Related
Hey guys! My phone is now a brick. Can anyone show me how to repair the boot for it? Many thanks.
hungtrauvang said:
Hey guys! My phone is now a brick. Can anyone show me how to repair the boot for it? Many thanks.
Click to expand...
Click to collapse
Flash a new rom
Watch this video...
hungtrauvang said:
Hey guys! My phone is now a brick. Can anyone show me how to repair the boot for it? Many thanks.
Click to expand...
Click to collapse
What happens if you power it on while holding down the up and down buttons?
Frogmanstar said:
What happens if you power it on while holding down the up and down buttons?
Click to expand...
Click to collapse
Nothing happens. Really sad.
hungtrauvang said:
Nothing happens. Really sad.
Click to expand...
Click to collapse
This just means you don't have a recovery.. just flash a new rom.
hi XDA community i have a problem regarding my a850 and i hope u or anybody can reply this comment in an instance cuz im in emergency...
IM EXPLAINING MY PROBLEM VERY DETAILED SO IT'S GONNA BE VERY LONG COMPOSITION, INCLUDING FROM IM ROOTING THE PHONE UNTIL I TYPED THIS COMPOSITION
so recently i "Framarooted" my device and was working properly as i expected,then i want to install TWRP, i see my baseband version does not have ROW or CN in there, it kinda like "A850.V13 ...(cant remember)", but i flashed anyway using the ROW version of TWRP and Mobileuncle MTK Tools. When I want to enter recovery (via MTK Tools) it doesnt show up, just stuck at white,big "Lenovo" logo (it probably doesnt work) but i was able to boot back to normal. Then i used System App Remover from Play and attempted to delete some chinese apps, and I DID a mistake... i was so clumsy enough to delete all chinese apps that origins from the rom i accidently deleted the file "classical" (which i guess the entire system ui, launcher etc) . Upon after deletion of that file I SHOULD HAVE NOT DELETE , it suddenly booted off with the startup sound muted halfway (its like, the boot startup sound have like 4 second duration and i heard the sound just for 1 sec).
Then it boots up again, but stuck at the logo "Lenovo For Those Who Do" after startup animation, so i assume this is bootloop or soft brick
Realising this incident i GOOGLED " a850 bootloop","a850 unbrick","a850 stock rom","a850 emergency reset" and "a850 emergency backup", then I found a website which describes how to flash stock rom to a850, so i did that, as it might work, but actually not for my case. I followed and downloaded exactly steps and files from that website and loaded Flashtool with its scatter file, then ticked PRELOAD and selected the preload.img, followed by checking USB mode ,clicking "Forced High Speed", checked the DA DL thingy, clicked Firmware Upgrade and the progress bar moved, after that i plugged my phone, without battery, to the pc via usb. I heard the hardware insert sound, but, Flashtool did not start flashing, it;'s still SEARCHING.
Then I read that u need the USB drivers, so I assume i do not have drivers for this phone. I used the Device Manager step and when I plug my phone, it pops up "MT65xx Preloader"(or MTK i dont remember) then I quickly rightclick and "Update Driver". It has two selections, ONLINE or BROWSE, so i clicked the online solution, but Windows seems cant find the driver i need,
so i used BROWSE option, which i used your usb driver by entering the directory of the driver in your file in "C:\Users\User\Downloads\Compressed\Lenovo_Drivers_SP_Flash_Tool_v3.1316.0.150\Drivers" clicked install then it pops up an error "The third party INF does not contain digital signature information", so it doesnt install. So I used USBDeview and plugged my phone again without battery, it pops up "MT65xx Preloaded" with a purple dot, and if you need, i rightclicked that purple dot and clicked PROPERTIES, and here's information it gave:
Device Name: MT65xx Preloader
Device Type: CDC Data
Description: MT65xx Preloader
Connected: Yes
Safe to Unplug: NO
Disabled: NO
USB Hub: NO
Drive Letter:*blank
Serial Number:*blank
Created Date: 12/10/2014 2:01:15 AM
Last Plug/Unplug Date:12/10/2014 2:01:15 AM
VendorID: 0e8d
ProductID :2000
Firmware Revision : 1.00
USBClass: 0a
USBSubClass:00
USBProtocol: 00
"Hub Port" until "DeviceMfg" is blank
Power: 500mA
USB Version: 2.00
Driver Description: *blank
Driver Version:*blank
Instance ID: USB\VID_0E8D&PID_2000\5&9ec43f0&0&9
After checked, i resorted to HARD RESET via recovery (i tried to go to recovery again to see there's hope in there) and it BOOTED TO RECOVERY! (yay) but again problem strikes, the recovery I see now is FULLY CHINESE i dont understand even a single option i gave there.
