Hey XDA folks, today I've flashed oreo in l09c10b521 using TWRP and HuRupdater. In this process I've flashed HuRupdate.zip then all three files got flashed, unfortunately I formated data partition and rebooted. After reboot, phone didn't booted until I perform factory reset in stock recovery. Finally phone booted up but no Setup Wizard, no Gapps, only filemanger and some emui apps.
In Dev options OEM unlock option is faded/greyed out. Unable to flash anything in ADB
>> Is there any way so that I can go back to Nougat and use Gapps <<
If its not possible then how can I install Gapps?
Pranav Kumar said:
Hey XDA folks, today I've flashed oreo in l09c10b521 using TWRP and HuRupdater. In this process I've flashed HuRupdate.zip then all three files got flashed, unfortunately I formated data partition and rebooted. After reboot, phone didn't booted until I perform factory reset in stock recovery. Finally phone booted up but no Setup Wizard, no Gapps, only filemanger and some emui apps.
>> Is there any way so that I can go back to Nougat and use Gapps <<
If its not possible then how can I install Gapps?
Click to expand...
Click to collapse
Similar here with some differences. FRP-Locked, Phone unlocked, TWRP previously installed. I Can't install stock recovery because FRP locked. No Gapps, no keyboard, just some Huawei apps. OEM Unlock is grey, but bootloader unlocked.
The same happened to me, this: https://forum.xda-developers.com/honor-8/development/firmware-huawei-honor-8-frd-l09-stock-t3696921 helped to rollback and everything works fine .
MartyWeber28 said:
The same happened to me, this: https://forum.xda-developers.com/honor-8/development/firmware-huawei-honor-8-frd-l09-stock-t3696921 helped to rollback and everything works fine .
Click to expand...
Click to collapse
I've tried dloading vendor(update hw_ru.img) but it failed, then I tried main(update.app) firmware then also failed.
Pranav Kumar said:
I've tried dloading vendor(update hw_ru.img) but it failed, then I tried main(update.app) firmware then also failed.
Click to expand...
Click to collapse
Same here.
First you have to dload the main firmware file, then the renamed vendor.
MartyWeber28 said:
First you have to dload the main firmware file, then the renamed vendor.
Click to expand...
Click to collapse
When you try this method, the bootloader and phone (FRP) in locked state? Or Bootloader unlocked?
My phone is just booting just to Stock recovery, eRecovery or fastboot, but the "OS" won't boot. If I restart, or power on my phone just boot to eRecevery. Now in the fastboot mode the bootloader and FRP in locked state.
All software install failed.
No luck over 5-6 hours. All firmwares I want to flash ended "Software installation failed". In FF I find a B407 rollback package from Oreo, but its still not approved yet
same here, does anyone know how to fix it?
immichao said:
same here, does anyone know how to fix it?
Click to expand...
Click to collapse
Same? Won't booting and just recovery, erecovery or fastboot come up, frp and bootloader locked? Oh, and no luck for flashing any firmware?
I'm affraid, just the B407 rollback package bring back to life, but still not approved yet.
Mumtaz77 said:
Same? Won't booting and just recovery, erecovery or fastboot come up, frp and bootloader locked? Oh, and no luck for flashing any firmware?
I'm affraid, just the B407 rollback package bring back to life, but still not approved yet.
Click to expand...
Click to collapse
actually it boots, but i have an emui without google apps, and a greyed oem unlocking option, so i can't unlock
i ve same issue, frp and bootloader locked. all firmware stop at 5% no gapps and greyed oem setting (c10b521)
I do not know how to find the "magic" firmware that does not fail...
should you understand based on which criterion is installed the firmware, recovery version? version of the system? I have no idea
For locked FRP, you can relock the bootloader and after that unlock again. It unlocks the FRP again. Just write "relock" instead of "unlock".
And about the "not approved" packages, seems that Hurupdater doesn't care, it just installs.
But for some magic firmware, just download some way older firmware for dload installation. For me that always works on my L09C432, is 360.
