Unbrick my Huawei P30 Demo Mode - Huawei P30 Questions & Answers
Good day,
Please give advice on how to load a functional FW into my Huawei P30. Originally, he had an EMUI 9 phone in it. I tried to upload fw with Android 10 EMUI 10 via USB OTG, fw was uploaded, and after restart, a screen with the following message appeared: Your Device has failed verification and may not work properly. I tried to upload pink fw, what I found on the internet, some of them will be uploaded, some of them will pop up with the error that they cannot be recorded, but the result is still the same. So if someone could advise what I would love to do. I apologize for my English. Thank you
Joukers said:
Good day,
Please give advice on how to load a functional FW into my Huawei P30. Originally, he had an EMUI 9 phone in it. I tried to upload fw with Android 10 EMUI 10 via USB OTG, fw was uploaded, and after restart, a screen with the following message appeared: Your Device has failed verification and may not work properly. I tried to upload pink fw, what I found on the internet, some of them will be uploaded, some of them will pop up with the error that they cannot be recorded, but the result is still the same. So if someone could advise what I would love to do. I apologize for my English. Thank you
Click to expand...
Click to collapse
In order to revive your demo device, you should flash a dload firmware according to your cust ELE-L29 C891 (as i can see from your fastboot oem get-build-number you have ELE-L29 9.1.0.161D C891E6R2P2). Unfortunatelly, there is no dload firmware for your cust atm so you could revive it. Flashing any other dload firmware (from C431/C432/C605 or another ones) will keep your device softbricked .
You have 2 options atm; WAIT for Huawei release of dload firmware for ELE-L29 C891 or change your motherboard at any service center (Huawei's own Service Centers won't do it, because yours is a demo unit and they might even hold on of it, because those demo units are their own property and are not for sale).
Sent from my LIO-L29 using Tapatalk
Joukers said:
Good day,
Please give advice on how to load a functional FW into my Huawei P30. Originally, he had an EMUI 9 phone in it. I tried to upload fw with Android 10 EMUI 10 via USB OTG, fw was uploaded, and after restart, a screen with the following message appeared: Your Device has failed verification and may not work properly. I tried to upload pink fw, what I found on the internet, some of them will be uploaded, some of them will pop up with the error that they cannot be recorded, but the result is still the same. So if someone could advise what I would love to do. I apologize for my English. Thank you
Click to expand...
Click to collapse
Hi, you can go back to the basic version via the box from the computer
mouraj2 said:
Hi, you can go back to the basic version via the box from the computer
Click to expand...
Click to collapse
???
I've just done a similar thing with my p30 lite
---------- Post added at 10:47 AM ---------- Previous post was at 10:16 AM ----------
I've just done a similar thing with my p30 lite, did you find a way to get to USB update?
Contact me
huawei p30 demo version
i tried to update to android 10 , using hisuite proxi.
device flashed recovery files in hi suite, and after restart phone dont have erecovery, dload, dont boot.
it have only fastboot and ofcorce dont allow any flash file in fastboot mode.
any advice?
thanks
(bootloader) ELE-L29
OKAY [ 0.007s]
finished. total time: 0.008s
C:\adb>fastboot getvar vendorcountry
vendorcountry: demo/eea
finished. total time: 0.017s
C:\adb>fastboot oem get-build-number
...
(bootloader) :ELE-L29 9.1.0.156D(C432E4)
OKAY [ 0.009s]
finished. total time: 0.010s
C:\adb>fastboot getvar rescue_enter_recovery
rescue_enter_recovery: start to hisuite mode!
finished. total time: 0.011s
C:\adb>fastboot oem oeminforead-SYSTEM_VERSION
< waiting for any device >
...
FAILED (remote: read oeminfo item failed)
finished. total time: 0.025s
No free way to fix it
mutahharbashir said:
Contact me
Click to expand...
Click to collapse
Hi/////Did you help me delete demo for my Huawei p30 Pro
Related
Flash DoomKernel to Xperia S
I am currently flashing the DoomKernel to må Sony Xperia S smartphone, using the installation guide from here; http://forum.xda-developers.com/showthread.php?t=1573184 When I start the flashing with the command: flash boot NAME-OF-IMAGE.img I get this message: sending 'boot' <9106 KB>... It have not changed the last ½ hour and I am worried that it may be stuck. There are no errors yet. How long time does it usually take to flash DoomKernels ROM? If it is stuck what can cause it? And are there any solutions? I have tried to google these answers without luck, so hope some kan help me here.
After 2 hours I get at "To many lines" failure. I am trying using flashtool instead of fastboot commands.
Xperia C3 Dual Forgot Password : Failed Unlock Bootloader
Helo there, My friend ask me to help him with his forgot password Xperia C3. This is what i've dong : tried to flash it using flashtool (Androxyde) Asking to unlock bootloader, so i turn to sony web and succed getting the unlock code Turn Back to flashtool and use the BLU menu to unlock, and it gave me error message " FAILED (command write failed (Too many links)" finished. total time: -0.000s I also tried the fastboot command, and it produces the same error.. Search on forum, some ppl says that it in the setting menu on android, the unlock button. But how can get to the menu, if i can't login into the machine? Please check my attach picture. Is there solution for this? Thanks.
Huawei Y6 Pro 2017 / root & bootloop
Hello everybody, Can anybody help me further. I've been trying to install TWRP, since then I'm stuck in bootloop. The security warning is displayed briefly and then the display is black and the LED lights red. Or where do I recover the original recovery? The funny thing is that the emei shows me a P9 lite mini. My build version: SLA-L22C432B132 Thanks in advance.
