just tell sprint it quit working and act completely clueless. At least its bricked with warranty still intact.
matt2k12 said:
Hey yall. I had the phone for 6 days before I bricked it. I am wondering if there is any stock recovery mode or anything or what I shsould do? I think something went wrong due to using the root toolbox pro app. I have done some backups within the ap as well as Titanium Backup but now the phone will not boot up and I dont know if/how to put it in factory recovery mode. Soft reset does nothing. The Motorola logo will show on startup but then the screen just blacks out forever, not off, just colored black.
A few details, the phone was rooted with Motofail2go, with no recovery and bootloader still locked as far as I know.
Should I take it to Sprint for a factory reset? Is this even an option? What are my other options?
Next time I will probably use the Moto unlock key so I can open the bootloader all legit like and have a recovery mode...
Click to expand...
Click to collapse
Both of the methods above are very effective. When I had the first photon I bricked it and just dropped it in water and did a claim. Depending on the insurance you have that way may cost you $100. The other method should work. When I first got this phone I did the exact same thing and to go back and unlock then flash twrp and in stall a stock backup someone had posted.
Sent from my XT897 using Tapatalk 2
UnicronAlpha99 said:
Try holding power button and the down volume key to power off. Once you power off press and hold them again. This should boot you into fastboot, Motorola's adb shell basically. This can take a couple tries, make sure the phone is powered down completely before hitting volume down and power button to get into fastboot. If you can boot into fastboot you can unlock using this guide: http://www.droid-life.com/2012/08/20/how-to-unlock-the-motorola-photon-q-bootloader/
Click to expand...
Click to collapse
Thanks for the response. Is there anything extra extra special about getting into factory fastboot mode? I can't seem to get it done. Is there an official set of instructions anywhere? Does the phone need to be plugged into the PC? It was always my understanding (for the last week) that Power and Vol Down was the soft reset mode which reboots the phone. Therefore it always tries to reboot in normal mode. This is what keeps happening. It never powers completely down using this method.
Anyhow, once I follow your instructions, the Moto logo appears, no Sprint logo appears, the phone "powers on" but the screen is blacked out (not off). After waiting for a while at the blank/black screen, or holding down several buttons like vol or camera I get the first attachment: "Process system is not responding. Would you like to close it?" When I wait nothing happens. When I push OK nothing happens. By chance, I held down power during the notification and the power menu came up behind the ANR notice (second/third attachments). So obviously there are some things working but the main system isn't booting up. And either factory fastboot is nuked or I can't figure it out. When I power down from this accessible power menu and try to do the fastboot (Power / Vol Down) I still havent gotten it to work.
Any other ideas before I take drastic measures?
Since I bought it from Amazon would that be my best route for return or should I go thru a Sprint store?
Thanks in advance.
Hi again yall. You know once I got to thinking about it, I decided to check out the return policy on Amazon Wireless. They will accept any device under warranty for the first 30 days and it is up to Moto for the next 11 months of warranty coverage. They email me a packing label and it ships out 1 day and they ship out the new phone 1 day shipping. Hard to beat, just takes 2 days of shipping and some more fun times with my Epic, 10.1CM style, in the meantime.
Who's to say it wasnt some sort of hardware or software glitch that bricked the phone rather than my screwing around? Nobody knows and it isn't up to the consumer to prove his innocence. I bought everything legally, all the apps at the app store, and only ran the motofail2go root method. Wasn't running any custom Roms, Mods, or anything. I don't feel bad after they got me for another 2 grand for 24 months, and since I have been with Sprint for 10 years;l I have spent well over 10k or 15k with them lifetime.
If any other method pops up between now and when I ship it out I may give it a shot but if not, ah well, capitalism.
matt2k12 said:
Thanks for the response. Is there anything extra extra special about getting into factory fastboot mode? I can't seem to get it done. Is there an official set of instructions anywhere? Does the phone need to be plugged into the PC? It was always my understanding (for the last week) that Power and Vol Down was the soft reset mode which reboots the phone. Therefore it always tries to reboot in normal mode. This is what keeps happening. It never powers completely down using this method.
