So I updated my FRD-L04 to the Nougat Beta, and while I was following the instructions and Flashesd the Update. For some reason I lost TWRP and cant boot into recovery, my bootloader is unlocked.....however in developer options OEM Unlock is grey out and i cant enable it.... So when ever i try to run a command through fastboot it says is not allow.... and when i try ti re-lock the bootloader i get FAILED (remote: root type is risk)... I try to roll back package from Huawei website but that also fails..... Now i dont know what to do.
I am in the same boat. Did the new beta via twrp. My usb debug was greyed out but i was able to to get it to turn on for short moments.
I have now lost twrp and now the phone wont even boot the the Android 7 beta os!
I have fastboot but when i try to fastboot flash system or cust they both fail. My bootloader is still unlocked tho.
edit: I downloaded the beta flashable zip and the update that is seperate. I took out the boot recovery cust and system from them and was able to flash them via fastboot. The phone now boots back to the android 7.0 beta. Phew!!!!!
Now to attempt downgrade to 6.0 adn get twrp back
You should look for a downgrade package
Since you have lost TWRP, I think you will have to reinstall it and root your device again.
DarkGuyver said:
Since you have lost TWRP, I think you will have to reinstall it and root your device again.
Click to expand...
Click to collapse
I tried thta multiple times, but when i flash recovery it says its not allow, again i think is because i can enable oem unlock on settings
You should look for a downgrade package
CronaMell said:
You should look for a downgrade package
Click to expand...
Click to collapse
Like I mention on my initial post I have already tried the downgrade package..but it does not work. I can't enable oem unlock since is grayed out ... my boot loader is unlock and I can't use the phone but NFC Bluetooth etc does not work.. I even tried to flash the downgrade package recovery and boot image through fast boot but it's not allow since I can't enable oem unlock...
I'll research a bit and see If I can find something
I tried to use this tool https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108 to rebrand my mate 9 and I was able to unlock my bootloader before I started this tool and no problems there. Next I open the tool and went in and followed all the steps without problems all the way down past rebranding and to the step where I have to unlock my bootloader again. This time, FRP engaged and doesn't let me go past - I am stuck: i cannot reboot into the system to change any settings. At this point I tried a variety of methods, erecovery and funky huawei, they both end up saying getting package info failed. Now I am stuck. I cannot boot into the OS, it just kicks me straight into erecovery and erecovery isn't doing much recovery at all. Any help is greatly appreciated.
Billchen0014 said:
I tried to use this tool https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108 to rebrand my mate 9 and I was able to unlock my bootloader before I started this tool and no problems there. Next I open the tool and went in and followed all the steps without problems all the way down past rebranding and to the step where I have to unlock my bootloader again. This time, FRP engaged and doesn't let me go past - I am stuck: i cannot reboot into the system to change any settings. At this point I tried a variety of methods, erecovery and funky huawei, they both end up saying getting package info failed. Now I am stuck. I cannot boot into the OS, it just kicks me straight into erecovery and erecovery isn't doing much recovery at all. Any help is greatly appreciated.
Click to expand...
Click to collapse
you need to relock bootloader, after it phone is resetting. then you need to unlock it, install TWRP , then you need to reflash a COMPLETE backup from MHA-AL00C00 or MHA-L29C626. Then restore to this. This is the only working solution. maybe i will create a backup from AL00
012345678 said:
you need to relock bootloader, after it phone is resetting. then you need to unlock it, install TWRP , then you need to reflash a COMPLETE backup from MHA-AL00C00 or MHA-L29C626. Then restore to this. This is the only working solution. maybe i will create a backup from AL00
Click to expand...
Click to collapse
the bootloader is locked, or so says the fastboot screen along with FRP which is why i cannot unlock the bootloader to install TWRP...
Need Warning
I think this thread (https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108) should add some warning.
I meet the same problem today.
wingkou said:
I think this thread (https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108) should add some warning.
I meet the same problem today.
Click to expand...
Click to collapse
That makes three of us. I ended up with the same problem after getting to step E in the rebranding. I'm no stuck not being able to unlock my bootloader as it says Phone locked in green and FRP lock in green. OEM unlocking option is greyed out in developer options
before i found a solution i hardbricked my mate 9, but it works for soft bricked mate 9 too https://forum.xda-developers.com/mate-9/help/solution-19-00-fix-hardbricked-huawei-t3750315 i was in the same situation, thats how i fixed it, just follow steps from how to use the DC-phoenix tool with Factory Firmware file, update.app and hw.app
Now I'm in the same situation
After rebranding my Honor View 10 BKL AL20 to BKL L04, it can't boot into system and frp locked oem locked. Erecovery says getting package info failed.