So now my phone condition is still cant boot to launcher, and my very last resort is to use the JTAG option
pls help me u all and pls reply ASAP
thank you
irfanadli97 said:
...clicked install then it pops up an error "The third party INF does not contain digital signature information", so it doesnt install.
Click to expand...
Click to collapse
You should log in to windows with out drivers verification in order to install the drivers. Tutorial on how to do than on windows 8 here. Then flashtool should regognize the phone... (you should fix this problem because you may also need it in the future)
There is also a way to fix your phone (if the classic theme is the problem) using ADB. Go to this page and scroll down to ADB method(tutorial) in order to install the classic.apk as a system apk through ADB.
(i am attaching you the apk: View attachment Theme_classic.apk)
Very thanks though cuz this actually solves my problem on my previous devices which doesn't detect upon connection, but I've actually resorted
to do unsoftbrick by a more professional person in my town (he sells and services phones) and it charged me RM50 ($15). Now my phone is back to normal with a rooted state (Chinese superuser app)
Again thanks for replying.
PS:also can somebody redirect me to lenovo a850 modding page? anybody
irfanadli97 said:
Very thanks though cuz this actually solves my problem on my previous devices which doesn't detect upon connection, but I've actually resorted
to do unsoftbrick by a more professional person in my town (he sells and services phones) and it charged me RM50 ($15). Now my phone is back to normal with a rooted state (Chinese superuser app)
Again thanks for replying.
PS:also can somebody redirect me to lenovo a850 modding page? anybody
Click to expand...
Click to collapse
You did good going to a shop...
What do you mean by "Lenovo a850 modding page"?
u know, where rooted users mod their phone with frameworks, custom roms, installing awesome stuff in theirs'
Sent from my Lenovo A850 using XDA Free mobile app
irfanadli97 said:
u know, where rooted users mod their phone with frameworks, custom roms, installing awesome stuff in theirs'
Sent from my Lenovo A850 using XDA Free mobile app
Click to expand...
Click to collapse
This is such a forum
Tried Installing a custom rom using Flashtool. Now the phone can't come and can't be dected by my pc. Installed the Drivers and they Installed. At first first I was having a Brom Error report Now nothing happens when I p,lug the phone.
It took me days trying to make Doogee send me these files. I managed to unbrick my device with this firmware.
So I decided to post it here so anyone can unbrick ther Y100X.
It must be used with SP Flash Tool, here is the link to the thread: Flash Tool
This is the firmware :laugh: (extract with 7zip): --files removed--
For me it worked with the Format All + Download option.
-The firmware is stock and provided by Doogee. I got nothing to do with the making of the files. I also do not get paid for providing these files. I just wanna help others. -
Link sharing is on now. Sorry for forgetting about this.
thanks for el firmware, now how to get the root ... xD. My smartphone is underway yet, cost me $ 70
Root can be achieved through kingroot. But it is an app I personally hate, so I used some KingRoot to SuperSU apps and they worked,so good luck!
Many thanks for the original Firmware :highfive:
I hope there will upgrade to 5.1 or a dream.
