Related
Hey guys,
So over the weekend I hacked my original Droid and put Cyanogenmod 7 on it (the stable one). Now I'm trying to get the WiFi Tether app working. I downloaded and installed the WiFi Tether beta found off the Google site (I can't post a direct link since I dont have the 8 post requirement). I set up the SSID name and a WEP password, but it's not broadcasting. Neither me nor my roommate can see it. I even tried connecting to it manually through my laptop just incase the SSID wasn't being broadcasted for whatever reason, but no luck there. I looked through the settings and it literally looks like there isn't much to set up. I was wondering why this is happening? I'm rooted.
When I pressed edit under the menu, then under settings and selected "(Re)-Install binaries/configs", I received the following error: "Couldn't install file - /data/data/com.googlecode.android.wifi.tether/bin/dnsmasq!" I fixed it by stopping the tether and then clicking it again, it said the install was successful. I'm on a Windows 7 machine, my roommate is on a Mac. Neither of us could see the SSID being broadcast even after I installed the binaries/configs.
Someone recommended I try Barnacle. I did, and same result. No errors or red flags, says it's broadcasting, and neither of us can see it. I hardly doubt this is an operating system issue, I believe something's not going right in the apps.
Edit: This is the Galaxy Tab 7 Plus 4G w/ TMobile...
So far I am loving it. I have had a plethora of Android tablets, including the Galaxy Tab 10.1 (until yesterday), and the original 7" Tab. Here is an issue I have not run into thus far...
Issue 1: I like my brightness settings to be %100 all the time. I always (almost) have a power cable with me, so I'm not worried about the drain. I have the auto setting turned off as to keep it from adjusting on it's own. However, everytime I open the status menu with the brightness slider, it is down to about %90-%95. I can't get it to stay on full. Also, and even more annoying, every time I open the browser, the brightness drops to like %30'ish and I have to open the status menu and slide it back up. The browser is where I REALLY need the full brightness the most, and it's the biggest issue.
I noticed this out of the box, adjusted settings, nogo, so I factory reset, and same issue. This is leading me to believe this is just a setting or something I am missing. Any ideas?
Issue 2 (THE BIG ONE): This Tab 7+ can't see my work wifi. It connects to my wifi at home just fine (did last night at least), which is also WPA, but it doesn't even see the one at work. It acts like it isn't there. In fact, and this is probably important, it is not seeing any networks up here, and there are at least 10-15 that should be visible from my location in the building (all but a couple from other companies). My G2x (Android 2.3) is connected to my work wifi just fine, and it sees all the others around us, the the Tab 7+ right next to it sees none. I also turned on the wifi router on my phone, it will not see that one either. I've verified the wireless is enabled, as well as turning it off and on multiple times and many reboots, nogo... I need it to hit the wifi at work and home so it isn't sucking my 4G data, so this is a big issue for me.Any ideas? I'm at a loss...
Also, to answer before it's asked: Nope, it's not rooted. I may do this at some point (as I do most of my devices), but for the moment I want to leave it stock and not mess with it. These issues seem like they should be resolved/nonexistant in the stock ROM, so I shouldn't have to root to fix them. Please tell me if this is incorrect...
Thanks for any help, sorry for the long post...
(pardon typos, I'm at work and multitasking, no time to proofread)
on the brightness broweer tip. use a different browser. its a known issue that the stock browser automaticaly dims the screen.
otamctech said:
on the brightness broweer tip. use a different browser. its a known issue that the stock browser automaticaly dims the screen.
Click to expand...
Click to collapse
Thank you... You're right, it doesn't happen in Dolphin, however I am one of those weird people the really prefers the stock browser...
The biggest issue is the wifi not showing up. I am updating that issue with more info now...
what channel is the wireless network on? i had a similar problem on my windows laptop, it cannot see the wifi.. turned out that my wireless card(the driver actually) cannot see any wireless network beyond channel 12.. who knows you're having the same problem, might worth checking.
gingerboy92 said:
what channel is the wireless network on? i had a similar problem on my windows laptop, it cannot see the wifi.. turned out that my wireless card(the driver actually) cannot see any wireless network beyond channel 12.. who knows you're having the same problem, might worth checking.
Click to expand...
Click to collapse
Ours is on 6... Thanks though
for me it was the opposite, it could see my home wifi, but not my work.
only was to solve it was to setup a static ip at work for the GT7...
I called samsung, they said its a problem with some routers. No eta on fix other than static IP.
Shftup said:
for me it was the opposite, it could see my home wifi, but not my work.
only was to solve it was to setup a static ip at work for the GT7...
I called samsung, they said its a problem with some routers. No eta on fix other than static IP.
Click to expand...
Click to collapse
........
Just to chime in - I also have the same problem connecting to my work wireless network but I think because it uses a SEPARATE authentication scheme.
