Database Info

[Q] Mount USB storage under ClockWorkmod Recovery 6.0.1.0

Hello,
My phone had been experiencing a host of problems, so I formatted all partitions. (/sdcard, /system, /cache, /data, /boot)
I planned on using the "mount USB storage" to transfer a copy of CM10 to the sdcard and flash that from recovery,
but the device does not appear in my computer or device manager in windows, and Linux doesn't see it either.
In it's current state, it's soft bricked, is there anything I can do to fix it?
It now says "fastboot mode - no boot or recovery IMG", and I have no drivers to communicate with it under adb or fastboot.
Thanks,
-Max

Use this guide to recover your device.

Thanks, but my issue is that I can't install the drivers, could it be a windows 8 thing?
Everything seems to require that I enter USB debugging first, which is impossible for me now.
I think the ADB driver is impossible to install, unless I can do it over CWM, and every fastboot driver I've tried has failed too.

How did you erase everything? Was it through fastboot or CWM?

I did it through CWM. I had just recently installed Windows 8, and hadn't connected it since then so no drivers are installed.

maxmalynowsky said:
I did it through CWM. I had just recently installed Windows 8, and hadn't connected it since then so no drivers are installed.
Click to expand...
Click to collapse
In my opinion, its safer to erase everything from fastboot.
If fastboot recognizes your phone, then you can erase or install whatever you want.
If fastboot does not recognize your phone, then you can't erase it. You then need to find out why. Bad drivers, wrong folders, bad usb cable...In the meantime you phone will still work.
On my windows 7 box, under the administrator account, it took a while to set up the drivers, don't know why, but windows would not take it at first.
Maybe you can mail the phone to a xda member to get it going again...

maxmalynowsky said:
Hello,
My phone had been experiencing a host of problems, so I formatted all partitions. (/sdcard, /system, /cache, /data, /boot)
I planned on using the "mount USB storage" to transfer a copy of CM10 to the sdcard and flash that from recovery,
but the device does not appear in my computer or device manager in windows, and Linux doesn't see it either.
In it's current state, it's soft bricked, is there anything I can do to fix it?
It now says "fastboot mode - no boot or recovery IMG", and I have no drivers to communicate with it under adb or fastboot.
Thanks,
-Max
Click to expand...
Click to collapse
I am sorry to hear about your phone. You are not alone I did the exact same thing a few days ago. Don't beat yourself up I have done that enough for both of us. Through my research into this i found there a few things that you might try (I don't own a PC so I haven't yet)
To get the drivers, I read a couple people had success downloading PDANet and installing them that way. I think they are located in "legacy drivers"
From the original "root, un-root" thread for your model download the stock boot img and try to flash that using ADB
follow the instructions to un-root and start over with rooting.
I also was going to look into Wug's toolkit (in the dev section) it looks like that may be an easy option to flash a working boot and recovery img.
I hope this helps please let me know.
I gave up to quick and ordered a GNex but I'm not touching that until I get my NS4G sorted out (my faith in my abilities is shaken and I could not handle bricking a brand new phone). I will be going to a friends house tonight to use their PC and try to get my NS running. I will be back to let you known what works and what doesn't. If you try or find anything would you please post? Two heads working on this issue are better then one. Thanks and good luck.
Sent from my temp PC36100 while my Nexus is sick using Tapatalk 2

*** success ***
The solution was an easy one thanks to our developers, the hard part was finding the answer and of course, beating myself up for making the mistake in the first place. Here's what you do...
Leave your phone with the battery out for a while. Download "Wug's Nexus Toolkit" In found it in the NS4G dev section but I believe it covers all variants (not sure which you have) at the select your model and custom JB ROM download the drivers (from the actual toolkit) turn on, plug in and select flash stock img, relock boot loader, pick the stock ROM you want and press go and your phone will be flashed and reboot in under a minute. Sign in on your phone (the toolkit should auto populate your new ROM and then just follow the steps to unlock, flash and install a custom recovery then pick any ROM you want and start over.
I really hope this helps you as I'm sure you find the whole situation as stomach-churning as I did. Please PM me and let me know.
If it does work please leave a thank you or donation to the dev for creating such an awesome tool. Again, good luck hope you get your nex back online.
Sent from my Galaxy Nexus using Tapatalk 2

