I wiped everything in trwp when I was going to install Lineage, I did the misstake to restart the recovery and now Im stuck in the bootlaoder.
I need to install the stoc firmware via fastboot/bootlaoder but can't find any img file, only zip file of the Stock firmware.
Is is possible to install a zip file via fastboot?
Fastboot recognize the phone when typing the commando fastboot devices, so I see the serial nr.
If I try to install twrp img both on boot and flash recovery commando I get this:
PS C:\Android> fastboot boot twrp-3.2.1-0-enchilada.img
downloading 'boot.img'...
OKAY [ 0.577s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Load Error)
finished. total time: 0.598s
PS C:\Android> fastboot flash recovery twrp-3.2.1-0-enchilada.img
target reported max download size of 536870912 bytes
sending 'recovery' (26748 KB)...
OKAY [ 0.574s]
writing 'recovery'...
FAILED (remote: (recovery_b) No such partition)
finished. total time: 0.579s
I have tried the MsmDownloadTool V4.0, but the deviced manager in windows doesn't find the Qualcom....
@Peterrrrr said:
I wiped everything in trwp when I was going to install Lineage, I did the misstake to restart the recovery and now Im stuck in the bootlaoder.
I need to install the stoc firmware via fastboot/bootlaoder but can't find any img file, only zip file of the Stock firmware.
Is is possible to install a zip file via fastboot?
Fastboot recognize the phone when typing the commando fastboot devices, so I see the serial nr.
If I try to install twrp img both on boot and flash recovery commando I get this:
PS C:\Android> fastboot boot twrp-3.2.1-0-enchilada.img
downloading 'boot.img'...
OKAY [ 0.577s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Load Error)
finished. total time: 0.598s
PS C:\Android> fastboot flash recovery twrp-3.2.1-0-enchilada.img
target reported max download size of 536870912 bytes
sending 'recovery' (26748 KB)...
OKAY [ 0.574s]
writing 'recovery'...
FAILED (remote: (recovery_b) No such partition)
finished. total time: 0.579s
I have tried the MsmDownloadTool V4.0, but the deviced manager in windows doesn't find the Qualcom....
Click to expand...
Click to collapse
I have never tried msmtool, but it sounds like a driver issue. Maybe take a closer look at their instructions
You can try these fastboot flashable stock roms.
You have few options to solve your issue. Now you are in slot B. You can change switch partition to A with fastboot. Try use: fastboot --set-active=a. It will switch to partition A and then try to boot/flash recovery. Also you have try to use fastboot roms with flashall.bat. There are few availaible in forum.
If you would like to use MSM you have to connect phone in proper mode to PC. Power off and hold Vol+ then connect. Also try to install latest Qualcomm drivers.
Msm tool
Download and use msm tool
Related
please help me my i ca'nt flash any stock rom or stock recovery.
flash stock recovery error :
C:\Minimal ADB and Fastboot>fastboot flash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (65536 KB)...
OKAY [ 1.540s]
writing 'recovery'...
FAILED (remote: (recovery_a) No such partition)
finished. total time: 1.556s
flash stock rom :
FAILED (remote: Device already : unlocked!)
finished. total time: 0.003s
error: could not load android-info.txt: Invalid argument
...
FAILED (remote: Device already : unlocked!)
finished. total time: 0.021s
target reported max download size of 536870912 bytes
Invalid sparse file format at header magic
i try use MsmDownloadToolV4.0InternationalVersionOxygenOS5.1 .5 connect my phone to laptop and install OnePlus.QualcomDrivers I do not see my phone information displayed on the tool
current my device unable to boot into recovery and only in quancom fastboot mode
please help me thank a lot
If you are able to put phone in fastboot mode (bootloader), you can follow instructions here:
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
If unable to reboit phone in fastboot then follow instructions here:
https://forum.xda-developers.com/oneplus-6/how-to/guide-mega-unbrick-guide-hard-bricked-t3796051
Gr8man001 said:
If you are able to put phone in fastboot mode (bootloader), you can follow instructions here:
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
If unable to reboit phone in fastboot then follow instructions here:
https://forum.xda-developers.com/oneplus-6/how-to/guide-mega-unbrick-guide-hard-bricked-t3796051
Click to expand...
Click to collapse
my device boot to fastboot mode work
i try flash stock rom from your link error
FAILED (remote: Device already : unlocked!)
finished. total time: 0.003s
error: could not load android-info.txt: Invalid argument
flash witch MsmDownloadToolV4.0InternationalVersionOxygenOS5.1.5
me oneplus driver and install any driver from tool not show COM port
You must not have followed the step correctly to flash rom with fastboot method. I assume you have adb and appropriate drivers installed on your pc. Download the zip file from the link in that thread on your pc. Unzip the file. Put your phone in bootloader mode. Connect the OnePlus 6 to PC; Run flash-all.bat file from the folder where you unzipped the ROM. It worked all the time for me and many others.
https://forum.xda-developers.com/oneplus-6/themes/tool-gsi-installer-2-0-t3803779
try this, it's easy and fast,
I downloaded an OTA and after doing so tried to install twrp and magisk manager, but it would only throw me back into fastboot menu. After trying several different options, such as fastboot flash twrp , the flashing a new boot img etc.