The way my office WLAN work is like this:
1). Connect to the WLAN with SSID "Office", no encryption password required
2). Once the Tab is connected, it WILL receive an IP address
3). Open up a browser (Dolphin, etc.) and try to go to any website (Google, etc.)
4). Instead of going to the website I typed in in no. 3, an authentication page will show up
5). I need to enter my Windows AD account and password
6). If its successful, then I can start browsing the Internet (but not going to the Internal network, that requires VPN access).
Step 3 is where the Tab FAILED to do so. It just doesn't want to get redirected to the authentication page.
lanwarrior said:
Just to chime in - I also have the same problem connecting to my work wireless network but I think because it uses a SEPARATE authentication scheme.
The way my office WLAN work is like this:
1). Connect to the WLAN with SSID "Office", no encryption password required
2). Once the Tab is connected, it WILL receive an IP address
3). Open up a browser (Dolphin, etc.) and try to go to any website (Google, etc.)
4). Instead of going to the website I typed in in no. 3, an authentication page will show up
5). I need to enter my Windows AD account and password
6). If its successful, then I can start browsing the Internet (but not going to the Internal network, that requires VPN access).
Step 3 is where the Tab FAILED to do so. It just doesn't want to get redirected to the authentication page.
Click to expand...
Click to collapse
Yep, same way for me at work. OP did you try to manually add the wireless info vs letting the tab "find" the access point?
lanwarrior said:
Just to chime in - I also have the same problem connecting to my work wireless network but I think because it uses a SEPARATE authentication scheme.
The way my office WLAN work is like this:
1). Connect to the WLAN with SSID "Office", no encryption password required
2). Once the Tab is connected, it WILL receive an IP address
3). Open up a browser (Dolphin, etc.) and try to go to any website (Google, etc.)
4). Instead of going to the website I typed in in no. 3, an authentication page will show up
5). I need to enter my Windows AD account and password
6). If its successful, then I can start browsing the Internet (but not going to the Internal network, that requires VPN access).
Step 3 is where the Tab FAILED to do so. It just doesn't want to get redirected to the authentication page.
Click to expand...
Click to collapse
One of the ones we have at work is the same, but not the one I primarily use. That is my backup lol...
otamctech said:
Yep, same way for me at work. OP did you try to manually add the wireless info vs letting the tab "find" the access point?
Click to expand...
Click to collapse
I did, nogo...
Also, here is a strange thing. About 2 hours ago it notified me there were wireless networks in range, and then showed me 2 random networks from another office. Suddenly, it saw nothing again. Then about 5 minutes ago, while I was in the bathroom ( ), it suddenly showed me ALL of the surrounding networks. Yay! I tried to connect to the one I use, it took my password, but never even attempted to connect. Then, they are gone. Now it doesn't see them.
What. The. Fuuuudge.
After I updated my sprint galaxy s6 edge to marshmallow OTA, VPN is not working for me. I have tried more than 5 different VPN apps, but none of them work. They say they are connected, but as soon as I switch to a new app, they stop working. VPN worked fine before I updated, but now it is not. Please help!
Yoshi20017 said:
After I updated my sprint galaxy s6 edge to marshmallow OTA, VPN is not working for me. I have tried more than 5 different VPN apps, but none of them work. They say they are connected, but as soon as I switch to a new app, they stop working. VPN worked fine before I updated, but now it is not. Please help!
Click to expand...
Click to collapse
I've got this problem too, on chinese 9250
Go to Settings > More > VPN
Set up your VPN in there. I've set up VPN on my Galaxy S6 and S7 using L2TP IPSec with a signed certificate from GoDaddy.
I had it working on the S7 with a PSK also. Both phones are running Android v 6.0.1 Marshmallow.
It's strange but the VPN connection settings are different. My S6 is a Sprint phone, and I can't assign it a Certificate Authority. But the Verizon S7 won't let me save the VPN connection without a CA. I have to install the certificates in different ways for each phone as well. Very odd.
Anyway good luck.
MrKrunch said:
Go to Settings > More > VPN
Set up your VPN in there. I've set up VPN on my Galaxy S6 and S7 using L2TP IPSec with a signed certificate from GoDaddy.
I had it working on the S7 with a PSK also. Both phones are running Android v 6.0.1 Marshmallow.
It's strange but the VPN connection settings are different. My S6 is a Sprint phone, and I can't assign it a Certificate Authority. But the Verizon S7 won't let me save the VPN connection without a CA. I have to install the certificates in different ways for each phone as well. Very odd.
Anyway good luck.
Click to expand...
Click to collapse
Could you tell me how to do this please?
same problem for me Samsung s6 edge android 6..0.1 VPN apps work.... cyberghost / opera max/ and the rest .
PS after Zamber88 suggestion go to settings>> battery>app power saving > turn off for opera max or other vpn app.