Anyhow, once I follow your instructions, the Moto logo appears, no Sprint logo appears, the phone "powers on" but the screen is blacked out (not off). After waiting for a while at the blank/black screen, or holding down several buttons like vol or camera I get the first attachment: "Process system is not responding. Would you like to close it?" When I wait nothing happens. When I push OK nothing happens. By chance, I held down power during the notification and the power menu came up behind the ANR notice (second/third attachments). So obviously there are some things working but the main system isn't booting up. And either factory fastboot is nuked or I can't figure it out. When I power down from this accessible power menu and try to do the fastboot (Power / Vol Down) I still havent gotten it to work.
Any other ideas before I take drastic measures?
Since I bought it from Amazon would that be my best route for return or should I go thru a Sprint store?
Thanks in advance.
Click to expand...
Click to collapse
Try using adb. If your computer has drivers on it for phone you might able to get into fast boot. If that does not work I would try Sprint store first. Have locked my phone up several times while hacking wife off in progress and have used adb every time. Only time i have been truely scared is when i soft bricked my nexus 7. had to stay at work for two hours after i got off to get it to recover because i was scared of her lol.
---------- Post added at 02:05 PM ---------- Previous post was at 01:57 PM ----------
If you get adb to recognize device you could take chance and officially unlock boot loader. Then flash twrp. There is a thread in general section about having trouble getting official update. It has a stock recovery in it. Trick would be moving files to recovery section of twrp
I have gotten the phone to soft power down and get into fast boot and custom recovery. It's a bit tricky with timing, I usually wait for the screen to go black after soft reset, let go, and immediately hold power and volume down. If you can not boot into fastboot I honestly don't know what you can do either than return the phone.
Sent from my XT897 using xda app-developers app
UnicronAlpha99 said:
I have gotten the phone to soft power down and get into fast boot and custom recovery. It's a bit tricky with timing, I usually wait for the screen to go black after soft reset, let go, and immediately hold power and volume down. If you can not boot into fastboot I honestly don't know what you can do either than return the phone.
Sent from my XT897 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the help Unicron. I think Brandons method might be my only alternative... but you know what? I already have the box packed up to ship back to Amazon! I am still a noob; I dunno if I could go the distance on this one. I have been updating my Android SDK files since I got the phone but I never got it to recognize boot up thru ADB fastboot. disclaimer* I havent tried it in a couple days since all teh SDK updates completed.
I dunno though I am a big time DIYer when possible. If it werent for the massive amount of tape I put on the box and packing label I would already be trying this method. I can't convince myself just yet. Amazon makes it too easy. I could have the *new* phone by Friday. Then I wouldn't be wasting my remaining work week trying to hack into my personal Christmas present in order to make it function...........................................
Edit - Yes I'm impatient. My job is too demanding and I am trying to set a good precedent for 2013. Wasting the first 3 work days on a phone is not how I intend to start off the year. There is probably a valuable lesson to be learned from this as far as hacking experience and to be honest with the responses here I think I could get it to boot up from PC in SDK/ADB mode and go from there. I just didnt know if that was possible until after I made the claim with Amazon. I still have an entire day today and tomorrow if I want to indulge myself. It doesnt matter if I mail the package today or Wednesday, I can still get it by Friday. I believe this thread is still valuable because we have patterns of repeating past failures and I may find use of it when I recieve my new phone and, darn it, it mysteriously bricks as well. in the same fashion.... the only thing I was really trying to do was get all my apps on my SD card... sad huh?
Edit 2 - Opened up the box, tried fastboot and adb, nothing. Off she goes.
I don't blame you, it sounds easier to exchange in your case any way. The main suggestion I have is if you are getting into any type of build.prop or operating system tweaks that have potential to lead to boot loops or cause the phone not to boot, then unlock the bootloader and install custom recovery.