Nothing worked and now i am left with only being able to boot into fastboot menu and i cant access recovery mode either. I;ve tried to flash twrp again but its not working now too.
target reported max download size of 805306368 bytes
sending 'recovery' (98304 KB)...
OKAY [ 2.274s]
writing 'recovery'...
FAILED (remote: (recovery_b) No such partition)
I've tried to do fastboot flash recovery but i get the following error:
Can anyone please help me.
Fixed by running a flashall.bat file
I was wondering if anyone has had any success installing TWRP on the Gome U9?
The bootloader is unlocked and everything appears to be ok when I run the code.
Code:
fastboot flash recovery recovery.img
target reported max download size of 134217728 bytes
sending 'recovery' (23300 KB)...
OKAY [ 7.223s]
writing 'recovery'...
OKAY [ 0.326s]
finished. total time: 7.555s
c:\adb>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 7.207s]
booting...
OKAY [ 0.083s]
finished. total time: 7.298s
But when the phone boots, it just boots normally. If I power off the phone and boot into the options and select 'Recovery', it just shows the standard options. It never boots into TWRP.
first you need to unlock the bootloader, and then install twrp
arsen sx said:
first you need to unlock the bootloader, and then install twrp
Click to expand...
Click to collapse
The bootloader was unlocked. I figured out what was happening and now it's working. If you run 'fastboot reboot' after installing TWRP is falls back to the default recovery. The key is to boot into recovery again after installing TWRP via the Volume Up/Power buttons.
Any link to gome u9 twrp with scatter text
Bakit po nasira GOMEU9 ko
Mod translation: Why is my GOMEU9 broken?
Hey guys,
I recently flashed HAVOC OS on my 1+7 Pro.
I got to TWRP by using the boot command, however now I cannot boot to TWRP. When using the command:
Code:
fastboot flash recovery twrp.img
I get the following error:
Code:
sending 'recovery' (31440 KB)...
OKAY [ 0.697s]
writing 'recovery'...
FAILED (remote: (recovery_b) No such partition)
finished. total time: 0.733s
Then when I try:
Code:
fastboot boot twrp.img
I get the following error:
Code:
downloading 'boot.img'...
OKAY [ 0.698s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.728s
Is anyone able to help?
Why not try installing TWRP via magisk?? Its easier that way
/\ agree /\
:angel:
lawrence_craig said:
Hey guys,
I recently flashed HAVOC OS on my 1+7 Pro.
I got to TWRP by using the boot command, however now I cannot boot to TWRP. When using the command:
Code:
fastboot flash recovery twrp.img
I get the following error:
Code:
sending 'recovery' (31440 KB)...
OKAY [ 0.697s]
writing 'recovery'...
FAILED (remote: (recovery_b) No such partition)
finished. total time: 0.733s
Then when I try:
Code:
fastboot boot twrp.img
I get the following error:
Code:
downloading 'boot.img'...
OKAY [ 0.698s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.728s
Is anyone able to help?
Click to expand...
Click to collapse
Make sure you are using the latest TWRP img.
Never flash recovery. Always boot recovery and then install TWRP zip. Have you not read the instructions?
As others mentioned, easier way to recover TWRP is to flash a magisk patch boot.img and flash TWRP zip in magisk.
Thanks for the tips guys, all sorted!
trying to install twrp,the bootloader is already unlocked.
this is what happens:
fastboot flash recovery recovery.img
target reported max download size of 805263360 bytes
sending 'recovery' (34200 KB)...
OKAY [ 0.728s]
writing 'recovery'...
(bootloader) Invalid partition name recovery
FAILED (remote failure)
finished. total time: 0.841s
fastboot boot recovery twrp.img also give a error
what is the solution ?
neozbr said:
trying to install twrp,the bootloader is already unlocked.
this is what happens:
fastboot flash recovery recovery.img
target reported max download size of 805263360 bytes
sending 'recovery' (34200 KB)...
OKAY [ 0.728s]
writing 'recovery'...
(bootloader) Invalid partition name recovery
FAILED (remote failure)
finished. total time: 0.841s
fastboot boot recovery twrp.img also give a error
what is the solution ?
Click to expand...
Click to collapse
OK:
1. First you need to root the device. Follow this guide. You will use adb to patch the boot.img file of your current firmware.
2. After you have rooted, you can install the unofficial TWRP for Android 10 Moto G8 Plus from here. The zip file will install through magisk. Works fine; I tested it last night.