Related
Here is the complete guide for rooting Symphony W60. It'll work on any MT6575 device. Tested by me on Windows 7.
Instructions:
1. First you need to download & install MT6575's driver on your PC. For this, install & run this app.
2. Now download & extract this package on your computer.
3. Connect your phone to PC with USB debugging option (Media Mode) enabled (Settings > Developer Options > USB Debugging > Enable).
4. Now click on "TPSparkyRoot.bat" from your extracted folder.
5. And then follow the on-screen instructions.
Tips: It'll reboot your device three times. After every single reboot, you need to wait until your device fully loaded again and connected to your PC automatically. After then you follow the programme instructions.
After last reboot, your phone will be successfully rooted. You'll get busybox installed, superuser access and you can do whatever you want to do like link2sd, reverse tethering etc..
Thank you very much, this is a very useful !:good:
ahnuc said:
Thank you very much, this is a very useful !:good:
Click to expand...
Click to collapse
Welcome :highfive:
Avvio 760
aan_xda said:
Here is the complete guide for rooting Symphony W60. It'll work on any MT6575 device. Tested by me on Windows 7.
Instructions:
1. First you need to download & install MT6575's driver on your PC. For this, install & run this app.
2. Now download & extract this package on your computer.
3. Connect your phone to PC with USB debugging option (Media Mode) enabled (Settings > Developer Options > USB Debugging > Enable).
4. Now click on "TPSparkyRoot.bat" from your extracted folder.
5. And then follow the on-screen instructions.
Tips: It'll reboot your device three times. After every single reboot, you need to wait until your device fully loaded again and connected to your PC automatically. After then you follow the programme instructions.
After last reboot, your phone will be successfully rooted. You'll get busybox installed, superuser access and you can do whatever you want to do like link2sd, reverse tethering etc..
Click to expand...
Click to collapse
Hello, Sorry for my English, I have a cell phone "Avvio 760" runs the same chipset (MT6575) with Android 2.3.6 gingerbread, I wonder if you can do root in this same way, without damaging the cell phone. thanks
---------- Post added at 11:06 PM ---------- Previous post was at 10:55 PM ----------
jheysonamc said:
Hello, Sorry for my English, I have a cell phone "Avvio 760" runs the same chipset (MT6575) with Android 2.3.6 gingerbread, I wonder if you can do root in this same way, without damaging the cell phone. thanks
Click to expand...
Click to collapse
is compatible with me Avvio 760? I hope the answer thanks :crying:
jheysonamc said:
Hello, Sorry for my English, I have a cell phone "Avvio 760" runs the same chipset (MT6575) with Android 2.3.6 gingerbread, I wonder if you can do root in this same way, without damaging the cell phone. thanks
---------- Post added at 11:06 PM ---------- Previous post was at 10:55 PM ----------
is compatible with me Avvio 760? I hope the answer thanks :crying:
Click to expand...
Click to collapse
May be not workable with GB. I think, it's only for ICS. But you can try. By the way, you tried SuperOneClick root, Unlock Root?
Avvio 760
aan_xda said:
May be not workable with GB. I think, it's only for ICS. But you can try. By the way, you tried SuperOneClick root, Unlock Root?
Click to expand...
Click to collapse
none worked, with which one could try? I do not find information about the MT6575 with GB root, please help! ... (sorry for my English) :crying::crying::crying::crying:
jheysonamc said:
none worked, with which one could try? I do not find information about the MT6575 with GB root, please help! ... (sorry for my English) :crying::crying::crying::crying:
Click to expand...
Click to collapse
I get it. Your device's bootloader is locked. So you need to flash custom recovery like CWM or TWRP, then root your phone. Try to find custom recovery for your device.
Avvio 760 Recovery?
aan_xda said:
I get it. Your device's bootloader is locked. So you need to flash custom recovery like CWM or TWRP, then root your phone. Try to find custom recovery for your device.
Click to expand...
Click to collapse
Hello! look at the phone has recovery by pressing power and volume, leave these options (muy similar al del samsung ace):
Recovery:
1 - Reboot system now
2 - apply update from sdcard
3 - wipe data / factory reset
4 - wipe cache partition
5 - backup user data
6 - restore user data
is that what you mean? thanks :crying:
jheysonamc said:
Hello! look at the phone has recovery by pressing power and volume, leave these options (muy similar al del samsung ace):
Recovery:
1 - Reboot system now
2 - apply update from sdcard
3 - wipe data / factory reset
4 - wipe cache partition
5 - backup user data
6 - restore user data
is that what you mean? thanks :crying:
Click to expand...
Click to collapse
Nope. That is stock recovery. You need to use custom recovery. But you've a recovery at least, try to flash SuperSU binary files with that, can be worked.
Download this .zips, place them to your sd card (not in any folder) and flash them from recovery with "Apply update zip from SD card" option.
http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip
http://downloads.androidsu.com/superuser/su-bin-3.1.1-arm-signed.zip
Avvio 760 Fear!
aan_xda said:
Nope. That is stock recovery. You need to use custom recovery. But you've a recovery at least, try to flash SuperSU binary files with that, can be worked.
Download this .zips, place them to your sd card (not in any folder) and flash them from recovery with "Apply update zip from SD card" option.
if I proceed to do and not work, it may damage the phone? I have fear, you say? no risk? or is it safe?
Click to expand...
