I flashed magisk after stock zip of 11.0.3.0. But I cannot boot into the system. It will boot into TWRP automatically. Could you please help me out? Thanks!
Magisk makes a backup of your boot image. Either flash that, or extract the boot image from the rom and flash that. You won't have root, but it's better than a bootloop. I'm having a similar problem, if I flash Magisk my phone reboots into fastboot. And I can't get TWRP to stick. If I flash TWRP and my phone boots, the next time I go into recovery I'm back to stock recovery.
I had to perform a fresh android 10, then orange fox and then magisk. No issues at all.
Same problems with me
Gửi từ Mi MIX 3 của tôi bằng cách sử dụng Tapatalk
I finally got it working after running Magisk Uninstaller, maybe I just got lucky.
Related
So, i have used my whole saturday on unlocking the booloader which was the easiest and quickest and then trying to root, but that has failed every time. I first flashed the stock firmware zip 9.0.2 then I go back I dont reboot and flash the twrp and magisk zip and then it wont boot up,
when I try rebooting after flashing the firmware back to the system it sends me to the firmware,
when I try flashing a new firmware and then boot into fastboot then twrp and flash magisk it wont boot up,
and when I do the same only with twrp it wont neither.
I have tried sevel magisk versions, 17.1,17.2,17.3 none of them worked
as for the twrp blu spark or the one from the twrp website, i was always able to boot into twrp but not really to flash it as that would end in a twrp loop
can PLEASE anyone, someone, with a good heart and patience help me ? im really loosing my ****s over this
:fingers-crossed::fingers-crossed:
Try booting into blu_spark twrp
Installing blu_spark twrp
Rebooting to blu_spark twrp
Install magisk 17.3 or 17.1 (I am using 17.3 because it it beta but less stable.)
Faaris Ansari said:
Try booting into blu_spark twrp
Installing blu_spark twrp
Rebooting to blu_spark twrp
Install magisk 17.3 or 17.1 (I am using 17.3 because it it beta but less stable.)
Click to expand...
Click to collapse
can you provide me with the files ? plus
does it make a difference if I take these twrps compared to the one im using from their website ? because I dont see how this can be the fault ?
galaxyss8 said:
can you provide me with the files ? plus
does it make a difference if I take these twrps compared to the one im using from their website ? because I dont see how this can be the fault ?
Click to expand...
Click to collapse
The normal twrp is known to be buggy on the OnePlus 6 since there was encryption and stuff. Here is the blu_spark twrp IMG to boot:
https://forum.xda-developers.com/devdb/project/dl/?id=30485
And here you need to flash the blu_spark twrp: https://forum.xda-developers.com/devdb/project/dl/?id=30484
Flash that then reboot into recovery again
Then flash magisk
If this doesn't work for you I think there is another way.
Faaris Ansari said:
The normal twrp is known to be buggy on the OnePlus 6 since there was encryption and stuff. Here is the blu_spark twrp IMG to boot:
https://forum.xda-developers.com/devdb/project/dl/?id=30485
And here you need to flash the blu_spark twrp: https://forum.xda-developers.com/devdb/project/dl/?id=30484
Flash that then reboot into recovery again
Then flash magisk
If this doesn't work for you I think there is another way.
Click to expand...
Click to collapse
ive done that now and im waiting again in the; the boot loader is unlocked and software integrety.. winodw
im waiting now for some minutes, i flashed the blu spark zip pressed back went to reboot pressed on reboot to recovery and flashed magisk and then reboot to system, thats where i am now
galaxyss8 said:
ive done that now and im waiting again in the; the boot loader is unlocked and software integrety.. winodw
im waiting now for some minutes, i flashed the blu spark zip pressed back went to reboot pressed on reboot to recovery and flashed magisk and then reboot to system, thats where i am now
Click to expand...