Hello
i got trouble with that Y100X, tried to root it with KingoRoot, then i want to replace Kinguser with SuperSu, after that it ended up in Bootloop (showing DooGee logo then reboots). SP Flash Tool won't start (also tried to find Phone with adb but it always reboot to fast and don't connect)
Any thing i can do?
nickless07 said:
Hello
i got trouble with that Y100X, tried to root it with KingoRoot, then i want to replace Kinguser with SuperSu, after that it ended up in Bootloop (showing DooGee logo then reboots). SP Flash Tool won't start (also tried to find Phone with adb but it always reboot to fast and don't connect)
Any thing i can do?
Click to expand...
Click to collapse
Excuse for machine translation.
Took the information from 4pda.ru on this phone.
I quote: "Yesterday did the same thing, got the same) to the office. Site doogee rocked tools for model valencia 2. Including VCOM driver and flasher. The drivers stood on XP vlёt. Ask insertion of a cap according to the instructions of the threads about Flash Tool. Read the instructions and firmware itself took less time than the jump firmware) So do not be scared) is Ruth will not put. How then do not need to.
Briefly: 1 swing tools here https___drive.google.com/file/d/0B-eEVUUoOlT4QzZwZE54LTVFWms/edit?pli=1
2 swing firmware from the link in the header of the topic and its extract 7zip archiver;
3 Turn off the phone, connect it to a computer, manually set VCOM driver from the archive with the tools, disconnect the phone;
4 launch Flash Tool, look for a file scatter in the folder where you unzipped firmware
5 remove the checkbox PRELOADER
6 click DOWNLOAD, connect the cable to the computer off the phone and wait for the flashing 100%
7 disconnect the phone from the computer, and run the long wait until the turn
8 all
I hope that helps
ps in reference to replace ___ :// - new users can not link
ariss77 said:
Excuse for machine translation.
Took the information from 4pda.ru on this phone.
I quote: "Yesterday did the same thing, got the same) to the office. Site doogee rocked tools for model valencia 2. Including VCOM driver and flasher. The drivers stood on XP vlёt. Ask insertion of a cap according to the instructions of the threads about Flash Tool. Read the instructions and firmware itself took less time than the jump firmware) So do not be scared) is Ruth will not put. How then do not need to.
Briefly: 1 swing tools here https___drive.google.com/file/d/0B-eEVUUoOlT4QzZwZE54LTVFWms/edit?pli=1
2 swing firmware from the link in the header of the topic and its extract 7zip archiver;
3 Turn off the phone, connect it to a computer, manually set VCOM driver from the archive with the tools, disconnect the phone;
4 launch Flash Tool, look for a file scatter in the folder where you unzipped firmware
5 remove the checkbox PRELOADER
6 click DOWNLOAD, connect the cable to the computer off the phone and wait for the flashing 100%
7 disconnect the phone from the computer, and run the long wait until the turn
8 all
I hope that helps
ps in reference to replace ___ :// - new users can not link
Click to expand...
Click to collapse
SP Flashtool don't find phone. All drivers installed. Phone goes in fastboot or stock revocery only.
I wish i could get adb shell :crying:
Is there any way to flash system partition in Fastboot or sideload?
thank you
Hi brother
Thank you very much for the ROM, it help me a lot.
nickless07 said:
SP Flashtool don't find phone. All drivers installed. Phone goes in fastboot or stock revocery only.
I wish i could get adb shell :crying:
Is there any way to flash system partition in Fastboot or sideload?
Click to expand...
Click to collapse
Try to flash without the battery, rather than simply turned off the phone.
You my friend are a saviour.
Tried rooting and bricked my phone, Kingroot wouldn't work so tried the Kingo apk which bricked it.
Back to square one now so will wait for a verified root
Thanks :good::good::good::good::good::good::good:
Hi can with this repair an bootlop on the doogee nova y 100x .when i turnt off the phone ??
Sent from my Valencia2_Y100pro using XDA Free mobile app
Got my mother in law a doogee y100x. Apparently Google plus won't install on it. Did anyone face this? Is there a workaround?
Hi.
I had the bootloop problem, and I've solved with this firmware. (Many thanks TheSpecialNoob)
In order to FlashTool detects the phone, needs to be power off, without enter in FlashTool mode.