Click to collapse
jheysonamc said:
aan_xda said:
Nope. That is stock recovery. You need to use custom recovery. But you've a recovery at least, try to flash SuperSU binary files with that, can be worked.
Download this .zips, place them to your sd card (not in any folder) and flash them from recovery with "Apply update zip from SD card" option.
if I proceed to do and not work, it may damage the phone? I have fear, you say? no risk? or is it safe?
Click to expand...
Click to collapse
As far as I know. It's risk free. If it'll work, then work. If not, then not. No damage can't be done like bricking.
Click to expand...
Click to collapse
not served ROOT Avvio 760
aan_xda said:
jheysonamc said:
As far as I know. It's risk free. If it'll work, then work. If not, then not. No damage can't be done like bricking.
Click to expand...
Click to collapse
hello, I did, but it does not ... have to wait to take out the root to the MT6575 with Gingerbread (Avvio 760) ... what ideas do you have Thanks :crying::crying::crying::crying:
Click to expand...
Click to collapse
:good:
aan_xda said:
Here is the complete guide for rooting Symphony W60. It'll work on any MT6575 device. Tested by me on Windows 7.
Instructions:
1. First you need to download & install MT6575's driver on your PC. For this, install & run this app.
2. Now download & extract this package on your computer.
3. Connect your phone to PC with USB debugging option (Media Mode) enabled (Settings > Developer Options > USB Debugging > Enable).
4. Now click on "TPSparkyRoot.bat" from your extracted folder.
5. And then follow the on-screen instructions.
Tips: It'll reboot your device three times. After every single reboot, you need to wait until your device fully loaded again and connected to your PC automatically. After then you follow the programme instructions.
After last reboot, your phone will be successfully rooted. You'll get busybox installed, superuser access and you can do whatever you want to do like link2sd, reverse tethering etc..
Click to expand...
Click to collapse
???
xxsnzw said:
:good:
Click to expand...
Click to collapse
he served on android 2.3.6? please answer me, Thanks (Sorry for my English)
Avvio 760!!!
anyone? root for cell Avvio 760? procesador mt6575 with Android 2.3.6 Gingerbread? PLEASE!!! HELP ME!!!
jheysonamc said:
anyone? root for cell Avvio 760? procesador mt6575 with Android 2.3.6 Gingerbread? PLEASE!!! HELP ME!!!
Click to expand...
Click to collapse
Use mtkdroid tools...if failed then find cwm and then flash zipped su binary
mt 6575 root
jheysonamc said:
aan_xda said:
Nope. That is stock recovery. You need to use custom recovery. But you've a recovery at least, try to flash SuperSU binary files with that, can be worked.
Download this .zips, place them to your sd card (not in any folder) and flash them from recovery with "Apply update zip from SD card" option.
if I proceed to do and not work, it may damage the phone? I have fear, you say? no risk? or is it safe?
Click to expand...
Click to collapse
I tried it on my intex aqua 3.2 its not working
Click to expand...
Click to collapse
In order to keep this thread clean, please use this one to discuss about Development, Support or Software Updates.
ROMs:
To avoid any possible issue, do not forget to backup your NVRAM so that you won't risk to lose your IMEI. How-to: http://www.anythingultimate.in/2015/11/how-to-backup-your-nvram-partition.html
Stock (Android 6.0)
- 20161207: https://cloud.mail.ru/public/2Rhv/g4hNyccdM or http://www.doogee.cc/bbs/viewtopic.php?f=10&t=34
DO NOT USE THE "Format All & Download" OPTION IF YOU CARE ABOUT YOUR IMEI! Choose "Download Only" or "Firmware Upgrade" instead.
Previous Releases:
- 20160920: https://drive.google.com/file/d/0Bziqh7RXsn-DcVhmQ1pHS01FdzQ/view
- 20160920 (OTA Update from 20160819, not Stock ROM): https://mega.nz/#!ENV2GRzS!H-JMxGI0aMqEm0wQOCZBZbj0GnFm73dSdAP64MwJqyA
OTA Update can be flashed only via Local Update feature. (Settings -> About phone -> Wireless Update -> Manual Update)
- 20160819: https://drive.google.com/file/d/0BzpZ7jq52i28RXY5N1M4bmJGN2c
Flash Tool
- SP Flash Tool v5.1628 for Windows & Linux: https://mega.nz/#F!dYUm0TbB!SWeMLb5Wu1NbRzTPQ8-s_A
Recovery:
- TWRP 3.0.2: http://joco1114.synology.me/share/F7Pro/TWRP/
Root:
Rooting Methods (if you are on Stock ROM)
- SuperSU (flashable using TWRP): http://forum.xda-developers.com/apps/supersu
Extras (Root-Only):
Customization
- Xposed Framework: http://forum.xda-developers.com/showthread.php?t=3034811
Useful Third-Party Apps:
Battery Life
- Amplify: https://play.google.com/store/apps/details?id=com.ryansteckler.nlpunbounce&hl=en
- Greenify: https://play.google.com/store/apps/details?id=com.oasisfeng.greenify&hl=en
Thank you for this thread, waiting for my own phone. If you need, I can host files as a mirror in 24/7 with 200 mbits up.
Sent from my Nexus 5 using XDA-Developers mobile app
My phone has arrived! It has very nice screen, but the hyped camera is worst than my old Nexus 5 (8MP). Very noisy, and not so detailed. Maybe the next upgrade will solve it.
