Hello,sorry for my bad english
I have a mate8 c185b560 rooted and frp is locked and bootloader unlocked in fastboot
I dont have any recovery (stock or twrp)
And i cant instal via adb command because of frp or via dload because i dont have stock recovery
But my phone is alive so what i can do to pass frp lock or instal stock recovery
I try many way and many adb command but i failed because of frp is locked
use dload method to downgrade to interim version from huawei and then dload method to b192, then frp lock is gone, then update again
harryhase said:
use dload method to downgrade to interim version from huawei and then dload method to b192, then frp lock is gone, then update again
Click to expand...
Click to collapse
I cant i donr have stock recovery for dload methode
without any recovery, i have no idea
edit: maybe a little chance.
use twrp APP to flash stock recovery.img on rooted device ..
harryhase said:
without any recovery, i have no idea
edit: maybe a little chance.
use twrp APP to flash stock recovery.img on rooted device ..
Click to expand...
Click to collapse
I try but the same result no recovery
install quick reboot to boot to recovery
harryhase said:
install quick reboot to boot to recovery
Click to expand...
Click to collapse
Same think,device stuck in Device is robooting now
No recovery
harryhase said:
use dload method to downgrade to interim version from huawei and then dload method to b192, then frp lock is gone, then update again
Click to expand...
Click to collapse
Solveee
I was wrong for dload methode recovery stock is not Mandatory
So i rollback to b320 and i update to 321 and 560 and 580 frp is gone
Thnk you sir
I was trying to flash an oeminfo file from a C432 on to my bln-l24 after flashing Elite 5.1. I mistakenly thought I could rename oeminfo to oeminfo.img and flash with twrp. Well, I did that, and now I have a brick. At first, all I could get to was erecovery, which would fail when I let it do its thing. I've tried to flash B360 back on it using the 3 finger method with no luck. I flashed to MM rollback package, which was successful but still would only boot to erecovery. I flashed the full MM package, which again was successful. However, not it just hangs on the blue honor screen after the boot animation. I can't do anything in fastboot without getting a Command Not Allowed message since I am FRP locked. Any ideas? Hopefully I'm not SOL....Thanks.
Flash boot.img
It's very simple, flash the boot.img of MM or Nougat if that is the one you successfully flashed. It should work. Don't freak out.
Ronedion said:
It's very simple, flash the boot.img of MM or Nougat if that is the one you successfully flashed. It should work. Don't freak out.
Click to expand...
Click to collapse
I can't. Everytime I try to flash something in fastboot, it says command not allowed
Download Huawei Multi Tools by Team MT
Download the above and use it to unbrick your phone ?
Just start your device in bootloader and run "fastboot oem unlock XXXXXXXXXX" with our unlocking code again.
Even if it states to be unlocked on the screen already.
Good luck!
RealParity said:
Just start your device in bootloader and run "fastboot oem unlock XXXXXXXXXX" with our unlocking code again.
Even if it states to be unlocked on the screen already.
Good luck!
Click to expand...
Click to collapse
Tried it, I get Command Not Allowed error message. I think the problem is I'm FRP locked as well, which interferes with a lot of fastboot commands. Thanks for the assistance though.
as you have flashed the OEMINFO of C432, you need to flash the update.app files for BLN-L21C432, available here
https://forum.xda-developers.com/honor-6x/how-to/guide-successful-debranding-to-bln-t3701050
by any chance you are able to access TWRP now?
if the 1st method doesnt work then refer this https://forum.xda-developers.com/honor-6x/how-to/guide-unbrick-bln-l24-rollback-to-b310-t3695154
if not, then on DC Phoenix is your option. you can more info in multi tool thread under Honor 7 section.
Hey XDA folks, today I've flashed oreo in l09c10b521 using TWRP and HuRupdater. In this process I've flashed HuRupdate.zip then all three files got flashed, unfortunately I formated data partition and rebooted. After reboot, phone didn't booted until I perform factory reset in stock recovery. Finally phone booted up but no Setup Wizard, no Gapps, only filemanger and some emui apps.