The Nexus Toolkit was actually my first option, it's helped me out before. I went back and tried installing the drivers using the 3 options it gives. # 3 & #2, RAW and Samsung signed drivers don't work. Option #1, the PDAnet drivers didn't work last time I tried it (all 3 options require USB debugging enabled). However, I just tried #1 again by turning on the device in CWM and that seemed to work, but I'm not sure (installation went according to the guide). However, once I tried to flash stock img, it gave me errors about not being able to reach the device in fastboot. Can you elaborate on those two steps, driver installation and flashing? As soon as I can get fastboot to recognize my device I can pretty much take it from there. BTW, I've got a i9020A and using NRT 1.6.1; and what's the significance of leaving the phone with the battery out for a while?

Mine was in the box with the battery out overnight. When I had access to a PC and plugged it in it said something at the bottom of the fastboot screen in grey that it did not before and I actually think that was the trick (System normal or system OK or something like that and when replugged to the USB the message just repeated and stacked up on the lower left of the fastboot screen). Try letting the phone sit for a while. All driver options failed for me except the tool kit.
Sent from my Galaxy Nexus using Tapatalk 2

Tried your fix, but the phone remains unable to have it's drivers installed. It's always giving "USB device not recognized" errors no matter what I do. I'm just going to shelf it and accept my loss. Thanks for the help though!
edit: Tried using some Linux tools, much greater success! This guide finally got my device listed under fastboot: http://forum.xda-developers.com/showthread.php?t=1447040
edit2: Up and running again with the android-tools-fastboot package for Linux and a standard stock image flash: http://forum.xda-developers.com/showthread.php?t=1572307

I am so glad to hear it! I stayed subscribed to the nexus s forum just to keep up on your progress and to try and help. Good for you.
Sent from my Galaxy Nexus using Tapatalk 2

[Q] LG-P506 Fastboot Can See My Device But Won't Show The Serial Number

So I have a LG p506 and I recently installed cyanogen-mod 10.1 on it. I had to use the November release as the newest one wouldn't load past the cyanogen logo(i let it run for a couple hours). Everything seemed to work great after that. So I put the phone in my backpack for a later date.
When i finally pull it back out the battery was completely dead, and plugging the phone into usb would not charge it. I used an external device to charge it.
Basically the only thing the phone can do now is load the lg logo, go into emergency mode, and fastboot. I can erase and flash images, I have tried system boot and recovery multiple times with different files.
However I get the same two things every time i try something:
1. when I plug the phone into usb, the phone will do its thing then give a STALL GET_DESCRIPTOR error
2. fastboot devices shows something but I get a "?" where the serial number should be.
I am not proficient enough with fastboot to try other commands. Any one have some advice?
Also, I've tried every usb port I have, theres only one that works with the phone. One of the usb ports shows up normally on the phone but fastboot won't show any devices. I am running windows 7 ultimate x64.
The one thing i haven't tried is reinstalling windows 8 on one of my hdd's and seeing if it isn't a win7 issue. Ive used it with win 8 before and it didn't give the error message.

baked cake said:
So I have a LG p506 and I recently installed cyanogen-mod 10.1 on it. I had to use the November release as the newest one wouldn't load past the cyanogen logo(i let it run for a couple hours). Everything seemed to work great after that. So I put the phone in my backpack for a later date.
When i finally pull it back out the battery was completely dead, and plugging the phone into usb would not charge it. I used an external device to charge it.
Basically the only thing the phone can do now is load the lg logo, go into emergency mode, and fastboot. I can erase and flash images, I have tried system boot and recovery multiple times with different files.
However I get the same two things every time i try something:
1. when I plug the phone into usb, the phone will do its thing then give a STALL GET_DESCRIPTOR error
2. fastboot devices shows something but I get a "?" where the serial number should be.
I am not proficient enough with fastboot to try other commands. Any one have some advice?
Also, I've tried every usb port I have, theres only one that works with the phone. One of the usb ports shows up normally on the phone but fastboot won't show any devices. I am running windows 7 ultimate x64.
The one thing i haven't tried is reinstalling windows 8 on one of my hdd's and seeing if it isn't a win7 issue. Ive used it with win 8 before and it didn't give the error message.
Click to expand...
Click to collapse
fastboot doesn't show a serial number for that device. At least never has for me. If 'fastboot devices' lists something like
Code:
List of devices attached
???????? fastboot
then you're good to go.

