Hey everyone,
I have the BLN-L24. I am only able to access FASTBOOT to do anything.
I cannot access eRecovery. VOLUP+PWR fails to load.
I cannot access the DLOAD method to flash a ROM. VOLUP+VOLDWN+PWR fails.
I cannot boot to the ROM.
Bootloader is locked. From what I understand, this cannot be unlocked due to Huawei no longer offering unlock codes.
FRP is unlocked.
So, are there any FASTBOOT options that I can use to flash this phone?
Saw that @shashank1320 has a lot of exp in this... pinging him.
Related
I tried to use this tool https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108 to rebrand my mate 9 and I was able to unlock my bootloader before I started this tool and no problems there. Next I open the tool and went in and followed all the steps without problems all the way down past rebranding and to the step where I have to unlock my bootloader again. This time, FRP engaged and doesn't let me go past - I am stuck: i cannot reboot into the system to change any settings. At this point I tried a variety of methods, erecovery and funky huawei, they both end up saying getting package info failed. Now I am stuck. I cannot boot into the OS, it just kicks me straight into erecovery and erecovery isn't doing much recovery at all. Any help is greatly appreciated.
Billchen0014 said:
I tried to use this tool https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108 to rebrand my mate 9 and I was able to unlock my bootloader before I started this tool and no problems there. Next I open the tool and went in and followed all the steps without problems all the way down past rebranding and to the step where I have to unlock my bootloader again. This time, FRP engaged and doesn't let me go past - I am stuck: i cannot reboot into the system to change any settings. At this point I tried a variety of methods, erecovery and funky huawei, they both end up saying getting package info failed. Now I am stuck. I cannot boot into the OS, it just kicks me straight into erecovery and erecovery isn't doing much recovery at all. Any help is greatly appreciated.
Click to expand...
Click to collapse
you need to relock bootloader, after it phone is resetting. then you need to unlock it, install TWRP , then you need to reflash a COMPLETE backup from MHA-AL00C00 or MHA-L29C626. Then restore to this. This is the only working solution. maybe i will create a backup from AL00
012345678 said:
you need to relock bootloader, after it phone is resetting. then you need to unlock it, install TWRP , then you need to reflash a COMPLETE backup from MHA-AL00C00 or MHA-L29C626. Then restore to this. This is the only working solution. maybe i will create a backup from AL00
Click to expand...
Click to collapse
the bootloader is locked, or so says the fastboot screen along with FRP which is why i cannot unlock the bootloader to install TWRP...
Need Warning
I think this thread (https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108) should add some warning.
I meet the same problem today.
wingkou said:
I think this thread (https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108) should add some warning.
I meet the same problem today.
Click to expand...
Click to collapse
That makes three of us. I ended up with the same problem after getting to step E in the rebranding. I'm no stuck not being able to unlock my bootloader as it says Phone locked in green and FRP lock in green. OEM unlocking option is greyed out in developer options
before i found a solution i hardbricked my mate 9, but it works for soft bricked mate 9 too https://forum.xda-developers.com/mate-9/help/solution-19-00-fix-hardbricked-huawei-t3750315 i was in the same situation, thats how i fixed it, just follow steps from how to use the DC-phoenix tool with Factory Firmware file, update.app and hw.app
Now I'm in the same situation
After rebranding my Honor View 10 BKL AL20 to BKL L04, it can't boot into system and frp locked oem locked. Erecovery says getting package info failed.
I was trying to flash an oeminfo file from a C432 on to my bln-l24 after flashing Elite 5.1. I mistakenly thought I could rename oeminfo to oeminfo.img and flash with twrp. Well, I did that, and now I have a brick. At first, all I could get to was erecovery, which would fail when I let it do its thing. I've tried to flash B360 back on it using the 3 finger method with no luck. I flashed to MM rollback package, which was successful but still would only boot to erecovery. I flashed the full MM package, which again was successful. However, not it just hangs on the blue honor screen after the boot animation. I can't do anything in fastboot without getting a Command Not Allowed message since I am FRP locked. Any ideas? Hopefully I'm not SOL....Thanks.
Flash boot.img
It's very simple, flash the boot.img of MM or Nougat if that is the one you successfully flashed. It should work. Don't freak out.