In Dev options OEM unlock option is faded/greyed out. Unable to flash anything in ADB
>> Is there any way so that I can go back to Nougat and use Gapps <<
If its not possible then how can I install Gapps?
Pranav Kumar said:
Hey XDA folks, today I've flashed oreo in l09c10b521 using TWRP and HuRupdater. In this process I've flashed HuRupdate.zip then all three files got flashed, unfortunately I formated data partition and rebooted. After reboot, phone didn't booted until I perform factory reset in stock recovery. Finally phone booted up but no Setup Wizard, no Gapps, only filemanger and some emui apps.
>> Is there any way so that I can go back to Nougat and use Gapps <<
If its not possible then how can I install Gapps?
Click to expand...
Click to collapse
Similar here with some differences. FRP-Locked, Phone unlocked, TWRP previously installed. I Can't install stock recovery because FRP locked. No Gapps, no keyboard, just some Huawei apps. OEM Unlock is grey, but bootloader unlocked.
The same happened to me, this: https://forum.xda-developers.com/honor-8/development/firmware-huawei-honor-8-frd-l09-stock-t3696921 helped to rollback and everything works fine .
MartyWeber28 said:
The same happened to me, this: https://forum.xda-developers.com/honor-8/development/firmware-huawei-honor-8-frd-l09-stock-t3696921 helped to rollback and everything works fine .
Click to expand...
Click to collapse
I've tried dloading vendor(update hw_ru.img) but it failed, then I tried main(update.app) firmware then also failed.
Pranav Kumar said:
I've tried dloading vendor(update hw_ru.img) but it failed, then I tried main(update.app) firmware then also failed.
Click to expand...
Click to collapse
Same here.
First you have to dload the main firmware file, then the renamed vendor.
MartyWeber28 said:
First you have to dload the main firmware file, then the renamed vendor.
Click to expand...
Click to collapse
When you try this method, the bootloader and phone (FRP) in locked state? Or Bootloader unlocked?
My phone is just booting just to Stock recovery, eRecovery or fastboot, but the "OS" won't boot. If I restart, or power on my phone just boot to eRecevery. Now in the fastboot mode the bootloader and FRP in locked state.
All software install failed.
No luck over 5-6 hours. All firmwares I want to flash ended "Software installation failed". In FF I find a B407 rollback package from Oreo, but its still not approved yet
same here, does anyone know how to fix it?
immichao said:
same here, does anyone know how to fix it?
Click to expand...
Click to collapse
Same? Won't booting and just recovery, erecovery or fastboot come up, frp and bootloader locked? Oh, and no luck for flashing any firmware?
I'm affraid, just the B407 rollback package bring back to life, but still not approved yet.
Mumtaz77 said:
Same? Won't booting and just recovery, erecovery or fastboot come up, frp and bootloader locked? Oh, and no luck for flashing any firmware?
I'm affraid, just the B407 rollback package bring back to life, but still not approved yet.
Click to expand...
Click to collapse
actually it boots, but i have an emui without google apps, and a greyed oem unlocking option, so i can't unlock
i ve same issue, frp and bootloader locked. all firmware stop at 5% no gapps and greyed oem setting (c10b521)
I do not know how to find the "magic" firmware that does not fail...
should you understand based on which criterion is installed the firmware, recovery version? version of the system? I have no idea
For locked FRP, you can relock the bootloader and after that unlock again. It unlocks the FRP again. Just write "relock" instead of "unlock".
And about the "not approved" packages, seems that Hurupdater doesn't care, it just installs.
But for some magic firmware, just download some way older firmware for dload installation. For me that always works on my L09C432, is 360.
MysTiCy said:
For locked FRP, you can relock the bootloader and after that unlock again. It unlocks the FRP again. Just write "relock" instead of "unlock".
Click to expand...