The Moto-fail method seems limited to only be able to run apps that require root. For me this has no use as I want to be able to have complete control over all aspects of the Android OS. There is not a huge mod community for the Q as yet but I believe Cyanogen will be a reality as Interloper continues working on it. I came from an Epic with Cyanogen and soft-bricked it a minimum of 50 times. CWM was very forgiving on that phone, the Q is a lot more finicky and frustrating.
If you have insurance through the carrier then you are going to pay $150 for a refurb if something goes wrong and you hard brick the phone. If you unlock bootloader and install custom recovery then you have a fail-safe in the form of nandroid backups and restores. Then you can mod away with little fear.
Good luck on the new phone and I hope you don't give up after six days of modding with the Q!
Sent from my XT897 using xda app-developers app
matt2k12 said:
Thanks for the help Unicron. I think Brandons method might be my only alternative... but you know what? I already have the box packed up to ship back to Amazon! I am still a noob; I dunno if I could go the distance on this one. I have been updating my Android SDK files since I got the phone but I never got it to recognize boot up thru ADB fastboot. disclaimer* I havent tried it in a couple days since all teh SDK updates completed.
I dunno though I am a big time DIYer when possible. If it werent for the massive amount of tape I put on the box and packing label I would already be trying this method. I can't convince myself just yet. Amazon makes it too easy. I could have the *new* phone by Friday. Then I wouldn't be wasting my remaining work week trying to hack into my personal Christmas present in order to make it function...........................................
Edit - Yes I'm impatient. My job is too demanding and I am trying to set a good precedent for 2013. Wasting the first 3 work days on a phone is not how I intend to start off the year. There is probably a valuable lesson to be learned from this as far as hacking experience and to be honest with the responses here I think I could get it to boot up from PC in SDK/ADB mode and go from there. I just didnt know if that was possible until after I made the claim with Amazon. I still have an entire day today and tomorrow if I want to indulge myself. It doesnt matter if I mail the package today or Wednesday, I can still get it by Friday. I believe this thread is still valuable because we have patterns of repeating past failures and I may find use of it when I recieve my new phone and, darn it, it mysteriously bricks as well. in the same fashion.... the only thing I was really trying to do was get all my apps on my SD card... sad huh?
Edit 2 - Opened up the box, tried fastboot and adb, nothing. Off she goes.
Click to expand...
Click to collapse
FWIW, pressing vol down + power til it resets then pressing the camera button + power once the screen is black gets you to the Boot Mode Selection Menu, where you can start recovery, fastboot, BP tools (still not sure what that is entirely) and some others. Seems to be a fairly reliable/easy method for getting to both recovery and fastboot from any point.
befrosty8612 said:
FWIW, pressing vol down + power til it resets then pressing the camera button + power once the screen is black gets you to the Boot Mode Selection Menu, where you can start recovery, fastboot, BP tools (still not sure what that is entirely) and some others. Seems to be a fairly reliable/easy method for getting to both recovery and fastboot from any point.
Click to expand...
Click to collapse
Sure wish I would have known that ahead of time. Does this work without any recovery mode and with the bootloader still locked?
matt2k12 said:
Sure wish I would have known that ahead of time. Does this work without any recovery mode and with the bootloader still locked?
Click to expand...
Click to collapse
It does work without any recovery mode and I believe it still works without the bootloader being unlocked, I didn't know about this myself until after I had already unlocked it. Sorry I couldn't help out sooner.
befrosty8612 said:
It does work without any recovery mode and I believe it still works without the bootloader being unlocked, I didn't know about this myself until after I had already unlocked it. Sorry I couldn't help out sooner.
Click to expand...