PPS: if that is not enough do this: Settings >>Battery >> Battery Usage >> more (right up cornet button) >> Optimize battery usage >> select All apps and choose your VPN app and turn off .
also if in OPERA MAX when u use mobile data u get the error "enable background data " is because of the power saving.
CASE CLOSE !
That's a really strange issue. We did a lot of testing on MM with Nexus devices and everything works as intended. We even have a S6 Edge with MM that works fine (SM-G925F with one of the Unknown build listed on sammobile IIRC).
All I can come out with now is that you could try checking if there aren't any battery saving features interfering with the VPN apps.
Solved.
S6 edge.. disabled powersaving features. Vpns are working fine. Strange but cant figure out how powersaving is meddling with vpn. Solved.
Its not power saving . its restrict background data . just off the restrict background data and will work fine
zamber88 said:
That's a really strange issue. We did a lot of testing on MM with Nexus devices and everything works as intended. We even have a S6 Edge with MM that works fine (SM-G925F with one of the Unknown build listed on sammobile IIRC).
All I can come out with now is that you could try checking if there aren't any battery saving features interfering with the VPN apps.
Click to expand...
Click to collapse
I'm not sure if anyone can help me over here, but I'm not finding anything in the Nexus forums. Since @zamber88 did MM testing with Nexus, maybe you can help me with my Nexus 6. I have a 10 day trip to China coming up in a couple weeks and really need to get VPN working.
Google searches haven't helped, except to point me here. I have purchased VPN Unlimited and tried it with their app and an OpenVPN app. I got a free Galaxy J7 as a spare through the T-Mobile promotion a while back, and both apps work on it with no changes at all. Neither work on my Nexus 6, despite turning off power saving and restricting background data for both apps.
When I select a server, the J7 the Allow connection pops up, I OK it, and connect. On my Nexus 6, the refused to grant permission pops up. See the attached screenshots.
Any help would be greatly appreciated.
JimSmith94 said:
I'm not sure if anyone can help me over here, but I'm not finding anything in the Nexus forums. Since @zamber88 did MM testing with Nexus, maybe you can help me with my Nexus 6. I have a 10 day trip to China coming up in a couple weeks and really need to get VPN working.
Google searches haven't helped, except to point me here. I have purchased VPN Unlimited and tried it with their app and an OpenVPN app. I got a free Galaxy J7 as a spare through the T-Mobile promotion a while back, and both apps work on it with no changes at all. Neither work on my Nexus 6, despite turning off power saving and restricting background data for both apps.
When I select a server, the J7 the Allow connection pops up, I OK it, and connect. On my Nexus 6, the refused to grant permission pops up. See the attached screenshots.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I'll try to cover all of the bases from easiest to most cumbersome. Given you have some time on your hands this should helpful. Read through the list before doing anything and once you start doing stuff note it down as you're going so that we'll be able to pinpoint any other problems that could pop up. If you succeed then you'll have an answer pretty much ready for posting .
Reboot. Sometimes freshly installed VPN apps fail exactly like the screenshots show.
Try setting up a VPN connection with another app. Shameless plug: Opera Max, Opera VPN (note: there's an issue in Max which makes some VPNs disconnect after a couple of minutes so make sure to kill it before running any other VPNs).
Scan the device with Avast, AVG and Avira to rule out any worms.
Rule out any other apps interfering by booting into safe mode and try connecting again (with your app and, Opera Max for a sanity check).
If you don't want to commit to steps that will follow (or the step before this one succeeded) remove apps from least to most needed retesting with your app and Max after each uninstall.
Upgrade to Android Nugat. It shouldn't break anything and could potentially fix this issue. Either ways it's always a good idea to upgrade when updates are available. It's not like you're on iOS .
Now it's a god time to make a backup (frankly, anytime is good for a backup). If you went over with uninstalling apps making one will be easier. If you have root on your device you probably have TWRP, make a backup with it and download it to your PC. You could also make a Titanium backup if you're not big on setting up basic apps but it's optional. If you don't have root just backup all sensitive data (photos, videos, settings if it's possible to export these in-app). Also note down all apps you can't live without. Google Play has a history of installed apps but going through it is a pain and the "Copy settings from another device" option when setting up a fresh device is helpful but will not restore in-app settings. Also I would advise to not use it given that the culprit can sill be lurking in your apps.
MAKE THAT BACKUP, there's no going back from here . Do a factory reset. After that as mentioned before don't restore settings and set up a "new" device. Set up your accounts and check if both VPN apps work (they should by this point). Now start installing your basic app setup and after configuring each one make sure that the VPN still works.
If somehow this didn't help make sure you're not running a ROM that's botched by flashing the official system image (and upgrade to Nugat as a bonus). If you know what I'm talking about then you will know how to do it, if you don't know AND the issue still reproduces the there's something really strange going on.
