Hi,
I recently bought a MID Vogue Android 7" tablet machine to experiment with. One of the reasons I bought this particular model was that it was advertised as having Android 2.2 installed, and when I go to About Device it does indeed show that v2.2 is installed (kernel v2.6.25). However, it doesn't operate like a v2.2 machine -- I can't install apps on the SD card, and Android Market won't allow me to download most v2.2-aware apps.
Have I made a newbie mistake and not tweaked my settings properly to use v2.2 features, or do I need to root my machine and do something more in-depth to correct this problem (assuming it can be corrected!)? Any ideas are appreciated.
Thanks very much,
B
Hello there,
I have a few questions and googling, gives me millions of results that are not helpful in regards to what I am looking for,
I have googled "rom dump android unknown devices" and etc etc and also looked at the kitchen thread but I am not quite satisfied with it, as it uses windows also linux is present there as well.
I am currently running eclipse with android SDK and also virtualisation is working fine, but my main question is.
What's the easies way to dump a rom of an unknown device, (can it be done in linux, or only windows?).
How can I inject some fancy code into the kernel for these unknown devices?
And what software can I use for flashing those unknown devices.
I have used the search button on here, have looked at android tablet zone and and android tablets.
But there are no helpful answers although plenty to read, but again simple how to dump a rom of a unknown device, customise kernel and then flash it again?
Thanks
Jay
I am interested in buying a new android and would like to run the OS from a few android phones in a virtual machine. Everything is installed, Android SDK, eclipse, Genymotion, as well. After loading one of the VMs that are already available, what interested me was how could I load a particular kernal for a phone that I would like to buy.
For example, I downloaded the rom for the ZTE Open C (firefox OS). How would I go about converting this to a VDI or OVA? Not sure even which I would convert it to. Could somebody even possibly point me to the correct faq, did some searching but not really sure what to search for so only coming up with how to root your phone.
Thank You
Hi everybody,
not sure whether I can post this within the clone phone threads since I do not know the processor nor the manufacturer.
Phone is a pseudo iPhone which runs some kind of Android which is disguised as iOS (really bad quality).
Unfortunately this Android is really instable and phone does not work reliably.
Now I am trying to find out whether there might be another Android version which I could flash instead. Already identified Needrom as possible source but need the real device manufacturer and processor before.
Any idea how I could proceed here? Just still trying to avoid to connect to PlayStore on this phone since the Chinese ones are known for their spyware.
Recoveryis accessible.
From backside: A1660FCCID;BCG-E3085AIC59C-E3085A
From About: Modell: MNRJ2CH/A
Which other information do I need to provide/identify the phone and how do I get it?
Any help highly appreciated.
Bye
First things I identified are that it seems to be a Lenovo using MT65xx - at least this was shown during driver installation when phone was connected to Win PC.
After connecting to Win10 Laptop YunOS ACB Interface has been installed. MTKTools tells about the already known fake and says its an MT6582.
So how can I provide a suitable stock ROM onto it?
Renth said:
First things I identified are that it seems to be a Lenovo using MT65xx - at least this was shown during driver installation when phone was connected to Win PC.
After connecting to Win10 Laptop YunOS ACB Interface has been installed. MTKTools tells about the already known fake and says its an MT6582.
So how can I provide a suitable stock ROM onto it?
Click to expand...
Click to collapse
Hey Renth,
I am afraid I got one of those too. It looks like an iphone with 250GB memory, but in eality it only has less than 50 MB.
Model: A1660 FCCID BCG E3085A IC579C E3085A
I a wondering also if I can wipe out whatever it has installed.
Sorry for the late reply. I also raised that topic within China Devices Forum back then. There I documented all my activities (hopefully did not forget anything).
Do not know whether cross referencing is allowed, so just send me a PM then I can provide you the link. Alternativly you can ask google for "How to identify real device (Clone phone)?" and then follow the link with the same topic at Chine Devices forum.
Hi all! Android noob looking for suggestions.
Manufacturer: Mediawave PC (now Techland PC)
Hardware Model: MW22-A32
Current OS: 4.4.4
Chipset: Rockchip RK3288 (supposedly capable of Android 8.1)
Rooted with SuperSU
Purchased this 22" touch display off eBay and wanted to load an app that requires Android 6 or higher. The manufacturer does not offer an update package for this device and indicated what I have was a special build for a single project that is now likely being refreshed and hardware liquidated. Tech Support indicated I needed to simply buy a NEW device that already has the OS updated.
