Related
I had a Vibrant before and flashed it constantly. I soft bricked it several time and it was easy just to Odin back to stock and try again. Before I begin to flash Roms on this phone I would like to know how one would fix a bricked Nexus S. I searched "bricked Nexus S" and didn't come up with much.
Sent from my Nexus S using XDA App
Flash a stock img thru fastboot/adb. Just as painless as Odin was if not easier.
Sent from my Nexus S
Yeah I figured that much but I have never used ADB before. What are the commands to flash a stock img and where can I get a stock img? I already have ADB set up, serial # comes up when I enter - adb devices. I'm ready to root and flash but I want to be prepared for anything. I don't want to panic for ten minutes like I did the first time I bricked my Vibrant.
Sent from my Nexus S using XDA App
You should be able to snag a stock image from the development section. As far as what adb commands to use check out any of the root tutorials in development.
Sent from my Nexus S
bricking the phone is not easy... everything can be wiped and reinstalled with ease. Recovery is your friend.
leyvatron said:
bricking the phone is not easy... everything can be wiped and reinstalled with ease. Recovery is your friend.
Click to expand...
Click to collapse
That's why I love this phone. When I first rooted my wife's phone she was a nervous wreck about me ruining it. Now, she jokingly cheers when it boot loops or hangs on the google splash screen.
kenvan19 said:
That's why I love this phone. When I first rooted my wife's phone she was a nervous wreck about me ruining it. Now, she jokingly cheers when it boot loops or hangs on the google splash screen.
Click to expand...
Click to collapse
Coolest wife ever? haha
risegeek said:
Coolest wife ever? haha
Click to expand...
Click to collapse
hehe why'd'ya think I married her
Hi Everyone.
I have my Nexus S for a 3 days - it's brand new. Last night i turned it off. It was about 50% charged. Today i can't turn it on. Phone is dead. What's wrong? There is no any response, even during charging (black screen).
Phone wasn't rooted. It has Android 2.3.2 update.
What can I do?
Van_Dyke said:
Hi Everyone.
I have my Nexus S for a 3 days - it's brand new. Last night i turned it off. It was about 50% charged. Today i can't turn it on. Phone is dead. What's wrong? There is no any response, even during charging (black screen).
Phone wasn't rooted. It has Android 2.3.2 update.
What can I do?
Click to expand...
Click to collapse
not enough information is present. you can attempt to get into bootloader / recovery, plug USB to the computer. When plugged, does the computer make a plugged in noise? if it does.. try turning it on, try using adb on it, etc.
as a last resort: if its not rooted or modified in any way, you can go back to best buy and exchange it since you said you've only had it for 3 days
Van_Dyke said:
Hi Everyone.
I have my Nexus S for a 3 days - it's brand new. Last night i turned it off. It was about 50% charged. Today i can't turn it on. Phone is dead. What's wrong? There is no any response, even during charging (black screen).
Phone wasn't rooted. It has Android 2.3.2 update.
What can I do?
Click to expand...
Click to collapse
First thing to do is pull the battery, let it sit a minute or two, then put the battery back in and try to boot.
Also, try booting into recovery or fastboot. With power off, press and hold volume up button, then press/hold power on switch. You should enter fastboot mode. From fastboot menu, select boot to recovery. The phone will reboot and you'll get to a screen with an "!" and an android robot on it. At that point you press hold power, then press/hold volume up (make note that this is the reverse of what you did earlier).
Once in Recovery, try wiping cache from the menu.
Reboot.
If still no good, then repeat the process but pick factory reset/wipe from the menu in recovery. Note that this will wipe all personal data and apps off the phone but it won't touch your sdcard contents.
The case with pull battery - not working.
I can't enter fastmode using 2 keys combination.
Computer don't recognize the phone. It's brick...
Van_Dyke said:
The case with pull battery - not working.
I can't enter fastmode using 2 keys combination.
Computer don't recognize the phone. It's brick...
Click to expand...
Click to collapse
Last option is to try to trick it into Samsung's Download Mode (see the Odin thread in Development section), but if the keys aren't recognized you can't soft boot into it so you'll need a dongle with a resistor to get there.