By now you should have your issue solved, hopefully in the first three steps at most. There's one other thing to take into account. The great firewall does not like VPNs and there's a fair chance that Unlimited VPN will not work so be prepped to have a backup plan. You could try with Opera VPN (no idea if it works, not my project, would be nice to get feedback) and also get a trial for any service that looks interesting to you on this list.
Hope this helps and that you'll have a safe trip .
UPDATED minutes after posting:
One simple step I missed: reboot. In most cases it solves exactly the issue you're having. No idea why it happens but probably there's a 2y bug opened and tagged as low prio in the Android project .
Thanks for the quick reply!
1. Besides VPN Unlimited, I've already tried OpenVPN for Android and OpenVPN Connect. They both use .ovpn files from VPN Unlimited. I just installed Opera VPN and whether I swipe through the intro screens or skip them, I can't click on "GOT IT"; nothing happens. I think this might be the crux of the problem as some of the buttons in the other VPN apps don't respond either. I'm "almost" positive it's not a screen overlay problem because I used to use f.lux that did that, got rid of it, and haven't had any problems since.
2. I run Lookout Security & Antivirus and just scanned again to be sure. Nothing found.
3. I tried safe mode earlier, only to learn that you can't install or run any aftermarket apps.
4-7. Nougat hasn't been released yet and I'm too dependent on systemless root and Xposed, I'm still stock rooted on MM 6.0.1 with the September security update. I do run TWRP and Titanium Backup and make sure their backups are up to date before I try anything dangerous.
8. Unless you can think of why I can't click on "GOT IT" in Opera VPN, I guess my next step is to sideload the latest OTA again and try all of the VPNs before installing TWRP, SU, and Xposed. That's about all that's left.
JimSmith94 said:
Thanks for the quick reply!
1. Besides VPN Unlimited, I've already tried OpenVPN for Android and OpenVPN Connect. They both use .ovpn files from VPN Unlimited. I just installed Opera VPN and whether I swipe through the intro screens or skip them, I can't click on "GOT IT"; nothing happens. I think this might be the crux of the problem as some of the buttons in the other VPN apps don't respond either. I'm "almost" positive it's not a screen overlay problem because I used to use f.lux that did that, got rid of it, and haven't had any problems since.
2. I run Lookout Security & Antivirus and just scanned again to be sure. Nothing found.
3. I tried safe mode earlier, only to learn that you can't install or run any aftermarket apps.
4-7. Nougat hasn't been released yet and I'm too dependent on systemless root and Xposed, I'm still stock rooted on MM 6.0.1 with the September security update. I do run TWRP and Titanium Backup and make sure their backups are up to date before I try anything dangerous.
8. Unless you can think of why I can't click on "GOT IT" in Opera VPN, I guess my next step is to sideload the latest OTA again and try all of the VPNs before installing TWRP, SU, and Xposed. That's about all that's left.
Click to expand...
Click to collapse
1. Some of the buttons don't respond? What about Opera Max? Opera VPN is fairly new in the game and it still can have issues (though I haven't found any during the brief time I was testing how it works with Max). This sounds really strange. Does it happen in other apps?
2. Rerunning the same Antivirus app will not double the likelyhood of finding a thread . Try with Avast too. You can safely uninstall it after that.
3. What aftermarket apps you have in mind? APK's installed not from the Play Store? It shouldn't impact testing if Unlimited VPN works fine. All background stuff shouldn't run by definition in safe mode.
4-7. Nougat is released. After beta 4 they started releasing OTAs and images for the final release on the beta channel and now it's going to go global. There are factory images for Nexus 9 which I upgraded recently and we have a Nexus 6 but after checking it looks like got the OTA from the beta channel, so it will take a while for the official release to roll out to 6 (though 6P and 5X already have it). Also you're right, there's no systemless root for it yet. We're rolling standard SuperSU on test devices in the office (no need for Android Pay or banking apps there).
8. I'll reach out to the VPN guys for info on gathering debug information for this. Meanwhile try with Opera Max or even Betternet. Do these also fail to connect? Also does it reproduce on mobile and on WiFi?
Got a response from the VPN guys. Most probably your network blocks VPNs. Try pinging http://api.surfeasy.com/ from mobile and WiFi. If it doesn't go through then your network provider is blocking it. Probably it will be the same case for other VPNs. The issue is known and they'll probably add an error message in the next release .
zamber88 said:
1. Some of the buttons don't respond? What about Opera Max? Opera VPN is fairly new in the game and it still can have issues (though I haven't found any during the brief time I was testing how it works with Max). This sounds really strange. Does it happen in other apps?
2. Rerunning the same Antivirus app will not double the likelyhood of finding a thread . Try with Avast too. You can safely uninstall it after that.