damn that was my only thing to go on lol. nothing will get this phone to boot into recovery. im about to get a sd card reader for my pc to test and see if its bad.

baked cake said:
damn that was my only thing to go on lol. nothing will get this phone to boot into recovery. im about to get a sd card reader for my pc to test and see if its bad.
Click to expand...
Click to collapse
You can use fastboot to flash another recovery. Rashed should have a link in the OP for the 4.1.2 ROM you said you were using. You can continue to use the command-line if you like, but I did write a Windows app for flashing recoveries. Links in my signature.

shinobisoft said:
You can use fastboot to flash another recovery. Rashed should have a link in the OP for the 4.1.2 ROM you said you were using. You can continue to use the command-line if you like, but I did write a Windows app for flashing recoveries. Links in my signature.
Click to expand...
Click to collapse
ill give it a try, but i have tried just about every recovery file i can get my hands on and no luck, also looks like winds 8 doesn't want to acknowledge my phones existence. I downloaded and installed the driver from LG but still no luck, windows 8 is giving me a failed descriptor error as well.

ok so i have been stumbling around for a bit and noticed something possible wrong.
Windows 7 device manager shows my device, installed correctly, but listed as USB Modem Phone ADB Port.
Shouldn't this be a fastboot port? Since ADB is only available via the android operating system, and i can't get into my operating system, all i have is fastboot.
I have ran thru quite a few fast boot recovery pages, and I don't know what im missing here.

baked cake said:
ok so i have been stumbling around for a bit and noticed something possible wrong.
Windows 7 device manager shows my device, installed correctly, but listed as USB Modem Phone ADB Port.
Shouldn't this be a fastboot port? Since ADB is only available via the android operating system, and i can't get into my operating system, all i have is fastboot.
I have ran thru quite a few fast boot recovery pages, and I don't know what im missing here.
Click to expand...
Click to collapse
I'd say that was/is the correct port name. I don't have that device anymore so I cannot say for sure.
Sent from my LG-P769 using Tapatalk

ok, so this is a follow up on some things i have tried recently.
Since my last post i have:
1. put the sdcard into my tablet, and formatted it/ ran an error scan on it via windows.
2. i then flashed a recovery file via my phones fastboot, i pulled that card put it back in tablet to see what files it installed.
3. according to windows, flash recovery installed a .LOST folder with nothing in it, which is the same thing my tablet has on its internal memory, so i don't think there's anything wrong there.
4. phone still cant boot past LG logo(or recovery), or charge the battery when plugged in.
5. I still get a stall get_descriptor error when connected via usb, and commands such as fastboot reboot don't work, tho the phone will say its rebooting (it says its rebooting then just sits there and does nothing, command prompt will say action completed).
6. one thing i have tried as well, is telling windows not to automatically install drivers, then uninstalling my phone from device manager.
Whats interesting about this was that windows was installing its own ADB modem driver from it's own library every time i plugged in the phone. After disabling auto drivers, and reinstalling my LG drivers, the phone simply remains an unknown device.
Some things I have tried include pointing windows to the driver folder, both the downloaded folder and the folder windows installed it to. Neither worked.
The next thing I tried is the have disc option on both. Although there are setup information files in the install folder (about 50 of em), pointing the phone to each file one at a time did not work.
What did work, interesting enough was pointing the phone to a set of Naked Drivers I downloaded, although none of those drivers are specifically for my phone, and they only gave me the same problem I had when i had windows auto installing its own driver.