MysTiCy said:
For locked FRP, you can relock the bootloader and after that unlock again. It unlocks the FRP again. Just write "relock" instead of "unlock".
Click to expand...
Click to collapse
Ok. Just one problem occured for Me: I do a bootloader relock, and this ended a not bootable OS, Relocked Bootloader and locked FRP. Just boot to eRecovery.
MysTiCy said:
But for some magic firmware, just download some way older firmware for dload installation. For me that always works on my L09C432, is 360.
Click to expand...
Click to collapse
Just one problem with this: 360 is not a rollback package, so if you want to refresh (back) to this, just show You an "Installation Failed" message, and nothing more. So 360 just works if you want to refresh from a lower Nougat or MarsMallow build, or "rollback" from a higher build Nougat firmware.
MysTiCy said:
For locked FRP, you can relock the bootloader and after that unlock again. It unlocks the FRP again. Just write "relock" instead of "unlock".
And about the "not approved" packages, seems that Hurupdater doesn't care, it just installs.
But for some magic firmware, just download some way older firmware for dload installation. For me that always works on my L09C432, is 360.
Click to expand...
Click to collapse
I tried and ended with this error
"FAILED (remote: stat not match)
finished. total time: -0.000s"
Mumtaz77 said:
Ok. Just one problem occured for Me: I do a bootloader relock, and this ended a not bootable OS, Relocked Bootloader and locked FRP. Just boot to eRecovery.
Just one problem with this: 360 is not a rollback package, so if you want to refresh (back) to this, just show You an "Installation Failed" message, and nothing more. So 360 just works if you want to refresh from a lower Nougat or MarsMallow build, or "rollback" from a higher build Nougat firmware.
Click to expand...
Click to collapse
You relocked, then unlocked, and it didn't unlock? Strange. I know atleast that the same unlock/relock commands work with nougat and oreo. I've done it a few times.
360 is a full package(FULLOTA-MF-PV) for my model. Other models have different package numbers.
You need to have a full package. Make a folder "dload" on root of an SD-card, with "update.app"-file in it. I have also the "meta-inf" and "full_mainpkg.tag" there, but i don't know if they are really needed. Then just boot the phone with power+volup+voldown and it should install.
No. I relocked the bootloader, but after that and the "automatic" factory reset the phone not boot to the os, just to the erecovery. So i can not change the "OEM unlock" option to unlock again the bootloader.
The install. I'l know the install method, but not work. Any package what 8 want to install ended (after 5%) a "software install failed". Ok. The 360 PV package is a good one, but this package not work, if you want to roll back from a higher master version, like oreo. This package just work if you in nougat, or MM.
Pranav Kumar said:
Hey XDA folks, today I've flashed oreo in l09c10b521 using TWRP and HuRupdater. In this process I've flashed HuRupdate.zip then all three files got flashed, unfortunately I formated data partition and rebooted. After reboot, phone didn't booted until I perform factory reset in stock recovery. Finally phone booted up but no Setup Wizard, no Gapps, only filemanger and some emui apps.
In Dev options OEM unlock option is faded/greyed out. Unable to flash anything in ADB
>> Is there any way so that I can go back to Nougat and use Gapps <<
If its not possible then how can I install Gapps?
Click to expand...
Click to collapse
You must flashing rollback with this method
https://youtu.be/8wH0N2brgTA
Just working with hisuite 5.0.2.300
alimokhtarabadi said:
You must flashing rollback with this method
https://youtu.be/8wH0N2brgTA
Just working with hisuite 5.0.2.300
Click to expand...
Click to collapse
Yes, but it s needed flash recovery patched first...
As long as it boots, yes you can repair. You must ask someone with frp UNLOCK to back up partition 'FRP'. Then they send this partition and you flash it (requires root) and now FRP is good in bootloader.
Sent from my kminiltexx using XDA Labs
hackintosh5 said:
As long as it boots, yes you can repair. You must ask someone with frp UNLOCK to back up partition 'FRP'. Then they send this partition and you flash it (requires root) and now FRP is good in bootloader.