The problem: is there any idea, how can I access my phone? I have an unknown device in my Device manager, but I cant find driver. Tried MTP and USB device too. Interesting: PTP (Photo transfer) if working!
Thank you!
Edit: Windows 10 driver is not working properly. Have to unisntall it and reinstall MTK USB driver. MTP is working now.
20160819 Stock ROM & OTA Update from 20160819 to 20160920 added to first post
After updating, my 5 GHz WiFi stopped working. (timeout everytime) But 2.4 Ghz is a little faster, more stable.
Any change log?
joco1114 said:
After updating, my 5 GHz WiFi stopped working. (timeout everytime) But 2.4 Ghz is a little faster, more stable.
Any change log?
Click to expand...
Click to collapse
No changelog. My 5.0GHz WiFi works perfectly though.
@joco1114 : have you noticed some battery improvements with the latest OTA update? Here I see huge improvements.
Nope, but the bluetooth connection is better now. And the troubles with WiFi still exist. The SSIDs are vanishing, connection stable, but no internet transmission. I've tried several places with same result. Used Veloxity for better channel selection, but sometimes I got 65/135 Mbps, other 0.1/0.5 only. Or 0/0... The problem mainly appears on 5 GHz network.
Alberto96 said:
@joco1114 : have you noticed some battery improvements with the latest OTA update? Here I see huge improvements.
Click to expand...
Click to collapse
Here's Carliv Touch Recovery, but it's not fully complete yet. Some mounts still don't work, like sdcard, but you still can install root though adb sideload. I'll fix it up later.
goo gl 5h636h
Sorry, can't post links yet.
mars873 said:
Here's Carliv Touch Recovery, but it's not fully complete yet. Some mounts still don't work, like sdcard, but you still can install root though adb sideload. I'll fix it up later.
goo gl 5h636h
Sorry, can't post links yet.
Click to expand...
Click to collapse
Thank you, I appreciate your work.
I'm also facing issues with the touchscreen with any recovery I try to build, there is something we both are doing in the wrong way.
This is the link he can't post: goo.gl/5h636h
How can I install CTR? After that can I install root?
joco1114 said:
How can I install CTR? After that can I install root?
Click to expand...
Click to collapse
Just like TWRP, get the "scatter" file from the Stock ROM package, copy it in a folder (new one, it must be empty) where you put the "recovery.img" file together with the "scatter" file, then open SP Flash Tool, select scatter, press download. Done!
Thank you! I'm very new in this topic, I had a Nexus 5, I used adb/fastboot to flash recovery. MTK (and SP Flash Tool) is new for me, so sorry about my dumb questions.
I installed the img file (succesfully), started the phone with vol-/power, but I got the original recovery menu. Did I miss something?
Alberto96 said:
Just like TWRP, get the "scatter" file from the Stock ROM package, copy it in a folder (new one, it must be empty) where you put the "recovery.img" file together with the "scatter" file, then open SP Flash Tool, select scatter, press download. Done!
Click to expand...
Click to collapse
joco1114 said:
I installed the img file (succesfully), started the phone with vol-/power, but I got the original recovery menu. Did I miss something?
Click to expand...
Click to collapse
Vol + / Power, not Vol - / Power
Yep, Vol+/Power, I miswrote it.
J
Alberto96 said:
Vol + / Power, not Vol - / Power
Click to expand...
Click to collapse
joco1114 said:
Yep, Vol+/Power, I miswrote it.
J
Click to expand...
Click to collapse
Uhm ok, so you might have missed something. After flashing the device with SP Flash Tool, turn it on with Vol +/Power and go into recovery mode. If the device boots to the OS before you get into TWRP, then it will be overwritten losing the work you have done before.
TWRP Recovery by jemmini.
All thanks to him!
Mirror - Google Drive
Scatter file - here (need to unzip)
Drivers, SPFT, SN Writer - here
If I start the phone with vol+/power, I got 3 menu in very small font size. The first is Recovery. After that I got an open android icon (recovery) and "No command." title (or somthing similar). If I press vol+/power for a short time, the original recovery appear. Maybe everything is OK, but I press wrong buttons. There is no CTR. Trying TWRP...
Edit: TWRP is working! Thank you!
joco1114 said:
Edit: TWRP is working! Thank you!
Click to expand...
Click to collapse
U're wellcome )
Flash at your own risk.
Click to expand...
Click to collapse
Custom Recovery
Instructions:
1. First of all download the required files here.
BLU Vivo 6 users please download below attached Scatter File and use this instead of those available in zip.
2. Install all required drivers.
3. Extract All Zips.
4. Run the "SP Flash Tool" as admin (Right Click on the file and click on run as admin)
5. Select "Scatter Loader" from the provided zip, and check that only recovery must be selected.
6. Select "Download Only".
7. Power off the cell phone but don't attach with data cable at this stage.
8. Now click on "Download" and press volume down button and attach cell phone.
9. Wait till flash. You are done.
In case you got scatter file error download the ROM attached and flash it by selecting Firmware update in flash tool.
Root & Encryption Issue
1. Download the Magisk Root files from here.
2. Copy the files in Memory card and not into Internal Storage
3. Boot into "Recovery" by 'Turning Off" the cell phone, now press "Volume Up" and press "Power Button", it will show three options, select "Recovery" by pressing ":Volume Up" and select it by pressing "Volume Down".