Sounds like it's truly a brick at this point. You'll probably have to return it, but I'm concerned about returning a phone that has your personal data on it without being able to wipe it. Doesn't seem like much way around that at this point if you can't get fastboot or download.
get the 301k resistor JIG and then you can go into the download mode even without the 2 keys + usb plug
you can always make your own JIG if you have the materials at home or a nearby Radio shack
Thx for all Your advices
Problem was with the dead battery. The battery died during the night - i don't know why. I think the system waren't able to boot up ant start charging process.
My solution:
I took 9V battery, 2 wires and charged dead battery for a while from 9V battery. Then a put it into phone and plug in to wall charger. Charging process started
Now everything is ok
That's pretty scary that it wouldnt take a charge if run down completelty. But hey handy to know incase it happens to any of us,
If you get any repeat i would take it back to get a fresh battery of course (only right to do so).
here's hoping you never need to though
Van_Dyke said:
Thx for all Your advices
Problem was with the dead battery. The battery died during the night - i don't know why. I think the system waren't able to boot up ant start charging process.
My solution:
I took 9V battery, 2 wires and charged dead battery for a while from 9V battery. Then a put it into phone and plug in to wall charger. Charging process started
Now everything is ok
Click to expand...
Click to collapse
That is scary......
Sent from my Nexus S using XDA App
Bricked
Tried unlocking nexus s last night, now it appears bricked. Cannot connect to computer to reflash as it seems to have wiped the driver. Any ideas on how to bring it back from the dead? thanks
I have managed to see the phone with fastboot. I was hoping that fastboot update, would re-image the brick. Can anyone let me know the correct syntax. I am not able to copy an image onto the phone. Thanks again
Noob {MAC User}... Please be gentle
Greetings Everyone,
Okay, so I endeavoured to root my phone last night and was successful. I ran into trouble when the clockwork recovery and superuser permissions kept getting removed each time I reboot.
Now, I'm at the Google splash screen with no way to move forward. I'm a mac user and I don't really get the adb thing. Got adb to work with mac from a youtube video, but still not sure what commands to run.
What I've done so far:
- wiped cache
- wiped/factory data reset
- retraced my steps by using terminal to setup superuser permission from this post (http://forum.xda-developers.com/showthread.php?t=927838)
What I think:
- maybe in all of my clicks I removed the ROM, so the phone doesn't have a ROM to work with.
This maybe a really infantile conclusion, but I know there's a solution (had a rooted G1 that I flashed all the time and thought I bricked once but was able to get it back to stock).
Eagerly waiting for a reply... no cell phone if this can't be fixed.
Tamara
warrenb said:
Tried unlocking nexus s last night, now it appears bricked. Cannot connect to computer to reflash as it seems to have wiped the driver. Any ideas on how to bring it back from the dead? thanks
I have managed to see the phone with fastboot. I was hoping that fastboot update, would re-image the brick. Can anyone let me know the correct syntax. I am not able to copy an image onto the phone. Thanks again
Click to expand...
Click to collapse
It would be easier to help you if we knew exactly what you did that caused the problem. You said you tried to unlock it...you mean fastboot oem unlock or something else?
If you can get into fastboot, you're not totally lost, but the computer needs to see the phone to do it.
I'm working in a vacuum here on what your real problem is, but without further details, the things you can try are boot into recovery (from the fastboot mode select boot recovery)...if you're stock recovery, press/hold power, then volume up once you see the android "!". From there wipe cache and whatever else it will let you wipe. Try rebooting. IF that didn't work go back to recovery and try a factory reset of the phone (will delete all your apps and stuff on the phone, but not on the sdcard (pics and stuff).
If none of that works, you can still try getting Clockwork recovery on the phone via fastboot. Boot phone to fastboot and then on computer type the command "fastboot flash recovery <put file name of recovery version you're flashing here>"
Once in clockwork, you should have access to adb via the computer. On your computer go to the Development section here and download any of the various nandroid images posted there. Now you use clockwork mounts and storage menu to mount the sdcard. Then use adb to "adb push <insert path and filename of your nandroid image here> /sdcard"
Unmount the sdcard with the clockwork mounts and storage menu. Now go to the backup menu, select advanced restore and find the nandroid image and restore it.
