Hey everyone,
My TWRP has been erased from the phone and all I did was update magisk to the latest version (v 20). I'm on Android Pie, why did that happen? I can boot the phone and everything looks fine, it's just that TWRP is gone.
Should I just install it again ? Will I lose data if I install latest TWRP ?
THanks
Hmm.. i dont know what's happened to yours.. but i also updated my magisk to v20. And all.is well.. when i checked thru it a while ago... I can still boot to twrp..
Are you using the v70 twrp?? Try flashing it again via magisk.. be sure to flash magisk.again after that.. ??
santiagoruel13 said:
Hmm.. i dont know what's happened to yours.. but i also updated my magisk to v20. And all.is well.. when i checked thru it a while ago... I can still boot to twrp..
Are you using the v70 twrp?? Try flashing it again via magisk.. be sure to flash magisk.again after that..
Click to expand...
Click to collapse
No, I was using an old version of TWRP, don't remember what it was exactly, but it wasn't the latest one for sure.
What would be the correct steps to flash TWRP and Magisk so my phone boots up and I don't lose data?
Boot to twrp using fastboot then install twrp and magisk then proceed to reboot to system
Phantom Thief said:
Boot to twrp using fastboot then install twrp and magisk then proceed to reboot to system
Click to expand...
Click to collapse
same here. can't permanetly install twrp as recovery
Same here... I tried to install TWRP again and, at a certain point, phone couldn't even boot. I had to fastboot boot img, flash installer and then magisk 19.3. Now it all works
I was already on 3.3.1-70 ofc
Jack_Sparrow_ said:
Same here... I tried to install TWRP again and, at a certain point, phone couldn't even boot. I had to fastboot boot img, flash installer and then magisk 19.3. Now it all works
I was already on 3.3.1-70 ofc
Click to expand...
Click to collapse
which twrp version u use?
lee0525 said:
which twrp version u use?
Click to expand...
Click to collapse
Not the bluspark, the other one
I got the same issue, twrp is gone after update magisk to v20
what is the right way to install twrp from magisk v20?
I downloaded twrp .70
tnx
mikek753 said:
I got the same issue, twrp is gone after update magisk to v20
what is the right way to install twrp from magisk v20?
I downloaded twrp .70
tnx
Click to expand...
Click to collapse
looks like there is an issue with the latest magisk update. We'll have to wait for an update to the magisk or twrp so TWRP can stick
To fix it i booted into twrp then installed the last rom i was using (pie) then flashed twrp.zip, rebooted into recovery then installed magisk 19.4. you'll have to re-install your modules and re enable your apps that used root.
so since I'm using PIE 9.5.13. Just install the full zip of 9.5.13 through local storage > And then flash twrp and then magisk through twrp? Will there be data loss?
I got twrp back, in magisk by install twrp.
magic download I run flash the twrp and recovery is back
there was no any data loss in my case
For those have the same issue, here is the solution without flashing a new ROM.
https://github.com/topjohnwu/Magisk/issues/1920
from bootloader mode execute
fastboot flash boot boot.img (the stock boot.img)
boot twrp image (I used .70 unified)
fastboot boot twrp.img
flash twrp-installer.zip
flash magisk.zip (I flashed 19.4)
Enjoyyyyy
PS: you can get your corresponding stock boot.img from
https://www.oneplus7tips.com/category/oneplus-7-pro/kernels/
lee0525 said:
For those have the same issue, here is the solution without flashing a new ROM.
https://github.com/topjohnwu/Magisk/issues/1920
from bootloader mode execute
fastboot flash boot boot.img (the stock boot.img)
boot twrp image (I used .70 unified)
fastboot boot twrp.img
flash twrp-installer.zip
flash magisk.zip (I flashed 19.4)
Enjoyyyyy
PS: you can get your corresponding stock boot.img from
https://www.oneplus7tips.com/category/oneplus-7-pro/kernels/
Click to expand...
Click to collapse
Thank you.....
New to the OP7 Pro and this post saved me... I got my device last week and Magisk v20 was current and removed TWRP.... There is a Magisk 21 update is that safe or just say right here?
Related
Guys i faced a wierd problem . I flashed twrp image and then twrp zip and then magisk ..i rebooted and when i tried to boot in recovery . The recovery was gone but magisk is still . What should i doo nowwww ?