4. Swipe to allow modifications.
5. When you first boot into recovery it will ask you for the password, press "Cancel" button and install "Magisk Root", after that press "Wipe" and select "Factory Reset" and then "Wipe Data".
6. Now flash Magisk from memory card. You can select it from "select storage" button and select memory card. otherwise memory card will not be accessible from other menu.
7. Now reboot your cell phone.
8. Enjoy.
Gionee S6 Pro Stock ROM
Gionee S6 Pro Stock ROM
Click to expand...
Click to collapse
In Case You Messed Up
Z14 Pure Stock ROM.
Click to expand...
Click to collapse
Hit Like if it helped you.
Credits:
AlexZap
qwerfaseeh said:
Coming Soon (May be at the end of this week, after some more tests)
Click to expand...
Click to collapse
plz help to root q mobile S 4
@Muzammil mushtaq
Recovery TWRP
Info how to flash
One time that recovery is enabeld copy in the device the ZIP file for recovery for SuperSU and busybox and install in this order (first SuperSU than busybox).
SuperSU 2.78SR1
Busybox ARM
@qwerfaseeh
Pelase add all infos in your first post.
I will post also a soon as the boot unlocked.
Muzammil mushtaq said:
plz help to root q mobile S 4
Click to expand...
Click to collapse
Dear as i don't have S4 so i am unable to test any root for you please dont follow this post this is not for S4 it's only for Z14 but i am searching for you and plz try Kingroot
qwerfaseeh said:
Dear as i don't have S4 so i am unable to test any root for you please dont follow this post this is not for S4 it's only for Z14 but i am searching for you and plz try Kingroot
Click to expand...
Click to collapse
king root not working bro
Sorry bro but in this case I am unable to help you
is there any chance we can flash gionee s6 pro rom on qmobile z14 ?
---------- Post added at 05:38 PM ---------- Previous post was at 05:28 PM ----------
bovirus said:
@Muzammil mushtaq
Recovery TWRP
Info how to flash
One time that recovery is enabeld copy in the device the ZIP file for recovery for SuperSU and busybox and install in this order (first SuperSU than busybox).
SuperSU 2.78SR1
Busybox ARM
@qwerfaseeh
Pelase add all infos in your first post.
I will post also a soon as the boot unlocked.
Click to expand...
Click to collapse
do we need to unlock boot loader first to flash custom recovery ???
if yes then how ?
@cool2cool
boot loader unlocked is not necessary to flash the recovery,.
boot unlocked enable more root option.
bovirus said:
@cool2cool
boot loader unlocked is not necessary to flash the recovery,.
boot unlocked enable more root option.
Click to expand...
Click to collapse
can we flash gionee s6 pro rom on this qmobile z14 ?
qwerfaseeh said:
Custom Recovery
Instructions:
1. First of all download the required files here.
2. Install all required drivers.
3. Extract All Zips.
4. Run the "SP Flash Tool" as admin (Right Click on the file and click on run as admin)
5. Select "Scatter Loader" from the provided zip, and check that only recovery must be selected.
6. Select "Download Only".
7. Power off the cell phone but don't attach with data cable at this stage.
8. Now click on "Download" and press volume down button and attach cell phone.
9. Wait till flash. You are done.
Root & Encryption Issue
1. Download the root files from here.
2. Boot into "Recovery" by 'Turn Off" the cell phone, now press "Volume Up" and press "Power Button", it will show three options, select "Recovery" by pressing ":Volume Up" and select it by pressing "Volume Down".
3. Swipe to allow modifications.
4. When you first boot into recovery it will ask you for the password, press "Cancel" button and install "Root", after that press "Wipe" and select "Factory Reset" and then "Wipe Data".
5. Now reboot your cell phone.
6. Enjoy.
Hit Like if it helped you.
Credits:
AlexZap, bovirus
Click to expand...
Click to collapse
any one tried this method yet ??
bovirus said:
@cool2cool
boot loader unlocked is not necessary to flash the recovery,.
boot unlocked enable more root option.
Click to expand...
Click to collapse
i cant find drivers for z14. can anyone help.
mtp driver when usb debugging is enable
@cool2cool
The driver for Z14 are the standard USB ADB driver.
bovirus said:
@cool2cool
The driver for Z14 are the standard USB ADB driver.
Click to expand...
Click to collapse
when i plug my mobile on debugging mode its shows MTP as unknown device and is not accepting drivers any have tried google, universal, Samsung, htc, mtk. none of them r working.
don't know why all other mobiles are working perfectly on adb.
and the adb part is displaying under Samsung android phone
if i reboot into fastboot mode. that is not working aswell. same driver problem
its connecting normally when usb debugging is disabled
cool2cool said:
any one tried this method yet ??
Click to expand...
Click to collapse
I am using it and its working fine then i posted it on XDA
cool2cool said:
i cant find drivers for z14. can anyone help.
mtp driver when usb debugging is enable
Click to expand...
Click to collapse
Drivers are already added in cell phone just connect it to driver installation mode after connection with pc
cool2cool said:
if i reboot into fastboot mode. that is not working aswell. same driver problem
Click to expand...
Click to collapse
Install the drivers included in cell phone then restart pc after that connect cell phone then open device menu right click on it click on update driver then manually then click next then all devices then there will be two option select USB MTP Device and ok all done
qwerfaseeh said:
Install the drivers included in cell phone then restart pc after that connect cell phone then open device menu right click on it click on update driver then manually then click next then all devices then there will be two option select USB MTP Device and ok all done
Click to expand...