Hey XDA folks, today I've flashed oreo in l09c10b521 using TWRP and HuRupdater. In this process I've flashed HuRupdate.zip then all three files got flashed, unfortunately I formated data partition and rebooted. After reboot, phone didn't booted until I perform factory reset in stock recovery. Finally phone booted up but no Setup Wizard, no Gapps, only filemanger and some emui apps.
In Dev options OEM unlock option is faded/greyed out. Unable to flash anything in ADB
>> Is there any way so that I can go back to Nougat and use Gapps <<
If its not possible then how can I install Gapps?
Pranav Kumar said:
Hey XDA folks, today I've flashed oreo in l09c10b521 using TWRP and HuRupdater. In this process I've flashed HuRupdate.zip then all three files got flashed, unfortunately I formated data partition and rebooted. After reboot, phone didn't booted until I perform factory reset in stock recovery. Finally phone booted up but no Setup Wizard, no Gapps, only filemanger and some emui apps.
>> Is there any way so that I can go back to Nougat and use Gapps <<
If its not possible then how can I install Gapps?
Click to expand...
Click to collapse
Similar here with some differences. FRP-Locked, Phone unlocked, TWRP previously installed. I Can't install stock recovery because FRP locked. No Gapps, no keyboard, just some Huawei apps. OEM Unlock is grey, but bootloader unlocked.
The same happened to me, this: https://forum.xda-developers.com/honor-8/development/firmware-huawei-honor-8-frd-l09-stock-t3696921 helped to rollback and everything works fine .
MartyWeber28 said:
The same happened to me, this: https://forum.xda-developers.com/honor-8/development/firmware-huawei-honor-8-frd-l09-stock-t3696921 helped to rollback and everything works fine .
Click to expand...
Click to collapse
I've tried dloading vendor(update hw_ru.img) but it failed, then I tried main(update.app) firmware then also failed.
Pranav Kumar said:
I've tried dloading vendor(update hw_ru.img) but it failed, then I tried main(update.app) firmware then also failed.
Click to expand...
Click to collapse
Same here.
First you have to dload the main firmware file, then the renamed vendor.
MartyWeber28 said:
First you have to dload the main firmware file, then the renamed vendor.
Click to expand...
Click to collapse
When you try this method, the bootloader and phone (FRP) in locked state? Or Bootloader unlocked?
My phone is just booting just to Stock recovery, eRecovery or fastboot, but the "OS" won't boot. If I restart, or power on my phone just boot to eRecevery. Now in the fastboot mode the bootloader and FRP in locked state.
All software install failed.
No luck over 5-6 hours. All firmwares I want to flash ended "Software installation failed". In FF I find a B407 rollback package from Oreo, but its still not approved yet
same here, does anyone know how to fix it?
immichao said:
same here, does anyone know how to fix it?
Click to expand...
Click to collapse
Same? Won't booting and just recovery, erecovery or fastboot come up, frp and bootloader locked? Oh, and no luck for flashing any firmware?
I'm affraid, just the B407 rollback package bring back to life, but still not approved yet.
Mumtaz77 said:
Same? Won't booting and just recovery, erecovery or fastboot come up, frp and bootloader locked? Oh, and no luck for flashing any firmware?
I'm affraid, just the B407 rollback package bring back to life, but still not approved yet.
Click to expand...
Click to collapse
actually it boots, but i have an emui without google apps, and a greyed oem unlocking option, so i can't unlock
i ve same issue, frp and bootloader locked. all firmware stop at 5% no gapps and greyed oem setting (c10b521)
I do not know how to find the "magic" firmware that does not fail...
should you understand based on which criterion is installed the firmware, recovery version? version of the system? I have no idea
For locked FRP, you can relock the bootloader and after that unlock again. It unlocks the FRP again. Just write "relock" instead of "unlock".
And about the "not approved" packages, seems that Hurupdater doesn't care, it just installs.
But for some magic firmware, just download some way older firmware for dload installation. For me that always works on my L09C432, is 360.
MysTiCy said:
For locked FRP, you can relock the bootloader and after that unlock again. It unlocks the FRP again. Just write "relock" instead of "unlock".
Click to expand...
Click to collapse
Ok. Just one problem occured for Me: I do a bootloader relock, and this ended a not bootable OS, Relocked Bootloader and locked FRP. Just boot to eRecovery.
MysTiCy said:
But for some magic firmware, just download some way older firmware for dload installation. For me that always works on my L09C432, is 360.
Click to expand...
Click to collapse
Just one problem with this: 360 is not a rollback package, so if you want to refresh (back) to this, just show You an "Installation Failed" message, and nothing more. So 360 just works if you want to refresh from a lower Nougat or MarsMallow build, or "rollback" from a higher build Nougat firmware.