I would like to think we can update to a newer version of OS, but I have no idea where to start. I checked a few online videos, but they seemed to point to pre-packaged OS bundles from tech enthusiasts for specific mass market tablet models.
Is an upgrade like this possible without having device specific files/firmware? If so, can you point me to a guide or walkthrough for how to do this as an Android novice? Thank you!
In order to upgrade existing Android OS as 1st thing of all things you need to find a
1. Custom Recovery
2. Custom ROM
both suitable to the mentioned device.
jwoegerbauer said:
In order to upgrade existing Android OS as 1st thing of all things you need to find a
1. Custom Recovery
2. Custom ROM
both suitable to the mentioned device.
Click to expand...
Click to collapse
Can I create a recovery from the existing image? Is there a utility that will export that?
Look inside here:
[DEV]How to compile TWRP touch recovery
All of TWRP 3.x source is public. You can compile it on your own. This guide isn't going to be a step-by-step, word-for-word type of guide. If you're not familiar with basic Linux commands and/or building in AOSP then you probably won't be...
forum.xda-developers.com
jwoegerbauer said:
Look inside here:
[DEV]How to compile TWRP touch recovery
All of TWRP 3.x source is public. You can compile it on your own. This guide isn't going to be a step-by-step, word-for-word type of guide. If you're not familiar with basic Linux commands and/or building in AOSP then you probably won't be...
forum.xda-developers.com
Click to expand...
Click to collapse
Using the 'Official TWRP App', I created a copy of both the boot and recovery image.
For the next step, if the device manufacturer will not supply an updated ROM, can you use the hardware profile help find a close custom rom that may work here? if so, do you have any suggestions on next steps? I installed the 'Droid Info' app to view hardware info, but it was not as detailed as I had hoped.
Can't answer your questions because I never compiled TWRP at my own.
Were you ever able to update this device? I have one that i want to update as well.
I also bought one of these off of ebay and would like to know if you figure out how to upgrade to Android 8.1.
$175 - https://www.ebay.com/itm/304190850043
Sellers other items:
Jjsurplus1090 Reviews - eBay Store Seller Profile
Jjsurplus1090 is a seller on eBay and has received feedback from more than one thousand consumers and has a positive feedback rate of 98.8%.
www.findthisbest.com
$998? - https://www.neweggbusiness.com/product/product.aspx?item=9siv2hu9829613
Manufacturer Contact Info: http://techlandpc.com - 510-490-6768 - [email protected]
MediaWave PC
MediaWave PC. 52 likes. Embedded And Digital Signage Hardware Specialist
www.facebook.com
MW22-A32 | Techland PC
http://techland.webandapp.design/wp-content/uploads/2017/09/MW22-A32.pdf
Side question: Does anyone know if there is a webcam or camera that will work with this device?
https://datasheet.lcsc.com/szlcsc/Rockchip-RK3288_C191247.pdf
Rockchip RK3288 model number AIO MW22-A32
I sent an email to [email protected] and will report back once I get a response:
I purchased one of these recently and the OS is Android 4.4.4
Do you know where I can download the ROM, Recovery image file?
I believe that I saw that your website stated the OS to be Android 7.1.
Is it supposedly capable of Android 8.1?
<and thank you very much>
Yet another question...
The unit I purchased seems to have only 1GB DRAM?!?
Any way to increase this? Any advice is greatly appreciated!
2015 Rockchip Light Biz OS for Android Laptops/Desktops, UI for productivity on RK3288 and RK3368
Download and Install Lineage OS 17.1(Android 10) for Google Rockchip RK3288
How To Install Lineage OS 17.1 - Google Rockchip RK3288 Chromebook RK3288 Chrome OS Device jerry cheets - TweakDroid
Complete Guide [With Download Link] to Install Lineage OS 17.1 In Google Rockchip RK3288 Chromebook RK3288 Chrome OS Device jerry cheets. Let's Customize Your Google Rockchip RK3288 Chromebook RK3288 Chrome OS Device jerry cheets With Latest Lineage OS 17.1.
tweakdroid.com
Custom ROMs For Google Rockchip RK3288
List of Custom ROMs for Google Rockchip RK3288 Chromebook RK3288 Chrome OS Device jerry cheets - Download & Install Guide - TweakDroid
Here is the available Custom ROMs list for your Google Rockchip RK3288 Chromebook RK3288 Chrome OS Device jerry cheets & Custom ROM Installation Guide for Google Rockchip RK3288 Chromebook RK3288 Chrome OS Device jerry cheets.
tweakdroid.com
Flash ChromeOS Rockchip RK3288?