What you do now is you
fastboot boot blu_sparktwrp.img
And then in twrp you flash blu_sparktwrp.zip
Reboot to twrp
Flash magisk 17.2.Zip
Done..rebot.
whizeguy said:
What you do now is you
fastboot boot blu_sparktwrp.img
And then in twrp you flash blu_sparktwrp.zip
Reboot to twrp
Flash magisk 17.2.Zip
Done..rebot.
Click to expand...
Click to collapse
It didnt work ....it goes away after a reboot
sanu26661 said:
It didnt work ....it goes away after a reboot
Click to expand...
Click to collapse
It must work. You're basically flashing TWRP temporarily, so when you are in TWRP for the first time, you have to flash the zip file so that it stays installed. Try that again, maybe you did something wrong, but it has to work, you just need the .img that you flash with your PC, and the .zip that you flash using TWRP when you boot into it the first time.
Kluxe Nobody said:
It must work. You're basically flashing TWRP temporarily, so when you are in TWRP for the first time, you have to flash the zip file so that it stays installed. Try that again, maybe you did something wrong, but it has to work, you just need the .img that you flash with your PC, and the .zip that you flash using TWRP when you boot into it the first time.
Click to expand...
Click to collapse
I booted img first then installed zip but when i reboot to recovery thers only stock recovery present ...did like 10 times results are same
the blu_spark twrp? v2?
If twrp isn't sticking, from my experience is to lock bootloader, flash stock OS and start from scratch.....
Do not flash stock with unlocked bootloader
So, i have used my whole saturday on unlocking the booloader which was the easiest and quickest and then trying to root, but that has failed every time. I first flashed the stock firmware zip 9.0.2 then I go back I dont reboot and flash the twrp and magisk zip and then it wont boot up,
when I try rebooting after flashing the firmware back to the system it sends me to the firmware,
when I try flashing a new firmware and then boot into fastboot then twrp and flash magisk it wont boot up,
and when I do the same only with twrp it wont neither.
I have tried sevel magisk versions, 17.1,17.2,17.3 none of them worked
as for the twrp blu spark or the one from the twrp website, i was always able to boot into twrp but not really to flash it as that would end in a twrp loop
can PLEASE anyone, someone, with a good heart and patience help me ? im really loosing my ****s over this
:fingers-crossed::fingers-crossed:
Try booting into blu_spark twrp
Installing blu_spark twrp
Rebooting to blu_spark twrp
Install magisk 17.3 or 17.1 (I am using 17.3 because it it beta but less stable.)
Faaris Ansari said:
Try booting into blu_spark twrp
Installing blu_spark twrp
Rebooting to blu_spark twrp
Install magisk 17.3 or 17.1 (I am using 17.3 because it it beta but less stable.)
Click to expand...
Click to collapse
can you provide me with the files ? plus
does it make a difference if I take these twrps compared to the one im using from their website ? because I dont see how this can be the fault ?
galaxyss8 said:
can you provide me with the files ? plus
does it make a difference if I take these twrps compared to the one im using from their website ? because I dont see how this can be the fault ?
Click to expand...
Click to collapse
The normal twrp is known to be buggy on the OnePlus 6 since there was encryption and stuff. Here is the blu_spark twrp IMG to boot:
https://forum.xda-developers.com/devdb/project/dl/?id=30485
And here you need to flash the blu_spark twrp: https://forum.xda-developers.com/devdb/project/dl/?id=30484
Flash that then reboot into recovery again
Then flash magisk
If this doesn't work for you I think there is another way.
Faaris Ansari said:
The normal twrp is known to be buggy on the OnePlus 6 since there was encryption and stuff. Here is the blu_spark twrp IMG to boot:
https://forum.xda-developers.com/devdb/project/dl/?id=30485
And here you need to flash the blu_spark twrp: https://forum.xda-developers.com/devdb/project/dl/?id=30484
Flash that then reboot into recovery again
Then flash magisk
If this doesn't work for you I think there is another way.
Click to expand...
Click to collapse
ive done that now and im waiting again in the; the boot loader is unlocked and software integrety.. winodw
im waiting now for some minutes, i flashed the blu spark zip pressed back went to reboot pressed on reboot to recovery and flashed magisk and then reboot to system, thats where i am now
galaxyss8 said:
ive done that now and im waiting again in the; the boot loader is unlocked and software integrety.. winodw
im waiting now for some minutes, i flashed the blu spark zip pressed back went to reboot pressed on reboot to recovery and flashed magisk and then reboot to system, thats where i am now
Click to expand...