Click to collapse
still not working.
i will try this on another pc and report.
---------- Post added at 05:50 PM ---------- Previous post was at 05:48 PM ----------
qwerfaseeh said:
I am using it and its working fine then i posted it on XDA
Click to expand...
Click to collapse
ok.
as soon as i'll resolve the driver problem, i will try it as well.
one more question have you tried install gionee s6 pro official rom on qmobile Z14
cool2cool said:
still not working.
i will try this on another pc and report.
---------- Post added at 05:50 PM ---------- Previous post was at 05:48 PM ----------
ok.
as soon as i'll resolve the driver problem, i will try it as well.
one more question have you tried install gionee s6 pro official rom on qmobile Z14
Click to expand...
Click to collapse
No as i haven't found it on Internet and there is also a difference of internal storage as gionee is 64gb and z14 is 32gb
Guide for rooting and Twrp installation for Zenfone max ZC550KL 615 MSM 8939 :
Warning: Rooting a device automatically voids the warranty. We assume you know what you are doing and we shall not take any responsibility if your device blows up in your face. Be warned.
FILES NEEDED
DRIVERS\TOOLS
a. adb setup; http://www.mediafire.com/file/jsbx6isfpgle319/adb-setup-1.4.3.exe
b. Android usb drivers ;http://www.mediafire.com/file/57fzehmcfqk0y7t/ASUS_Android_USB_drivers_for_Windows_20150212.zip
c.minimal adb and fastboot : http://www.mediafire.com/file/0h36wb7e8aoimvb/minimal_adb_fastboot_v1.3.1_setup.exe
d. Asus bootloader unlock tool for 8939 device : http://dlcdnet.asus.com/pub/ASUS/Ze...513.74708998.1502054577-2083321676.1502054577
TWRP\ROOT FILES
e. custom recovery image file (Twrp) :
https://www.mediafire.com/file/1kyk0q3b99kcrue/Twrp_3.0.2.img
f. SuperSU file (root) : http://www.mediafire.com/file/dchiph3qkml3u8g/PRO-SuperSU-v2.67.zip
STEP BY STEP GUIDE
1. Download and install adb and Android usb drivers if you don't have them already installed, otherwise, you can skip
2. Download and install minimal adb and fastboot and put icon on desktop
3. Download the Asus bootloader unlock tool .apk file to your device and install like an application in order to unlock bootloader(follow on-screen messages)
4. Boot device into CSC MODE(fastboot\bootloader) and connect to PC via usb cable. (To boot into CSC MODE , press and HOLD "volume up key+power key")
5. open minmal adb and fastboot and enter the following commands:
Code:
[COLOR="Red"]fastboot devices[/COLOR]
hit enter on keyboard and the serial number of your device SHOULD show in minimal adb window, if it does'nt then you've not installed your Android usb drivers correctly !
Code:
[COLOR="Red"]fastboot flash recovery[/COLOR]
after this command press the SPACE KEY ON KEYBOARD AND DRAG THE "CUSTOM RECOVERY IMAGE FILE TO THE MINIMAL ADB WINDOW then hit the enter key on your keyboard and Twrp will be flashed .
IMPORTANT !!
After flashing the TWRP file, you should boot directly into recovery by holding VOLUME DOWN+POWER BUTTON do not allow device to boot into home screen at first boot, otherwise stock recovery will be restored !!!
6. After booting into TWRP , FLASH THE ROOT FILE IMMEDIATELY !
WARNING !
if you don't flash the root file once in twrp, you might encounter a bootloop!
some users report a password prompt while in Twrp, just press "cancel" then go to twrp home screen , WIPE-FORMAT DATA, after formatting data , go back to twrp home screen -REBOOT-RECOVERY , after that flash the root file (make sure your root file is on an external sd card .
Just followed instructions word by word and successfully rooted my Asus Max SD 615 !
Thanks !:good:
Plez upload video..
Please upload video for how to root,twrp and adb installing..because i m a android beginner.
Nandha2335 said:
Please upload video for how to root,twrp and adb installing..because i m a android beginner.
Click to expand...
Click to collapse
Well i guess if you follow it step by step there won't be any problem.If you get stuck at some point just comment here.And installing adb is just like the normal installation of any setup files in windows.Regarding the flashing of twrp there is nothing much to do than the steps mentioned above.If you still need a video go for this.https://youtu.be/kmq2Eyzl3wA NOTE:This video makes use of files for the sd410 model,so don't use the files in that video.Get the files from this post.This video can make you familiarize the process,but steps mentioned here is slightly different.
Nandha
Any problem doing this method????
Plez upload custom rom for ZenFone max sd615 model..
Nandha
Thank u so much bro ..i m following as per u r procedure now my mobile was rooted ...
Nandha2335 said:
Any problem doing this method????
Plez upload custom rom for ZenFone max sd615 model..
Click to expand...
Click to collapse
There aren't any custom roms available till now.Try using xposed modules for improved functionality(serves the purpose of custom rom to great extent).
Abhishek P G said:
There aren't any custom roms available till now.Try using xposed modules for improved functionality(serves the purpose of custom rom to great extent).
Click to expand...
