Related
Hi guys,
I bought a tablet from the guys over at Allview. The price was decent and the tablet is nice, but the douchy problem is that they did not include the android marketplace. I need it.
The device runs a eclair (android 2.1) update 1. Is there any way to install the marketplace without rooting the device ? and If not, can the device be rooted ? It has no phone capabilities (no sim, no gps, no camera) so I have 0 ideea what tool to use, especially because i really have no ideea what happends when rooting.
The little i got informationwise is that i'd probably need to root it > connect it to pc, use the andorid debugging console to "push" the app into the system folder. Tried to install whatever vendor.apks I could find but since the "host" os was uncertain, it's probably why they could not be installed. Alas, i may be wrong. Can you please help me out ?
if you need more infor google allview or Alldro
Thanks a lot !
ldq said:
Hi guys,
I bought a tablet from the guys over at Allview. The price was decent and the tablet is nice, but the douchy problem is that they did not include the android marketplace. I need it.
The device runs a eclair (android 2.1) update 1. Is there any way to install the marketplace without rooting the device ? and If not, can the device be rooted ? It has no phone capabilities (no sim, no gps, no camera) so I have 0 ideea what tool to use, especially because i really have no ideea what happends when rooting.
The little i got informationwise is that i'd probably need to root it > connect it to pc, use the andorid debugging console to "push" the app into the system folder. Tried to install whatever vendor.apks I could find but since the "host" os was uncertain, it's probably why they could not be installed. Alas, i may be wrong. Can you please help me out ?
if you need more infor google allview or Alldro
Thanks a lot !
Click to expand...
Click to collapse
Here ya go! just download it to your destop, transfer it to you device via usb, or download it to android device and run it from there!
thanks a huge lot !!! I will try this out. if it cannot install it means I will probably have to root the damn thing
thought as much. it won't install. I'm using ES explorer to install it (my device is not rooted yet, as I mentioned before) and no luck.
EDIT 1: Also tried copy=pasting it into the system/app folder. it says android marketplace blablabla copy failed. Is it possible that I am dealing with a NAND lock ?
could be that system is mounted read only.
Do you have root?
nope, not yet. I;m trying to root it as we speak... so far still going through the steps
EDIT: trying this out: http://forum.xda-developers.com/showthread.php?t=858952
so far i got to making the recovery image. for some idiotic reason however, I cannot do adb reboot recovery again ! it tells me error: protocol fault (no status)
my guess is that it doesn't like the recovery folder's name. else i don't get what's wrong ! I am going to rename the folder, and then attempt a second reboot-recovery. see if that works !
EDIT2: did not work. Could it be something else ?
ok i did it ! the problem was I had skipped rooting and forgot to add a few more params after doing the backup... whew ! that was a close call ! ffs !
Omnichron said:
Here ya go! just download it to your destop, transfer it to you device via usb, or download it to android device and run it from there!
Click to expand...
Click to collapse
Hi,
Is there such an app for the phone P2 from Allview?
Thank you in advance,
Poli
You will need to root your device to be able to push the vending apk into the system apps.
1. Root. its essential to do so.
2. Mount system partition r/w > google for adb commands on how to do that and adb in general
3. download the google apps provided above and either unzip and push vending apk to system/apps (not sure about the exact names, you'll have to see for yourself by using Root Explorer) . Restart phone > should work.
So here's how I did it:
Basically, with an Cortex A8 processor, the Maxell C8 tablet seems to be a slightly upgraded Allwinner A10, which is a bit cheaper than the Maxell tablet but then again Maxell really did package theirs nicely in terms of casing. But it's no secret - when you plug in the Maxell C8 with Windows 7 it shows clearly that it's a MID tablet. So essentially, my theory is that this method should work on all similar tablets such as Allwinner A13,A10 etc (although many of those come with preinstalled google play, as China, like me, doesn't give a **** about copyright). For reference, my tablet is running Android 4.0.4
Step 1. Root your tablet.
This took me a few times to figure out but this program called "Android Root Unlock" finally did it for me. You can get it from Source Forge: http://sourceforge.net/projects/androidroot/
Enable USB debugging (settings > developer options > Usb debugging). Then just connect your tablet to your PC via USB, wait until Windows recognizes the device. It should read "MID" in the device manager screen. The unpack the zip file you downloaded above on your Windows machine and run "ICS_Root_Unlocker.bat" it while the tablet is still plugged into USB. A black terminal window will open, just follow the instructions from there. Your tablet will restart - that means it probably worked, don't close the program yet but follow what it says to the end until the terminal window closes. Now you can unplug your device.
Step 2. Install modded Google Play
Now you can go ahead and follow the instructions on xda-developers.com:
http://forum.xda-developers.com/showthread.php?t=1650116
That's it! Google play now works like a charm and I can download stuff directly from Google Play without problems
Here's my full blog post: http://truthtech0.blogspot.com/2013/03/android-maxell-maxtab-c8-tablet-market.html
Thanks for your efforts, I'll give it a try. I was going to try Root_with_Restore_by_Bin4ry, but as you've confirmed it works, I'll use Android Root Unlock.
I think it's running Jelly Bean, it's my dads tablet. I'll see him tomorrow.
profixit said:
Thanks for your efforts, I'll give it a try. I was going to try Root_with_Restore_by_Bin4ry, but as you've confirmed it works, I'll use Android Root Unlock.
