Hi all who read this, after I flashed lineage and gapps and magisk,there was some error message for magisk. So I went to the system clearly after that, and I had to root my phone so I went again to the twrp, a weird message said hello to me. It was about modification something so I first time saw that and didn't care for it actually. then I saw that internal storage was totally deleted and everything with it. I couldnt flash any roms because there was none. All I can reach is fastboot and twrp. But, they are not working very well either. Couldn't see my device on pc with command adb devices, couldn't do adb sideload via twrp, then I bought a otg cabel and it didn't work either (my usb port on opo is working). I can't mouth the usb otg choise in twrp. So I was working for it for 2 days for saving my opo but couldn't. Can anyone help me with this problem please?
Related
I tried to install cyanogenmod 12 onto my Moto G (2013 XT1031), and it was stuck in boot for 10 hours, so I put it into recovery, plugged it back into my computer, followed a forum on how to fix it, and now the drivers are gone. My computer can't communicate to my phone through USB. So now when I type "adb devices" it isn't listed, so I cannot push a stock img file to my phone to fix it. I've been looking forever for a fix... Could somebody here help me if you have any idea what to do. Thx.
Add me on Facebook. I'll help you. I had the same problem. www.Facebook.Com/mykehdoom
I will post here what I did to fix it, (if I do fix it) just in case anyone else comes here to fix their problem.
You should always keep a backup or stock ROM zip on SD card or USB otg. And you shouldn't have this problem as long as you can boot to recovery. I've found the quickest way to get any Lollipop ROM to boot since the first official CM12 nightly is to install Donkey Kang kernel. Most of the time they'll stay on boot animation forever until I do. I have an XT1031 too. A Leaf micro SD card reader or a Leaf bridge are well worth the cash. They've saved me from having to use my PC to get out of a jam every time, and I've flashed almost every build of every ROM that will flash on this phone.
Bellablue2 said:
I tried to install cyanogenmod 12 onto my Moto G (2013 XT1031), and it was stuck in boot for 10 hours, so I put it into recovery, plugged it back into my computer, followed a forum on how to fix it, and now the drivers are gone. My computer can't communicate to my phone through USB. So now when I type "adb devices" it isn't listed, so I cannot push a stock img file to my phone to fix it. I've been looking forever for a fix... Could somebody here help me if you have any idea what to do. Thx.
Click to expand...
Click to collapse
Have you tried restoring stock via fastboot? http://forum.xda-developers.com/showthread.php?t=2542219
If you wish to keep the contents of the internal storage, skip the erase userdata part. At least until you can backup what you want off it.
dominati said:
Have you tried restoring stock via fastboot? http://forum.xda-developers.com/showthread.php?t=2542219
If you wish to keep the contents of the internal storage, skip the erase userdata part. At least until you can backup what you want off it.
Click to expand...
Click to collapse
No, the problem was that my computer could not do anything to the phone, they would not interact at all. ADB couldn't sense the phone. I did fix it, however. Here is what I did:
1.Open Device Manager
2.Plug in phone
3.See if a new device pops up when device is plugged in.
4.Right click the device: Properties
5.Update Driver
6.Browse Computer
7.Pick from list of Drivers
8.Uncheck "Show compatible Hardware"
9.Manufacturer: Motorola
10.Motorola USB Composite Device
11.Next
12.Follow through and wait for it to set up your driver, then device.
13.After that, adb could find my phone.
sitrep
-no rom/os on phone
-computers(multiple) wont find my phone
-since nexus 5 no sd card slot or otg
-twrp working
-was running cm13
main problem. i wanted to install a new rom on my phone so i deleted the old one, so i could put the new one on. then i realised i did not have a new rom on my phone. so i went to connect is to my computer and it could not find it. so now i have a phone that can boot into twrp and nothing else. i did a full wipe of the system.(every single option available in the twrp options)
how do i get my phone back since i cant put a new rom on my phone since i just cant drag a file on it from my computer. since there is no other way i can put files on my phone. it is not because of lack of drivers. since it used to work just fine. i tried multiple computers to be sure. all of which in the past i could access my phone on.
One of the advantages of adb sideload is to solve this kind of situation.
adb push should help too. Your device must be into the recovery mode.
Other solution: download the factory images and flash everything but userdata.
Please only post a thread once, use the below. Thread closed.
no rom and no connection with my computer
Regards,
Matt
Hello guys..
I really have a problem right now! I appreciate everyone who tries to help me. I´ll try to expain what exactly is my problem with my Mate8.
Also I´d like to apologize for mistakes of gramatics, because im acutally from Germany..