With any luck, you should be able to boot into a fresh phone.
I'm a noob and I wiped my phone before trying recovery! DERP. Not sure what to do next.
So... I need a little help. I've been looking around and havent been able to find a situation like mine. I've got a completely wiped/factory reset HTC Inspire 4g. SD card is good and reformatted to fat32. Heres the basics. When I press the power button I get 3 vibrate and orange light, when I press volume down and power I get 5 vibrates and green light. When I plug phone in with usb (to computer or charger) I get clockworkmod recovery v5.0.2.7. I am able to toggle through options, all works fine.
This is where I need help and I get easily confused. What do I do to get this phone back to stock settings? I've tried putting the stock pd98img.zip file onto the sd card, then installing via clockwork recovery. When I do this, I get failed installation EVERY time. I've also tried connecting through ace hack kit on my lap top and running the stock settings flash. Whenever it resets the phone it does the 3 vibrates/orange light and stops.
I would really appreciate someone with a little more experience to walk me through what I need to do to recover.
Update: When I try to download the zip from the sd card via clockworkmod I get the error E:Signature Verification Failed. I'm not sure what this means.
If someone can solve my problem I'll buy them lunch or coffee! Some kind of gift card to your favorite place? I'd really like my android back!
Drdandy said:
I'm a noob and I wiped my phone before trying recovery! DERP. Not sure what to do next.
So... I need a little help. I've been looking around and havent been able to find a situation like mine. I've got a completely wiped/factory reset HTC Inspire 4g. SD card is good and reformatted to fat32. Heres the basics. When I press the power button I get 3 vibrate and orange light, when I press volume down and power I get 5 vibrates and green light. When I plug phone in with usb (to computer or charger) I get clockworkmod recovery v5.0.2.7. I am able to toggle through options, all works fine.
This is where I need help and I get easily confused. What do I do to get this phone back to stock settings? I've tried putting the stock pd98img.zip file onto the sd card, then installing via clockwork recovery. When I do this, I get failed installation EVERY time. I've also tried connecting through ace hack kit on my lap top and running the stock settings flash. Whenever it resets the phone it does the 3 vibrates/orange light and stops.
I would really appreciate someone with a little more experience to walk me through what I need to do to recover.
Update: When I try to download the zip from the sd card via clockworkmod I get the error E:Signature Verification Failed. I'm not sure what this means.
If someone can solve my problem I'll buy them lunch or coffee! Some kind of gift card to your favorite place? I'd really like my android back!
Click to expand...
Click to collapse
You only flash pd98 files from fast boot not from CWM recovery. Boot in bootloader and it will find it
I am going to come off as the biggest noob here, but its got to be done. How do you boot in bootloader?
EDIT: Alright. So Bootloader is Volume down and power. My phone won't boot into bootloader. Phone vibrate 5 times and green led comes on. Screen stays black the whole time.
Drdandy said:
I am going to come off as the biggest noob here, but its got to be done. How do you boot in bootloader?
EDIT: Alright. So Bootloader is Volume down and power. My phone won't boot into bootloader. Phone vibrate 5 times and green led comes on. Screen stays black the whole time.
Click to expand...
Click to collapse
Ok i dont use CWM but there maybe an option in there to reboot into bootloader. Try holding volume up and power. Could be confusing devices on that though
zelendel said:
Ok i dont use CWM but there maybe an option in there to reboot into bootloader. Try holding volume up and power. Could be confusing devices on that though
Click to expand...
Click to collapse
Nah, no other combo's work for getting into bootloader or rebooting it. From what I've read on other forums, if I can't get into bootloader, I'm bricked. Do you think since the phone is wiped back to factory settings that HTC would replace it under the warranty?
Since you can boot into recovery, adb should still work. Enter recovery then plug in your phone to PC and run adb reboot bootloader
Have you tried reflashing a rom in recovery aswell?
Drdandy said:
Nah, no other combo's work for getting into bootloader or rebooting it. From what I've read on other forums, if I can't get into bootloader, I'm bricked. Do you think since the phone is wiped back to factory settings that HTC would replace it under the warranty?
