Hello there,
I have a few questions and googling, gives me millions of results that are not helpful in regards to what I am looking for,
I have googled "rom dump android unknown devices" and etc etc and also looked at the kitchen thread but I am not quite satisfied with it, as it uses windows also linux is present there as well.
I am currently running eclipse with android SDK and also virtualisation is working fine, but my main question is.
What's the easies way to dump a rom of an unknown device, (can it be done in linux, or only windows?).
How can I inject some fancy code into the kernel for these unknown devices?
And what software can I use for flashing those unknown devices.
I have used the search button on here, have looked at android tablet zone and and android tablets.
But there are no helpful answers although plenty to read, but again simple how to dump a rom of a unknown device, customise kernel and then flash it again?
Thanks
Jay
Related
I have been reading/doing some tablet/phone hacking (rooting, install new ROM with ADB etc). I've been always curious how the custom Kernel is built without the hardware manufacture support. Where do you get the drivers required to build a linux kernel for Xoom? For example, take XOOM. To install new Kernel, you would need the specific drivers for XOOM's WIFI, USB, DISPLAY, CAMERA, Audido etc. These drivers have specific information such as address/configuration etc which are not generic. So how do the Open-Source community obtain those drivers to build the Kernel?
I have been reading about the Android architecture, AOSP, Linux Kernel etc but can't find the answers. I'm an SoC hardware designer. I wrote some lower level drivers, API etc. but have never touch the kernel and above. I'm trying to move out of the hardware into the software space, so I'm looking at this from the bottom up approach.
Sorry if this is a wrong forum to ask this type of question.
Lance
Hi, I have an Android TV device that has Android 2.3 (it's a Chinese device) and I'd like to know if someone can help me adding a driver to it. Let me explain...
I've done some research and found that there is a driver for the DVB-T that I want to add. It's here (cateee.net - linux database):
DVB_MB86A20S
So, my question is basically, it's doable without having to compile Android ? I do have root access to the device, but I don't know how to include the Linux driver to an Android device and ensure it's working....
Thanks.
Hi everyone!
I have this question in mind for a long time now. It gets confirmed every time a company decides to make a new mobile OS. Why is it so damn difficult to first install a mobile OS, but even more, why only people with some special knowledge and dedication can port an OS to a new mobile device?
I mean, on a computer we just have to select if we want i386/x86 or AMD/x86_64 installer what ever computer brand or other hardware we do have while on mobile, we need to have a very specific image for our device. We end up with hundreds if not thousands of images of the same version of the OS.
So my question is, why don't we have this work flow to install a mobile OS:
- Flash a generic image on the device
- Run it
- Auto compile a new kernel on the device itself
- Load generic drivers
- If generic drivers don't work, download specific ones
- Continue with installing other regular software
Technical answers are welcomed.
Thanks,
Dragnucs.
Because.
Building the kernel on the device would take a lot of time and most phones do not have the resources to do so (memory and CPU).
Adding a development environment (compiler, libs, etc.) to the install image would make the install image quite large.
Most manufacturers release incomplete code for their drivers. This makes a complete re-creation of them from source nearly impossible.
There is no repository for 3rd party binary device drivers (probably not "legal" to do so). Mobile phones often have a proprietary system UI framework which is never released as source code. The best you can do is either re-create your own (AOSP, CM, AOKP) or borrow the one from the stock firmware release (Touchwiz, Sense).
If your phone needs a "special" network driver, how are you going to transfer one over during your install if you don't already have one. (classic chicken vs egg scenario)
It is much easier to setup one generic build (on a PC or server), then have custom compile scripts for each device you intend to support. Also a lot easier to debug build issues on a full computer than trying to do so on a phone.
In the PC world, you have manufacturer's that have to release binary drivers to Apple/Microsoft for validation and make binary or source drivers available for Linux. In the mobile world, those processes do not exist.
-Mike
Dragnucs said:
Hi everyone!
I have this question in mind for a long time now. It gets confirmed every time a company decides to make a new mobile OS. Why is it so damn difficult to first install a mobile OS, but even more, why only people with some special knowledge and dedication can port an OS to a new mobile device?
I mean, on a computer we just have to select if we want i386/x86 or AMD/x86_64 installer what ever computer brand or other hardware we do have while on mobile, we need to have a very specific image for our device. We end up with hundreds if not thousands of images of the same version of the OS.
So my question is, why don't we have this work flow to install a mobile OS:
- Flash a generic image on the device
- Run it
- Auto compile a new kernel on the device itself
- Load generic drivers
- If generic drivers don't work, download specific ones
- Continue with installing other regular software
Technical answers are welcomed.
Thanks,
Dragnucs.
Click to expand...
Click to collapse
Thanks buddy. :good:
Dear all,
I'm trying to reconstruct the Andriod on my phone. So far i managed to download source code for Linux core including files like "mount, cp, modprobe,...", however I notices thete are other files in /system/bin like "am, pm, ..." which control the other layer of Android OS. How can I download the source code for these kind of files. Also in framework we have "am.jar" which seems to have direct relation to Java VM. Maybe it is better to also ask how Java VM works on Android. I do not ask about general knowledge because more or less I know how it works. Basicly I need to know which files are related to the process of running Apps on Android and what they do.
Best wishes.
I am interested in buying a new android and would like to run the OS from a few android phones in a virtual machine. Everything is installed, Android SDK, eclipse, Genymotion, as well. After loading one of the VMs that are already available, what interested me was how could I load a particular kernal for a phone that I would like to buy.
For example, I downloaded the rom for the ZTE Open C (firefox OS). How would I go about converting this to a VDI or OVA? Not sure even which I would convert it to. Could somebody even possibly point me to the correct faq, did some searching but not really sure what to search for so only coming up with how to root your phone.
Thank You