Select a scatter file, choose "Format All + Download" and press Download.
Thats all.
Custom recovery Doogee Nova Y100X
By the way, someone has managed to stick a custom recovery??? like the CWM or TWRP. If so, could you explain how you did, or upload the recovery.img file for the FlashTool?.
Thank you
zagzag99 said:
Got my mother in law a doogee y100x. Apparently Google plus won't install on it. Did anyone face this? Is there a workaround?
Click to expand...
Click to collapse
It's a problem on all Y100X devices. Doogee must have messed something up in the build.prop I hope they release an official fix.
Carliv Touch Recovery v3.3 for Doogee Nova Y100X
fanjul said:
By the way, someone has managed to stick a custom recovery??? like the CWM or TWRP. If so, could you explain how you did, or upload the recovery.img file for the FlashTool?.
Thank you
Click to expand...
Click to collapse
I auto-answer.
I found a Russian website, which explain how to install a custom recovery (Carliv Touch Recovery v3.3). :good:
I leave the link to the page. http://4pda.ru/forum/index.php?s=&showtopic=669833&view=findpost&p=42555995
If someone is not able to install it , I can try to explain it.
Also I have kept all the necessary files.
Regards
greetings from Spain
Thanks for giving us the original ROM.
I followed your steps and selecting "Format All + Download" I deleted the imeis and as I have read on the internet, also the NVRAM.
As I can do to permanently leave imeis? every time I have restored the ROM to modify and not know if I deleted more things to do a "Format ALL"
Someone I can pass the "NVRAM.bin" to upload it to my phone? Any other suggestions?
[email protected]
Regards
Yeah, I have the same problem. After restoring the stock rom, I have lost NVRAM settings.
Someone who has not restored the phone to stock, can upload the file nva.bin phone.
Thank you
Hi everyone!
Well guys, sorry to bring this subject on thread again (because this forum has a lot of guides to solve this problem).
But I'm without hope with my phone at this moment.
Let me tell you guys my sad story...
I have an Oneplus 6 since december 2018, and never, NEVER, tried to use any modification on my phone.
I am from Brazil (so sorry for my bad english =] ), and here we CANNOT use Oneplus Support services (I've tried but only received the response "sorry I cannot help you on your country"), so because of this, I've decided to never apply any modification to avoid problems.
This week after a simple reboot my OP6 started with "Qualcomm CrashDump" error and my despair begins.
I'm not able to enter on Fastboot Mode. When I try, the systems attempt to boot (the fastboot mode logo appears) and fall down into crash again.
I'm not able to enter on Recovery Mode either. This method shows nothing, only black screen and after some time the crash screen comes again.
I do not have Bootloader unlocked too.
Any suggestion to use TWRP via fastboot.exe or ADB are useless, because I cant make the connection. At least I think that is impossible because the 'adb devices' command does not find the device.
I followed a lot of guides from XDA to solve my problem, including the Mega Unbrick Thread.
I already downloaded at least 8 different versions of msmdownloadtool in consecutive attempts of unbrick my phone. Nothing really helps.
The most weird situation is that msmDownlodTool can finish the proccess with success. The driver installation is working... everything seens OK using the tool but my phone does not revive
Someone have a suggestion for me?
Any suggestion, tool or alternative method is welcome in my actual situation.
Sorry if I posted at wrong local, just tell me and I can fix if necessary.
Thanks in advance to all of you guys.
Did you try msm download tool? If not, nead that thread and good luck
whizeguy said:
Did you try msm download tool? If not, nead that thread and good luck
Click to expand...
Click to collapse
Hi!
Thanks for your reply, but I think you do not read my entire post
As I said, i've already tried at least 8 different versions of msmDownloadTool.
If you have any other suggestion, I'll appreciate.
so you can't boot into fastbootmode anymore?
Had the same problem once before and solved it by flashing the correct twrp by fastboot
EarthquakeXS said:
so you can't boot into fastbootmode anymore?