Sent from my kminiltexx using XDA Labs
Click to expand...
Click to collapse
The device starts, but how do I flash the frp partition without root?
Related
So I updated my FRD-L04 to the Nougat Beta, and while I was following the instructions and Flashesd the Update. For some reason I lost TWRP and cant boot into recovery, my bootloader is unlocked.....however in developer options OEM Unlock is grey out and i cant enable it.... So when ever i try to run a command through fastboot it says is not allow.... and when i try ti re-lock the bootloader i get FAILED (remote: root type is risk)... I try to roll back package from Huawei website but that also fails..... Now i dont know what to do.
I am in the same boat. Did the new beta via twrp. My usb debug was greyed out but i was able to to get it to turn on for short moments.
I have now lost twrp and now the phone wont even boot the the Android 7 beta os!
I have fastboot but when i try to fastboot flash system or cust they both fail. My bootloader is still unlocked tho.
edit: I downloaded the beta flashable zip and the update that is seperate. I took out the boot recovery cust and system from them and was able to flash them via fastboot. The phone now boots back to the android 7.0 beta. Phew!!!!!
Now to attempt downgrade to 6.0 adn get twrp back
You should look for a downgrade package
Since you have lost TWRP, I think you will have to reinstall it and root your device again.
DarkGuyver said:
Since you have lost TWRP, I think you will have to reinstall it and root your device again.
Click to expand...
Click to collapse
I tried thta multiple times, but when i flash recovery it says its not allow, again i think is because i can enable oem unlock on settings
You should look for a downgrade package
CronaMell said:
You should look for a downgrade package
Click to expand...
Click to collapse
Like I mention on my initial post I have already tried the downgrade package..but it does not work. I can't enable oem unlock since is grayed out ... my boot loader is unlock and I can't use the phone but NFC Bluetooth etc does not work.. I even tried to flash the downgrade package recovery and boot image through fast boot but it's not allow since I can't enable oem unlock...
I'll research a bit and see If I can find something
I tried to use this tool https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108 to rebrand my mate 9 and I was able to unlock my bootloader before I started this tool and no problems there. Next I open the tool and went in and followed all the steps without problems all the way down past rebranding and to the step where I have to unlock my bootloader again. This time, FRP engaged and doesn't let me go past - I am stuck: i cannot reboot into the system to change any settings. At this point I tried a variety of methods, erecovery and funky huawei, they both end up saying getting package info failed. Now I am stuck. I cannot boot into the OS, it just kicks me straight into erecovery and erecovery isn't doing much recovery at all. Any help is greatly appreciated.
Billchen0014 said:
I tried to use this tool https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108 to rebrand my mate 9 and I was able to unlock my bootloader before I started this tool and no problems there. Next I open the tool and went in and followed all the steps without problems all the way down past rebranding and to the step where I have to unlock my bootloader again. This time, FRP engaged and doesn't let me go past - I am stuck: i cannot reboot into the system to change any settings. At this point I tried a variety of methods, erecovery and funky huawei, they both end up saying getting package info failed. Now I am stuck. I cannot boot into the OS, it just kicks me straight into erecovery and erecovery isn't doing much recovery at all. Any help is greatly appreciated.
Click to expand...
Click to collapse
you need to relock bootloader, after it phone is resetting. then you need to unlock it, install TWRP , then you need to reflash a COMPLETE backup from MHA-AL00C00 or MHA-L29C626. Then restore to this. This is the only working solution. maybe i will create a backup from AL00
012345678 said:
you need to relock bootloader, after it phone is resetting. then you need to unlock it, install TWRP , then you need to reflash a COMPLETE backup from MHA-AL00C00 or MHA-L29C626. Then restore to this. This is the only working solution. maybe i will create a backup from AL00
Click to expand...
Click to collapse
the bootloader is locked, or so says the fastboot screen along with FRP which is why i cannot unlock the bootloader to install TWRP...
Need Warning
I think this thread (https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108) should add some warning.
I meet the same problem today.
wingkou said:
I think this thread (https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108) should add some warning.
