How can I fix this...
please anybody help me...
1 or 2 more informations would be a good start. What have you tried, to do? What did you do? What are the symptoms? What have you tried, to fix it? ...
This blank flash unbricked my phone: https://mega.nz/#!5NtCia6a!epk2yLEqnQBKEwT2QbQaOe8-4675pfj76Hs7pC5kbQE
ChampC said:
This blank flash unbricked my phone: https://mega.nz/#!5NtCia6a!epk2yLEqnQBKEwT2QbQaOe8-4675pfj76Hs7pC5kbQE
Click to expand...
Click to collapse
Thank u so much.
Great ???
I known you in a telegram group.
Double thank for your help...
sithuphyo said:
Thank u so much.
Great
I known you in a telegram group.
Double thank for your help...
Click to expand...
Click to collapse
My Motorola Moto G7 Power XT1955-4 is dead. I can try to push power button but no switch on. I tried to install twrp andh then a rom, but when i reboot my device...it no power on anymore. how can i solve this trouble? If can't go in fastboot or bootloader, and if i connect my device using usb...it is "Qualcomm HS-USB QDLoader 9008 (COM3)".
Thanks ChampC,
Unfortunately it is not working for me.
This is the error:
[ 3.334] ERROR: do_package()->do_recipe()->do_flash()->flash_simg()->do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->bad response
[ 3.334] Check qboot_log.txt for more details
[ 3.334] Total time: 3.334s
FAILED: qb_flash_singleimage()->do_package()->do_recipe()->do_flash()->flash_simg()->do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->bad response
Anyone have an idea?
Ishran said:
Thanks ChampC,
Unfortunately it is not working for me.
This is the error:
[ 3.334] ERROR: do_package()->do_recipe()->do_flash()->flash_simg()->do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->bad response
[ 3.334] Check qboot_log.txt for more details
[ 3.334] Total time: 3.334s
FAILED: qb_flash_singleimage()->do_package()->do_recipe()->do_flash()->flash_simg()->do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->bad response
Anyone have an idea?
Click to expand...
Click to collapse
From what I been reading some people just keep doing it over and over then the errors will dissaper more u do there is new blank flash out that heard good things on
Related
please help me!! everytime i start phone or try to flash it, it always gives me this...
AP Fastboot Flash Mode (S)
10.9B(*) )sha-1e9f557, 2013-09-26 12:31:42)
eMMC Info: Size 32GB
Device is LOCKED, Status Code: 0
Battery OK
Transfer Mode:
USB Connected
No Valid PIV block in SP for system
piv validation failed (system)
Fastboot Reason: Boot Failure"
^^^^ ****PROBLEM SOLVED AND ALL IS WELL NOW THANK YOU****
r3m1x said:
please help me!! everytime i start phone or try to flash it, it always gives me this...
AP Fastboot Flash Mode (S)
10.9B(*) )sha-1e9f557, 2013-09-26 12:31:42)
eMMC Info: Size 32GB
Device is LOCKED, Status Code: 0
Battery OK
Transfer Mode:
USB Connected
No Valid PIV block in SP for system
piv validation failed (system)
Fastboot Reason: Boot Failure"
^^^^ ****PROBLEM SOLVED AND ALL IS WELL NOW THANK YOU****
Click to expand...
Click to collapse
Any update on how you fixed it?
I really hate when someone ask for help, find solution and then just write "solved". Completely useless, better don't write anything.
Zeljko1234 said:
I really hate when someone ask for help, find solution and then just write "solved". Completely useless, better don't write anything.
Click to expand...
Click to collapse
I have posted several times but I have not gotten any assistance.
I dont think My issue is documented anywhere so hope someone will help?
http://forum.xda-developers.com/showthread.php?p=51115231
is0lde said:
I have posted several times but I have not gotten any assistance.
I dont think My issue is documented anywhere so hope someone will help?
http://forum.xda-developers.com/showthread.php?p=51115231
Click to expand...
Click to collapse
I still don't see how you solved your problem. Could you please be kind enough to share with community? A lot of people will be very thankful.
Zeljko1234 said:
I still don't see how you solved your problem. Could you please be kind enough to share with community? A lot of people will be very thankful.
Click to expand...
Click to collapse
I think you confuse me with the other user r3m1x.