I think it's running Jelly Bean, it's my dads tablet. I'll see him tomorrow.
Click to expand...
Click to collapse
Thanks for the tips.
Anyone managed to install either a recovery image or a custom rom on the maxtab?
I've rooted mine but cannot get fastboot to work and unable to load a recovery image. Adb is working OK. Tried clockworkmod but device is unsupported.
gadget19, what happened to yours, why do you need to recover or use custom rom?
profixit said:
gadget19, what happened to yours, why do you need to recover or use custom rom?
Click to expand...
Click to collapse
I tried the google play fix but its not working for me. I wanted to use a custom rom so that I get google play to work correctly and also to try out 4,2 features.
Hi, thank you for your guide.
Unfortunately i'm unable to complete it because when i connect the maxtab c8 to a windows 7 system it doesn't find the MID driver so the root bat doesn't find the device.
Do you have any hint in how to complete the procedure?
Thank you.
Town Annteem
lordtruten said:
Hi, thank you for your guide.
Unfortunately i'm unable to complete it because when i connect the maxtab c8 to a windows 7 system it doesn't find the MID driver so the root bat doesn't find the device.
Do you have any hint in how to complete the procedure?
Thank you.
Click to expand...
Click to collapse
I used the samsung drivers and google naked universal drivers. Adb commands work with them but could never get fastboot cmds to work.
gadgethome said:
I used the samsung drivers and google naked universal drivers. Adb commands work with them but could never get fastboot cmds to work.
Click to expand...
Click to collapse
Thanks for the hint; I was able to execute the bat file but i still have some problems.
The procedure looks like complete but if I open Root Explorer and try to do some changes in \system\app it just tell me that it's in read only mode.
Tried root check pro and it's all red...
superuser installed
sbin/su: permission denied
system/bin/su: no file
system/xbin/su: Setuid attribute present and root user ownership present. Root access is correctly configured for this file! Executing this file can grant root access!
system/xbin/sudo : no exsist
su binary not found or not operating correctly
Tried to run the su file in system/xbin/su as a script on the tablet and via adb without any changes. Checked a bit online but i'm a bit stucked since my other android device (lg p500) was much easier to root.
If you have any idea i't will be very helpful. Thank you.
Ok solved.
To easy root the maxtab c8 (android 4.1) i used the RK29 tab tolkit v1.3: easy and fast.
Now i have problem installing the play store...
I followed the guide but since i don't have any Vending.apk or phonesky.apk in system/app i just copied it without a backup, rebooted but nothing happened.
Need more testing.
Ok play store installed and working.
I didn't use the apk linked in the first post, i had to use this one instead: http://forum.xda-developers.com/showthread.php?t=1934441
The method is the same (copy in system/app, set the permission as rw-r--r-- and then reboot) just use the apk i linked.
Hope this help someone.:victory:
Hi all, what's the best drivers to use for the Maxtab C8
Windows 8. Device manager showing unrecognized MID device
Thanks
profixit
I used PDAnet software for driver instal on XP. Have no idea if it will work for 7 or 8.
Google it, i cant post URL
Finally got everything working.
Used my old Intel x86 XP Pro to root it
Then Google play installer.
Maxtab welcome to the real world.
i'll have a Nandroid backup of the stock rom by tomorrow. if interested PM me
maxell maxtab 8
Hi,
I have a maxtab 8, with recovery loop..
Where can I ask -this machine-, which would not take off the observer?
this forum is the correct place?
I need help figuring out how to root a RCA RCT6077W22 tablet. It has Android Jellybean 4.1.1- v1.0.1, 8GB built in storage, 1GHZ processor, Google apps installed, kernel is [email protected]#132.I'd like to try to root it from the tablet itself if not I'm familiar with SuperOneClick as I've used it for my Samsung Galaxy S 4G before I should it. If it comes to that option I need to be able to use a rooting program on my computer that does not require internet the only internet I am able to use is the libraries. I have a laptop but no charger so my laptop is dead. I'm not a noon when it comes to rooting as I've mentioned I've done it before. Just need help finding a root for this tablet. I appreciate any help I get and thank you. If you need more info feel free to ask. I've also looked at the topic about the 4GB but its not that helpful is why I created my own topic.
deathscreations said:
I need help figuring out how to root a RCA RCT6077W22 tablet. It has Android Jellybean 4.1.1- v1.0.1, 8GB built in storage, 1GHZ processor, Google apps installed, kernel is [email protected]#132.I'd like to try to root it from the tablet itself if not I'm familiar with SuperOneClick as I've used it for my Samsung Galaxy S 4G before I should it. If it comes to that option I need to be able to use a rooting program on my computer that does not require internet the only internet I am able to use is the libraries. I have a laptop but no charger so my laptop is dead. I'm not a noon when it comes to rooting as I've mentioned I've done it before. Just need help finding a root for this tablet. I appreciate any help I get and thank you. If you need more info feel free to ask. I've also looked at the topic about the 4GB but its not that helpful is why I created my own topic.
Click to expand...
Click to collapse
Did u figure out how to root your rca tablet....I have one and I need mine rooted also I can't store any apps on my ad card
Can you give more specifics such as the the model number, what version of android is it running?
Sent from my Nexus 5 using xda app-developers app
I have the rct6378w2 RCA 7' 8GB tablet (4.2.2 JB). (Black Friday 2013 Walmart for $49)
I was able to root it by first installing the pdanet drivers (for adb access). And then using the kingo app, which you can get from http://www.kingoapp.com/.