Click to collapse
Awesome, I am wanting to do the backdoor root method again but, of course, may brick it. I dont think Amazon will keep sending me new ones.... but maybe!
befrosty8612 said:
FWIW, pressing vol down + power til it resets then pressing the camera button + power once the screen is black gets you to the Boot Mode Selection Menu, where you can start recovery, fastboot, BP tools (still not sure what that is entirely) and some others. Seems to be a fairly reliable/easy method for getting to both recovery and fastboot from any point.
Click to expand...
Click to collapse
For anyone concerned, I knew it would only be a matter of time until bricking my new device. This damn Root Toolbox Pro did it to me again, and on a simple, menial task. I am going to be working thru the motions on getting this to work.
Using the instructions quoted I did get stock recovery to work or at least flash on the screen for a split second. Seems like there is a timer on the recovery screen. I am having trouble with the fastboot prompt though on the PC. Do I do it in the "platform-tools" folder which contains fastboot or in the "tools" folder of the main SDK directory? I am really a noob, can you give me the cliff notes of how to get into ADB, fastboot, etc on the Photon Q in order to do a factory reset? I already have Android SDK installed and completely up to date so that is done. And Fastboot is installed. I'm just having trouble crossing the finish line here... I can get the fastboot page opened in the stock recovery but from there I'm lost. I dont know what to type into the command prompt, in what directory, or what.... Also when I open the command prompt in the SDK folder on the PC with fastboot in the directory and type "adb reboot bootloader" it says "device not found". Maybe (surely) that is the wrong prompt?
FWIW my phone is showing the dead android guy. I didnt do anything besides try and clear up my Play Store download list which required a reboot. The phone never started back up. I dont know how much damage was done or info was lost or whatever, but seeing as how I was rooted but still locked, I had no custom recovery. So no back ups. Is there anything to restore or am I looking at a full wipe and restore?
matt2k12 said:
For anyone concerned, I knew it would only be a matter of time until bricking my new device. This damn Root Toolbox Pro did it to me again, and on a simple, menial task. I am going to be working thru the motions on getting this to work.
Using the instructions quoted I did get stock recovery to work or at least flash on the screen for a split second. Seems like there is a timer on the recovery screen. I am having trouble with the fastboot prompt though on the PC. Do I do it in the "platform-tools" folder which contains fastboot or in the "tools" folder of the main SDK directory? I am really a noob, can you give me the cliff notes of how to get into ADB, fastboot, etc on the Photon Q in order to do a factory reset? I already have Android SDK installed and completely up to date so that is done. And Fastboot is installed. I'm just having trouble crossing the finish line here... I can get the fastboot page opened in the stock recovery but from there I'm lost. I dont know what to type into the command prompt, in what directory, or what.... Also when I open the command prompt in the SDK folder on the PC with fastboot in the directory and type "adb reboot bootloader" it says "device not found". Maybe (surely) that is the wrong prompt?
FWIW my phone is showing the dead android guy. I didnt do anything besides try and clear up my Play Store download list which required a reboot. The phone never started back up. I dont know how much damage was done or info was lost or whatever, but seeing as how I was rooted but still locked, I had no custom recovery. So no back ups. Is there anything to restore or am I looking at a full wipe and restore?
Click to expand...
Click to collapse
As abnormal as it seems, your situation seems pretty normal... at least from my shoes. I went through the same scenario... I didn't know what adb was, or fastboot, etc. So, here's what I know
the fastboot commands work even if adb doesnt see it in the list of devices attached. Somehow it just works (as long as the phone is in fastboot mode).
If you're able to get to the fastboot mode, things should be okay. Just open a windows explorer window to the Platform-Tools, hold the shift key and right click on a blank space within the window, then click open command window here.
you should be able to pass any adb (if the phone is on and recognized) or fastboot (if phone is in fastboot mode) commands from that command prompt.
Also, if you have a stock recovery, CMW, or TWRP image, this is the folder to copy those .img files to. Once you get your phone into fastboot mode and its plugged into the computer, just type into the command prompt:
Code:
fastboot flash recovery recovery.img
If you're just looking to reboot the phone into recovery
If you have a CWM or TWRP recovery just replace the recovery.img with whatever the .img file that you have. Also, as a tip instead of writing the entire file name, just press the first couple letters then press the tab key within the command prompt, it should fill in the rest. keep pressing tab until you get to the .img file name you want.