How to flash firmware to Rockchip devices in Windows and Linux (2021 Edition)
How to flash firmware to Rockchip devices in Windows and Linux (2021 Edition) - CNX Software
We've written several articles detailing methods to flash firmware to Rockchip devices in Windows or Linux over the years, with tools like RKAndroidTool,
www.cnx-software.com
I called 510-979-8822, asked for customer support, left a voicemail
I reached out via LinkedIN - https://www.linkedin.com/in/brian-goduco-240ab47/
I also sent an email to [email protected] and [email protected]
It looks like their facebook page is dead or gone. This tweet is supposedly a link to one of their device photos:
https://twitter.com/i/web/status/11045078102Their twitter page has not been active since they first joined in March 2010 - https://twitter.com/techlandpc
Firmware Upgrade Guide For RK3188 RK3288 RK3368 Devices
UPD: Rreflashing guide for linux Host PC added. BEFORE START What you need: 1. Image file 2. Host PC (Windows) 3. USB OTG Cable Supported host OS: 1. Windows XP （32/64bit) 2. Windows 7 (32/64bit) 3. Windows 8 (32/64bit) All manipulations I...
forum.xda-developers.com
donclark said:
Firmware Upgrade Guide For RK3188 RK3288 RK3368 Devices
UPD: Rreflashing guide for linux Host PC added. BEFORE START What you need: 1. Image file 2. Host PC (Windows) 3. USB OTG Cable Supported host OS: 1. Windows XP （32/64bit) 2. Windows 7 (32/64bit) 3. Windows 8 (32/64bit) All manipulations I...
forum.xda-developers.com
Click to expand...
Click to collapse
Don - were you successful?
TXdev said:
Don - were you successful?
Click to expand...
Click to collapse
I did not attempt. TechlandPC did respond and said that this model maxed out at 4.4.4. I was not convinced that the updated firmware will work with this device and could not find anyone specifically doing it to this device - and did not want to brick it. I was able to delete some large system apps and free up some space with OAndBackupX (Andorid 4+)- https://f-droid.org/en/packages/dk.jens.backup/
Interested in this aswell.
I know the topic is a few months old but I’m currently looking at possibly purchasing the 22” or 15” in models and wanted to see if there were any further updates? What is everyone using them for? I hope to use them with home assistant and fully kiosk…anyone know if it’s possible? Seems like there is enough interest, maybe we can get this tablet upgraded?
Crazyshakespeare15 said:
I know the topic is a few months old but I’m currently looking at possibly purchasing the 22” or 15” in models and wanted to see if there were any further updates? What is everyone using them for? I hope to use them with home assistant and fully kiosk…anyone know if it’s possible? Seems like there is enough interest, maybe we can get this tablet upgraded?
Click to expand...
Click to collapse
I purchased the 22" for my 83yr mother. I created a desktop stand for her to use it to view her gmail, facebook, etc. Its fairly limited because of the small space on the device, So I found a way to move many of the apps to an external usb. It also does not have a camera - which would have been nice for her to be able to use to make videochats, but I could not get an external usb camera to work (tried 4 different makes/models). I never did attempt to flash and upgrade it.
Oh wow Don…good on you for getting your grandmother up and going with it. I’m a little scared to take the plunge not knowing if it can run what I need…how good is the browser (is the system sluggish?) They two I’m looking at say they have built in cameras (I too was hoping to use it) but I bet it will be a no go :/
Crazyshakespeare15 said:
Oh wow Don…good on you for getting your grandmother up and going with it. I’m a little scared to take the plunge not knowing if it can run what I need…how good is the browser (is the system sluggish?) They two I’m looking at say they have built in cameras (I too was hoping to use it) but I bet it will be a no go :/
Click to expand...
Click to collapse
If it says in the description that it comes with a camera - you may be ok. Mine clearly stated that it did not have a camera.
It is responsive and works well. I did do something to make it sluggish but I do not remember specifically... it may have been that I came very close to maxing out the storage which caused the issue.
The other thing that I was really disappointed in is that it does not have an HDMI in. So I could not push video to it. It does have an HDMI port, but I havent tested if it does push video to another device since I didnt have a need to do that.
It’s good to hear it’s responsive (or was lol) maybe I should just bite the bullet and get it…if I can just get it to run Home assistant it will be golden…if you think of anything else or figure anything out let me know!