I have not found a solution - I see your an Admin so I hope you can help me? PLEEEEEASE
I'm not admin but if I found solution I will let you know. Looks like that you need to repartition your internal memory or at least format partitions. Try to search about that.
Hi,
my Moto G is recognized by my "Device Manager" as "QHSUSB_BULK".
Original Moto Drivers are installed. Last Version was a rooted stock Android 5.1 version.
I might need some help here guys...
Moto_G_Lucifer said:
Hi,
my Moto G is recognized by my "Device Manager" as "QHSUSB_BULK".
Original Moto Drivers are installed. Last Version was a rooted stock Android 5.1 version.
I might need some help here guys...
Click to expand...
Click to collapse
Is your phone getting power on???
no I cant enter fastboot neither can I start anything.
I did this: http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
everything works until I run the blankflash.bat - there an error occurs:
FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)
Moto_G_Lucifer said:
no I cant enter fastboot neither can I start anything.
I did this: http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
everything works until I run the blankflash.bat - there an error occurs:
FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)
Click to expand...
Click to collapse
Its hard bricked we all are waiting for 5.1 mbn-cn files now u to joined the group..
Aah crap *ironic high five* :highfive:
Thank you for your message!
HELP! [ 6039Y 4.7 HARD BRICKED ] PHONE IN "Android HS_USB Diagostics 9006" mode!!!
Hi!
Today i need your help!!!!:crying: :crying: :crying:
Today i reboot my Idol 3 6039Y and he enter in Android HS_USB Diagostics 9006 mode and nothing else works!!!!
No boot, recovery or bootloader mode!!!!
I try several qualcomm tools and nothing seems to work! :crying:
What i can do more???!!!
I think this is goodbye...
Thanks in advance ...
:crying:
https://www.leakite.com/2016/06/revised-how-to-unbrick-qualcomm-android.html
Maybe this can help you, I don't understand what is causing that diagnostic
Sent from my unknown using Tapatalk
belkoo said:
https://www.leakite.com/2016/06/revised-how-to-unbrick-qualcomm-android.html
Maybe this can help you, I don't understand what is causing that diagnostic
Sent from my unknown using Tapatalk
Click to expand...
Click to collapse
Thanks! I will check it!
-
These might help
http://www.androidbrick.com/unbrick...-have-the-right-kind-of-rom-qhsusb_dload_edl/
http://www.driverscape.com/download/qualcomm-hs-usb-diagnostics-9006
http://en.miui.com/thread-237832-1-1.html
http://www.appmarsh.com/revised-how-to-unbrick-qualcomm-android-devices/
good luck
k500zm said:
These might help
http://www.androidbrick.com/unbrick...-have-the-right-kind-of-rom-qhsusb_dload_edl/
http://www.driverscape.com/download/qualcomm-hs-usb-diagnostics-9006
http://en.miui.com/thread-237832-1-1.html
http://www.appmarsh.com/revised-how-to-unbrick-qualcomm-android-devices/
good luck
Click to expand...
Click to collapse
Thanks!
.
Any ideas guys????
Did you try the download mode as well? If that shows up, we can go forward, If not, You'll have to send it to repair.
Did you fix it?
Already tried so many roms in my idol that stayed like this too, the mobile upgrade recognized and reinstalled the firmware stock.
really hope you fixed it
Good day,
Please give advice on how to load a functional FW into my Huawei P30. Originally, he had an EMUI 9 phone in it. I tried to upload fw with Android 10 EMUI 10 via USB OTG, fw was uploaded, and after restart, a screen with the following message appeared: Your Device has failed verification and may not work properly. I tried to upload pink fw, what I found on the internet, some of them will be uploaded, some of them will pop up with the error that they cannot be recorded, but the result is still the same. So if someone could advise what I would love to do. I apologize for my English. Thank you
Joukers said:
Good day,
Please give advice on how to load a functional FW into my Huawei P30. Originally, he had an EMUI 9 phone in it. I tried to upload fw with Android 10 EMUI 10 via USB OTG, fw was uploaded, and after restart, a screen with the following message appeared: Your Device has failed verification and may not work properly. I tried to upload pink fw, what I found on the internet, some of them will be uploaded, some of them will pop up with the error that they cannot be recorded, but the result is still the same. So if someone could advise what I would love to do. I apologize for my English. Thank you
Click to expand...