Its free but closed source. I found it via this youtube video. https://www.youtube.com/watch?v=8MiZtZCqu4k
Worked even with the 1.0.2 update installed (which I have no clue what it did (17MB).
Takenover83 said:
I have the rct6378w2 RCA 7' 8GB tablet (4.2.2 JB). (Black Friday 2013 Walmart for $49)
I was able to root it by first installing the pdanet drivers (for adb access). And then using the kingo app, which you can get from http://www.kingoapp.com/.
Its free but closed source. I found it via this youtube video. https://www.youtube.com/watch?v=8MiZtZCqu4k
Worked even with the 1.0.2 update installed (which I have no clue what it did (17MB).
Click to expand...
Click to collapse
TAHNK YOU Takenover83 you are amazing. I rooted my tablet same model and set up as yours.
frarredo here is the information you were asking about in the picks below..
Please take notice to picture Screenshot_2013-11-29-23-15-32.png running bubble launcher, xposed framework , and xhalofloaingwind, to muliwindows on the tablet and all android phones,
Sorry here is the last pic it did not let me upload
Help
Takenover83 said:
I have the rct6378w2 RCA 7' 8GB tablet (4.2.2 JB). (Black Friday 2013 Walmart for $49)
l]
Worked even with the 1.0.2 update installed (which I have no clue what it did (17MB).
Click to expand...
Click to collapse
I cannot get pdanet to get the drivers. I cant find any drivers anywhere. Pdanet says to click ok after connecting, and it just says no android device found..I think there's an error box too.. I don't know how to fix it. I also have the tablet from the black friday event. Exact same one. Also, I have USB debugging on...
UPDATE: I found out the problem! The support files weren't in the root file I had the .exe in. I just moved the .exe to the same folder with the support files, and now I'm rooted and ready! Thanks!
wy3r5 said:
I cannot get pdanet to get the drivers. I cant find any drivers anywhere. Pdanet says to click ok after connecting, and it just says no android device found..I think there's an error box too.. I don't know how to fix it. I also have the tablet from the black friday event. Exact same one. Also, I have USB debugging on...
UPDATE: I found out the problem! The support files weren't in the root file I had the .exe in. I just moved the .exe to the same folder with the support files, and now I'm rooted and ready! Thanks!
Click to expand...
Click to collapse
how are you turning on usb debugging? I also have this tablet(purchased on black Friday from Walmart like everyone else) and mine doesn't seem to have that option anywhere. in fact, compared to the previous two android products I have, this device seems to lack ALOT of available functions. though I am capable of navigating a recovery menu at boot. but that doesn't do me any good for using pdanet. that seems to be my biggest road block. pdanet wont install because the onl;y way I can allow my device to connect to my pc with adp is using the adp updater in the recovery boot menu.
Desarial said:
how are you turning on usb debugging? I also have this tablet(purchased on black Friday from Walmart like everyone else) and mine doesn't seem to have that option anywhere. in fact, compared to the previous two android products I have, this device seems to lack ALOT of available functions. though I am capable of navigating a recovery menu at boot. but that doesn't do me any good for using pdanet. that seems to be my biggest road block. pdanet wont install because the onl;y way I can allow my device to connect to my pc with adp is using the adp updater in the recovery boot menu.
Click to expand...
Click to collapse
It is a hidden option that needs to be enabled. Follow this guide: www ninjaromeo com / enable-usb-debugging-developer-options-jelly-bean/
I just enabled this option on my Walmart BF 7" RCA RCT6378W2 tablet.
Sorry I had to mangle the link because XDA wont let me link external sources yet.
Glad I could help a few. Now, someone get on a functional recovery ;p
I have poked around a little at the stock recovery, backing it up, etc.. But am not brave enough to try and get CWM working on it.
I was able to use th Xposed framework for a few mod's no problem. Battery mod, reboot menu, hide navbar, etc.. But Xposed can only do so much.
Edit: I heard on reddit this tool also works for rooting. I have not tested it (already rooted with the other method).
http://www.cydiaimpactor.com/
Getting Debugging to work.
I was not drunk when I made this post...I have the RCT6378W2 if you go to about tablet in your settings and repeatedly tap the build number...the deveolper options will appear...I fell out of my seat when i discovered this.
On a side note...if you repeatedly tap the android version...a cute picture of the android jellybean will appear. Try it.
rca 7" dual core tablet root
Takenover83 said:
Glad I could help a few. Now, someone get on a functional recovery ;p
I have poked around a little at the stock recovery, backing it up, etc.. But am not brave enough to try and get CWM working on it.
I was able to use th Xposed framework for a few mod's no problem. Battery mod, reboot menu, hide navbar, etc.. But Xposed can only do so much.
Edit: I heard on reddit this tool also works for rooting. I have not tested it (already rooted with the other method).
http://www.cydiaimpactor.com/
Click to expand...
Click to collapse
im not down with kingo, too risky! gonna try impactor. i will report back soon :fingers-crossed:
---------- Post added at 09:31 PM ---------- Previous post was at 09:15 PM ----------
1: Install drivers. Seeing as RCA does not provide drivers, we had to find some that work. That's where PDANET comes in. Their drivers support a very wide range of Android devices. We are not installing it to tether. We just want the drivers it provides. So download PDANET, install, let it detect your device, install the drivers, and then afterwords you can uninstall it.