To avoid doing this again, maybe I can help... what were you trying to do to begin with? From the sound of it, you were trying to root the phone with the Root Toolbox Pro but it bricked, and then you tried to reboot into recovery and then got the red android... ?
befrosty8612 said:
As abnormal as it seems, your situation seems pretty normal... at least from my shoes. I went through the same scenario... I didn't know what adb was, or fastboot, etc. So, here's what I know
the fastboot commands work even if adb doesnt see it in the list of devices attached. Somehow it just works (as long as the phone is in fastboot mode).
If you're able to get to the fastboot mode, things should be okay. Just open a windows explorer window to the Platform-Tools, hold the shift key and right click on a blank space within the window, then click open command window here.
you should be able to pass any adb (if the phone is on and recognized) or fastboot (if phone is in fastboot mode) commands from that command prompt.
Also, if you have a stock recovery, CMW, or TWRP image, this is the folder to copy those .img files to. Once you get your phone into fastboot mode and its plugged into the computer, just type into the command prompt:
Code:
fastboot flash recovery recovery.img
If you're just looking to reboot the phone into recovery
If you have a CWM or TWRP recovery just replace the recovery.img with whatever the .img file that you have. Also, as a tip instead of writing the entire file name, just press the first couple letters then press the tab key within the command prompt, it should fill in the rest. keep pressing tab until you get to the .img file name you want.
To avoid doing this again, maybe I can help... what were you trying to do to begin with? From the sound of it, you were trying to root the phone with the Root Toolbox Pro but it bricked, and then you tried to reboot into recovery and then got the red android... ?
Click to expand...
Click to collapse
Thanks for the response. So, all I have to do is: go to fastboot and flash a stock recovery image file and it will automatically wipe the phone, cache, everything, and restore the operating system? Sounds awfully easy! I found some stock files in this post : http://forum.xda-developers.com/showthread.php?t=2001226&page=2 Are these the ones you used before?
Last question: I can flash CWM or TWRP but wont be able to access them if my bootloader is locked, correct? So flashing a stock recovery will allow me to have my stock phone back again, locked and un-rooted? I guess if I cant get it to work with the stock recovery then I can unlock the bootloader and do a CWM or TWRP recovery and then flash the stock .img files?
Thanks again for your help. I already had root with the motofail2go method which I like using but seems like when I try and use some generic root feature from apps from the app store that it will crash/brick the phone cuz obviously those apps are generalized and likely to brick certain percentage of devices....
Ok what does this mean? Something with the bootlaoder obviously. Does it need to be unlocked?
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools>fastboot flash recover
y qrecovery1.img
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'recovery' (5962 KB)...
OKAY [ 0.479s]
writing 'recovery'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.755s
C:\Program Files (x86)\Android\android-sdk\platform-tools>
And on the phone screen it says "invalid image size for partition recovery" twice for both times I tried this method.
You will need to flash the system image as well if you want those, as the recovery image will only flash the recovery. The files in that link are for twrp only... so you'll have to be able to get there first.
With the custom recoveries, I'm not 100% sure whether or not you will be able to use them without being unlocked. I would wait to see if anyone else can answer that question for you, but if you did try it without an unlocked bootloader, you at least have the stock recovery to fall back on if needed.
Sent from my XT897 using xda app-developers app
---------- Post added at 09:16 PM ---------- Previous post was at 09:12 PM ----------
I'm thinking it could either be that your phone is full and the image you're flashing is too large to fit on the space available...
Or you're trying to flash custom software on a locked phone.
Hopefully someone is able to answer that a little better...