Click to expand...
Click to collapse
If you are booting into CWM your not back to factory. As stated above you can use adb to boot into bootloader
Just making sure I'm doing this right as its the first time I've ever use adb commands to me phone. Do I need to downloand Android SDK to write commands to the phone?
Okay. I've learned how to use the adb commands. That was cool. haha. So I popped the battery out, then back in to get to CWM. With phone connected to computer I tried adb reboot bootloader. My phone rebooted itself, but it did the 3 vibrates with a flashing orange LED. Adb reboot recovery does the same thing.
For being in recovery. Are you guys talking about the volume down power combination, when I do this and connect the phone to the pc, the pc doesn't detect the phone. So there is no abd commands/flashing roms to it in recovery.
Drdandy said:
Okay. I've learned how to use the adb commands. That was cool. haha. So I popped the battery out, then back in to get to CWM. With phone connected to computer I tried adb reboot bootloader. My phone rebooted itself, but it did the 3 vibrates with a flashing orange LED. Adb reboot recovery does the same thing.
For being in recovery. Are you guys talking about the volume down power combination, when I do this and connect the phone to the pc, the pc doesn't detect the phone. So there is no abd commands/flashing roms to it in recovery.
Click to expand...
Click to collapse
OK looks like your bootloader is messed up. Go to the ace hack kit thread. There you will find a link foe the IRC chat room. Go there and tell them what you did. They maybe able to help you.
Okay from the top, have OPO that had paranoid 4.6 Beta 2 working just fine. Was playing with settings(dumb idea) and changed the runtime to ART like i have on multiple other phones just to try it out. Phone rebooted and upgraded all the apps like it should, but about 5 seconds after it booted, screen froze for a second and then it rebooted. Once it rebooted it was up for 5 seconds again and then rebooted again. thus started a continues reboot loop.
Using the five seconds i had i was able to race through settings and switch the runtime back to dalvik. this caused the normal reboot and fixing of apps however once it finished the boot process it began the reboot loop again and there was nothing i could do to stop it.
I booted to recovery and attempted to reflash the last update, that failed.
attempted to wipe cache and dalvik cache and that failed.
attempted factory data reset, that failed
NOW is when i made a mistake, on TWRP i checked system wipe as well as data and cache. Wiped everything.
So, phone was then entirely devoid of OS which is a slight problem. I was able to get into fastboot however and flash cm11s which i figured would fix it, false. Now when it boots the system ui crashes over and over continuously and it wont become stable. Went back to recovery but my twrp was gone and i just had cyanogenmod simple recovery. attempted to get to fastboot mode but its apparently nonexistent, i tried every combination of commands possible to get there but cant. so now im stuck with an unusable OS and a useless recovery and no way to get to fastboot mode that im at least aware of... if there are any other details that could help feel free to help, ill post pictures once i figure out a way to do that.
please, for the love of God, help me.
If you gold the power button for about 15 seconds then it should turn off. Then hold volume up and then press and hold power while still holding volume up for a few seconds and it should boot fastboot mode. Try erasing userdata from there to see if you can recover from the crashing.
tiny4579 said:
If you gold the power button for about 15 seconds then it should turn off. Then hold volume up and then press and hold power while still holding volume up for a few seconds and it should boot fastboot mode. Try erasing userdata from there to see if you can recover from the crashing.
Click to expand...
Click to collapse
I tried that a hundred times, the problem is once the screen turns off, if you keep holding vol up it never comes back on, its something i have never seen before and its exxtremely frustrating. Its like fastboot doesnt exist.
I wiped out everything on my Oneplus two months ago by mistake. Then my phone wont boot up because it had nothing in it except the TWRP. I tried EVERYTHING, to load a Rom into the phone, but it didn't work. It goes through the motion of loading a Rom into your phone and when you are about to hit the 100% level, it says FAILED. It wants you to check the debugging which you can't because your phone wont boot up. Anyways, I purchased a micro usb flash drive and loaded up the Rom into flash drive from my comp's usb. Then I connected it to my phone from TWRP via the micro usb port. After it loaded up the Rom from the flash drive, it booted up. Hope that works.
grenademasta said:
I wiped out everything on my Oneplus two months ago by mistake. Then my phone wont boot up because it had nothing in it except the TWRP. I tried EVERYTHING, to load a Rom into the phone, but it didn't work. It goes through the motion of loading a Rom into your phone and when you are about to hit the 100% level, it says FAILED. It wants you to check the debugging which you can't because your phone wont boot up. Anyways, I purchased a micro usb flash drive and loaded up the Rom into flash drive from my comp's usb. Then I connected it to my phone from TWRP via the micro usb port. After it loaded up the Rom from the flash drive, it booted up. Hope that works.