So, my phone was working right, and actually everything was okay. With time it got so slowly, because storage was full with datas and so on. I tried to clean up some things to get it again a bit faster and so on, but that did not make it (at all). Also windows wont recognize the phone anymore. When plug in the USB it didnt even asked for data, charging or photos.. also I had problems with charging, it took toooo long for a few %.
I was on "KANGVIP" Rom (as much I know i changed stock to this custom rom) https://forum.xda-developers.com/mate-8/development/rom-kangvip-slim-t3318572
Time passed untill 3 days I decided to flash a new rom normally, like put rom on sd card, wipe dalvic and cache, and so on. I wanted this rom; Lineage OS https://forum.xda-developers.com/mate-8/development/6-0-1-cyanogenmod-13-port-t3512985
But everything came up with different errors for different actions I did like this:
"cant mound sd card"
"cant mount inernal storage"
"cant mount data"
"cant format data"
"cant mount system"
"cant mount cache"
etc. etc...
I tried to change file system to EXT3. EXT4, EXT2, FAT, and so on, for Data and System. Nothing worked correctly (but I had still on some Filestystems instead of 0MB like 2700MB). Still not working correct... On TWRP.
Then I tried to update TWRP from 3.0.1 to 3.1 (new one released). Because I saw, more precisely, I heard that an update can fix this mount issues I had.
Said and done, I updated it and instead of 3.1 I had 3.0.2 (idk why but I didnt care). But still theese problems happend.
So then I saw in a Video on youtube (which I cant find anymore) that another recovery like CWM can fix this issues. So I downloaded CWM recovery.img and installed it with TWRP an rebooted to recovery again. And now I´m in a situation, in wich I dont know what to do.
Now the phone tries to start, but no OS installed.
Try to get into Recovery, but no recovery aviable exept eRecovery which is failing with data when trying to restore.
Problem is also that Fastboot and ADB is not working. Installed HiSuite, ADB drivers, Samsung drivers (though could help).
Tried Knife Italian, but no connection to pc..
Tried different cable, no luck.
Tried windows 7, 8.1, 10 Home and now im on Win 10 Pro 64x.
All I can do is to boot into Fastmode, but cant do anything. And when I try to boot the phone normally it stucks on "Your device is booting now..." because no OS...
PLEASE HELP ME GUYS! I REALLY NEED THAT PHONE :crying::crying::crying::crying::crying:
THANK YOU !!! :good:
Hallo,
If your phone is still recognized in fastboot mode, you can try following up my tutorial here » https://forum.xda-developers.com/mate-8/help/how-to-unbrick-l29-al10-stuck-fastboot-t3599775
I was experiencing the same problem. No OS, no recovery, no fastboot flash possibility, only fastboot booting. Keep in mind that you will need 15€ for this method to work but it is the only way to resurrect your device.
PM me if you need further assistance.
djmitza222 said:
Hallo,
If your phone is still recognized in fastboot mode, you can try following up my tutorial here » https://forum.xda-developers.com/mate-8/help/how-to-unbrick-l29-al10-stuck-fastboot-t3599775
I was experiencing the same problem. No OS, no recovery, no fastboot flash possibility, only fastboot booting. Keep in mind that you will need 15€ for this method to work but it is the only way to resurrect your device.
PM me if you need further assistance.
Click to expand...
Click to collapse
Thank you for the reply my friend.
The problem is, that it only boots in to fastbootmode, but any pc wont recognize it. I tried even with Mac...:crying:
Greetings
DC-Phoenix should recognize the fastboot brick state even if the device doesn't show up in Minimal ADB & Fastboot. Try my method and let me know if it works.
Hi guy's.
DC Phoenix save my mate 8 with factory firmware.
I was the same problem like you and search one week a solution and after I decided to pay and try Phoenix and now I write from my mate 8
Before buy 15€ of credit you can download and try to connect your phone on DC Phoenix
does the DC phoenix method take your phone to absolute stock? ie, stock firmware +recovery + Locked + no root?
Yes. You will have the factory firmware (stock) but with unlocked bootloader.
Hi there.
I have an U11 now and I am quite happy with it.
But there is one problem.
It takes ages till I see the U11 appearing on the PC. USB debugging is on, data transfer chose at the U11, tried several USB connections on the PC tried even another laptop.
Sometimes it is even not showing the phone.
Are here people around who are facing the same problem?
Any solutions?
Thx a lot.
Schuertzi
Yeap exactly the same...
No problem here, each new usb port you connect to loads the drivers and takes a few seconds but after that connection is fast.
Thing that has me peeved is the lack of OTG support. I like to backup straight to an external HDD. No go with the U11.
Tried and waited really long after the drivers were installed. Nothing changed really. Even with using the same USB connection.