2: Enable Developer Options. Settings>About tablet> Tap Build Number a bunch of times till it's enabled.
3: Enable USB Debugging. Options>Developer Options>Click On (up top)>Then checkmark USB Debugging
That should clear up some of the confusion in this thread. How you root after step 3 is up to you. Personally, I did it with Kango. Which was straight forward. Connect device, hit a button, Say yes to a couple questions, reboot, presto done.
cueballs said:
It is a hidden option that needs to be enabled. Follow this guide: www ninjaromeo com / enable-usb-debugging-developer-options-jelly-bean/
I just enabled this option on my Walmart BF 7" RCA RCT6378W2 tablet.
Sorry I had to mangle the link because XDA wont let me link external sources yet.
Click to expand...
Click to collapse
Thanks, that sorted things out.
To make clear, and aid in any other inquiries, I managed to find an ADP connection mode, among other android update features. with the device off, hold volume up while turning the device on. it should boot to an image of an android with an open chest panel and the words, "no command". if you push volume up again it will provide you with options and instructions on how to execute. you can manual update the device with an SDK through USB ADP mode this way. I'm not sure if that makes anything simpler or generates a work around but I hope it helps with future development for this device.
Well got root now we need a recovery...
For some reason when trying to make sure I can send adb commands to my tablet, I am showing no devices connected. I check in device manager and it shows up as Android ADB interface for the tablet. These drivers were installed with the latest version of PDANet. Thoughts or how were you all able to get the drivers fully loaded and working? I have developer options already enabled and USB debugging mode is checked.
Info: RCA RCT6378W2 Tablet
Android 4.2.2
Kernal 3.0.36+
PDANet+ 4.12
Windows 7 64 Bit (I also tried it on my windows 7 32 bit computer)
GloryFreak said:
For some reason when trying to make sure I can send adb commands to my tablet, I am showing no devices connected. I check in device manager and it shows up as Android ADB interface for the tablet. These drivers were installed with the latest version of PDANet. Thoughts or how were you all able to get the drivers fully loaded and working? I have developer options already enabled and USB debugging mode is checked.
Info: RCA RCT6378W2 Tablet
Android 4.2.2
Kernal 3.0.36+
PDANet+ 4.12
Windows 7 64 Bit (I also tried it on my windows 7 32 bit computer)
Click to expand...
Click to collapse
You need to create "adb_usb.ini" in "Users>Username>.android".
Inside "adb_usb.ini" insert "0x2207" and save.
Source: http://blog.fh-kaernten.at/wehr/?p=1182
I need some help rooting this tablet. The point is when im installing the pdanet drivers the screen hangs saying installing drivers.. i finally was able to get the driver installed. but then king root can not connect to it. i checked the device manage and the abd phone is installed. so im not sure what im doing wrong.
scooter29 said:
I need some help rooting this tablet. The point is when im installing the pdanet drivers the screen hangs saying installing drivers.. i finally was able to get the driver installed. but then king root can not connect to it. i checked the device manage and the abd phone is installed. so im not sure what im doing wrong.
Click to expand...
Click to collapse
I had this problem too. make sure you're using the most recent version of pdanet. for whatever reason the older version just hang there and dont work right.
Installed the latest pdanet. It wont install the driver. I checked the device manager and it still shows the device without the driver. not sure what else to try..
I'm working on an ADB port which allows ADB(client/server) to run directly on Android device.
The app allows you to connect your phone to another Android device via USB OTG and perform some tasks that you normally perform from your PC(that has ADB installed).
For example
- take screenshots
- check logs
- install/remove packages
- check running processes
- push/pull files (also from locations that are not available to regular apps)
- run shell scripts executed as privileged ADB user
- create ADB backups and inspect backup files
- copy apps/APKs between phones
It's still work in progress(even though it's published), and I'm not even sure what features of ADB I should make available through the UI.
I was hoping to get some feedback here.
What are the main issues with UI? (because adb has so many features, I found it extremely hard to pack it into UI that would be intuitive)
What features would you expect from this kind of app?
Should I also embed fastboot, so that users would be able to flash Android from phone to phone?
Is it even worth to work on another one of these apps? (Maybe most people just prefer to always use ADB features directly from PC)
Bugjaeger Mobile ADB - Develop & Debug via USB OTG
Google play link: https://play.google.com/store/apps/details?id=eu.sisik.hackendebug
Update
I also ported Fastboot - user should be able to execute fastboot commands
Thanks
Correct me if I'm wrong, but can't you use a local terminal to execute certain commands?
SaadatM said:
Correct me if I'm wrong, but can't you use a local terminal to execute certain commands?
Click to expand...
Click to collapse
Not sure if I understand what you mean with "local terminal". .. Do you mean a shell spawned from regular app running on your phone?
The point of the app is to perform some privileged tasks that cannot be performed by regular apps on non-rooted phone.
You should be able to perform these tasks without the need to install ADB on your PC, or even without having a pc currently at your hands(e.g., if you're on-the-go).
Additionally, you should be able to perform a lot of these tasks with a couple of taps (instead of typing shell commands).
Is it possible to connect to localhost (127.0.0.1), and issue adb commands to the device running this app?
crunchybutternut said:
Is it possible to connect to localhost (127.0.0.1), and issue adb commands to the device running this app?