MysTiCy said:
For locked FRP, you can relock the bootloader and after that unlock again. It unlocks the FRP again. Just write "relock" instead of "unlock".
And about the "not approved" packages, seems that Hurupdater doesn't care, it just installs.
But for some magic firmware, just download some way older firmware for dload installation. For me that always works on my L09C432, is 360.
Click to expand...
Click to collapse
I tried and ended with this error
"FAILED (remote: stat not match)
finished. total time: -0.000s"
Mumtaz77 said:
Ok. Just one problem occured for Me: I do a bootloader relock, and this ended a not bootable OS, Relocked Bootloader and locked FRP. Just boot to eRecovery.
Just one problem with this: 360 is not a rollback package, so if you want to refresh (back) to this, just show You an "Installation Failed" message, and nothing more. So 360 just works if you want to refresh from a lower Nougat or MarsMallow build, or "rollback" from a higher build Nougat firmware.
Click to expand...
Click to collapse
You relocked, then unlocked, and it didn't unlock? Strange. I know atleast that the same unlock/relock commands work with nougat and oreo. I've done it a few times.
360 is a full package(FULLOTA-MF-PV) for my model. Other models have different package numbers.
You need to have a full package. Make a folder "dload" on root of an SD-card, with "update.app"-file in it. I have also the "meta-inf" and "full_mainpkg.tag" there, but i don't know if they are really needed. Then just boot the phone with power+volup+voldown and it should install.
No. I relocked the bootloader, but after that and the "automatic" factory reset the phone not boot to the os, just to the erecovery. So i can not change the "OEM unlock" option to unlock again the bootloader.
The install. I'l know the install method, but not work. Any package what 8 want to install ended (after 5%) a "software install failed". Ok. The 360 PV package is a good one, but this package not work, if you want to roll back from a higher master version, like oreo. This package just work if you in nougat, or MM.
Pranav Kumar said:
Hey XDA folks, today I've flashed oreo in l09c10b521 using TWRP and HuRupdater. In this process I've flashed HuRupdate.zip then all three files got flashed, unfortunately I formated data partition and rebooted. After reboot, phone didn't booted until I perform factory reset in stock recovery. Finally phone booted up but no Setup Wizard, no Gapps, only filemanger and some emui apps.
In Dev options OEM unlock option is faded/greyed out. Unable to flash anything in ADB
>> Is there any way so that I can go back to Nougat and use Gapps <<
If its not possible then how can I install Gapps?
Click to expand...
Click to collapse
You must flashing rollback with this method
https://youtu.be/8wH0N2brgTA
Just working with hisuite 5.0.2.300
alimokhtarabadi said:
You must flashing rollback with this method
https://youtu.be/8wH0N2brgTA
Just working with hisuite 5.0.2.300
Click to expand...
Click to collapse
Yes, but it s needed flash recovery patched first...
As long as it boots, yes you can repair. You must ask someone with frp UNLOCK to back up partition 'FRP'. Then they send this partition and you flash it (requires root) and now FRP is good in bootloader.
Sent from my kminiltexx using XDA Labs
hackintosh5 said:
As long as it boots, yes you can repair. You must ask someone with frp UNLOCK to back up partition 'FRP'. Then they send this partition and you flash it (requires root) and now FRP is good in bootloader.
Sent from my kminiltexx using XDA Labs
Click to expand...
Click to collapse
The device starts, but how do I flash the frp partition without root?
hello,
i did unlock the bootloader for my zenfone 7 pro
and installed twrp recovery then rooted via magisk
cuz I wanted voLTE but it didn't work for me so I wanted to be back to stock
I relock the phone using fastboot command
fastboot oem asus-lock
it did relock my phone
but there is no OS nor Recovery !
when I power my phone on the fastboot UI appears. even if I select recovery nothing changes. opens fastboot only
how to re install the firmware ? help plz
in case anyone has the same problem.
i did solve it by flashing the (raw) firmware via fastboot ( Flash_AFT method )
M-772007 said:
hello,
i did unlock the bootloader for my zenfone 7 pro
and installed twrp recovery then rooted via magisk
cuz I wanted voLTE but it didn't work for me so I wanted to be back to stock
I relock the phone using fastboot command
fastboot oem asus-lock
it did relock my phone
but there is no OS nor Recovery !
when I power my phone on the fastboot UI appears. even if I select recovery nothing changes. opens fastboot only
how to re install the firmware ? help plz
Click to expand...
Click to collapse
There are new guides on how to get volte if you want to try again.