Click to collapse
You might be on the wrong slot. DO you even have a system to boot to? Not sure why you even tyred flashing the 9.0.2 ROM. If I was you I would start over. Use the fastboot ROM to get a clean wiped system booting. After that
fastboot boot bluespark twrp v86. Img
Flash bluespark twrp v86. Zip
Reboot revovery
Flash magisk 17.1
yldlj said:
You might be on the wrong slot. DO you even have a system to boot to? Not sure why you even tyred flashing the 9.0.2 ROM. If I was you I would start over. Use the fastboot ROM to get a clean wiped system booting. After that
fastboot boot bluespark twrp v86. Img
Flash bluespark twrp v86. Zip
Reboot revovery
Flash magisk 17.1
Click to expand...
Click to collapse
I flashed the rom because my phone didn't boot up anymore after either flashing TWRP or magisk.
Why should I use the fastboot room, what is the benefit if I use it.
Is the reboot to recovery necessary ? I feel like that part is actually not working properly ?
galaxyss8 said:
I flashed the rom because my phone didn't boot up anymore after either flashing TWRP or magisk.
Why should I use the fastboot room, what is the benefit if I use it.
Is the reboot to recovery necessary ? I feel like that part is actually not working properly ?
Click to expand...
Click to collapse
Yes the reboot to recovery is the most nessesary part of it as it will change slots.
You can try boot to recovery
Flash oos full rom
Flash bluespark twrp. Zip
Reboot recovery
Flash full ROM again
Flash bluespark twrp. Zip again.
Reboot recovery
Flash magisk.
yldlj said:
Yes the reboot to recovery is the most nessesary part of it as it will change slots.
You can try boot to recovery
Flash oos full rom
Flash bluespark twrp. Zip
Reboot recovery
Flash full ROM again
Flash bluespark twrp. Zip again.
Reboot recovery
Flash magisk.
Click to expand...
Click to collapse
Can you explain how to properly boot back into recovery?
Previously I either just went on the back button and flashed the other Zip's or I went back to the reboot overview and pressed recovery there but that also did not seem to work properly I think.
galaxyss8 said:
Can you explain how to properly boot back into recovery?
Previously I either just went on the back button and flashed the other Zip's or I went back to the reboot overview and pressed recovery there but that also did not seem to work properly I think.
Click to expand...
Click to collapse
Just press back button in Recovery/ reboot / choose recovery.
Hello, So i tried to install GPS joystick privacy mode app as a system app first thru titanium backup then ..., i rebooted and now im on boot loop, what do i do?
Any help is appreciated, Thanks
{Mod edited}
Hold Power + vol up + vol down for several seconds should put you in bootloader. Or alteranately, Power+vol down for several seconds should send you to TWRP if you have it installed. From there, I'm thinking you may need to flash the stock ROM again, since you were messing with the system partition, and the phone is not booting now. Either flash stock ROM in TWRP, or use the fastboot stock ROM.
I didn't have twrp installed and i still dont, i patched the boot image with magisk and all i have is root cause i cant seem to keep TWRP installed after 9.5.3, im currently on 10.3.0
cmurder61 said:
I didn't have twrp installed and i still dont, i patched the boot image with magisk and all i have is root cause i cant seem to keep TWRP installed after 9.5.3, im currently on 10.3.0
Click to expand...
Click to collapse
You should be able to fastboot flash stock boot.img from the fastboot ROMs to get the phone running again: https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
This will unroot the phone. But you should be able to easily root again by the method you did originally.
What is the problem you are having with installing TWRP? You haven't specifically described how you tried to install. I've had no issues using the TWRP installer zip, after multiple updates.
You need to re flash stock so, boot lastest twrp (fastboot boot twrp.img) and flash lastest stock rom.
And if you need an app as system use magisk module App Systemizer (you also need busybox module and Termux app from playstore) this is the only way (that I known) to convert user apps to system
Sent from my OnePlus7Pro using XDA Labs
redpoint73 said:
You should be able to fastboot flash stock boot.img from the fastboot ROMs to get the phone running again: https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
This will unroot the phone. But you should be able to easily root again by the method you did originally.