LG L5 612 - fastboot issue
Hi,
I have an LG L5 612.
I'm trying to perform below actions, but always get "waiting for device" ... and nothing happens.
fastboot reboot-bootloader
fastboot flash boot boot.img
"adb devices" lists my device correctly, while "fastboot devices" output nothing.
C:\ADB>adb devices
List of devices attached
LGOTMS840b676a device
C:\ADB>fastboot devices
C:\ADB>
C:\ADB>fastboot reboot-bootloader
< waiting for device >

Moto G Totally Unusable

Hey guys. Thank you for you time looking over this.
My brother has a Moto G (US GSM version)that he's asked me to repair for him for $50 (that I really need) and I've gone through everything my limited brain can think of.
So, here's the issue(s): When turned on, the phone immediately boots to fastboot and at the bottom has two lines saying "Invalid Boot Image" and
"Fastboot reason: Fall-through from normal boot mode"
I can get the phone into CWM recovery, and that's about it. When attached via USB, the phone doesn't show connected at all. A normal bootup just kicks me to fastboot immediately. Inside CWM, I've tried wiping and all that jazz, but it doesn't seem to do anything for me. I know there are guides and such for restoring the phone back to stock everything..but I can't get the PC to see the phone at all, so I'm not sure if I'm still able to do that or not. I've not been able to find a way.
Hopefully that's enough information. I'm not too sure what else is needed. But I could really use the help here if you guys have any ideas, because I'm totally stumped. Thanks again.

You can either use a USB OTG cable to connect it to a flash drive or micro SD card and flash a CM zip. I'm not sure if your boot loader is corrupted or not, so you might have to reflash that too.
Or you can manually reflash the stock firmware from the bootloader (again assuming your bootloader works. You might be able to sideload through CWM too), but if you're not familiar with adb it might be a pain in the ass.
If you don't have a USB otg cable and want the easiest way out, go to the original development section for the moto g and go to the "Moto tool" thread. Download the GPE firmware and use the tool to flash it (I believe this also flashes the gpe bootloader so if that's your issue that will fix it too), its very simple to use.
Sent from my XT1034 using Tapatalk

pisherthefisher said:
You can either use a USB OTG cable to connect it to a flash drive or micro SD card and flash a CM zip. I'm not sure if your boot loader is corrupted or not, so you might have to reflash that too.
Or you can manually reflash the stock firmware from the bootloader (again assuming your bootloader works. You might be able to sideload through CWM too), but if you're not familiar with adb it might be a pain in the ass.
If you don't have a USB otg cable and want the easiest way out, go to the original development section for the moto g and go to the "Moto tool" thread. Download the GPE firmware and use the tool to flash it (I believe this also flashes the gpe bootloader so if that's your issue that will fix it too), its very simple to use.
Sent from my XT1034 using Tapatalk
Click to expand...
Click to collapse
Thanks very much for your help. I'm just wondering if all the steps with the cables and all that will still work when the phone shows no connection at all? When it's hooked up to the PC, it doesn't show connected whatsoever.
Sorry, I'm not too familiar with this stuff.

BrinkBT said:
Thanks very much for your help. I'm just wondering if all the steps with the cables and all that will still work when the phone shows no connection at all? When it's hooked up to the PC, it doesn't show connected whatsoever.
Sorry, I'm not too familiar with this stuff.
Click to expand...
Click to collapse
What computer software are you using of its windows download Motorola drivers
Sent from my XT1032 using Tapatalk

Moto G boot up failed
I have a similar problem with my Moto G 2013 LTE international version. My phone boots into fastboot, but then I cannot boot into recovery. It just says boot up failed. My bootloader is unlocked and I am rooted. I have tried to install TWRP but no luck. I have tried it using TWRP manager automatically and by flashing a zip file. I have tried sideloading, but that didn't work either. Please forward any suggestions.