Click to expand...
Click to collapse
It's actually doing the opposite.
You issue commands from app to the connected device. The app is running the adb components you are running on your pc.
You connect one device that runs the app to another device that you want to debug. You can connect the devices via Wi-Fi or USB OTG.
bugjaeger said:
It's actually doing the opposite.
You issue commands from app to the connected device. The app is running the adb components you are running on your pc.
You connect one device that runs the app to another device that you want to debug. You can connect the devices via Wi-Fi or USB OTG.
Click to expand...
Click to collapse
I get that is the purpose, I was just curious if it was possible to point at the same device. It would make ADB stuff much simpler when no other devices are available.
I get that is the purpose, I was just curious if it was possible to point at the same device. It would make ADB stuff much simpler when no other devices are available.
Click to expand...
Click to collapse
If you made adbd listen on specific port before(adb tcpip 5555), then yes, you can issue adb commands from the app to the same device running the app.
bugjaeger said:
If you made adbd listen on specific port before(adb tcpip 5555), than yes, you can issue adb commands from the app to the same device running the app.
Click to expand...
Click to collapse
I believe you'd need root to do that though, right?
crunchybutternut said:
I believe you'd need root to do that though, right?
Click to expand...
Click to collapse
No, I don't think you need root. I used it a lot on my non-rooted Nexus 5x and once on an old Asus Zenfone during testing and it was working as expected.
That's great . I was just wondering if there was something like this already out there. Thanks for your efforts and I hope you are prosperous.
bugjaeger said:
I'm working on an ADB port which allows ADB(client/server) to run directly on Android device.
The app allows you to connect your phone to another Android device via USB OTG and perform some tasks that you normally perform from your PC(that has ADB installed).
For example
- take screenshots
- check logs
- install/remove packages
- check running processes
- push/pull files (also from locations that are not available to regular apps)
- run shell scripts executed as privileged ADB user
- create ADB backups and inspect backup files
It's still work in progress(even though it's published), and I'm not even sure what features of ADB I should make available through the UI.
I was hoping to get some feedback here.
What are the main issues with UI? (because adb has so many features, I found it extremely hard to pack it into UI that would be intuitive)
What features would you expect from this kind of app?
Should I also embed fastboot, so that users would be able to flash Android from phone to phone?
Is it even worth to work on another one of these apps? (Maybe most people just prefer to always use ADB features directly from PC)
Bugjaeger Mobile ADB - Develop & Debug via USB OTG
Google play link: play.google.com/store/apps/details?id=eu.sisik.hackendebug
Update
I've added the possibility to copy apps/APKs between phones
Thanks
Click to expand...
Click to collapse
I have a question about this app. I have installed it and find a few over internet connections (android box, fire tv) but when i connect my wifes non rooted S9 snapdragon. It asks what i want to use visa otg cable. (Smartswitch ect..)
Maybe the best way to put this is to tell you want i want to do.
I have a rooted note 5 and my wife has a new non rooted S9 from T mobile. The bloatware sucks as i am sure you can imagine. I have read how to remove the bloat with package disabler without root. My issues is i need to make PIP a sister app for package disabler a device owner app. This is done through adb and a few simple commands. My problem to solve my issue is i have no PC in order to use ADB on. I have looked for way to use phone to phone ADB with OTG but never been able to put ADB on my note 5 to use the terminal like from a PC.
Any help would be great thanks.
lodk said:
I have a question about this app. I have installed it and find a few over internet connections (android box, fire tv) but when i connect my wifes non rooted S9 snapdragon. It asks what i want to use visa otg cable. (Smartswitch ect..)
Maybe the best way to put this is to tell you want i want to do.
I have a rooted note 5 and my wife has a new non rooted S9 from T mobile. The bloatware sucks as i am sure you can imagine. I have read how to remove the bloat with package disabler without root. My issues is i need to make PIP a sister app for package disabler a device owner app. This is done through adb and a few simple commands. My problem to solve my issue is i have no PC in order to use ADB on. I have looked for way to use phone to phone ADB with OTG but never been able to put ADB on my note 5 to use the terminal like from a PC.
Any help would be great thanks.
Click to expand...
Click to collapse
So you tried to connect your phone (with Bugjaeger installed) to you wife's phone via USB OTG cable? And the phone with Bugjaeger app doesn't detect any ADB device connection (or other dialogs pop up)? Did I understand this correctly?
You might need to temporarily disable the other protocols that Android offers via USB so that there are no other dialogs popping up (on your wife's phone). On my Nexus with Android 8, I can go to Connected devices -> USB and switch it to only "Charge this device" (so PTP or the other stuff is disabled).
In case there is some other app doing stuff with ADB USB devices, you might also need to change your defaults so that Bugjaeger can handle ADB USB devices.
Then you also need to make sure that Developer options are enabled on your wife's phone (and USB debugging of course).
Once you successfully connected and authorized the phone, you should do the following
- In Bugjaeger app switch to Packages tab and click on Add button top right (the button with the plus sign). Then you should pick the package disabler APK. This should install the package to your wife's phone
- Switch back to Commands tab (first tab) and either click on plus button in top right or shell into the device with the floating action button ("<>").