3. What aftermarket apps you have in mind? APK's installed not from the Play Store? It shouldn't impact testing if Unlimited VPN works fine. All background stuff shouldn't run by definition in safe mode.
4-7. Nougat is released. After beta 4 they started releasing OTAs and images for the final release on the beta channel and now it's going to go global. There are factory images for Nexus 9 which I upgraded recently and we have a Nexus 6 but after checking it looks like got the OTA from the beta channel, so it will take a while for the official release to roll out to 6 (though 6P and 5X already have it). Also you're right, there's no systemless root for it yet. We're rolling standard SuperSU on test devices in the office (no need for Android Pay or banking apps there).
8. I'll reach out to the VPN guys for info on gathering debug information for this. Meanwhile try with Opera Max or even Betternet. Do these also fail to connect? Also does it reproduce on mobile and on WiFi?
Got a response from the VPN guys. Most probably your network blocks VPNs. Try pinging http://api.surfeasy.com/ from mobile and WiFi. If it doesn't go through then your network provider is blocking it. Probably it will be the same case for other VPNs. The issue is known and they'll probably add an error message in the next release .
Click to expand...
Click to collapse
I installed Opera Max and it was the only app that gave me a helpful error message, so thank you and the coders for that! The message said something like it couldn't establish a VPN connection due to an Xposed module. I disabled Xposed, rebooted, and all of my VPN apps worked. Further searching found this thread saying that Xposed's Immersive Mode was the cuprit. http://forum.xda-developers.com/xperia-z2/help/vpn-to-t2850981
I re-enabled Xposed and disabled only Immersive Mode and VPN still works. Hopefully this will help others in this thread too.
JimSmith94 said:
I installed Opera Max and it was the only app that gave me a helpful error message, so thank you and the coders for that! The message said something like it couldn't establish a VPN connection due to an Xposed module. I disabled Xposed, rebooted, and all of my VPN apps worked. Further searching found this thread saying that Xposed's Immersive Mode was the cuprit. http://forum.xda-developers.com/xperia-z2/help/vpn-to-t2850981
I re-enabled Xposed and disabled only Immersive Mode and VPN still works. Hopefully this will help others in this thread too.
Click to expand...
Click to collapse
I missed that you mentioned Xposed earlier. We implemented Xposed detection to prevent abuse so it's good to hear that it helped you to resolve your issue . Thanks forwarded to the developer behind it . Enjoy your trip!
Has anyone got an L2TP/IPSEC vpn connecting on the s7 at all?
Everything I try just results in a failed attempt to connect, however, if I try the exact same connection settings on my N4 running 5.1.1 then it connects first time every time.
did you manage to get this to work ?
L2TP/IPSEC PSK here and not able to connect via S7 but does fine with my Windows 8 laptop. OpenVPN works on S7 though
Nope, not at all.
Marshmallow fails totally still. Did find a google link which suggests it is an OS issue.
https://code.google.com/p/android/issues/detail?id=196939
Trixster101 said:
Nope, not at all.
Marshmallow fails totally still. Did find a google link which suggests it is an OS issue.
https://code.google.com/p/android/issues/detail?id=196939
Click to expand...
Click to collapse
thanks for that https://code.google.com/p/android/issues/detail?id=196939#c70
I have found a work around. If you can force your VPN server (assuming you
are in control of it the way I am with mine), and can force it to use SHA1
instead of SHA2 then it works. It seems the version of SHA2-256 that
Android 6.x.x is using is an older draft specification and the one
implemented in many other IPsec implementations uses the official SHA2-256
implementation with the correct padding and whatever else.
Has anyone else tried this? I have it set on my server and works with both
new and old Android. Though I am not fond of having to intentionally
weaken my security strength by having to run an older hash algorithm but
considering we can't use Diffie Hellman group larger than 1024 bits anyhow,
seems like a moot point.
Sly
Click to expand...
Click to collapse
and https://code.google.com/p/android/issues/detail?id=196939#c35
In your ipsec.conf file you should add three additions,
add ,aes256-sha2_256 to both ike= and phase2alg=
Then add a newline with sha2-truncbug=yes
reload ipsec
You should now be able to connect to your VPN. I've tested it on my Nexus 5x now, and works like a charm!
Click to expand...
Click to collapse
I had a problem too connecting it to my Synology DS214+ L2PT/Ipsec. I got it by removing my capital letters in my password and after I was able to connect. I don't know the capital character was the problem but now it's working for me.