I meet the same problem today.
Click to expand...
Click to collapse
That makes three of us. I ended up with the same problem after getting to step E in the rebranding. I'm no stuck not being able to unlock my bootloader as it says Phone locked in green and FRP lock in green. OEM unlocking option is greyed out in developer options
before i found a solution i hardbricked my mate 9, but it works for soft bricked mate 9 too https://forum.xda-developers.com/mate-9/help/solution-19-00-fix-hardbricked-huawei-t3750315 i was in the same situation, thats how i fixed it, just follow steps from how to use the DC-phoenix tool with Factory Firmware file, update.app and hw.app
Now I'm in the same situation
After rebranding my Honor View 10 BKL AL20 to BKL L04, it can't boot into system and frp locked oem locked. Erecovery says getting package info failed.
I was trying to flash an oeminfo file from a C432 on to my bln-l24 after flashing Elite 5.1. I mistakenly thought I could rename oeminfo to oeminfo.img and flash with twrp. Well, I did that, and now I have a brick. At first, all I could get to was erecovery, which would fail when I let it do its thing. I've tried to flash B360 back on it using the 3 finger method with no luck. I flashed to MM rollback package, which was successful but still would only boot to erecovery. I flashed the full MM package, which again was successful. However, not it just hangs on the blue honor screen after the boot animation. I can't do anything in fastboot without getting a Command Not Allowed message since I am FRP locked. Any ideas? Hopefully I'm not SOL....Thanks.
Flash boot.img
It's very simple, flash the boot.img of MM or Nougat if that is the one you successfully flashed. It should work. Don't freak out.
Ronedion said:
It's very simple, flash the boot.img of MM or Nougat if that is the one you successfully flashed. It should work. Don't freak out.
Click to expand...
Click to collapse
I can't. Everytime I try to flash something in fastboot, it says command not allowed
Download Huawei Multi Tools by Team MT
Download the above and use it to unbrick your phone ?
Just start your device in bootloader and run "fastboot oem unlock XXXXXXXXXX" with our unlocking code again.
Even if it states to be unlocked on the screen already.
Good luck!
RealParity said:
Just start your device in bootloader and run "fastboot oem unlock XXXXXXXXXX" with our unlocking code again.
Even if it states to be unlocked on the screen already.
Good luck!
Click to expand...
Click to collapse
Tried it, I get Command Not Allowed error message. I think the problem is I'm FRP locked as well, which interferes with a lot of fastboot commands. Thanks for the assistance though.
as you have flashed the OEMINFO of C432, you need to flash the update.app files for BLN-L21C432, available here
https://forum.xda-developers.com/honor-6x/how-to/guide-successful-debranding-to-bln-t3701050
by any chance you are able to access TWRP now?
if the 1st method doesnt work then refer this https://forum.xda-developers.com/honor-6x/how-to/guide-unbrick-bln-l24-rollback-to-b310-t3695154
if not, then on DC Phoenix is your option. you can more info in multi tool thread under Honor 7 section.
Hi, I'm trying to root my Honor 8 device and install TWRP. However when I try to flash the TWRP file in ADB, I get this error message:
FAILED(remote not allowed). I have tried different versions of TWRP, the latest one and the one thats for Honor 8 on their site. I have unlocked bootloader. I don't understand what's happening. Can someone please explain this?
It's my first time rooting a device manually, so i dont know much. If you are able to, please refer to things in an easy manner.
Thanks in advance.
ver1x said:
Hi, I'm trying to root my Honor 8 device and install TWRP. However when I try to flash the TWRP file in ADB, I get this error message:
FAILED(remote not allowed). I have tried different versions of TWRP, the latest one and the one thats for Honor 8 on their site. I have unlocked bootloader. I don't understand what's happening. Can someone please explain this?
It's my first time rooting a device manually, so i dont know much. If you are able to, please refer to things in an easy manner.
Thanks in advance.
Click to expand...
Click to collapse
Is Your Bootloader Unlocked???