You can then activate the device owner with something like this
Code:
dpm set-device-owner disabler.package.name/.DisablerAdminReceiver
*Note that I don't prefix the command with "adb shell" here
When activating device owner you also need to make sure that there are no other accounts configured on your wifes phone (e.g. google account) because otherwise it probably won't work.
You can also check my blog post where I describe how to activate device owner with Bugjaeger in more detail (at the end of the blog post)
https://sisik.eu/blog/android/dev-admin/set-dev-owner
Hope that helps
going to give this a try thanks will post later with results,
Hi, I have a problem and I hope your app can help me.
I am without a PC and I have a tablet without root where I installed the application and a Samsung mobile phone that starts only in download mode, otherwise it gives me the message: Custom Binary blocked by FRP lock
Can I install a rom or a custom recovery with the app? I tried to connect them with the cable but it does not find the device.
Crisal said:
Hi, I have a problem and I hope your app can help me.
I am without a PC and I have a tablet without root where I installed the application and a Samsung mobile phone that starts only in download mode, otherwise it gives me the message: Custom Binary blocked by FRP lock
Can I install a rom or a custom recovery with the app? I tried to connect them with the cable but it does not find the device.
Click to expand...
Click to collapse
Hi,
Unfortunately, I don't think my app can help you in this case.
Hi, thanks for the reply. Do you know a way to help me?
please help me!!
will this app install an apk ive downloaded onto my phone onto my wear os watch? i have them both connected and wifi debugging. not sure how to go about installing the apk though. any help would be appreciated. thank you
lindsay
bugjaeger said:
I'm working on an ADB port which allows ADB(client/server) to run directly on Android device.
The app allows you to connect your phone to another Android device via USB OTG and perform some tasks that you normally perform from your PC(that has ADB installed).
For example
- take screenshots
- check logs
- install/remove packages
- check running processes
- push/pull files (also from locations that are not available to regular apps)
- run shell scripts executed as privileged ADB user
- create ADB backups and inspect backup files
- copy apps/APKs between phones
It's still work in progress(even though it's published), and I'm not even sure what features of ADB I should make available through the UI.
I was hoping to get some feedback here.
What are the main issues with UI? (because adb has so many features, I found it extremely hard to pack it into UI that would be intuitive)
What features would you expect from this kind of app?
Should I also embed fastboot, so that users would be able to flash Android from phone to phone?
Is it even worth to work on another one of these apps? (Maybe most people just prefer to always use ADB features directly from PC)
Bugjaeger Mobile ADB - Develop & Debug via USB OTG
Google play link: play.google.com/store/apps/details?id=eu.sisik.hackendebug
Update
I also ported Fastboot - for now the user can dump bootloader info
Thanks
Click to expand...
Click to collapse
lindser112 said:
will this app install an apk ive downloaded onto my phone onto my wear os watch? i have them both connected and wifi debugging. not sure how to go about installing the apk though. any help would be appreciated. thank you
lindsay
Click to expand...
Click to collapse
I don't have any wear os watch at my hands right now and I can't test it at the moment. Is the APK compatible with the watch? If you're able to establish an adb connection between Bugjaeger and the watch, try to check the "Packages" tab in Bugjaeger app. There's a "+" button in the top toolbar, which allows you to select apk for installing on the target device.
The official docs are showing how to establish ADB connection with the watch - https://developer.android.com/training/wearables/apps/debugging
In Bugjaeger you then need to tap the connect button (plug with a plus sign in top toolbar), type in the IP address of the device, and tap on connect button. Both devices should be connected to the same WiFi network to make this work.
i figured it out!!!! go to packages, press the plus button, install from apps installed on phone. it was soooo easy. i couldnt get adb to work on my pc!! i am so thankful to you for this app!!!!!
lindser112 said:
will this app install an apk ive downloaded onto my phone onto my wear os watch? i have them both connected and wifi debugging. not sure how to go about installing the apk though. any help would be appreciated. thank you
lindsay
Click to expand...
Click to collapse
lindser112 said:
i figured it out!!!! go to packages, press the plus button, install from apps installed on phone. it was soooo easy. i couldnt get adb to work on my pc!! i am so thankful to you for this app!!!!!
Click to expand...
Click to collapse
Perfect :laugh:
Hi,
I'm still using CD Receiver XC-HM82. There is a dedicated, quite old, application Control App which Pioneer released some time ago. After installing the app, when a CD receiver is discovered the app unfortunately downloads some data needed for managing this particular model.
Recently I reinstalled android system and when I try downloading those data it says "download failed". The reason might be that there are some issues on Pioneer server side or they've simply stopped supporting this device.
I have still one phone where this application is fully installed and working fine. I think that the data (downloaded from Pioneer servers to manage XC-HM82) are being store at: /data/user/0. However, I haven't rooted this phone.
The question. How can I retrieve data from /data/user/0 and what's maybe even more important can I create APK which will include all data needed for managing XC-HM-82 so I could still use this application to manage my CD receiver?
Thanks for any tips
I'll answer to my own post for users who might use it.
1.Turn on Developers option in your phone
2. If you use Lineage OS allow Debugging as Root or Root via ADB
3. Check all aps you have installed
adb shell pm list packages -f -3
4. To backup base apk (in my case)
adb pull /data/app/jp.pioneer.avsoft.android.controlapp-PIpLM2ikeE7WRs7X2TlOFg==/base.apk pioneer.apk
5. To backup data of the application (including packet for controlling particular model)
adb backup -f pioneer.adb -apk jp.pioneer.avsoft.android.controlapp
Please note: you'll have to accept this action in Android
6. You should received two files: pioneer.apk and pioneer.adb
7. To restore base apk (in my case)
adb install pioneer.apk
8. To restore data of your app (in my case)
adb restore pioneer.adb
Please note: you'll have to accept this action in Android
Eventually, you should have a feel backup of you app with data folder.