Click to expand...
Click to collapse
hey i hadnt thought of that, thanks ill try that as soon as i can get my hands on a micro usb flash drive, will the device find it using cyanogenmod simple recovery? twrp is gone for some reason.
Don't know if it will work without TWRP. I only see "Apply Update" then "Apply from ADB" and "Choose from internal storage". Hopefully the phone might recognize additional storage from the micro usb flash drive. Good luck.
grenademasta said:
Don't know if it will work without TWRP. I only see "Apply Update" then "Apply from ADB" and "Choose from internal storage". Hopefully the phone might recognize additional storage from the micro usb flash drive. Good luck.
Click to expand...
Click to collapse
thanks for your help! ill update as soon as i get one
The latest twrp supports mtp and you can use adb push to push the file to sdcard. Its really worth learning.
ugly_duckling said:
I tried that a hundred times, the problem is once the screen turns off, if you keep holding vol up it never comes back on, its something i have never seen before and its exxtremely frustrating. Its like fastboot doesnt exist.
Click to expand...
Click to collapse
You should let go of the power button after the device turns off. Then vol up+power when the phone is off. This is different than what I read for the device but it works for getting me in fastboot.
Try flashing it by adb?
Overdose1986 said:
Try flashing it by adb?
Click to expand...
Click to collapse
tried using adb to push files but got error: closed, tried adb kill-server etc to try and get it to work but it wouldnt go, trust me i have tried a lot of things
as for the holding of the volume up button, ive tried every combination of holding and releasing i could think of, it just wont work :/
ugly_duckling said:
tried using adb to push files but got error: closed, tried adb kill-server etc to try and get it to work but it wouldnt go, trust me i have tried a lot of things
Click to expand...
Click to collapse
He meant using adb sideload
Sent from my Oneplus One
have you had a look at my thread here? sure sounds like one of the issues listed. Take a peak and decide if it's something you'd like to try
Makrilli said:
He meant using adb sideload
Click to expand...
Click to collapse
ya i tried, it wouldnt connect to the phone, tried multiple tweaks from pc side and device side and couldnt get it to work, im probably messing it up somewhere but i tried to follow various "tutorials" to the letter
markbencze said:
have you had a look at my thread here? sure sounds like one of the issues listed. Take a peak and decide if it's something you'd like to try
Click to expand...
Click to collapse
Hey thats exactly how it started when i first reflashed cm11, but i managed to get through and force disable audiofx, from there though it just kept crashing system ui, i will definitely try this when i get outta class.
is there something different ill need to do based on having already disabled audiofx?
ugly_duckling said:
Hey thats exactly how it started when i first reflashed cm11, but i managed to get through and force disable audiofx, from there though it just kept crashing system ui, i will definitely try this when i get outta class.
is there something different ill need to do based on having already disabled audiofx?
Click to expand...
Click to collapse
Disabling it will not fix your issue. My thread tells you what needs to happen. Generally when people decide to try new ideas without proper knowledge is when they get into trouble
ugly_duckling said:
I tried that a hundred times, the problem is once the screen turns off, if you keep holding vol up it never comes back on, its something i have never seen before and its exxtremely frustrating. Its like fastboot doesnt exist.
Click to expand...
Click to collapse
Just a tip, if u can go in fastboot mode, try to disconnect usb from phone first , and then try
markbencze said:
Disabling it will not fix your issue. My thread tells you what needs to happen. Generally when people decide to try new ideas without proper knowledge is when they get into trouble
Click to expand...