Can anyone help me?
budanzew said: Can anyone help me? Click to expand... Click to collapse Hi and welcome! Three months ago, I wrote a guide for a similar issue. Try to take a look here. Any question? ---------- Post added at 07:52 PM ---------- Previous post was at 07:27 PM ---------- If you don't want a newer build, you can download this, it's the B132 firmware. Just extract RECOVERY.img and flash it.
Huawei Y6 Pro 2017 firmware upgrade Hi, B132 was released in August, it's very out of date. I would heartily recommend installing the latest FullOTA-MF firmware build: SLA-L22C432B150 If dual-SIM, B150. If single-SIM B151.
In order to recover Android properly, it's necessary to discover which build number is installed now on your phone. So please, turn off your phone. Plug your phone to a computer by a usb cable, then hold down simultaneously the volume down button and the power button, so that the FASTBOOT&RESCUE MODE can start on your phone. Then, on Windows, run a command prompt as administrator and move to the directory where there are fastboot and adb. Now, type and enter the following command: Code: fastboot oem get-build-number Then, please, post the returned result, thanks.
(bootloader) SLA-L22C432B132 OKAY [ 0.002s] finished. total time: 0.002s I have flash the B150 but the mobile doesnt boot. The Mobile starts i see the Huawei logo and than restart again.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1923/g1650/v98998/f1/full/update.zip Here you can find the B132, try with this, and after, boot into stock recovery and do a "Wipe Data/Factory reset" and a "wipe cache". Ask me for doubts. ---------- Post added at 03:42 PM ---------- Previous post was at 02:56 PM ---------- It happened to me a couple of times few months ago. The device made 3 reboots and asked me for a factory reset. Yours too? ---------- Post added at 03:57 PM ---------- Previous post was at 03:42 PM ---------- In your case, just to flash RECOVERY.img (of B132) would have been enough. But, if you've already flashed the B150, now you have to flash the full firmware B132 (BOOT, RECOVERY and SYSTEM).
@breathislava - You are the best! Thank you sooooooooo much <3 I am currently updating to B145. How can I root the phone? Can you help me with this as well? greetz
budanzew said: @breathislava - You are the best! Thank you sooooooooo much <3 I am currently updating to B145. How can I root the phone? Can you help me with this as well? greetz Click to expand... Click to collapse Here's to you! For questions about rooting, ask in the linked thread.
Hi. there are some way for port the sla-l02 (single sim) to SLA-L22 (dual sim), I try to flash the full firmware with adb (SLA-L22) but don't work, i need the dual sim work :l
Help my Motorola G7 Power XT1955-4 is bricked!!
How can I fix this... please anybody help me...
1 or 2 more informations would be a good start. What have you tried, to do? What did you do? What are the symptoms? What have you tried, to fix it? ...
This blank flash unbricked my phone: https://mega.nz/#!5NtCia6a!epk2yLEqnQBKEwT2QbQaOe8-4675pfj76Hs7pC5kbQE
ChampC said: This blank flash unbricked my phone: https://mega.nz/#!5NtCia6a!epk2yLEqnQBKEwT2QbQaOe8-4675pfj76Hs7pC5kbQE Click to expand... Click to collapse Thank u so much. Great ??? I known you in a telegram group. Double thank for your help...
sithuphyo said: Thank u so much. Great I known you in a telegram group. Double thank for your help... Click to expand... Click to collapse My Motorola Moto G7 Power XT1955-4 is dead. I can try to push power button but no switch on. I tried to install twrp andh then a rom, but when i reboot my device...it no power on anymore. how can i solve this trouble? If can't go in fastboot or bootloader, and if i connect my device using usb...it is "Qualcomm HS-USB QDLoader 9008 (COM3)".
Thanks ChampC, Unfortunately it is not working for me. This is the error: [ 3.334] ERROR: do_package()->do_recipe()->do_flash()->flash_simg()->do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->bad response [ 3.334] Check qboot_log.txt for more details [ 3.334] Total time: 3.334s FAILED: qb_flash_singleimage()->do_package()->do_recipe()->do_flash()->flash_simg()->do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->bad response Anyone have an idea?
Ishran said: Thanks ChampC, Unfortunately it is not working for me. This is the error: [ 3.334] ERROR: do_package()->do_recipe()->do_flash()->flash_simg()->do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->bad response [ 3.334] Check qboot_log.txt for more details [ 3.334] Total time: 3.334s FAILED: qb_flash_singleimage()->do_package()->do_recipe()->do_flash()->flash_simg()->do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->bad response Anyone have an idea? Click to expand... Click to collapse From what I been reading some people just keep doing it over and over then the errors will dissaper more u do there is new blank flash out that heard good things on
help please with p30
i bought p30 with frimware ELE-L29 9.1.0.156(C891) .i didnt get any update till now and i tried to upgrade to emui 10 but the phone stock and not loading any help where can i get this firmware or how to update to new one
Seems I have the same situation $ fastboot oem get-build-number ... (bootloader) :ELE-L29 9.1.0.156(C891E6R2P2) Maybe you recovered phone already? Please tell me how?.. At this time have: Your device has failed verification and may not work properly. (1) Your device need to be restored (2) Press Volume Up key up to 3 seconds or Press Power key to enter erecovery to restore your device (3) Your device will stop start if there is no operation trying install 10.1.0.150(C431E22R2P5) from here without success ((( with error: Software install failed! Incompatibility with current version. Please download the correct update package. But what is correct for me?.. Is it possible move from C891 to C431?