Click to collapse
Ok. Just one problem occured for Me: I do a bootloader relock, and this ended a not bootable OS, Relocked Bootloader and locked FRP. Just boot to eRecovery.
MysTiCy said:
But for some magic firmware, just download some way older firmware for dload installation. For me that always works on my L09C432, is 360.
Click to expand...
Click to collapse
Just one problem with this: 360 is not a rollback package, so if you want to refresh (back) to this, just show You an "Installation Failed" message, and nothing more. So 360 just works if you want to refresh from a lower Nougat or MarsMallow build, or "rollback" from a higher build Nougat firmware.
MysTiCy said:
For locked FRP, you can relock the bootloader and after that unlock again. It unlocks the FRP again. Just write "relock" instead of "unlock".
And about the "not approved" packages, seems that Hurupdater doesn't care, it just installs.
But for some magic firmware, just download some way older firmware for dload installation. For me that always works on my L09C432, is 360.
Click to expand...
Click to collapse
I tried and ended with this error
"FAILED (remote: stat not match)
finished. total time: -0.000s"
Mumtaz77 said:
Ok. Just one problem occured for Me: I do a bootloader relock, and this ended a not bootable OS, Relocked Bootloader and locked FRP. Just boot to eRecovery.
Just one problem with this: 360 is not a rollback package, so if you want to refresh (back) to this, just show You an "Installation Failed" message, and nothing more. So 360 just works if you want to refresh from a lower Nougat or MarsMallow build, or "rollback" from a higher build Nougat firmware.
Click to expand...
Click to collapse
You relocked, then unlocked, and it didn't unlock? Strange. I know atleast that the same unlock/relock commands work with nougat and oreo. I've done it a few times.
360 is a full package(FULLOTA-MF-PV) for my model. Other models have different package numbers.
You need to have a full package. Make a folder "dload" on root of an SD-card, with "update.app"-file in it. I have also the "meta-inf" and "full_mainpkg.tag" there, but i don't know if they are really needed. Then just boot the phone with power+volup+voldown and it should install.
No. I relocked the bootloader, but after that and the "automatic" factory reset the phone not boot to the os, just to the erecovery. So i can not change the "OEM unlock" option to unlock again the bootloader.
The install. I'l know the install method, but not work. Any package what 8 want to install ended (after 5%) a "software install failed". Ok. The 360 PV package is a good one, but this package not work, if you want to roll back from a higher master version, like oreo. This package just work if you in nougat, or MM.
Pranav Kumar said:
Hey XDA folks, today I've flashed oreo in l09c10b521 using TWRP and HuRupdater. In this process I've flashed HuRupdate.zip then all three files got flashed, unfortunately I formated data partition and rebooted. After reboot, phone didn't booted until I perform factory reset in stock recovery. Finally phone booted up but no Setup Wizard, no Gapps, only filemanger and some emui apps.
In Dev options OEM unlock option is faded/greyed out. Unable to flash anything in ADB
>> Is there any way so that I can go back to Nougat and use Gapps <<
If its not possible then how can I install Gapps?
Click to expand...
Click to collapse
You must flashing rollback with this method
https://youtu.be/8wH0N2brgTA
Just working with hisuite 5.0.2.300
alimokhtarabadi said:
You must flashing rollback with this method
https://youtu.be/8wH0N2brgTA
Just working with hisuite 5.0.2.300
Click to expand...
Click to collapse
Yes, but it s needed flash recovery patched first...
As long as it boots, yes you can repair. You must ask someone with frp UNLOCK to back up partition 'FRP'. Then they send this partition and you flash it (requires root) and now FRP is good in bootloader.
Sent from my kminiltexx using XDA Labs
hackintosh5 said:
As long as it boots, yes you can repair. You must ask someone with frp UNLOCK to back up partition 'FRP'. Then they send this partition and you flash it (requires root) and now FRP is good in bootloader.
Sent from my kminiltexx using XDA Labs
Click to expand...
Click to collapse
The device starts, but how do I flash the frp partition without root?
Hey what's up.