Had the same problem once before and solved it by flashing the correct twrp by fastboot
Click to expand...
Click to collapse
Yes, I am unable to enter into Fastboot Mode.
When I try, the logo saying "fastboot" appears, but after 4 seconds, the systems stucks on CrashDump error screen again.
That way my PC cannot find my phone with ADB or FASTBOOT commands.
The only tool that works is msmDownloadTool, but even with a success run with that tool, my system does not start and stills under CrashDump error.
I was thinking if exists some version of msmDownloadTool that justs restore the fastboot and unlock bootloader with brute force.
Thats my last hope
hello. heres what u need to do. download miracle kraked version. hold volume+ and - key simultaneously.
go to device manager in pc. look for port expand it and u should see qualcomm Qloader.
now use miracle under qualcomm tab select patch and flash!!
sanaulla jauhar said:
hello. heres what u need to do. download miracle kraked version. hold volume+ and - key simultaneously.
go to device manager in pc. look for port expand it and u should see qualcomm Qloader.
now use miracle under qualcomm tab select patch and flash!!
Click to expand...
Click to collapse
Hi!
Can you please provide some link to this tool?
Thanks for your help!
mikesmarcos said:
Hi everyone!
Well guys, sorry to bring this subject on thread again (because this forum has a lot of guides to solve this problem).
But I'm without hope with my phone at this moment.
Let me tell you guys my sad story...
I have an Oneplus 6 since december 2018, and never, NEVER, tried to use any modification on my phone.
I am from Brazil (so sorry for my bad english =] ), and here we CANNOT use Oneplus Support services (I've tried but only received the response "sorry I cannot help you on your country"), so because of this, I've decided to never apply any modification to avoid problems.
This week after a simple reboot my OP6 started with "Qualcomm CrashDump" error and my despair begins.
I'm not able to enter on Fastboot Mode. When I try, the systems attempt to boot (the fastboot mode logo appears) and fall down into crash again.
I'm not able to enter on Recovery Mode either. This method shows nothing, only black screen and after some time the crash screen comes again.
I do not have Bootloader unlocked too.
Any suggestion to use TWRP via fastboot.exe or ADB are useless, because I cant make the connection. At least I think that is impossible because the 'adb devices' command does not find the device.
I followed a lot of guides from XDA to solve my problem, including the Mega Unbrick Thread.
I already downloaded at least 8 different versions of msmdownloadtool in consecutive attempts of unbrick my phone. Nothing really helps.
The most weird situation is that msmDownlodTool can finish the proccess with success. The driver installation is working... everything seens OK using the tool but my phone does not revive
Someone have a suggestion for me?
Any suggestion, tool or alternative method is welcome in my actual situation.
Sorry if I posted at wrong local, just tell me and I can fix if necessary.
Thanks in advance to all of you guys.
Click to expand...
Click to collapse
Hi there ! I am experiencing a similar issue on the same device. Did you manage to fix it ?
Hi dude are u here ? i will help u
Try this
Rhach1d237 said:
Hi there ! I am experiencing a similar issue on the same device. Did you manage to fix it ?
Click to expand...
Click to collapse
Source is a videotutorial. google oneplus 6 hardbrick and click the video of Max Lee
(it worked for me)
the download takes an awful lot of time
first get your phone into qualcomm download mode by holding down volume up + power button and plug your device in your PC.
(first unzip the hardbrick zip folder) then the oneplus 6 folder and than the .exe file and click 'start' if it detects your phone.
That is flashing every chip and Hydrogen OS 5.whatever.3 but that is not important. Your phone should boot and than you can install Oxygen OS with android 10(thats the other zip folder) using the local upgrade feature.
(make sure to enable google play services after upgrade from hydrogen OS)
Hope it will work for you too if you haven't tried it already.
Hi, first off all i dont speak english very well.