May be I did something wrong during flashing TWRP and then the Viper ROM.
Will check and let you know.
Thx
Sxhuertzi
I had the same issue even though i didnt root. I tried on multiple pcs and still got a message saying usb device not recognized. So i returned it and ordered the solar red. I should receive it today and I'll let you know if I still get the same result.
Great, just let us know.
Thx
Hi Guys,
I solved my problem.
I had first the wrong TWRP installed then deleted. Tried then again to install via fastboot. Was not possible.
Then, I installed the official TWRP app from the playstore. Installed the actual TWRP from there. And voila, TWRP installed, rebooted and everything works.
Just for your info. May be you have similar problem.
Schuertzi.
So i definitely had a defective device as this new one connects without any issue.
schuertzi said:
Hi Guys,
I solved my problem.
I had first the wrong TWRP installed then deleted. Tried then again to install via fastboot. Was not possible.
Then, I installed the official TWRP app from the playstore. Installed the actual TWRP from there. And voila, TWRP installed, rebooted and everything works.
Just for your info. May be you have similar problem.
Schuertzi.
Click to expand...
Click to collapse
Hello Sir,
I have almost the same problem which is when I try to connect my HTC U11 to any windows computer it gives me error that the usb is malfunctioned and don't recognize my phone, I also tried to install different TWRP and it doesn't work either, any help would be much appreciated also what type of TWRP you have installed to fix this issue, thank you.
jhill110 said:
Thing that has me peeved is the lack of OTG support. I like to backup straight to an external HDD. No go with the U11.
Click to expand...
Click to collapse
I can use external HDD and pendrives. In fact, the u11 recognises NTFS even.
Hello everybody, I was trying to update my Magisk and that process failed. I thought nothing of it put it off. Tried to restart my phone a few days later and now it's stuck in a fastboot loop. Cannot even go into recovery. So I'm like okay, probably need to reinstall recovery and flash a clean rom again. Try the "fastboot boot recovery.img" command and it's giving me a "waiting for any device". Googling says it's a driver error, but that's strange because I have used my phone on this computer before with ADB and fastboot. Fastboot and ADB commands work fine on my Oneplus 3T.
A week ago I also had the problems after the Magisk update. But connecting to the PC worked normally for me. Once you've installed the drivers, there shouldn't be any problems. You could use a different cable.
Incidentally, Magisk only messed up the boot image. It is sufficient if you flash your boot.img, then the twrp.zip, reboot into recovery, then the magisk.zip.
That was completely enough for me. Cell phone works normally again, without data loss.
Good luck!
Yeah that's exactly what I am trying to do, I can't even flash the boot.img to get into recovery, my computer won't recognize the device for some reason now. Do you know where I can find the drivers? I could only find shady 3rd party sites. Thanks!
Tried installing drivers from here, no change.
Download Latest OnePlus USB Drivers for Windows and Mac
Download The Latest OnePlus USB Drivers For All OnePlus Android Smartphones. We Have Included USB drivers for Both Windows And Apple MAC OS Users. Download Links Given Below.
www.getdroidtips.com
This is installed and works with me
ghost323 said:
This is installed and works with me
Click to expand...
Click to collapse
No joy, looks like that's the same file as the one I downloaded. Thanks for your help anyways.
Now I can't even turn my phone off lol. It woke itself up this morning magically and now whenever I hit power off in fastboot it just boots up again into fastboot. Might have to send it in...the horror
Your phone is crying out for help. It doesn't like to die.
I think you will have tried everything possible. Have you already connected it to another computer with the right drivers? Tried other cables?
ghost323 said:
Your phone is crying out for help. It doesn't like to die.
I think you will have tried everything possible. Have you already connected it to another computer with the right drivers? Tried other cables?
Click to expand...
Click to collapse
Haha yeah, it's like your kid who refuses to go to bed and is throwing a tantrum. Yeah two different computers that are known to have worked with this phone in the past (how I unlocked the bootloader in the first place). Different ports, different cables. It seems like I'm having the same issue that a lot of other people are having with the last Magisk update, except they're able to flash the recovery image in fastboot to get back running.
This is a ****ty situation! That was really a nasty magisk update. I wonder why its consequences are so different, even though it is the same cell phone.
fastboot cannot recognize device but adb can
usb debugging is enabled on device. running latest version of adb, fastboot. Have tried on both mac and win10 but same issue on both. Oneplus 7 pro is running 10.3.0GM21AA >fastboot devices >adb devices List of devices attached 966c8016...
forum.xda-developers.com
Look at this. Maybe it will help you so that your computer recognizes the cell phone again.