[Q] Moto G, wiped system through idiocy and can only access TWRP & fastboot

Hey folks,
I'm rather embarrassed that I have to ask for help here, but here we go:
I wanted to update my Moto G (1st gen) to Lollipop 5.1 (via this thread: http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510) and after toying around with it for a few hours got frustrated and did some stupid things, which I'm also having a hard time to remember.
From what I recall, I managed to flash the "GPE 5.1 ROM (Optimized) v1.1" ROM via TWRP, but when booting the phone got stuck on the BOOTLOADER screen for about 1 1/2 hours, after which I decided to turn off the phone.
After that I frustratedly started fiddling around in TWRP and wiped system, cache and some more things (derp :silly: ) and well... ever since then I'm trying to get a new ROM on my SD card, but I can't push via adp because my device is not found.
Here's the facts
- When I try to regularly boot up my phone, the Warning Bootloader unlocked sign appears
- I can access the fastboot screen on my phone (AP Fastboot Flash Mode (S) 41.11), the one where it says normal powerup, recovery, factory, barcodes, bp tools and qcom. When I connect via USB it says USB connected.
- I can get access the recovery rom TWRP (v2.8.5.0)
- When I try to push a ROM to my sdcard command line tells me "error: device not found".
aaand that's it. I really hope I didn't brick my phone.
I'm on Windows 7 x64 and I would really appreciate the communities help. After that I'll show myself out and leave my phone working for a while hopefully.
edit: one more thing. my phone gets recognized as "Fastboot falcon S" in windows when I plug it in while in fastboot flash mode and as XT1032 when TWRP is booted. obviously it doesn't get recognized as a volume in Windows Explorer, or I would have already transfered another rom on the SD card by now.
edit 2: I also tried connecting the phone via another windows 7 x64 laptop now. installed motorola device manager & minimal adb and fastboot, but same thing there. :|
edit 3:ISSUE RESOLVED for now. I used this: http://forum.xda-developers.com/moto-g/general/gpe-lollipop-5-1-1click-installer-t3075522 and it worked like a charm. Thanks everyone.

@covecove until there is fastboot, there is hope.

[Completed] How to install ROM on Vonino Pluri Q8 tablet ?

Hi there,
Today i've received this tablet. All good and dandy until it notified me it has an update so obviously i've gone and do the update. Surprise.. after reboot, update installment and so on the device won't boot anymore at all, and recover mode doesn't work to enter.
I've found official ROM package on their site:
ftp.vonino.org/public/Firmware/Vonino_Tablets/Pluri%20Q8/Orange%20Version/Android%206.0/
Tablet can connect to the PC, but it isn't recognized because "some drivers" missing. How can i install this ROM on the tablet from my pc ?
Thank you.

Hi,
I can't find anything about it on xda or anywhere. You'll need to contact the manufacturer for drivers and instructions on flashing their firmware.
Good luck!

After i tried like almost the entire day i got the tablet in rescue mode or fastboot mode..
I've wiped/data or factory reset and the same happens... it stays in a loop when boot at logo.
I've let it to do so until the battery went dead from 100% and still the same.
I have official ROM but can't install it at all. I think the bootloader is locked?! And it doesnt even unlock it when using some fastboot commands
Also can't install nothing from SD card and when tryin to use ADB the PC can't see the device, but when using fastboot I can work on it.
In rescue mode i've done some root integrity check and at the end of the check some /system files are modified. I believe this is causing the entire problem.

denede said:
After i tried like almost the entire day i got the tablet in rescue mode or fastboot mode..
I've wiped/data or factory reset and the same happens... it stays in a loop when boot at logo.
I've let it to do so until the battery went dead from 100% and still the same.
I have official ROM but can't install it at all. I think the bootloader is locked?! And it doesnt even unlock it when using some fastboot commands
Also can't install nothing from SD card and when tryin to use ADB the PC can't see the device, but when using fastboot I can work on it.
In rescue mode i've done some root integrity check and at the end of the check some /system files are modified. I believe this is causing the entire problem.
Click to expand...
Click to collapse
Typically, on devices I know of, it's fastboot that you would use to flash factory images. So you should be good there. But again, I don't know if that is how your device works too. And it would also typically not matter what's been altered on your device, system wise, you would simply flash the appropriate images with fastboot.
So I'd still say you need to determine the correct procedure to flash the files you got from their site. Perhaps there site has instructions? Or a support number for help of its not working as it should?

I've talked with the support. They gave me a link with an official ROM, a different one that the one that was from the site. But they didn't even told how to use it, LOL.
Have the damn files and don't know what to do with them, OMG.
I've placed the zip archive on SD card and tried to use the option from rescue mode with 'update via sd card". The zip archive is visible but after i select it says Installation aborted :|
I've googled around and maybe my tablet needs to be at over 50% power... but it was plugged into the wall it should've worked.
edit: 100% and no good...
edit2: they sent me another e-mail with a pdf file in which it is explained how to flash their device.