Having issues and want to start from scratch but the MSM download tool isn't working for me due to driver issues I can't seem to resolve.
I'm unlocked and rooted with a custom kernel but otherwise totally stock.
Would I be able to just fastboot flash the stock boot.img and relock the bootloader for a total data wipe? Would that be enough to start fresh?
Go into magisk. Click uninstall. Click restore images. Your images should have been backup by the app. Reboot and reset from reset option in phone. No need to relock.
Thanks. Is that as good as the MSM tool as data wipes go? Want to get as fresh as I possibly can without MSM...
shadowofdeth said:
Thanks. Is that as good as the MSM tool as data wipes go? Want to get as fresh as I possibly can without MSM...
Click to expand...
Click to collapse
Boot to fastboot,
Code:
fastboot -w
what is the best way to relock the bootloader from Rooted( Magisk) and unlocked bootloader ? I did fastboot lock last time, I guess it locked successfully but refused to boot. Had to use msm to unbrick. Could you suggest best practice for Locking the bootloader again from rooted stock ?
rohanhole said:
what is the best way to relock the bootloader from Rooted( Magisk) and unlocked bootloader ? I did fastboot lock last time, I guess it locked successfully but refused to boot. Had to use msm to unbrick. Could you suggest best practice for Locking the bootloader again from rooted stock ?
Click to expand...
Click to collapse
Don't lock bootloader after rooting
Keinta15 said:
Don't lock bootloader after rooting
Click to expand...
Click to collapse
Then ? Should I unroot and then lock ?
Don't try to lock the bootloader
rohanhole said:
Then ? Should I unroot and then lock ?
Click to expand...
Click to collapse
You can't lock the bootloader while rooted. Your patched boot fails startup checks. The only phone i remember that you could root and relock was the oneplus one. There was a software hack to do a soft bootloader lock/unlock without wiping the data.
To expand on that, if you modified any locked partitions and try to relock the bootloader, you'll essentially soft brick. The only thing you can modify is I believe is userdata. If you are unsure, why take the chance, especially since your MSM isn't working.
Just do a factory reset from recovery lol or use fastboot
My phone suddenly stucked at MIUI logo. I didn't unlock the bootloader on the developer option that's why I can't flash my phone and I don't have any idea how to fix this. Can someone help me ? Please I need some answers and guide.
Try flashing stock in fastboot with MiFlash. If that doesn't work, RMA is the only option left...
Push the volume up button at startup to get into recovery. Then you can reset to factory defaults. That should solve the problem (and delete all your data).
Flixnet said:
Push the volume up button at startup to get into recovery. Then you can reset to factory defaults. That should solve the problem (and delete all your data).
Click to expand...
Click to collapse
Already deleted the data but still won't turn on. Still stucked at MIUI logo.
pnin said:
Try flashing stock in fastboot with MiFlash. If that doesn't work, RMA is the only option left...
Click to expand...
Click to collapse
I don't have access on flashing in fastboot because bootloader not unlock on my phone.
pnin said:
Try flashing stock in fastboot with MiFlash. If that doesn't work, RMA is the only option left...
Click to expand...
Click to collapse
what is RMA btw ?
You only have to unlock to flash a custom rom (or to modify the system). Flashing a original stock rom with the Xiaomi flash tool should also work with a locked bootloader.
RMA: Return Merchandise Authorization. Means to let it repair from the manufacturer or dealer.
Flixnet said:
You only have to unlock to flash a custom rom (or to modify the system). Flashing a original stock rom with the Xiaomi flash tool should also work with a locked bootloader.
RMA: Return Merchandise Authorization. Means to let it repair from the manufacturer or dealer.
Click to expand...
Click to collapse
Been researching for too long and flashing a custom rom is the only way. But the problem is there is no official store of xiaomi here in our place. Is there any third party apps that I can use to unlock the bootloader of my phone ?
Without unlocked bootloader, reset, MiFlash or Poco official service are your only options.
@Flixnet: thanks for clarifying my meanings.