This procedure has been created based on this source page:
https://gist.github.com/AnatomicJC/e773dd55ae60ab0b2d6dd2351eb977c1 \
Thanks to "@AnatomicJC"
gregory_cooky said:
I'll answer to my own post for users who might use it.
1.Turn on Developers option in your phone
2. If you use Lineage OS allow Debugging as Root or Root via ADB
3. Check all aps you have installed
adb shell pm list packages -f -3
4. To backup base apk (in my case)
/data/app/jp.pioneer.avsoft.android.controlapp-PIpLM2ikeE7WRs7X2TlOFg==/base.apk pioneer.apk
5. To backup data of the application (including packet for controlling particular model)
adb backup -f pioneer.adb -apk jp.pioneer.avsoft.android.controlapp
Please note: you'll have to accept this action in Android
6. You should received two files: pioneer.apk and pioneer.adb
7. To restore base apk (in my case)
adb install pioneer.apk
8. To restore data of your app (in my case)
adb restore pioneer.adb
Please note: you'll have to accept this action in Android
Eventually, you should have a feel backup of you app with data folder.
This procedure has been created based on this source page:
https://gist.github.com/AnatomicJC/e773dd55ae60ab0b2d6dd2351eb977c1 \
Thanks to "@AnatomicJC"
Click to expand...
Click to collapse
Gregory, thank you very much for your post!
First of all, I learned that I could stop checking my home network/router/settings etc.. to find the cause of the failing download.
I have the bluray player Pioneer MCS-FS232, with the controlapp working on my tablet.
I want to transfer the app to my phone.
I followed your steps:
Pulled the apk and backed up the data
I re-installed the app with adb install, and I restored the data with the commands above. Device report success after restoring data.
Unfortunately the app persists in asking for a download (also after restarting device). I tried also on another device, same result.
Could it be that the data restore command do need more specifications?
Thanks in advance for your reply...
Ptr
PS: the full command for step 4 would be (in my case)
adb pull /data/app/jp.pioneer.avsoft.android.controlapp-HjWUmVnui7FpTk0qKpQ3Ow==/base.apk pioneer.apk
you might want to add
adb pull
to your text in step 4
Thanks PtKt for your post and correction regarding "adb pull" missing.
There's no problem with base apk:
Pioneer ControlApp for Android - APK Download
Download Pioneer ControlApp apk 4.1.0 for Android. ControlApp is an application for corresponding Pioneer Products control.
apkpure.com
The thing is the data files (downloaded from Pioneer servers when it was still possible). What's the version of system: on a tablet and phone?
Recently, I realized that this method works on Android 9-11 but not on Android 7 cause there's a different folder structure. It recognized CD receiver but crashes when trying to connect to it.
Hello Gregory,
1. first tried it on my phone (where I had the app, but deleted it ( ). Android 11. This is the taarget-device. Not rooted. APK file installed with adb succesfully
2. when this did not work I tried on a tablet (rooted Asus transformer tf701t with timduru android 7). installed APK, date reports succes, but no working app.
3. device where the app works is Huawei tablet with android 10 (not rooted)
4. My computer is an old IMAC with Ununtu 20.4 lts
I tried to open the pioneer adb file, only partly accessible and only 5 lines.
I checked Androi/data/jp.pioneer.avsoft (etc), on my android 7 tablet, there is a map ' files' but without files.
tbc, Ptr
I'm not so advanced in this matter, but up to Android Version it's about folder /data/data/jp.pioneer... (and so on). You can't access it without root. Maybe you can do that via TWRP on Android 7 on later version it's an issue in easy way. Other solution is to use Magisk to manually copy needed files.
I'm not sure if referring to the system version different files were downloaded from Pioneer's serves. Unfortunately, I don't know.
gregory_cooky said:
I'm not so advanced in this matter, but up to Android Version it's about folder /data/data/jp.pioneer... (and so on). You can't access it without root. Maybe you can do that via TWRP on Android 7 on later version it's an issue in easy way. Other solution is to use Magisk to manually copy needed files.
I'm not sure if referring to the system version different files were downloaded from Pioneer's serves. Unfortunately, I don't know.
Click to expand...
Click to collapse
Aiai.... after a few days of efforts my conclusion was that you need root access to your source device.
And then I re-read your solution and I saw that I overlooked the last part of point 2 of your solution....
"2. If you use Lineage OS allow Debugging or Root via ADB." I did allow USB debugging but I missed 'as Root or Root via ADB'
OK, it is a pity, I'm not going to root my Android 10 tablet where the working app lives. Meanwhile I learned a lot and that's always fun....
Thank you very much for your work, if I come across another solution I will report here.
Ptr
Great. You're very welcome.
Hi guys. I have problem with this Control App from Pioneer too.
On my Android 11 phone is after starting the app visible only the loading screen or a black screen and nothing happend more.
On the old tablet with Android 5 run this app, but it want to download more files from the server, but that is not possible yet beacuse of severs shutdown? (it works well two months ago).