What is the problem you are having with installing TWRP? You haven't specifically described how you tried to install. I've had no issues using the TWRP installer zip, after multiple updates.
Click to expand...
Click to collapse
Ive tried that it only boots to recivery, i restarted my phone completely with msm its wokring fine now but even after i root on 10.3.0 i still cant get twrp
when i try to install "fastboot flash twrp" it goes thru but it always boot loops to fastboot but when i flash the stock boot image it goes to normal and i can boot into the phone again
RokCruz said:
You need to re flash stock so, boot lastest twrp (fastboot boot twrp.img) and flash lastest stock rom.
And if you need an app as system use magisk module App Systemizer (you also need busybox module and Termux app from playstore) this is the only way (that I known) to convert user apps to system
Sent from my OnePlus7Pro using XDA Labs
Click to expand...
Click to collapse
tried that first part too, cant get into twrp and that makes sense now, i installed busy box but never opened the app to install to system/xbin
here's how ive done my part so far.. ever since i bricked my device last feb 24 , rendering it totally unresponsive.. that not even vol up & power button dont work
1. had to use msm tool just to boot my device. successfully boot my device to 9.5.3
2. device seemed to have a locked bootloader again so i un.lock it again. downloaded a patched 9.5.3 boot.img and flashed it via fastboot
3. successful root confirmed..
4. downloaded twrp 3.3.1-75 unofficial installer.. about 17.5mb. flashed it thru magisk as a module.. then install magisk ( as recommended) then reboot.
5. after a reboot.. and setting it up to my liking,, i reboot to twrp to flash the latest 10.3.1 stable rom..
6. flash twrp installer again.
7. hit reboot then choose Recovery . phone reboot to recovery again
8. flash magisk.zip which i downloaded earlier. then reboot.
done
updated to 10.3.1 with magisk & twrp intact..
btw.. i really dont know how to force my phone to reboot to twrp via PC ADB fastboot command.. easiest way for me to install TWRP is by flashing the TWRP INSTALLER as magisk module
cmurder61 said:
tried that first part too, cant get into twrp and that makes sense now, i installed busy box but never opened the app to install to system/xbin
Click to expand...
Click to collapse
Use busybox magisk module, don't install busybox apps!
Sent from my OnePlus7Pro using XDA Labs
cmurder61 said:
when i try to install "fastboot flash twrp" it goes thru but it always boot loops to fastboot but when i flash the stock boot image it goes to normal and i can boot into the phone again
Click to expand...
Click to collapse
That is because that is NOT the correct way to install TWRP img. You need to fastboot boot TWRP, then once in TWRP flash the TWRP installer zip, as I already mentioned.
This is described in the TWRP dev's thread (and you will see no mention of fastboot flash TWRP).
https://forum.xda-developers.com/on...nt/recovery-unofficial-twrp-recovery-t3931322
Also make sure you use a current version of TWRP (latest is unofficial -76) which you can get from the above link.
redpoint73 said:
That is because that is NOT the correct way to install TWRP img. You need to fastboot boot TWRP, then once in TWRP flash the TWRP installer zip, as I already mentioned.
This is described in the TWRP dev's thread (and you will see no mention of fastboot flash TWRP).
https://forum.xda-developers.com/on...nt/recovery-unofficial-twrp-recovery-t3931322
Also make sure you use a current version of TWRP (latest is unofficial -76) which you can get from the above link.
Click to expand...
Click to collapse
ive tried that still didn't work but illl try again i guess
santiagoruel13 said:
here's how ive done my part so far.. ever since i bricked my device last feb 24 , rendering it totally unresponsive.. that not even vol up & power button dont work
1. had to use msm tool just to boot my device. successfully boot my device to 9.5.3
2. device seemed to have a locked bootloader again so i un.lock it again. downloaded a patched 9.5.3 boot.img and flashed it via fastboot
3. successful root confirmed..
4. downloaded twrp 3.3.1-75 unofficial installer.. about 17.5mb. flashed it thru magisk as a module.. then install magisk ( as recommended) then reboot.
5. after a reboot.. and setting it up to my liking,, i reboot to twrp to flash the latest 10.3.1 stable rom..
6. flash twrp installer again.