And Also This TWRP:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563/page1
Can Only Work For The Honor 8 Android 7
On TWRP Website, The TWRP There Only Works For The Honor In Android 6.
Also When Flashing a recovery Do "fastboot flash recovery [Filename]"
RealFireBlaze20 said:
Is Your Bootloader Unlocked???
And Also This TWRP:
https://forum.xda-developers.com/honor-8/development/twrp-t3566563/page1
Can Only Work For The Honor 8 Android 7
On TWRP Website, The TWRP There Only Works For The Honor In Android 6.
Also When Flashing a recovery Do "fastboot flash recovery [Filename]"
Click to expand...
Click to collapse
Yes i have unlocked the bootloader. I'm pretty sure i've already tried that version of TWRP, but i will try again tomorrow.
I always flash recovery using "fastboot flash recovery (file name)" so that's not the problem.
ver1x said:
Yes i have unlocked the bootloader. I'm pretty sure i've already tried that version of TWRP, but i will try again tomorrow.
I always flash recovery using "fastboot flash recovery (file name)" so that's not the problem.
Click to expand...
Click to collapse
Hmmmm... Okay
RealFireBlaze20 said:
Hmmmm... Okay
Click to expand...
Click to collapse
I think i might have found the problem.
When i go into bootloader it says FRP lock, i've looked around a bit, and i cant seem to figure out what it is and how i can unlock it.
If you know, how?
ver1x said:
I think i might have found the problem.
When i go into bootloader it says FRP lock, i've looked around a bit, and i cant seem to figure out what it is and how i can unlock it.
If you know, how?
Click to expand...
Click to collapse
I had same problem. I successfully unlocked bootloader but after that I accidentally restored default settings in developer settings and oem unlock was ticked off and greyd out. Then I noticed the same FRP lock.
I had to relock and unlock the bootloader. Only after that I was able to flash twrp on my phone.
To relock you type "fastboot oem relock (unlock code)"
After that you can turn on "oem unlock" and "usb debugging"
And yes, It will wipe your data when relocking and again after unlocking so it takes some time. Hope this helps :fingers-crossed:
Juhkimo said:
I had same problem. I successfully unlocked bootloader but after that I accidentally restored default settings in developer settings and oem unlock was ticked off and greyd out. Then I noticed the same FRP lock.
I had to relock and unlock the bootloader. Only after that I was able to flash twrp on my phone.
To relock you type "fastboot oem relock (unlock code)"
After that you can turn on "oem unlock" and "usb debugging"
And yes, It will wipe your data when relocking and again after unlocking so it takes some time. Hope this helps :fingers-crossed:
Click to expand...
Click to collapse
Thanks, i will definetely try this!
Edit: it worked! Thank you so much.
ver1x said:
Thanks, i will definetely try this!
Edit: it worked! Thank you so much.
Click to expand...
Click to collapse
Good to hear that
I can't do it
How am I supposed to get the bootloader code now that Huawei disabled it on their site?
VFR99 said:
How am I supposed to get the bootloader code now that Huawei disabled it on their site?
Click to expand...
Click to collapse
Dc unlocker Progam for pc
I'm gonna keep it simple, here is the scenario:
ROM is corrupted.
Bootloader is unlocked.
FRP lock is on. (fastboot can't do much)
TWRP was flashed back to stock.
Stock hard-reset fails. (even wipe option)
Force upgrade stops at 5% (swear I am using the same one)
eRecovery does not work.
Can't flash. Can't push files.
So what can i do now?
do u have tarp access ?
Ramesh006 said:
do u have tarp access ?
Click to expand...
Click to collapse
No. I'm in stock recovery but can't factory reset. FRP lock
natsusii said:
No. I'm in stock recovery but can't factory reset. FRP lock
Click to expand...
Click to collapse
are you on emui8? can you send me the pic of fastboot? try erecovery.
if u are in emui8 then you need roll back firmware or try to dload as many as roms available for the region you have choosen. still not working? then buy dc unlocker and use dc phonix firmware flasher it will flash stock rom from fastboot even frp is locked.