Can you please give me a advice how to run this app on Android 11 and share the downloaded files for my Android 5 tablet.
Because of this is using of my XC-HM72 very limited.
Thank your for every advice (My devices are not rootet).
Rdbc26 said:
Hi guys. I have problem with this Control App from Pioneer too.
On my Android 11 phone is after starting the app visible only the loading screen or a black screen and nothing happend more.
On the old tablet with Android 5 run this app, but it want to download more files from the server, but that is not possible yet beacuse of severs shutdown? (it works well two months ago).
Can you please give me a advice how to run this app on Android 11 and share the downloaded files for my Android 5 tablet.
Because of this is using of my XC-HM72 very limited.
Thank your for every advice (My devices are not rootet).
Click to expand...
Click to collapse
Hiya,
You won't download needed files (graphics or some scripts customized particularly for your XC- HM72) because there are no files on Pioneer's servers, anymore. If you don't have any device with fully working app you have to ask anyone who has it still working to export needed files (usually as "adb" file) for you then you just import it by a command:
adb restore exported_file_name.adb
Click to expand...
Click to collapse
and that's all.
Nevertheless, since Android 8 I think that the folder with user data files has a different location, so mentioned method should work for Android 8 - 11 (I haven't tested it on 12). That's all what I can suggest you.
gregory_cooky could you please share you date with adb file?Thank you
Rdbc26 said:
gregory_cooky could you please share you date with adb file?Thank you
Click to expand...
Click to collapse
There you go. Please unzip it and good luck!
Thank you for the file, but still without success. I tried adb restore pioneer.adb and on my android 5 tablet and still want to download files from innactive servers. The same I have done on my phone with android 12 and there is still the freeze or black screen :-( What now? Thanks
Rdbc26 said:
Thank you for the file, but still without success. I tried adb restore pioneer.adb and on my android 5 tablet and still want to download files from innactive servers. The same I have done on my phone with android 12 and there is still the freeze or black screen :-( What now? Thanks
Click to expand...
Click to collapse
I'm not much surprised about Android 5 cause it mightn't work. Unfortunately, I don't have any other news for you. I'm not even sure if my files were suitable for the model of yours. Further steps you should do by yourself. Maybe you'll find a solution and provide it for someone else who has the same CD Receiver as yours.
I've spend a lot of time trying to run the app for my old, but still well performing XC-HM71.
Luckily I've found old Titanium Backup (playstore) backups from 2015 and 2017. I successfully restored the app and settings on my forgotten redmi note 3 pro as root and old android were needed. If anyone is interested and want to try again, both backups are attached. Older app version is 3.5.0, never is 4.1.0. I'll recommend to start with older version, then restore just the newer app without data. It worked for me. Good luck.
But I've remembered the app a bit differently. Seems to be a bit useless, same can be done with remote itself.
Its just a bit faster to add internet radio stations, as browsing on unit itself is a bit pain in the backside.
XC-HM71 is a base version, no Bluetooth, Spotify or other currently standard addons, so really the Pioneer app do not have any real advantages.
Btw, I've had no luck with adb files from @gregory_cooky.
How to control my vsx 527 with control app? Can someone please help
Hi
I need files for Pioneer XC-HM81.
Can someone please help.
Good news!
I finally managed to transfer the needed Pioneer ControlApp data from my -non rooted- tablet (Huawei M5, android 10) to my -also non rooted- telephone (Samsung Galaxy A40, Android 11), based on gregory_cooky’s procedure in post 2 of this thread.
I tried it half a year ago (see above, my post 3) and gave up.
But a renewed attempt this week, learned me that I overlooked a crucial element: both devices need to have “USB debugging enabled” to operate the adb commands from my computer successfully.
Obviously, I misinterpreted step 2 in gregory_cooky’s procedure.
After enabling ‘developers option’ on both devices, you need to go to enable USB debuging . Without that, your devices are only partly accessible from your computer and adb commands will give error messages.
In detail: go to settings, scroll down towards about tablet or info telephone, look for software and then ‘buildnumber . Tap 7 times on buildnumber. this activates developers option. Go back to settings, you can now find developers option as the last point under settings. Tap developers option, enable it, look then for USB debugging and enable it. Do this on both devices.
Connect your source device (=device with a working ControlApp) to your computer. Open a terminal screen on your computer and type adb devices.
[email protected]:~$ adb devices
List of devices attached
P15YC3E10080000000007FC1881C0 device
Then proceed as described by gregory_cooky in post 2.
Be sure to have your source files (ControlApp apk and data) in the root of your home directory, otherwise adb cannot find it. Be aware this type of commands is capital sensitive, so if you ask for Pioneer.adb but the name of the file is pioneer.adb the computer comes with No such file or directory.
I use the ControlApp for my Pioneer MCS-FS232, which I can now easily operate from my arm chair. Volume, switch from CD to Aux or FM, etc.
Peter
It appears ControlApp has finally given up.
Looking if anyone has perhaps a copy of the source files.
ControlApp downloads the files from the following URL: http://www.pioneer.eu/files/support/Wr5Ch9makajA/smartphone_app/common/controlapp/sma/SmaHtml_14.zip
Note that this is a HTTP URL, so can easily be faked for the device, however need the ZIP. Used to have it, now it's gone
hello,
would anyone have a working adb for Pioneer X-HM72 please?