7. hit reboot then choose Recovery . phone reboot to recovery again
8. flash magisk.zip which i downloaded earlier. then reboot.
done
updated to 10.3.1 with magisk & twrp intact..
btw.. i really dont know how to force my phone to reboot to twrp via PC ADB fastboot command.. easiest way for me to install TWRP is by flashing the TWRP INSTALLER as magisk module
Click to expand...
Click to collapse
See the way u did it is diff, i did not root first before installing twrp or install twrp as a magisk mod, what is the mod for magisk? where do i get it
cmurder61 said:
See the way u did it is diff, i did not root first before installing twrp or install twrp as a magisk mod, what is the mod for magisk? where do i get it
Click to expand...
Click to collapse
i just simplified it as magisk mod.. but in TWRP THREAD,, its named by maoronofrio as TWRP UNIFIED UNOFFICIAL INSTALLER
and it can only be installed by installing it as magisk module
here's the link
https://forum.xda-developers.com/on...nt/recovery-unofficial-twrp-recovery-t3932943
After i tried to install busybox trough magisk manager on my 7 pro i can't boot in to the system anymore, I already deleted all magisk modules trough recovery and it is still booting directly in to fastboot mode.
Is there any way to boot in to the system again without flashing stock rom ?
Twrp is still accessible.
Im running Android 10, the newest magisk and the newest twrp.
Edit: found the solution, i Just used the fix Recovery bootloop option in twrp and it worked all fine but i needed to flash magisk again
powerbuffboy said:
After i tried to install busybox trough magisk manager on my 7 pro i can't boot in to the system anymore, I already deleted all magisk modules trough recovery and it is still booting directly in to fastboot mode.
Is there any way to boot in to the system again without flashing stock rom ?
Twrp is still accessible.
Im running Android 10, the newest magisk and the newest twrp.
Edit: found the solution, i Just used the fix Recovery bootloop option in twrp and it worked all fine but i needed to flash magisk again
Click to expand...
Click to collapse
Hey powerbuffboy, I have the same issue,
I can't seem to find this "fix recovery bootloop" option.
What version of TWRP are you running?
powerbuffboy said:
After i tried to install busybox trough magisk manager on my 7 pro i can't boot in to the system anymore, I already deleted all magisk modules trough recovery and it is still booting directly in to fastboot mode.
Is there any way to boot in to the system again without flashing stock rom ?
Twrp is still accessible.
Im running Android 10, the newest magisk and the newest twrp.
Edit: found the solution, i Just used the fix Recovery bootloop option in twrp and it worked all fine but i needed to flash magisk again
Click to expand...
Click to collapse
You can also try to flash boot.img ... It may fixed the issue
powerbuffboy said:
After i tried to install busybox trough magisk manager on my 7 pro i can't boot in to the system anymore, I already deleted all magisk modules trough recovery and it is still booting directly in to fastboot mode.
Is there any way to boot in to the system again without flashing stock rom ?
Twrp is still accessible.
Im running Android 10, the newest magisk and the newest twrp.
Edit: found the solution, i Just used the fix Recovery bootloop option in twrp and it worked all fine but i needed to flash magisk again
Click to expand...
Click to collapse
Same problem, solved in same way, but i cant install Magisk again without going to bootloop
Cronoss said:
Hey powerbuffboy, I have the same issue,
I can't seem to find this "fix recovery bootloop" option.
What version of TWRP are you running?
Click to expand...
Click to collapse
Go to TWRP/ Advanced and click on Fix Recovery Bootloop
PS.
Im talking about TWRP 3.3.1.79-maurofrio
PPS.
You will lose ROOT
Hey, after installing android 11 on my Oneplus 6 I have servere issues on getting root back.
Both methods I used result in a stuck boot.
Method 1: fastboot boot twrp, then install magisk.zip (tried with both 21.4 (last with a zip) and the renamed 23.0 (from apk to zip)
Method 2: Extracted boot.img from my OTA update, then patched with magisk 23.0.
Flashed the new boot.img -with fastboot -with twrp both result in a stuck boot.
Suprisingly flashing the extracted boot.img from the OTA boots fine, but that image is without magisk
Update: I have extracted the boot.img directly from the phone, patched it and it still doesn't work
I've also tried fastboot boot twrp with a variety of versions of twrp after upgrading to 11.1.1.1 but with no success.