Click to collapse
Actually, there's MIUI 8 available, but its in this Russian thread http://4pda.ru/forum/index.php?showtopic=726975&st=9000#entry62639193
jide1 said:
Actually, there's MIUI 8 available, but its in this Russian thread http://4pda.ru/forum/index.php?showtopic=726975&st=9000#entry62639193
Click to expand...
Click to collapse
Miui 8 rom properly working or not
---------- Post added at 04:29 PM ---------- Previous post was at 04:27 PM ----------
Abhishek P G said:
There aren't any custom roms available till now.Try using xposed modules for improved functionality(serves the purpose of custom rom to great extent).
Click to expand...
Click to collapse
Bro how to change notification panel ..and status bar
Nandha2335 said:
Miui 8 rom properly working or not
don't ask me, i didn't post any rom here, ask him https://forum.xda-developers.com/showthread.php?p=73339833
Click to expand...
Click to collapse
Nandha2335 said:
Miui 8 rom properly working or not
---------- Post added at 04:29 PM ---------- Previous post was at 04:27 PM ----------
Bro how to change notification panel ..and status bar
Click to expand...
Click to collapse
Try using gravity box after installing xposed framework.There a lot of graphical tweaks in gravity box.
Internal Storage Files Missing
After I flashed TWRP and then entered it, it asked for a password to decrypt my storage. I didnt set any password for my phone so I pressed cancel after which came the TWRP menu. But once I selected the install option so as to flash the supersu file, I was unable to find my zip file in it. When I searched for solution, they said it was because my storage is encryted that I was'nt able to acces the data. They adviced to format data through wipe option in TWRP. But still no use. And to add to the problem, when I tried to reboot into system, I was left with a black screen and couln't get to the homescreen.
Please consider my problem and hoping for your fast reply.
kiranrajr said:
After I flashed TWRP and then entered it, it asked for a password to decrypt my storage. I didnt set any password for my phone so I pressed cancel after which came the TWRP menu. But once I selected the install option so as to flash the supersu file, I was unable to find my zip file in it. When I searched for solution, they said it was because my storage is encryted that I was'nt able to acces the data. They adviced to format data through wipe option in TWRP. But still no use. And to add to the problem, when I tried to reboot into system, I was left with a black screen and couln't get to the homescreen.
Please consider my problem and hoping for your fast reply.
Click to expand...
Click to collapse
Boot back into twrp home screen - WIPE- FORMAT DATA , after that, also from twrp , REBOOT-RECOVERY, after that, go ahead and flash the root file and then try to boot into home screen.
Place the root file on an external sd card.
jide1 said:
Boot back into twrp home screen - WIPE- FORMAT DATA , after that, also from twrp , REBOOT-RECOVERY, after that, go ahead and flash the root file and then try to boot into home screen.
Click to expand...
Click to collapse
Thank for your fast reply. By following your steps, I was successful in rooting the phone but when rebooting back to home screen, the black screen's still there.
kiranrajr said:
After I flashed TWRP and then entered it, it asked for a password to decrypt my storage. I didnt set any password for my phone so I pressed cancel after which came the TWRP menu. But once I selected the install option so as to flash the supersu file, I was unable to find my zip file in it. When I searched for solution, they said it was because my storage is encryted that I was'nt able to acces the data. They adviced to format data through wipe option in TWRP. But still no use. And to add to the problem, when I tried to reboot into system, I was left with a black screen and couln't get to the homescreen.
Please consider my problem and hoping for your fast reply.
Click to expand...
Click to collapse
I guess you have copied the super su file to external sd card.Formatting data as mentioned by jide1 did remove the encryption for me.If it doesn't work do advanced wipe with only the data,cache and dalvik cache boxes checked.Note:don't check any other box.Then reboot into twrp.Go to mount in twrp and see that your external sd is mounted.Now access the external sd card in install option and you will find the files of super su.
How to get into twrp recovery?
There is problem after flashing when i press volume down+power button its restarts twrp recovery got lost
6goyal said:
There is problem after flashing when i press volume down+power button its restarts twrp recovery got lost
Click to expand...
Click to collapse
Flash twrp again ,disconnect usb cable from pc, then press and HOLD "volume down" AND "power button" when device vibrates, RELEASE "power button" WHILE still holding "volume down" , that should do the job.
Need stock boot.img
I require the stock boot.img so if anyone is kind enough to upload it, ill be greatful. Or if anyone knows how to extract it from the raw image, that'd also be appreciated.
Volker802 said:
I require the stock boot.img so if anyone is kind enough to upload it, ill be greatful. Or if anyone knows how to extract it from the raw image, that'd also be appreciated.
Click to expand...
Click to collapse
Download the official firmware from Asus website and unpack the zip file, and you'll see the boot.img file there.
Hi XDA. Good Day. I really need your help. I used TWRP and accidentally wipe all the partitions like Dalvik Cache, Cache, Data, Internal Storage, System, Cust and External Storage and after that I got no OS installed. Any idea how to fix this one?
Got any Solution?
usman161 said:
Hi XDA. Good Day. I really need your help. I used TWRP and accidentally wipe all the partitions like Dalvik Cache, Cache, Data, Internal Storage, System, Cust and External Storage and after that I got no OS installed. Any idea how to fix this one?
Click to expand...
Click to collapse
Hello there! Did you get any solution? If yes, then OK. If NO, then I could help you..
Reply If you got it...
Abdul Rehman: said:
Hello there! Did you get any solution? If yes, then OK. If NO, then I could help you..
Reply If you got it...