I have a problem with phone i was stuck in bootloop and i tried to use twrp to restore sytem but i chose bad parition (boot, system and system image) those 3 and now i cant do anything. Only fastboot mode working. Pls guys can u help me. I was trying to use windows powershell to do sth but i cant run twrp image and now i dont know what to do. I have a nandroid backup on phone and on computer pls, can u help me???
I try to use qualcom brick tool but in device manager my device shows up us android bootloader interface
Possible solution
I had a problem where I softbricked my op6 by restoring an old system backup through twrp. My phone was stuck in fastboot mode. I was able to turn it off only when it wasn't connected to a pc or a charger.
https://forum.xda-developers.com/oneplus-6/how-to/rom-stock-fastboot-roms-oneplus-6-t3796665
It basically flashes everything you need onto your device. Your phone should be back to bone stock conditions software-wise after that
Download this
To unbrick your smartphone start the MSM Tool as Administrator. Turn off your phone and hold the volume up button and connect your phone to the computer. When you have done this, your phone should be recognized and flashed with the first ROM. Enclosed you find the Android P Rom as zip.
Download "https://1drv.ms/u/s!ApkcnumxOqfvhMBCFw0hvELIxADoNA"
Note: I accept no liability for failure and or possible damage
R4D0WS said:
To unbrick your smartphone start the MSM Tool as Administrator. Turn off your phone and hold the volume up button and connect your phone to the computer. When you have done this, your phone should be recognized and flashed with the first ROM. Enclosed you find the Android P Rom as zip.
Download "https://1drv.ms/u/s!ApkcnumxOqfvhMBCFw0hvELIxADoNA"
Note: I accept no liability for failure and or possible damage
Click to expand...
Click to collapse
I would recommend doing this operation, OP. For more reference, here's an XDA thread that talks all about recovering from Hard and Soft bricks using the MSM tool:
https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
HighOnLinux said:
I would recommend doing this operation, OP. For more reference, here's an XDA thread that talks all about recovering from Hard and Soft bricks using the MSM tool:
https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
Click to expand...
Click to collapse
It´s the same one , but i have added the newest update in the .zip file.
Thanks for help guys, I used "MsmDownloadTool V4.0 International" and it solved my problem but i lost lots of data. There is a thread at xda forum, so if somebody have this problem too, you can use it but it's the last possible method to unbrick phone and you will lose everything what's was in your phone.
Tried to root Tecno Spark 5 pro (KD7) with magisk and after unlocking bootloader everything was working smoothly until i rebooted with the patched magisk image and now its stuck in bootloop.
Pressing power button and volume up to access boot menu doesn't work nor does connecting it to pc and trying to use adb shell.
I thought maybe the solution would be to try to let it run our of battery and try again but that will take a hell of a long time.
PLEASE!!! If there is any help or suggestions just let me know. Its a brand new phone as well ****
vanc5 said:
Tried to root Tecno Spark 5 pro (KD7) with magisk and after unlocking bootloader everything was working smoothly until i rebooted with the patched magisk image and now its stuck in bootloop.
Pressing power button and volume up to access boot menu doesn't work nor does connecting it to pc and trying to use adb shell.
I thought maybe the solution would be to try to let it run our of battery and try again but that will take a hell of a long time.
PLEASE!!! If there is any help or suggestions just let me know. Its a brand new phone as well ****
Click to expand...
Click to collapse
Hint: Add Tecno Spark 5 pro (KD7) to this thread's title thus mainly owners of such device get addressed.
can you access fastboot?
no it just keeps looping back to the android start and turns off:
it displays:
orange state
your device has been unlocked and cant be trusted
your device will boot in 5 seconds
then it turns off and repeats
ineedroot69 said:
can you access fastboot
Click to expand...
Click to collapse
vanc5 said:
no it just keeps looping back to the android start and turns off:
it displays:
orange state
your device has been unlocked and cant be trusted
your device will boot in 5 seconds
then it turns off and repeats
Click to expand...
Click to collapse
Do you know how to access fastboot on your device?
Sometimes in life the most simple task are the hardest one when you are in distress
ineedroot69 said:
Do you know how to access fastboot on your device?