I am trying to set up a L2PT/IPSec VPN profile for my S7 running on Superman Rom (Android 6.0.1) but always when I connect to the VPN, it says "Unfortunatelly System UI has stopped" and the phone then crashes. Not sure, if this is Custom-ROM specific error, OS-specific error or something else.. Somebody too experiences this problem? Any solutions/ideas, how I can get the VPN connection work? Maybe there are some apps, capable of doing this (I found none capable of L2PT)?
blaukraut said:
I am trying to set up a L2PT/IPSec VPN profile for my S7 running on Superman Rom (Android 6.0.1) but always when I connect to the VPN, it says "Unfortunatelly System UI has stopped" and the phone then crashes. Not sure, if this is Custom-ROM specific error, OS-specific error or something else.. Somebody too experiences this problem? Any solutions/ideas, how I can get the VPN connection work? Maybe there are some apps, capable of doing this (I found none capable of L2PT)?
Click to expand...
Click to collapse
I have same problem with NOBLE rom did you fix it?
No. I then recognized that my VPN provider also supports the VPN connection via Cisco AnyConnect (also for Android), which was very simple and straight forward.
I am having issues regarding Wifi hotspot on Pie.
1. My laptop find it very difficult to find the hotspot. Sometimes I have to restart the hotspot 2-3 times before the network shows up on my laptop. On Oreo, this was always instant and worked immediatly.
2. In the last few days using a hotspot from the phone and my laptop I have had issues regarding DNS/internet. Even though my laptop is connected to the hotspot network, it doesn't have any internet access. When browsing the web on my laptop, all DNS requests always fails. It happens whenever I try to navigate to a site and tries to ping a url from CMD. But if I try to ping a ip address, let say 1.1.1.1, that works fine! I can also use my browser on my phone without any issues at all. The laptop works fine on any other network and the phone works well on its own but the hotspot causes great problems. It sounds to me that for some reason when using a hotspot, DNS requests doesn't come through properly. Also, if I connect to a VPN on my laptop, eveything works, even DNS requests but my VPN is somewhat unreliable so it constantly disconnects so that is not a viable solution for me.
Anyone experiencing similar problems? It's really annoying because now I can't get any work done on my daily commute.
Edit: It sounds similar to these problems: http://piunikaweb.com/2018/08/22/go...hotspot-tethering-issues-after-android-9-pie/
baxtex said:
I am having issues regarding Wifi hotspot on Pie.
1. My laptop find it very difficult to find the hotspot. Sometimes I have to restart the hotspot 2-3 times before the network shows up on my laptop. On Oreo, this was always instant and worked immediatly.
2. In the last few days using a hotspot from the phone and my laptop I have had issues regarding DNS/internet. Even though my laptop is connected to the hotspot network, it doesn't have any internet access. When browsing the web on my laptop, all DNS requests always fails. It happens whenever I try to navigate to a site and tries to ping a url from CMD. But if I try to ping a ip address, let say 1.1.1.1, that works fine! I can also use my browser on my phone without any issues at all. The laptop works fine on any other network and the phone works well on its own but the hotspot causes great problems. It sounds to me that for some reason when using a hotspot, DNS requests doesn't come through properly. Also, if I connect to a VPN on my laptop, eveything works, even DNS requests but my VPN is somewhat unreliable so it constantly disconnects so that is not a viable solution for me.
Anyone experiencing similar problems? It's really annoying because now I can't get any work done on my daily commute.
Edit: It sounds similar to these problems: http://piunikaweb.com/2018/08/22/go...hotspot-tethering-issues-after-android-9-pie/
Click to expand...
Click to collapse
@thugslug @jbm76 I know you guys had an issue with hotspot. Is this the same problem?
yldlj said:
@[email protected] I know you guys had an issue with hotspot. Is this the same problem?
Click to expand...
Click to collapse
Point 2 sounds like it..
jbm76 said:
Point 2 sounds like it..
Click to expand...
Click to collapse
I can't remember what thread you wrote the adb commands that might fix it? Was going to direct him to that post.
yldlj said:
I can't remember what thread you wrote the adb commands that might fix it? Was going to direct him to that post.
Click to expand...
Click to collapse
Yep that fixed for me ??
adb shell settings get global tether_dun_required
If the result is "null" or "1"
adb shell settings put global tether_dun_required 0
Reboot phone
yldlj said:
@[email protected] I know you guys had an issue with hotspot. Is this the same problem?
Click to expand...
Click to collapse
His first problem I don't have, but it's the second that's the same issue as mine.
Obviously he's never searched or he'd have found my lengthy post not very far back.
The solution is there too.
I've never tried turning the VPN on to see if I get through access to the internet that way. I can't now as I've applied the fix @jbm76 found, and I don't really want to back out the fix to try it.
Definitely an area where pie has gone backwards. For those of us affected anyway.
Edit.... Sorry, I didn't note that this was a new thread.
My post is in the OB4 thread (which I at first thought this was). I'm tired and didn't look well enough.
jbm76 said:
Yep that fixed for me ?
adb shell settings get global tether_dun_required
If the result is "null" or "1"
adb shell settings put global tether_dun_required 0
Reboot phone
Click to expand...
Click to collapse
I will try these and report back.
baxtex said:
I will try these and report back.