If someone could recommend a verified way to root a op6 with 11.1.1.1 I'd appreciate it
Thratchen said:
I've also tried fastboot boot twrp with a variety of versions of twrp after upgrading to 11.1.1.1 but with no success.
If someone could recommend a verified way to root a op6 with 11.1.1.1 I'd appreciate it
Click to expand...
Click to collapse
twrp actually works, but after flashing magisk or flashing a magisk boot.img it breaks. I have a working version here
Ping me if you get magisk working
I can confirm the TWRP-3.5.2-enchilada-Nebrassy-2.img run on my OP6 without any issue and allowed my to install the latest magisk, giving me a fully functioning root for my 11.1.1.1 ROM. Thanks for the help
To remember!
Thratchen said:
I can confirm the TWRP-3.5.2-enchilada-Nebrassy-2.img run on my OP6 without any issue and allowed my to install the latest magisk, giving me a fully functioning root for my 11.1.1.1 ROM. Thanks for the help
Click to expand...
Click to collapse
Which installation method of magisk did you use?
How long did you wait after first boot?
I downloaded the full 11.1.1.1 ROM as I was upgrading from a previous rooted 10.3.x version. I placed this file in the phones root directory and use the "local upgrade" feature.
When that completed I rebooted the phone a few times just to make sure everything was working as expected. I usually waited 1-2 minutes before rebooting every time.
Next I placed the latest magisk version file into the root of the phone rebooted into the bootloader and performed fastboot boot TWRP-3.5.2-enchilada-Nebrassy-2.img which booted into the TWRP as expected. Then I installed the magisk.zip and rebooted the phone into a nice newly rooted magisk environment. Tbh I didn't wait anymore 10-20 seconds to reboot after installing magisk while in TWRP.
I hope that's helpful for you
Thratchen said:
I downloaded the full 11.1.1.1 ROM as I was upgrading from a previous rooted 10.3.x version. I placed this file in the phones root directory and use the "local upgrade" feature.
When that completed I rebooted the phone a few times just to make sure everything was working as expected. I usually waited 1-2 minutes before rebooting every time.
Next I placed the latest magisk version file into the root of the phone rebooted into the bootloader and performed fastboot boot TWRP-3.5.2-enchilada-Nebrassy-2.img which booted into the TWRP as expected. Then I installed the magisk.zip and rebooted the phone into a nice newly rooted magisk environment. Tbh I didn't wait anymore 10-20 seconds to reboot after installing magisk while in TWRP.
I hope that's helpful for you
Click to expand...
Click to collapse
Thanks for the reply, as a last question: Which magisk version did you use (could you link i?t). I assume you took the magisk v23 apk and renamed it to .zip? or what did you do?
Yes. I used the latest canary build of magisk and simply renamed it to magisk.zip
https://raw.githubusercontent.com/topjohnwu/magisk-files/canary/app-debug.apk
Thratchen said:
Yes. I used the latest canary build of magisk and simply renamed it to magisk.zip
https://raw.githubusercontent.com/topjohnwu/magisk-files/canary/app-debug.apk
Click to expand...
Click to collapse
Hmm, I perfectly copied your instructions and still get a bootloop. Even reflashed 11.1.1.1 again. Might be time for a reset
Do you actually get a bootloop or it just gets stuck in the unlocked bootloader warning screen?
Mine hangs there for several minutes before booting, I reflashed several times because of it but all I had to do is wait.
vkass said:
Do you actually get a bootloop or it just gets stuck in the unlocked bootloader warning screen?
Mine hangs there for several minutes before booting, I reflashed several times because of it but all I had to do is wait.
Click to expand...
Click to collapse
I leave the "bootloader unlocked" screen and the rotating "circle" animation plays. I even can connect via adb logcat to see the boot logs (but I do not understand them, though they clearly loop)
is there a zip version of TWRP-3.5.2-enchilada-Nebrassy-2 available that I can flash or can i flash the standard twrp latest zip after booting in to the nebrassy recovery so that it is permanant recovery?
Also can I flash the latest 23 relase of magisk or does it have to be the canary?