Ronedion said:
It's very simple, flash the boot.img of MM or Nougat if that is the one you successfully flashed. It should work. Don't freak out.
Click to expand...
Click to collapse
I can't. Everytime I try to flash something in fastboot, it says command not allowed
Download Huawei Multi Tools by Team MT
Download the above and use it to unbrick your phone ?
Just start your device in bootloader and run "fastboot oem unlock XXXXXXXXXX" with our unlocking code again.
Even if it states to be unlocked on the screen already.
Good luck!
RealParity said:
Just start your device in bootloader and run "fastboot oem unlock XXXXXXXXXX" with our unlocking code again.
Even if it states to be unlocked on the screen already.
Good luck!
Click to expand...
Click to collapse
Tried it, I get Command Not Allowed error message. I think the problem is I'm FRP locked as well, which interferes with a lot of fastboot commands. Thanks for the assistance though.
as you have flashed the OEMINFO of C432, you need to flash the update.app files for BLN-L21C432, available here
https://forum.xda-developers.com/honor-6x/how-to/guide-successful-debranding-to-bln-t3701050
by any chance you are able to access TWRP now?
if the 1st method doesnt work then refer this https://forum.xda-developers.com/honor-6x/how-to/guide-unbrick-bln-l24-rollback-to-b310-t3695154
if not, then on DC Phoenix is your option. you can more info in multi tool thread under Honor 7 section.
Ok so, this isn't my first time flashing and returning to stock with phones, just the worst. Any help is appreciated.
I unlocked the bootloader, installed TWRP and tried to flash a few ROMS which were not working great so I went to go back to stock and then the **** show happened. Its the LO4 Model. I flashed stock recovery, Relocked the bootloader and tried the Force Flash Update method. Well now the phone is stuck in a boot loop(Cant power it down), cant boot to erecovery/ recovery -- I can get to fast boot mode but the FRP is locked so I can not do anything all commands fail with an error.
Any thoughts? I just need to get it back to stock OR a working ROM- I plan on selling this phone and My wife (it was her phone) has upgraded to a Galaxy S9. If I cant get it to work, I will post it on swappa as is for a cheap price
Thanks!
Same Issue
I did the same thing, however when in fastboot type fastboot oem unlock (put the code here) and this will unlock your bootloader. I did this I even managed to flash the stock system cust recovery and boot, but it doesnt boot into recovory, erecover, or even download mode to download the software from the sd card. Any ideas?
I tried that fastboot code and I get an error because of the FRP lock
Hi.
First: Sorry My bad English.
So. The base is: FRD-L09C432 officially upgraded to Oreo. Data partition encrypted, bootloader and FRP unlocked status, TWRP installed and my phone rooted with Magisk. After some read in this and other forums I edited the phone fstab files, to delete data encryption. After edit this files I do a "Format Data" in TWRP. After that the FRP status changed from "Unlocked" to "Locked", and in Settings the "OEM Unlock" disabled and grayed. Bootloader status stay in unlocked. So this is the current state. The Recovery not changeable from TWRP to stock, because FRP-Lock status.
So, My questions is: How do I unlock FRP? If I rollback to Nougat, the FRP is unlock or not, or what? How do I rollback with TWRP? HurUpdater? What can I do, because if I rollback and FRP stay locked, I won't flash back the TWRP. And if this occur, I can't root my phone, and have other problems.
Ideas?
Did you try to unlock bootloader via fastboot?
cococchio said:
Did you try to unlock bootloader via fastboot?
Click to expand...
Click to collapse
bootloader already unlocked. I won't try to relock, because 1 months ago I relocked, and my phone is bricked. Won't boot to system, and just DC-Unlocker helps to bring back my phone to life.
Good to know. I am also bricked but I was able to unlock bootloader via fastboot. I only have access to error mode.
flash via download mode and wifi
Hi,
I been trying to unlock bootloader for my honor olay with unofficial ways as you know honor dont provide bootloader code. They actually mention that they will provide it from service center which is also terminated.
So i dig a bit. Open up my phone and tried to flash twrp via test point. In order to bypass bootloader. Ican say its 50 percent working as it only erase stock recovery but dont boot the twrp. Its always stuck at ereocvery download. Where it will connect to wifi will download the recovery for you.
Anyone is willing ro help me will be appreciated.
search the forums.
huawei no longer allows boot loader unlcoking