Click to expand...
Click to collapse
If you get errors at the cmd prompt make sure usb debugging is set 'on' on the phone.
Followed the commands and it seemed to do the trick! Many many thanks!
baxtex said:
Followed the commands and it seemed to do the trick! Many many thanks!
Click to expand...
Click to collapse
[emoji3][emoji3]
Most people it works straight away. What region are you in?
Sent from my SM-P605 using Tapatalk
jbm76 said:
[emoji3][emoji3]
Most people it works straight away. What region are you in?
Sent from my SM-P605 using Tapatalk
Click to expand...
Click to collapse
Sweden.
I want to remember that it did work before, then I have to reflash Pie again and that's when the issues started.
I still wanted to say that I still suffering from the first problem, having difficulties actually finding the hotspot at all.
Its very odd. This problem has started to arise again. I tried running adb shell settings get global tether_dun_required again but I get the answer that it is 0 so that looks fine. I haven't updated anything since I had this problem the last time.
Folks,
To provide some more info and more things to try if you are rooted (I am in the US on T-Mobile). These instructions should also help you avoid tethering detection using the standard Android tethering options if you wish to.
1) Go into settings --> system --> developer options and turn off Tethering hardware acceleration. This will make sure all tethering routing is done by Android at the software level and not by Qualcomm's chipsets (so following steps will apply).
2) As suggested, put global tether_dun_required 0. Note you can also do this from a command prompt by typing su (get root access) and typing setting put global tether_dun_required 0. What this does is route tething traffic over the same APN as phone traffic, and not the hidden tethering APN that some carriers put on the sim cards.
3) Install Change TTL and in settings set it to run a boot and set TTL to 64. This ensures that all traffic leaving your phone will have a TTL of 64 and look like it is coming from the phone. (I am pretty sure this also set's ipv6 hop limit, as TMobile in the US is all IPv6 and this hides traffic.)
Reboot. If you still have trouble -- try Android's USB option to see if it is WiFi related vs Tethering system related.
- Verify that global tether_dun_required is still 0 after reboot (it should be if you are rooted).
- Delete the WiFi entry on your computer and re-join the phone's network -- sometimes it is on your computer's side.
Another thing to try is Easy Tether -- this is a good USB tethering option that won't use Android tethering system and it is guaranteed to route traffic over the phone's network APN.
If the issue is DNS, you can isolate that by manually putting a DNS (8.8.8.8) into the tethered computer to see if that is the issue.
Also, google search xda VPN Hotspot. This app has a ton of options to change Android's tethering routing even if you are not using a VPN. This may also help you figure something out. You can activate tethering, then go in here and turn on the wlan interface and it should route traffic directly to that (which should be happening anyways because of tether_dun_required = 0).
Good luck!
MW
MetroWestMA said:
Folks,
To provide some more info and more things to try if you are rooted (I am in the US on T-Mobile). These instructions should also help you avoid tethering detection using the standard Android tethering options if you wish to.
1) Go into settings --> system --> developer options and turn off Tethering hardware acceleration. This will make sure all tethering routing is done by Android at the software level and not by Qualcomm's chipsets (so following steps will apply).
2) As suggested, put global tether_dun_required 0. Note you can also do this from a command prompt by typing su (get root access) and typing setting put global tether_dun_required 0. What this does is route tething traffic over the same APN as phone traffic, and not the hidden tethering APN that some carriers put on the sim cards.
3) Install Change TTL and in settings set it to run a boot and set TTL to 64. This ensures that all traffic leaving your phone will have a TTL of 64 and look like it is coming from the phone. (I am pretty sure this also set's ipv6 hop limit, as TMobile in the US is all IPv6 and this hides traffic.)
Reboot. If you still have trouble -- try Android's USB option to see if it is WiFi related vs Tethering system related.
- Verify that global tether_dun_required is still 0 after reboot (it should be if you are rooted).
- Delete the WiFi entry on your computer and re-join the phone's network -- sometimes it is on your computer's side.
Another thing to try is Easy Tether -- this is a good USB tethering option that won't use Android tethering system and it is guaranteed to route traffic over the phone's network APN.
If the issue is DNS, you can isolate that by manually putting a DNS (8.8.8.8) into the tethered computer to see if that is the issue.
Also, google search xda VPN Hotspot. This app has a ton of options to change Android's tethering routing even if you are not using a VPN. This may also help you figure something out. You can activate tethering, then go in here and turn on the wlan interface and it should route traffic directly to that (which should be happening anyways because of tether_dun_required = 0).
Good luck!
MW
Click to expand...
Click to collapse
Hi and thank you for your post. It seems that windows had changed dns settings by its own to something invalid, so that is why it didn't work. However I am still having connection issues. Mainly I find it very difficult to connect my laptop (and other devices) to the hotspot of the Oneplus 6.