Sometimes in life the most simple task are the hardest one when you are in distress
Click to expand...
Click to collapse
Yeah, i accessed the fastboot to load the patched img file and then fastboot rebooted and it just got stuck in the loop
vanc5 said:
Tried to root Tecno Spark 5 pro (KD7) with magisk and after unlocking bootloader everything was working smoothly until i rebooted with the patched magisk image and now its stuck in bootloop.
Pressing power button and volume up to access boot menu doesn't work nor does connecting it to pc and trying to use adb shell.
I thought maybe the solution would be to try to let it run our of battery and try again but that will take a hell of a long time.
PLEASE!!! If there is any help or suggestions just let me know. Its a brand new phone as well ****
Click to expand...
Click to collapse
This tutorial linked here fixed mine (also tecno spark 5 pro, mediatek 6765). my phone was also in orange state bootloop. exactly as you describe.
https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/
i had to slightly modify the instructions to suit the spark 5 pro. the only necessary changes are this
uninstall all usb vcom drivers you may have previously installed
FOLLOW THE TUTORIAL TILL YOU GET to where you have to download the bypass utility and exploits collection. please download the one with the mega link (ie Bypass utility compiled)
CONTINUE WITH THE TUTORIAL TILL YOU GET TO FLASHING FIRMWARE. here too my method deviated from the tutorial. even though my phone was detected as com9 by the bypass uility, i could not choose it in UART mode in sp flash tools. So just use usb mode in sp flash tools and it would still work.
CONTINUE WITH THE TUTORIAL. no need to load an authentication file. just load the scatter file and use "Download only" method
if you do this well your phone will be revived!
ptetteh227 said:
This tutorial linked here fixed mine (also tecno spark 5 pro, mediatek 6765). my phone was also in orange state bootloop. exactly as you describe. https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/ i had to slightly modify the instructions to suit the spark 5 pro. the only necessary changes are this
uninstall all usb vcom drivers you may have previously installed
FOLLOW THE TUTORIAL TILL YOU GET to where you have to download the bypass utility and exploits collection. please download the one with the mega link (ie Bypass utility compiled)
CONTINUE WITH THE TUTORIAL TILL YOU GET TO FLASHING FIRMWARE. here too my method deviated from the tutorial. even though my phone was detected as com9 by the bypass uility, i could not choose it in UART mode in sp flash tools. So just use usb mode in sp flash tools and it would still work.
CONTINUE WITH THE TUTORIAL. no need to load an authentication file. just load the scatter file and use "Download only" method
if you do this well your phone will be revived!
Click to expand...
Click to collapse
ptetteh227 said:
This tutorial linked here fixed mine (also tecno spark 5 pro, mediatek 6765). my phone was also in orange state bootloop. exactly as you describe. https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/ i had to slightly modify the instructions to suit the spark 5 pro. the only necessary changes are this
uninstall all usb vcom drivers you may have previously installed
FOLLOW THE TUTORIAL TILL YOU GET to where you have to download the bypass utility and exploits collection. please download the one with the mega link (ie Bypass utility compiled)
CONTINUE WITH THE TUTORIAL TILL YOU GET TO FLASHING FIRMWARE. here too my method deviated from the tutorial. even though my phone was detected as com9 by the bypass uility, i could not choose it in UART mode in sp flash tools. So just use usb mode in sp flash tools and it would still work.
CONTINUE WITH THE TUTORIAL. no need to load an authentication file. just load the scatter file and use "Download only" method
if you do this well your phone will be revived!
Click to expand...
Click to collapse
ptetteh227 said:
This tutorial linked here fixed mine (also tecno spark 5 pro, mediatek 6765). my phone was also in orange state bootloop. exactly as you describe.
https://forum.xda-developers.com/t/repair-dead-hard-bricked-realme-3-3i-tutorial.4224255/
i had to slightly modify the instructions to suit the spark 5 pro. the only necessary changes are this
uninstall all usb vcom drivers you may have previously installed
FOLLOW THE TUTORIAL TILL YOU GET to where you have to download the bypass utility and exploits collection. please download the one with the mega link (ie Bypass utility compiled)
CONTINUE WITH THE TUTORIAL TILL YOU GET TO FLASHING FIRMWARE. here too my method deviated from the tutorial. even though my phone was detected as com9 by the bypass uility, i could not choose it in UART mode in sp flash tools. So just use usb mode in sp flash tools and it would still work.