Click to collapse
ya i gotcha, i was just wondering if i needed to re-enable audiofx for stuff to work, my other problem with this method is, and correct me if im wrong, but i believe i need to be in fastboot mode? which for some reason is unattainable at the moment..
ugly_duckling said:
ya i gotcha, i was just wondering if i needed to re-enable audiofx for stuff to work, my other problem with this method is, and correct me if im wrong, but i believe i need to be in fastboot mode? which for some reason is unattainable at the moment..
Click to expand...
Click to collapse
Yes and then follow the directions in my thread
luka1002 said:
Just a tip, if u can go in fastboot mode, try to disconnect usb from phone first , and then try
Click to expand...
Click to collapse
idk why, but i read this post and said "what the hell, ill try it again" out loud to myself. unplugged my phone, held down the volume up key and turned it on, IT WENT STRAIGHT TO FASTBOOT. fml thanks guys, i think i can fix everything from here...i dont know how i managed to never do it correctly even though before this happened i booted into fastboot regularly to flash different ROMS...thank you guys very much for the help
If i just use my charger, there is no response from the phone. When i try with the laptop, my laptop makes a sound to show that the phone has been plugged in, but the phone does not respond at all. I had a cm12 nightly flashed, and tried to flash Francos kernel on it, which made the phone get stuck on that blue alien logo when booting. After trying various fixes with no results, i just wiped everything ( i had no backups because i am a stupid ****) and then it got stuck on the Oneplus One logo. Now i am trying this http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541[1] and while i used the flash all.bat file, i noticed that cmd just kept showing waiting for device response (or something like that) which was weird, since it had completed some of the previous actions. Then i looked at my phone, with nothing at the screen. And it is now that it does not boot at all (not into the recovery, fast boot, normally, nothing) and does not show anything while i try to charge. What can i do?
Before the cmd process, the phone was showing up as a unit under Computer, but it is not anymore.
Just before, when i plugged it in, windows showed that something had been connected, but it did not know what, so i assume that there are some driver issues or something, though i have installed the qpst driver.
I also made a reddit post about it, where i got some response, but i could not go through with those either https://www.reddit.com/r/oneplus/comments/3bzwel/my_one_is_not_booting_at_all_and_does_not_react/
Do you know what i am doing wrong? Got any other fixes? Thanks in advance.
One get a otg cable then flash any custom rom using ur pen drive or go to adb and connect ur phone and check in device manager if it shows ur phone there or install any adb driver the try that flashall.bat it will surely work!! But I would say get a otg cable
Transmitted via Bacon
alan2500 said:
If i just use my charger, there is no response from the phone. When i try with the laptop, my laptop makes a sound to show that the phone has been plugged in, but the phone does not respond at all. I had a cm12 nightly flashed, and tried to flash Francos kernel on it, which made the phone get stuck on that blue alien logo when booting. After trying various fixes with no results, i just wiped everything ( i had no backups because i am a stupid ****) and then it got stuck on the Oneplus One logo. Now i am trying this http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541[1] and while i used the flash all.bat file, i noticed that cmd just kept showing waiting for device response (or something like that) which was weird, since it had completed some of the previous actions. Then i looked at my phone, with nothing at the screen. And it is now that it does not boot at all (not into the recovery, fast boot, normally, nothing) and does not show anything while i try to charge. What can i do?
Before the cmd process, the phone was showing up as a unit under Computer, but it is not anymore.
Just before, when i plugged it in, windows showed that something had been connected, but it did not know what, so i assume that there are some driver issues or something, though i have installed the qpst driver.
I also made a reddit post about it, where i got some response, but i could not go through with those either https://www.reddit.com/r/oneplus/comments/3bzwel/my_one_is_not_booting_at_all_and_does_not_react/
Do you know what i am doing wrong? Got any other fixes? Thanks in advance.
Click to expand...
Click to collapse
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
yashshan said:
One get a otg cable then flash any custom rom using ur pen drive or go to adb and connect ur phone and check in device manager if it shows ur phone there or install any adb driver the try that flashall.bat it will surely work!! But I would say get a otg cable
Transmitted via Bacon
Click to expand...
Click to collapse
That won't work, the phone isn't turning on.
Heisenberg said:
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
That won't work, the phone isn't turning on.