1) Done.
2) Done.
3) It was already set at 64 but I tried setting in to 64 again.
DUN is still 0 after reboot. I have also removed the wifi from my PC and changed name on the hotspot. Also tried both 2.4 and 5 Ghz. When the pc is connected the hotspot, I can ping google succesfully, so internet works but not DNS, all requests in my browser times out. I have also tried setting DNS to external providers in the phone (not sure if if affects the hotspot though). I looked at easy tether but root version was pretty expensive. I also googled XDA VPN Hotspot but I'm not sure which app you mean. Do you have the link?
Right now I'm just thinking of factory resetting the phone and installing the latest oxygen version (I'm still on 9.0.0.0).
Here is even more testing:
What I am experiencing is that there are grave problems trying to connect when in an area with a lot of wifi networks.
I live on the countryside and I thought I would try using hotspot for a couple of times. Thing is, at home, sharing hotspot from the phone to my laptop always works instantly, both on 5Ghz and 2.4Ghz. I might add that there are basically no wifi networks interfering where I live, except for my own. When I start my bus ride in the morning from my house to a city were I work, the hotspot usually works pretty good. But it's when I'm going home that I am start having problems. In the city, there is probably around 50-100 wifi networks when I start the ride home. And that's when it usually is impossible to connect the hotspot to the laptop. However, when leaving the city and entering the highway, it is usually easier. I have these connection problems on both 5Ghz and 2.4Ghz and if it does connect, 2.4 is hideous, it disconnects all the time.
So the conclusion for me is that it is having a very hard time connecting when there are a lot of wifi networks around. However, It never seemed to be a major problem on Oreo, only on Pie.
baxtex said:
Hi and thank you for your post. It seems that windows had changed dns settings by its own to something invalid, so that is why it didn't work. However I am still having connection issues. Mainly I find it very difficult to connect my laptop (and other devices) to the hotspot of the Oneplus 6.
1) Done.
2) Done.
3) It was already set at 64 but I tried setting in to 64 again.
DUN is still 0 after reboot. I have also removed the wifi from my PC and changed name on the hotspot. Also tried both 2.4 and 5 Ghz. When the pc is connected the hotspot, I can ping google succesfully, so internet works but not DNS, all requests in my browser times out. I have also tried setting DNS to external providers in the phone (not sure if if affects the hotspot though). I looked at easy tether but root version was pretty expensive. I also googled XDA VPN Hotspot but I'm not sure which app you mean. Do you have the link?
Right now I'm just thinking of factory resetting the phone and installing the latest oxygen version (I'm still on 9.0.0.0).
Here is even more testing:
What I am experiencing is that there are grave problems trying to connect when in an area with a lot of wifi networks.
I live on the countryside and I thought I would try using hotspot for a couple of times. Thing is, at home, sharing hotspot from the phone to my laptop always works instantly, both on 5Ghz and 2.4Ghz. I might add that there are basically no wifi networks interfering where I live, except for my own. When I start my bus ride in the morning from my house to a city were I work, the hotspot usually works pretty good. But it's when I'm going home that I am start having problems. In the city, there is probably around 50-100 wifi networks when I start the ride home. And that's when it usually is impossible to connect the hotspot to the laptop. However, when leaving the city and entering the highway, it is usually easier. I have these connection problems on both 5Ghz and 2.4Ghz and if it does connect, 2.4 is hideous, it disconnects all the time.
So the conclusion for me is that it is having a very hard time connecting when there are a lot of wifi networks around. However, It never seemed to be a major problem on Oreo, only on Pie.
Click to expand...
Click to collapse
Seems more like WiFi / Computer related than phone. Did you try USB tethering? Is DNS get manually set in your computer by something else you installed?
MetroWestMA said:
Seems more like WiFi / Computer related than phone. Did you try USB tethering? Is DNS get manually set in your computer by something else you installed?
Click to expand...
Click to collapse
USB tethering works fine, dns as well. Its just the connection, it is very difficult to connect anything to the Oneplus 6 in wifi crowded areas.
Will this effect Bluetooth tethering too? Or is there another command for that? Dang built in hot spot get horrible speed after this setting is set, at least be on T-Mobile.
Hi guys,
I also face a strange issue, the connected devices to the hotspot it keeps disconnected after some time.. 1min, 5min, 15min...is random and annoying. Dose anyone face this issue to? Tried diferent fixes but nothing works, it remained to do a factory reset to see if the problem persist..
khrisstyan said:
Hi guys,
I also face a strange issue, the connected devices to the hotspot it keeps disconnected after some time.. 1min, 5min, 15min...is random and annoying. Dose anyone face this issue to? Tried diferent fixes but nothing works, it remained to do a factory reset to see if the problem persist..
Click to expand...
Click to collapse
Read this thread. Workaround in here.