CONTINUE WITH THE TUTORIAL. no need to load an authentication file. just load the scatter file and use "Download only" method
if you do this well your phone will be revive
Click to expand...
Click to collapse
How were you able to switch off your phone,which button combination worked?i have all the necessary things but i can't install the stock rom with sp-flashtool since its still stuck in bootloop and the phone must be completely off for the installation process
anger-Fist said:
How were you able to switch off your phone,which button combination worked?i have all the necessary things but i can't install the stock rom with sp-flashtool since its still stuck in bootloop and the phone must be completely off for the installation process
Click to expand...
Click to collapse
The phone doesn't need to be completely off. allow it to bootloop.
Just follow the process in the tutorial linked to and you should
be fine.
by the way am assuming your bootloader is already unlocked.
please send the link to download the auth file good sir
anger-Fist said:
please send the link to download the auth file good sir
Click to expand...
Click to collapse
what smartphone are you using?
what is the operating system of your computer? windows or linux?
so far what have you done?
if you are using a spark 5 pro, you don' t need an auth file. I revived mine without an auth file.
I looks like i would have to write a detailed step-by-step guide on how it worked for me
i followed the steps to the letter but gives me errors everytime
if you found mediatek driver for mt67xx or the one you used can you send me please,i've searched for it and keep finding for mt65xx
ptetteh227 said:
what smartphone are you using?
what is the operating system of your computer? windows or linux?
so far what have you done?
if you are using a spark 5 pro, you don' t need an auth file. I revived mine without an auth file.
I looks like i would have to write a detailed step-by-step guide onu how it worked for me
Click to expand...
Click to collapse
windows 10
tecno spark 5 pro 4gb ram/ 128gb rom firmware no. KD7-H6211FQRSTU-Q-GL-210520V392
anger-Fist said:
i followed the steps to the letter but gives me errors everytime
Click to expand...
Click to collapse
please send a screenshot of the command prompt after you run the command just In case of any errors (i saw a traceback error in one of the screenshots). you must run the command prompt as administrator
anger-Fist said:
if you found mediatek driver for mt67xx or the one you used can you send me please,i've searched for it and keep finding for mt65xx
Click to expand...
Click to collapse
you don't need one. I didn't use one
ptetteh227 said:
you don't need one. I didn't use one
Click to expand...
Click to collapse
if your tecno spark 5 pro is same as mine(4gb ram/128gb rom) can you send me the link you to download the firmware and da file please
vanc5 said:
Tried to root Tecno Spark 5 pro (KD7) with magisk and after unlocking bootloader everything was working smoothly until i rebooted with the patched magisk image and now its stuck in bootloop.
Pressing power button and volume up to access boot menu doesn't work nor does connecting it to pc and trying to use adb shell.
I thought maybe the solution would be to try to let it run our of battery and try again but that will take a hell of a long time.
PLEASE!!! If there is any help or suggestions just let me know. Its a brand new phone as well ****
Click to expand...
Click to collapse
work for kd7 tecno
new post
vanc5 said:
Tried to root Tecno Spark 5 pro (KD7) with magisk and after unlocking bootloader everything was working smoothly until i rebooted with the patched magisk image and now its stuck in bootloop.
Pressing power button and volume up to access boot menu doesn't work nor does connecting it to pc and trying to use adb shell.
I thought maybe the solution would be to try to let it run our of battery and try again but that will take a hell of a long time.
PLEASE!!! If there is any help or suggestions just let me know. Its a brand new phone as well ****
Click to expand...
Click to collapse
work my kd7 twrp recovery and root
new post