Click to expand...
Click to collapse
Thanks a lot, i dont know how i did not come upon that link while trying various fixes, now i can boot the phone again
Heisenberg said:
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
That won't work, the phone isn't turning on.
Click to expand...
Click to collapse
Uh, new problem, i used the toolkit to unlock the bootloader, and i had to use the Ultimate Tool kit to get TWRP on it. When i connect the phone to the pc (windows 7) i keep getting a message saying i have to format the phone before i can use it. When i click that, it says its writing protected. When i boot up the phone, it turns on, and i can go to the home screen (some times) but after a few seconds, it just turns off it self. Sorry for asking for your help again, but do you know of this problem? Google just came up with results for people with battery problems.
Heisenberg said:
Go here:
http://forum.xda-developers.com/oneplus-one/help/guide-unbrick-oneplus-one-t3013732
That won't work, the phone isn't turning on.
Click to expand...
Click to collapse
I am just going to message you again before i mess up my phone even more, after a lot of hassle, i messed something up and redid the guide in the link you sended to me. According to the Oneplus one toolkit, my bootloader is unlocked. I can not enter fastboot, so i can not get a custom recovery or root. I can not turn on the phone normally either. I can Volume up+power button though, which takes me to the ColorOS RECOVERY screen. I would appreciate your help.
alan2500 said:
I am just going to message you again before i mess up my phone even more, after a lot of hassle, i messed something up and redid the guide in the link you sended to me. According to the Oneplus one toolkit, my bootloader is unlocked. I can not enter fastboot, so i can not get a custom recovery or root. I can not turn on the phone normally either. I can Volume up+power button though, which takes me to the ColorOS RECOVERY screen. I would appreciate your help.
Click to expand...
Click to collapse
Get rid of the toolkit,they're nothing but trouble. Plus, you don't need it. Plus, they allow you to bypass some very crucial learning experience. Power + volume up should take you to fastboot, not recovery, the button combo for recovery is power + volume down. Are you sure you can't get into fastboot? Is adb working in ColorOS recovery?
Heisenberg said:
Get rid of the toolkit,they're nothing but trouble. Plus, you don't need it. Plus, they allow you to bypass some very crucial learning experience. Power + volume up should take you to fastboot, not recovery, the button combo for recovery is power + volume down. Are you sure you can't get into fastboot? Is adb working in ColorOS recovery?
Click to expand...
Click to collapse
Oh brainfart, yup, its volume down+power that goes to the recovery. I just tried volume up+power, and now it goes into fastboot. I did try before, and the vibration was there, but no text on the screen. Not sure what to say about adb, when i launch adb.exe the CMD window just opens up, types a bunch in so fast that i cant read it, and then it closes down. It does the same thing when my phone is not plugged in, so i assume it does not work.
alan2500 said:
Oh brainfart, yup, its volume down+power that goes to the recovery. I just tried volume up+power, and now it goes into fastboot. I did try before, and the vibration was there, but no text on the screen. Not sure what to say about adb, when i launch adb.exe the CMD window just opens up, types a bunch in so fast that i cant read it, and then it closes down. It does the same thing when my phone is not plugged in, so i assume it does not work.
Click to expand...
Click to collapse
Ok, you're not meant to launch adb.exe like that though. You go to the folder where adb.exe is located, then hold shift and right click the mouse, and select "open command prompt here" from the menu, then you can issue adb commands. The same process goes for using fastboot. Anyway, now that you have access to fastboot all you should need to do is flash the stock images, go to section 8 of my guide thread for instructions:
http://forum.xda-developers.com/showthread.php?t=2839471
Heisenberg said:
Ok, you're not meant to launch adb.exe like that though. You go to the folder where adb.exe is located, then hold shift and right click the mouse, and select "open command prompt here" from the menu, then you can issue adb commands. The same process goes for using fastboot. Anyway, now that you have access to fastboot all you should need to do is flash the stock images, go to section 8 of my guide thread for instructions:
http://forum.xda-developers.com/showthread.php?t=2839471
Click to expand...