Sent from my XT897 using xda app-developers app
You can't alter the stock recovery (flash a custom recovery like twrp or cwm) in fastboot without having the bootloader unlocked. Your options are to unlock your bootloader, flash custom recovery, create a backup of your current setup, download one of the stock working backups, place it in the backups folder for twrp on your external sd card, and restore one of the known working backups in the development section (befrosty linked to one). Or you could use RSD lite to return to stock using a stock factory firmware flash. That involves connecting your phone to your PC and flashing the phone back to factory stock. Information on RSD Lite and links to the FXZ's can be found here.
http://forum.xda-developers.com/showthread.php?t=2095536
Sent from my XT897 using xda app-developers app
Hey guys. I'm kinda desperated so let's see if there is anything else I can do.
I was playing a game on my phone and it started rebooting alone.
At this point, I long pressed the power button, don't ask me why, but I did it. and bang. it is dead. No boot, no loading, nothing. It still vibrates when I try to turn it on.
I had 30% Battery left.
I have root and my phone for 3 months.
I had Nandroid backup.
Long press power button, volume up + power, volume down + power doesn't work.
When connected to PC, I get the QHSUSB_BULK device on.
Tried to ColorOS Method but:
I cannot install ColorOS drivers cause it doesn't detect them.
I tried Qualcomm drivers and they worked, so then I used the program Msm8974DownloadTool to install ColorOS.
It went okay, all finished and I got the green letters in the end.
Still doesn't boot up, nothing changed.
I cannot detect my phone via ADB. Tried with the drivers and without the drivers and with clean drivers.
What can I do? I always had such care for my phone in case of an emergency, but for some weird reason this happened. I wasn't even messing up with the phone, it just died cause I turned it off while booting up?
Okay so, for some reason, I managed to get my phone on fastboot.
I used this guide http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
To reset my phone.
and the phone did all the new loadings and installs ETC....in the end?
My phone still doesn't boot.
Like wow?...
cyldman said:
Okay so, for some reason, I managed to get my phone on fastboot.
I used this guide http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
To reset my phone.
and the phone did all the new loadings and installs ETC....in the end?
My phone still doesn't boot.
Like wow?...
Click to expand...
Click to collapse
I'm sorry I can't help but one bad move was probably resetting back to stock because now you lost your root and adb access..
jukiewalsh said:
I'm sorry I can't help but one bad move was probably resetting back to stock because now you lost your root and adb access..
Click to expand...
Click to collapse
What do you mean I lost my adb access? I can still find my phone there and it's still working. (aparrently)
I tried to use the command "fastboot reboot" and while it turns off the device from windows, it still doesn't boot back up.
cyldman said:
What do you mean I lost my adb access? I can still find my phone there and its still working. (aparrently)
I tried to use the command "fastboot reboot" and while it turns off the device from windows, it still doesnt boot back up.
Click to expand...
Click to collapse
Disregard that then, when the phone is booted you have to manually give adb access but you're right when it's in recovery or other modes it's already there.
Does your screen power on at all? Do you think your LCD/digitizer could've somehow just died on you?
I highly doubt it, it happened when I shut off the phone when it was rebooting. I dont hear anything when I turn on the phone and i cant press anything or slide to unlock. nothing. so ....yeah. Weird stuff is that I did fastboot reboot and now i can't get to fastboot again. sigh.
Read this thread:
http://forum.xda-developers.com/oneplus-one/help/wrong-kernel-black-screen-fastboot-adb-t2835696
Somewhere within it is the solution to your QHSUSB_BULK problem.
Already did bro, and I fixed it, did you even read my full post? I managed to install colorOS, but it's still not booting up.
Hello guys! Last update! My phone was not even vibratting when i pressed power button. I put it to charge and finnaly I got a screen. its not what I wanted...but its a small step!
Its the Low battery charge icon! So...I've heard about this other issue about the phone not charging. Could this be it? I will be trying some techniques like https://forums.oneplus.net/threads/...een-opo-not-booting-due-over-discharge.88107/.
Hopefully it will help, but it may take some days.