[Guide] Easy method to Enable Volte (with root) on Tmobile and maybe other networks on Android 11 and maybe 10
So first you have to root. I used twrp and magisk. There are guides on how to do that you can find by searching around. Then once you do that, follow these directions, What I did was manually entered all of these setprop commands below, on the...
forum.xda-developers.com
This is one but there are others if you need the help.
After relock bootloader i can send phone to warranty?
I tried to relock the phone with the command "fastboot oem asus-lock", but it shows "waitting for any device" and my phone just sit there and do nothing..
Any other method to relock the Zenfone 7 pro?
M-772007 said:
hello,
i did unlock the bootloader for my zenfone 7 pro
and installed twrp recovery then rooted via magisk
cuz I wanted voLTE but it didn't work for me so I wanted to be back to stock
I relock the phone using fastboot command
fastboot oem asus-lock
it did relock my phone
but there is no OS nor Recovery !
when I power my phone on the fastboot UI appears. even if I select recovery nothing changes. opens fastboot only
how to re install the firmware ? help plz
Click to expand...
Click to collapse
I believe that relock is impossible and but to make the device recovery to installed status of stock rom keeping with unlock bootloader.
Please see my post. May make it help or not.
When I try to burn rom with TWRP, img burns but it doesn't start and zip gives an error and cannot burn.
When I first burned custom ROM (unofficial AEX), it did not start, so when I deleted the data from TWRP, it seems that I deleted things that should not be erased, so even if I burn it from the zip file, with the error message in the image below I...
forum.xda-developers.com
So, i recently flashed arrow os 12.1 on my poco x4 pro (veux) using twrp. Flashing the rom removed twrp and now i cant flash it back because fastboot says that my bootloader is locked...
Of course, it isn't and the problem is that allow oem unlocking isn't on... I really would appreciate some help because i've been stuck on this rom for a day.
Gonna wait for some answers, thank you.
In the first place, flashing the rom shouldn't relock your bootloader. Can you please reboot to fastboot mode and use mi unlock tool with the same account you used to unlock bootloader first time.
Soma Das said:
In the first place, flashing the rom shouldn't relock your bootloader. Can you please reboot to fastboot mode and use mi unlock tool with the same account you used to unlock bootloader first time.
Click to expand...
Click to collapse
Thank you for your response. Sadly i already tried that and the tool says that the phone is unlocked.
I'm trying to reflash stock rom via EDL mode, but i always get some error.
By the way, when using fastboot getvar command, it says that my bootloader is locked.
So, i recently bought a poco x4 pro (veux) and flashed a custom rom using twrp. Sadly, the rom's recovery managed to overwrite twrp and when i tried to flash twrp back, i could not flash it because fastboot said my bootloader wasn't unlocked. When i tried to unlock the phone again the xiaomi tool said that the bootloader was already unlocked. So, i used the getvar command which said that my bootloader was locked. So, i remembered that i didnt turn on allow oem unlocking in developer options. Sadly, when i looked for it the setting wasn't there. I tried using Edl mode to go back to stock but with no success. I always get some failed to read hello packet error. Can someone give me any help? Im kinda getting desperate...
WhyisAethertaken said:
So, i recently bought a poco x4 pro (veux) and flashed a custom rom using twrp. Sadly, the rom's recovery managed to overwrite twrp and when i tried to flash twrp back, i could not flash it because fastboot said my bootloader wasn't unlocked. When i tried to unlock the phone again the xiaomi tool said that the bootloader was already unlocked. So, i used the getvar command which said that my bootloader was locked. So, i remembered that i didnt turn on allow oem unlocking in developer options. Sadly, when i looked for it the setting wasn't there. I tried using Edl mode to go back to stock but with no success. I always get some failed to read hello packet error. Can someone give me any help? Im kinda getting desperate...
Click to expand...
Click to collapse
Go to service centre if it is critical. I have never seen such case so i couldn't help. I am afraid that you would have to pay the service centre people money for reflashing your device.
Also have you tried flashing fastboot ROM (MIUI) through fastboot? Also try to flash stock recovery rom via the recovery you have now currently.
Another thing you could try is using the Xiaomi official flashing utility (which is not unlock tool) to flash stock rom which does not require OEM unlock.
Soma Das said:
Go to service centre if it is critical. I have never seen such case so i couldn't help. I am afraid that you would have to pay the service centre people money for reflashing your device.
Also have you tried flashing fastboot ROM (MIUI) through fastboot? Also try to flash stock recovery rom via the recovery you have now currently.
Another thing you could try is using the Xiaomi official flashing utility (which is not unlock tool) to flash stock rom which does not require OEM unlock.
Click to expand...
Click to collapse
Thanks for the reply, i will try what you said.