Click to collapse
You might be on the wrong slot. DO you even have a system to boot to? Not sure why you even tyred flashing the 9.0.2 ROM. If I was you I would start over. Use the fastboot ROM to get a clean wiped system booting. After that
fastboot boot bluespark twrp v86. Img
Flash bluespark twrp v86. Zip
Reboot revovery
Flash magisk 17.1
yldlj said:
You might be on the wrong slot. DO you even have a system to boot to? Not sure why you even tyred flashing the 9.0.2 ROM. If I was you I would start over. Use the fastboot ROM to get a clean wiped system booting. After that
fastboot boot bluespark twrp v86. Img
Flash bluespark twrp v86. Zip
Reboot revovery
Flash magisk 17.1
Click to expand...
Click to collapse
I flashed the rom because my phone didn't boot up anymore after either flashing TWRP or magisk.
Why should I use the fastboot room, what is the benefit if I use it.
Is the reboot to recovery necessary ? I feel like that part is actually not working properly ?
galaxyss8 said:
I flashed the rom because my phone didn't boot up anymore after either flashing TWRP or magisk.
Why should I use the fastboot room, what is the benefit if I use it.
Is the reboot to recovery necessary ? I feel like that part is actually not working properly ?
Click to expand...
Click to collapse
Yes the reboot to recovery is the most nessesary part of it as it will change slots.
You can try boot to recovery
Flash oos full rom
Flash bluespark twrp. Zip
Reboot recovery
Flash full ROM again
Flash bluespark twrp. Zip again.
Reboot recovery
Flash magisk.
yldlj said:
Yes the reboot to recovery is the most nessesary part of it as it will change slots.
You can try boot to recovery
Flash oos full rom
Flash bluespark twrp. Zip
Reboot recovery
Flash full ROM again
Flash bluespark twrp. Zip again.
Reboot recovery
Flash magisk.
Click to expand...
Click to collapse
Can you explain how to properly boot back into recovery?
Previously I either just went on the back button and flashed the other Zip's or I went back to the reboot overview and pressed recovery there but that also did not seem to work properly I think.
galaxyss8 said:
Can you explain how to properly boot back into recovery?
Previously I either just went on the back button and flashed the other Zip's or I went back to the reboot overview and pressed recovery there but that also did not seem to work properly I think.
Click to expand...
Click to collapse
Just press back button in Recovery/ reboot / choose recovery.
Hey everyone,
My TWRP has been erased from the phone and all I did was update magisk to the latest version (v 20). I'm on Android Pie, why did that happen? I can boot the phone and everything looks fine, it's just that TWRP is gone.
Should I just install it again ? Will I lose data if I install latest TWRP ?
THanks
Hmm.. i dont know what's happened to yours.. but i also updated my magisk to v20. And all.is well.. when i checked thru it a while ago... I can still boot to twrp..
Are you using the v70 twrp?? Try flashing it again via magisk.. be sure to flash magisk.again after that.. ??
santiagoruel13 said:
Hmm.. i dont know what's happened to yours.. but i also updated my magisk to v20. And all.is well.. when i checked thru it a while ago... I can still boot to twrp..
Are you using the v70 twrp?? Try flashing it again via magisk.. be sure to flash magisk.again after that..
Click to expand...
Click to collapse
No, I was using an old version of TWRP, don't remember what it was exactly, but it wasn't the latest one for sure.
What would be the correct steps to flash TWRP and Magisk so my phone boots up and I don't lose data?
Boot to twrp using fastboot then install twrp and magisk then proceed to reboot to system
Phantom Thief said:
Boot to twrp using fastboot then install twrp and magisk then proceed to reboot to system
Click to expand...
Click to collapse
same here. can't permanetly install twrp as recovery
Same here... I tried to install TWRP again and, at a certain point, phone couldn't even boot. I had to fastboot boot img, flash installer and then magisk 19.3. Now it all works
I was already on 3.3.1-70 ofc
Jack_Sparrow_ said:
Same here... I tried to install TWRP again and, at a certain point, phone couldn't even boot. I had to fastboot boot img, flash installer and then magisk 19.3. Now it all works
I was already on 3.3.1-70 ofc
Click to expand...
Click to collapse
which twrp version u use?
lee0525 said:
which twrp version u use?
Click to expand...
Click to collapse
Not the bluspark, the other one
I got the same issue, twrp is gone after update magisk to v20
what is the right way to install twrp from magisk v20?