I was able to successfully boot in to the nebrassy recovery but i don't want to get in to a permanent bootloop if the standard twrp zip will break things after flashing or the stable relase of magisk will get me in to a bootloop
Thanks @UraniumDonut !
tacohell said:
is there a zip version of TWRP-3.5.2-enchilada-Nebrassy-2 available that I can flash or can i flash the standard twrp lat est zip after booting in to the nebrassy recovery so that it is permanant recovery?
Also can I flash the latest 23 relase of magisk or does it have to be the canary?
I was able to successfully boot in to the nebrassy recovery but i don't want to get in to a permanent bootloop if the standard twrp zip will break things after flashing or the stable relase of magisk will get me in to a bootloop
Thanks @UraniumDonut !
Click to expand...
Click to collapse
The twrp image should have a button in twrp called "install current twrp to recovery" or similar. With magisk I cannot help you as I have bootloops with every version of magisk , but @Thratchen had success with the canary version (I didn't)
UraniumDonut said:
I leave the "bootloader unlocked" screen and the rotating "circle" animation plays. I even can connect via adb logcat to see the boot logs (but I do not understand them, though they clearly loop)
Click to expand...
Click to collapse
Try to flash the full update zip with twrp, it will flash to both partitions, then try to flash latest magisk renamed apk in twrp.
vkass said:
Try to flash the full update zip with twrp, it will flash to both partitions, then try to flash latest magisk renamed apk in twrp.
Click to expand...
Click to collapse
Thanks, I’ll try. A few questions:
Wipe dalvik after flash?
Boot into system or instant flash magisk?
Wipe dalvik after magisk?
Which magisk?(canary or 23.0)?
Thanks!
UraniumDonut said:
The twrp image should have a button in twrp called "install current twrp to recovery" or similar. With magisk I cannot help you as I have bootloops with every version of magisk , but @Thratchen had success with the canary version (I didn't)
Click to expand...
Click to collapse
Thhank @UraniumDonut - that worked - I have never before used that method and honestly didn't even know about it. I use the official documented twrp way which is to first fastboot in to twrp and then install the zip file which has to be located on the phone file system. This method seems a lot easier!
As to magisk, I usually flash that from twrp using the zip file method and never have had any issues. But with all the issues surrounding oos 11 I am playing it safe as I don't want to get in to a boot loop. Will do some more research before I try something. But thanks to you I have made 1 step forward progress!
UraniumDonut said:
Thanks, I’ll try. A few questions:
Wipe dalvik after flash?
Boot into system or instant flash magisk?
Wipe dalvik after magisk?
Which magisk?(canary or 23.0)?
Thanks!
Click to expand...
Click to collapse
I wiped
No need to boot first
Wiping once is enough
I'm using 23
I did not install twrp at all, just booted it, flashed Ota and magisk and reboot.
vkass said:
I wiped
No need to boot first
Wiping once is enough
I'm using 23
I did not install twrp at all, just booted it, flashed Ota and magisk and reboot.
Click to expand...
Click to collapse
I'm out of ideas. I followed your guide exactly.
Flashed 11.1.1.1 OTA.zip
The log said "installing to inactive slot _b, reboot recovery to flash more zips"
I wiped dalvik,
I rebooted into recovery slot b (I didnt boot into system)
I installed magisk 23.0 APK renamed to zip. It installed into slot b.
I did not wipe dalvik.
I rebooted into system.
I still get a stuck boot (OnePlus circles rotating)
Bonus: after "fastboot flash boot stock_boot.img" it boots fine (but no root)
I never installed TWRP, just "fastboot boot TWRP"
I understand nothing
Just for reference here
UraniumDonut said:
I'm out of ideas. I followed your guide exactly.
Flashed 11.1.1.1 OTA.zip
The log said "installing to inactive slot _b, reboot recovery to flash more zips"
I wiped dalvik,
I rebooted into recovery slot b (I didnt boot into system)
I installed magisk 23.0 APK renamed to zip. It installed into slot b.
I did not wipe dalvik.
I rebooted into system.
I still get a stuck boot (OnePlus circles rotating)
Bonus: after "fastboot flash boot stock_boot.img" it boots fine (but no root)
I never installed TWRP, just "fastboot boot TWRP"
I understand nothing
Click to expand...
Click to collapse
I posted detailed steps if you want to give this a try @UraniumDonut: https://forum.xda-developers.com/t/how-to-root-op6-11-1-1-1.4344269/#post-85765879