Click to expand...
Click to collapse
Hi I have the same issues, would you please help me? I would really appreciate it
OK, Let's see,
questionxda said:
Hi I have the same issues, would you please help me? I would really appreciate it
Click to expand...
Click to collapse
So Please tell me what issues are you facing?
---------- Post added at 12:40 AM ---------- Previous post was at 12:15 AM ----------
Abdul Rehman: said:
So Please tell me what issues are you facing?
Click to expand...
Click to collapse
Are you able to enter into fastboot mode?
Abdul Rehman: said:
So Please tell me what issues are you facing?
---------- Post added at 12:40 AM ---------- Previous post was at 12:15 AM ----------
Are you able to enter into fastboot mode?
Click to expand...
Click to collapse
Im facing boot loops, I wanted to install lineage os but my device was not supported, I accidentaly deleted all the memory through twrp, the phone have unlocked bootloader and it can get into fastboot without issues, the adb/fastboot on pc it detects the phone. The one thing which I was unable to do was to get into factory update via holding vol up down and power button
I found the stock firmware rom for my phone here :
https://huaweidl.com/download/honor-4c/chm-u01/
hope it can work
questionxda said:
Im facing boot loops, I wanted to install lineage os but my device was not supported, I accidentaly deleted all the memory through twrp, the phone have unlocked bootloader and it can get into fastboot without issues, the adb/fastboot on pc it detects the phone. The one thing which I was unable to do was to get into factory update via holding vol up down and power button
Click to expand...
Click to collapse
You can't go to factory update like above until you flash "stock recovery.img"
Do you have the file named " stock.img " ??
---------- Post added at 12:55 AM ---------- Previous post was at 12:51 AM ----------
Abdul Rehman: said:
You can't go to factory update like above until you flash "stock recovery.img"
Do you have the file named " stock.img " ??
Click to expand...
Click to collapse
You'll have to flash the official stock recovery.img first
and then you'll be able to install Official Firmware or "Update.app" on your mobile..
Abdul Rehman: said:
You can't go to factory update like above until you flash "stock recovery.img"
Do you have the file named " stock.img " ??
---------- Post added at 12:55 AM ---------- Previous post was at 12:51 AM ----------
You'll have to flash the official stock recovery.img first
and then you'll be able to install Official Firmware or "Update.app" on your mobile..
Click to expand...
Click to collapse
unfortunately I dont have a file called like that, where can I get one? would you please walk me through the process of how to install it? I would be very thankful if that will be possible, I think this tutorial will help lots of other people too which is a good thing
can the file you mentioned be somewhere around these files, https://romfirmware.com/2017/07/29/firmware-update-huawei-honor-4c-chm-u01/
This is what comes up when I searched for stockrecovery img
I also found this link
https://uptoandroid.com/huawei-honor-4c-restore-stock-recovery/
but previous os installed was android 6 marshmallow + emui 4, Im not sure which file to dowload and if it would work since they are mentioning emui 3 and android 5
questionxda said:
unfortunately I dont have a file called like that, where can I get one? would you please walk me through the process of how to install it? I would be very thankful if that will be possible, I think this tutorial will help lots of other people too which is a good thing
Click to expand...
Click to collapse
You can download this file from here (35.4 MB)
https://mega.nz/#!M9slkCZC!d2tQsU8qPxdKMiaTbi6UKMndLZ-dXzhi5U6A6df-7AE
or from my Google Drive:
https://drive.google.com/file/d/15psv3zRWoL_1yNF7NqzlLKfxa5SKJ__B/view?usp=sharing
Abdul Rehman: said:
You can download this file from here (35.4 MB)
https://mega.nz/#!M9slkCZC!d2tQsU8qPxdKMiaTbi6UKMndLZ-dXzhi5U6A6df-7AE
or from my Google Drive:
https://drive.google.com/file/d/15psv3zRWoL_1yNF7NqzlLKfxa5SKJ__B/view?usp=sharing
Click to expand...
Click to collapse
I flashed it the same way as I was doing twrp, copied into adb folder first then shift +right click and open cmd and then I checked fastboot devices, then fastboot flash recovery recovery.img
What to do now sir? hope I did not messed up something
Download the file and paste it into root of your ADB folder (where you've placed adb.exe file)
1. Now Hold Shift and Right Click (on empty area) and choose open command window here.
2. (On your mobile) Enter into fastboot mode by pressing Volume Down key+Power Key together. (while mobile connected to computer)
3. Now in command prompt: type: fastboot devices to check device connected or not (optional)
4. Now Type: fastboot flash recovery stock.img OR recovery.img (whatever the name of file you downloaded) and hit enter.
5. Flashing will start and done in a few seconds.
6. When it show ok OR Finished, you are done.
Now your phone is in stock recovery mode...
---------- Post added at 01:34 AM ---------- Previous post was at 01:32 AM ----------
questionxda said:
I flashed it the same way as I was doing twrp, copied into adb folder first then shift +right click and open cmd and then I checked fastboot devices, then fastboot flash recovery recovery.img
What to do now sir? hope I did not messed up something
Click to expand...
Click to collapse
was it flashed completely?