I downloaded twrp .70
tnx
mikek753 said:
I got the same issue, twrp is gone after update magisk to v20
what is the right way to install twrp from magisk v20?
I downloaded twrp .70
tnx
Click to expand...
Click to collapse
looks like there is an issue with the latest magisk update. We'll have to wait for an update to the magisk or twrp so TWRP can stick
To fix it i booted into twrp then installed the last rom i was using (pie) then flashed twrp.zip, rebooted into recovery then installed magisk 19.4. you'll have to re-install your modules and re enable your apps that used root.
so since I'm using PIE 9.5.13. Just install the full zip of 9.5.13 through local storage > And then flash twrp and then magisk through twrp? Will there be data loss?
I got twrp back, in magisk by install twrp.
magic download I run flash the twrp and recovery is back
there was no any data loss in my case
For those have the same issue, here is the solution without flashing a new ROM.
https://github.com/topjohnwu/Magisk/issues/1920
from bootloader mode execute
fastboot flash boot boot.img (the stock boot.img)
boot twrp image (I used .70 unified)
fastboot boot twrp.img
flash twrp-installer.zip
flash magisk.zip (I flashed 19.4)
Enjoyyyyy
PS: you can get your corresponding stock boot.img from
https://www.oneplus7tips.com/category/oneplus-7-pro/kernels/
lee0525 said:
For those have the same issue, here is the solution without flashing a new ROM.
https://github.com/topjohnwu/Magisk/issues/1920
from bootloader mode execute
fastboot flash boot boot.img (the stock boot.img)
boot twrp image (I used .70 unified)
fastboot boot twrp.img
flash twrp-installer.zip
flash magisk.zip (I flashed 19.4)
Enjoyyyyy
PS: you can get your corresponding stock boot.img from
https://www.oneplus7tips.com/category/oneplus-7-pro/kernels/
Click to expand...
Click to collapse
Thank you.....
New to the OP7 Pro and this post saved me... I got my device last week and Magisk v20 was current and removed TWRP.... There is a Magisk 21 update is that safe or just say right here?
Ive tried uninstalling magisk using the un-installer and no go. Ive tried booting into twrp then flashing the twrp zip then rebooting into recovery and it goes to the stock recovery. How do i get back TWRP?? Im on Pie and was using twrp .65
NVM: I had to re-flash 9.5.11 then twrp then reboot then magisk 19.4
I am in your same situation oneplus7.
Currently I was with twrp 3.3.1.1 but there is no way to catch any recovery. By flashing the image either version 1/65/70 (more current) by fastboot it enters correctly img you access twrp to later flash the zip But it never gets installed.
I tried to uninstall using img twrp Magisk zip uninstaller and install the 19.3 / 20v uninstall it completely and flash back to zip twrp but I am in a dead end.
Right now I am with Magisk v20 root edxposed and everything goes phenomenally as a result that I am going to "peel" without having twrp for my backups or anything.
Anyone have any idea how to install twrp again?
boot into twrp.img then flash the last rom you were using, then flash twrp.zip, reboot into recovery and install magisk 19.4. After reboot you will have to enable all your rooted apps again and install your magisk modules again.
So yea I tried to follow this guide
https://forum.xda-developers.com/on...-flash-twrp-root-t3954559/page11#post80840591
And I kinda messed up. The main mistake that I think I did was I used "Install Recovery Ramdisk" and selected the TWRP.img
Can anyone help? Can I undo that?
twrp is supposed to be done like that should flash magisk after and it will boot always flash magisk after twrp or it wont boot after magisk you flash kernel
Flash OOS through Fastboot
you should be able to either flash the TWRP installer zip or flash your current OS in TWRP.
Thanks everyone, everything's working now
I have twrp on one recovery and shrp on the other. I install my rom through shrp, but when I go to recovery through the system, it boots into twrp. I had been using Havoc os and it crashed and booted into mi 11 (It's fixed now) and I'm wondering if this is the cause. Is having two recoveries bad and if so, how do I get rid of one of them? Which aprtition should I be putting the recovery in?