Click to collapse
Thanks a bunch, i got through it this time lol. So just to be sure that i do not end up bricking my phone again, can i just install TWRP, root, then dirty flash the latest CM nightly? I have no idea whats best to go with, and other than long battery life and good performance, i do not really have any needs, so i am thinking the latest cm will be fine. It was a nightly i was running before i bricked the phone actually.
alan2500 said:
Thanks a bunch, i got through it this time lol. So just to be sure that i do not end up bricking my phone again, can i just install TWRP, root, then dirty flash the latest CM nightly? I have no idea whats best to go with, and other than long battery life and good performance, i do not really have any needs, so i am thinking the latest cm will be fine. It was a nightly i was running before i bricked the phone actually.
Click to expand...
Click to collapse
Don't dirty flash, clean flash. Try out the Exodus ROM, great battery life and great features too.
So I broke my phone real good.
Long story short I was following a tutorial on how to fix a softbrick and must have sent a poor command to the phone. The screen was working fine and then I typed fastboot reboot.
Now the screen will no longer turn on. My computer makes a sound like the phone is turning on but I'm not able to send any fastboot or adb commands to it.
Any ideas?
AverageCanadian said:
So I broke my phone real good.
Long story short I was following a tutorial on how to fix a softbrick and must have sent a poor command to the phone. The screen was working fine and then I typed fastboot reboot.
Now the screen will no longer turn on. My computer makes a sound like the phone is turning on but I'm not able to send any fastboot or adb commands to it.
Any ideas?
Click to expand...
Click to collapse
Your description is awfully vague, it'd help if you actually provided the specifics of the guide you were following and exactly what you did.
Basically I was trying to go back to stock. Every time I booted the phone and CM 11s would load to the initial install screen (Choose your language) it would crash. I was able to install TWRP and tried to use ADB push to push another ROM but it wouldn't push so I followed this guide (http://www.technobuzz.net/fix-bricked-dead-oneplus-one-easily/) and tried to install the rom on that page via fastboot. I must have missed a file or something was corrupt.
At the end I typed fastboot reboot. The phone turned off and never really turned back on. No matter who long I hold the power button with or without volume up or down the phone does not vibrate like it is turning on.
The screen does not light up at all, it just stays completely black. The only indication that I have that phone turns on at all is when it is plugged into my PC (Windows 10 machine) I hear the ding like a new USB devices has connected. However, nothing shows up on my computer.
I tried sending a simple fastboot command but it just hangs waiting for a device. I tried adb devices but nothing shows up in the list.
AverageCanadian said:
Basically I was trying to go back to stock. Every time I booted the phone and CM 11s would load to the initial install screen (Choose your language) it would crash. I was able to install TWRP and tried to use ADB push to push another ROM but it wouldn't push so I followed this guide (http://www.technobuzz.net/fix-bricked-dead-oneplus-one-easily/) and tried to install the rom on that page via fastboot. I must have missed a file or something was corrupt.
At the end I typed fastboot reboot. The phone turned off and never really turned back on. No matter who long I hold the power button with or without volume up or down the phone does not vibrate like it is turning on.
The screen does not light up at all, it just stays completely black. The only indication that I have that phone turns on at all is when it is plugged into my PC (Windows 10 machine) I hear the ding like a new USB devices has connected. However, nothing shows up on my computer.
I tried sending a simple fastboot command but it just hangs waiting for a device. I tried adb devices but nothing shows up in the list.
Click to expand...
Click to collapse
Alright, give this a try:
http://www.naldotech.com/fix-bricked-oneplus-one-restore-stock-oneplusrecovery-tool/
Heisenberg said:
Alright, give this a try:
http://www.naldotech.com/fix-bricked-oneplus-one-restore-stock-oneplusrecovery-tool/
Click to expand...
Click to collapse
Thanks for the help. I tried that last night but it was on my Windows 10 machine and didn't seem to work for me. Might have been the root of my issues to start with.
Anyways, thanks again, sent you some beer money for the help.
AverageCanadian said:
Thanks for the help. I tried that last night but it was on my Windows 10 machine and didn't seem to work for me. Might have been the root of my issues to start with.
Anyways, thanks again, sent you some beer money for the help.
Click to expand...
Click to collapse
Yeah it doesn't work with Win10.