Abdul Rehman: said:
Download the file and paste it into root of your ADB folder (where you've placed adb.exe file)
1. Now Hold Shift and Right Click (on empty area) and choose open command window here.
2. (On your mobile) Enter into fastboot mode by pressing Volume Down key+Power Key together. (while mobile connected to computer)
3. Now in command prompt: type: fastboot devices to check device connected or not (optional)
4. Now Type: fastboot flash recovery stock.img OR recovery.img (whatever the name of file you downloaded) and hit enter.
5. Flashing will start and done in a few seconds.
6. When it show ok OR Finished, you are done.
Now your phone is in stock recovery mode...
---------- Post added at 01:34 AM ---------- Previous post was at 01:32 AM ----------
was it flashed completely?
Click to expand...
Click to collapse
first time it failed because of typo, then when I wrote the command again it went through it showed message okay, please how to proceed from here?
OK..
So, Do you have any Official Firmware (named Update.app) in any zip file???
---------- Post added at 02:01 AM ---------- Previous post was at 01:39 AM ----------
Abdul Rehman: said:
OK..
So, Do you have any Official Firmware (named Update.app) in any zip file???
Click to expand...
Click to collapse
If no, then you can download from the official website of Huawei.
If yes, then proceed to following:
Extract the zip file containing "dload\UPDATE.APP" file
Attach SD card to the Computer. Copy the "dload" folder (containing file ) and paste it in the root of SD Card.
Insert SD card into the mobile.
Enter into recovery mode by holding volume and power keys.
Now It will automatically detect the firmware file and begin flashing.
Let it complete and You are Done...
Abdul Rehman: said:
OK..
So, Do you have any Official Firmware (named Update.app) in any zip file???
---------- Post added at 02:01 AM ---------- Previous post was at 01:39 AM ----------
If no, then you can download from the official website of Huawei.
If yes, then proceed to following:
Extract the zip file containing "dload\UPDATE.APP" file
Attach SD card to the Computer. Copy the "dload" folder (containing file ) and paste it in the root of SD Card.
Insert SD card into the mobile.
Enter into recovery mode by holding volume and power keys.
Now It will automatically detect the firmware file and begin flashing.
Let it complete and You are Done...
Click to expand...
Click to collapse
I did so I formated my sd card and then extracted the zip with dload folder into the sd card. After that I removed the sd card and put it back into the phone and then I pushed vol up and vol down and then pushed the power button. after a while the honor screen turned on and after that the recovery emui utility installed the android and that was it! Thank you for helping me to unbrick this device I really appreciate it I wanted it to flash it originally with lineage only because of privacy concerns, would you give me tips on how to make the phone more privacy related? so it will spy on me lesser? I mean is it possible to get near lineage os in terms of privacy?
questionxda said:
I did so I formated my sd card and then extracted the zip with dload folder into the sd card. After that I removed the sd card and put it back into the phone and then I pushed vol up and vol down and then pushed the power button. after a while the honor screen turned on and after that the recovery emui utility installed the android and that was it! Thank you for helping me to unbrick this device I really appreciate it I wanted it to flash it originally with lineage only because of privacy concerns, would you give me tips on how to make the phone more privacy related? so it will spy on me lesser? I mean is it possible to get near lineage os in terms of privacy?
Click to expand...
Click to collapse
I'm Sorry! I do not know much about Lineage OS. Once, I tried to flash Lineage OS but got same problem as you.
Later on, I found a complete way, But couldn't do myself due to lack of time. However, Here is the link for step by step guide.
>>>Start Reading From Post # 14 till End of Thread:
https://forum.xda-developers.com/honor-4c/help/honor-4c-stuck-logo-to-recovery-t3702303/page2
Check the Following Link for collection of custom firmwares for Honor 4c
https://forum.xda-developers.com/honor-4c/how-to/installing-p8lite-roms-honor-4c-t3617942
***** One last tip: You should create a backup of your Mobile Data using TWRP recovery.
It will make a backup (of size of about 4.2 GB) of Your Whole "Data and OS" and store it in SD Card (or in your computer.)
Later, whenever you stuck in any problem like before, you can simply restore your phone, it will be restored to the same condition. (along with user data)
Read, apply and say thanks to XDA Forum If above links help you. However keep on searching within forum and over the internet for further information... :good:
Abdul Rehman: said:
I'm Sorry! I do not know much about Lineage OS. Once, I tried to flash Lineage OS but got same problem as you.
Later on, I found a complete way, But couldn't do myself due to lack of time. However, Here is the link for step by step guide.
>>>Start Reading From Post # 14 till End of Thread:
https://forum.xda-developers.com/honor-4c/help/honor-4c-stuck-logo-to-recovery-t3702303/page2
Check the Following Link for collection of custom firmwares for Honor 4c
https://forum.xda-developers.com/honor-4c/how-to/installing-p8lite-roms-honor-4c-t3617942
***** One last tip: You should create a backup of your Mobile Data using TWRP recovery.
It will make a backup (of size of about 4.2 GB) of Your Whole "Data and OS" and store it in SD Card (or in your computer.)
Later, whenever you stuck in any problem like before, you can simply restore your phone, it will be restored to the same condition. (along with user data)
Read, apply and say thanks to XDA Forum If above links help you. However keep on searching within forum and over the internet for further information... :good:
Click to expand...
Click to collapse
Hi thank you very much for all the tips and advice I really appreciate that place and people like this exist, may you have a beautiful day
Hi Sir, My Huawei G Play Mini ( CHC-U01 ) is in Boot-Loop. how do i fix it?
i tired Fastboot with all firmwares and i read all the guides but still no fix.