Click to collapse
In order to revive your demo device, you should flash a dload firmware according to your cust ELE-L29 C891 (as i can see from your fastboot oem get-build-number you have ELE-L29 9.1.0.161D C891E6R2P2). Unfortunatelly, there is no dload firmware for your cust atm so you could revive it. Flashing any other dload firmware (from C431/C432/C605 or another ones) will keep your device softbricked .
You have 2 options atm; WAIT for Huawei release of dload firmware for ELE-L29 C891 or change your motherboard at any service center (Huawei's own Service Centers won't do it, because yours is a demo unit and they might even hold on of it, because those demo units are their own property and are not for sale).
Sent from my LIO-L29 using Tapatalk
Joukers said:
Good day,
Please give advice on how to load a functional FW into my Huawei P30. Originally, he had an EMUI 9 phone in it. I tried to upload fw with Android 10 EMUI 10 via USB OTG, fw was uploaded, and after restart, a screen with the following message appeared: Your Device has failed verification and may not work properly. I tried to upload pink fw, what I found on the internet, some of them will be uploaded, some of them will pop up with the error that they cannot be recorded, but the result is still the same. So if someone could advise what I would love to do. I apologize for my English. Thank you
Click to expand...
Click to collapse
Hi, you can go back to the basic version via the box from the computer
mouraj2 said:
Hi, you can go back to the basic version via the box from the computer
Click to expand...
Click to collapse
???
I've just done a similar thing with my p30 lite
---------- Post added at 10:47 AM ---------- Previous post was at 10:16 AM ----------
I've just done a similar thing with my p30 lite, did you find a way to get to USB update?
Contact me
huawei p30 demo version
i tried to update to android 10 , using hisuite proxi.
device flashed recovery files in hi suite, and after restart phone dont have erecovery, dload, dont boot.
it have only fastboot and ofcorce dont allow any flash file in fastboot mode.
any advice?
thanks
(bootloader) ELE-L29
OKAY [ 0.007s]
finished. total time: 0.008s
C:\adb>fastboot getvar vendorcountry
vendorcountry: demo/eea
finished. total time: 0.017s
C:\adb>fastboot oem get-build-number
...
(bootloader) :ELE-L29 9.1.0.156D(C432E4)
OKAY [ 0.009s]
finished. total time: 0.010s
C:\adb>fastboot getvar rescue_enter_recovery
rescue_enter_recovery: start to hisuite mode!
finished. total time: 0.011s
C:\adb>fastboot oem oeminforead-SYSTEM_VERSION
< waiting for any device >
...
FAILED (remote: read oeminfo item failed)
finished. total time: 0.025s
No free way to fix it
mutahharbashir said:
Contact me
Click to expand...
Click to collapse
Hi/////Did you help me delete demo for my Huawei p30 Pro
First I know nothing about doing this android stuff. I plugged my phone in to do a back up and noticed there was as software update from the lenovo moto smart assistant app. During the flash it said error and didnt flash. After which I am left with a phone that will now power on, wont boot in to recovery mode, just black screen no matter what buttons i press or try to charge phone. I have read though threads and installed the drivers and see Qualcomm HS-USB QDLoader 9008 in the device manager. Everything i read says to blank flash. I have ran this program many times and tried a few and they keep having an error. See below. Now My phone did do an OTA update a few weeks back and showed feb security update. It was something like 134-114-7-1 the lenovo app said there was an update something like 134-114-10 I am assuming the lenovo app tried to flash the wrong software and moto support sucks. Anyway is there an updated blank flash.bat From what I have read moto changed something in the bootloader so all the blankflash files arent working. Is there any updates or does anyone know how I can unbrick the phone?? I would need step by step guide if anyone can respond back please. I have tried to read though multiple threads but for the most part no clue what is going on when they say to do something as if half the steps to get to that point one should already know. Complete novice here when it comes to android stuff. Any help would be very much appreciated.
Motorola qboot utility version 3.40
[ 0.000] Opening device: \\.\COM5
[ 0.002] Detecting device
[ 0.006] ...cpu.id = 186 (0xba)
[ 0.006] ...cpu.sn = 1304024024 (0x4db9d3d8)
[ 0.006] Opening singleimage
[ 0.006] Loading package
[ 0.008] ...filename = singleimage.pkg.xml
[ 0.009] Loading programmer
[ 0.010] ...filename = programmer.mbn
[ 0.010] Sending programmer
[ 0.298] Handling things over to programmer
[ 0.300] Identifying CPU version
[ 0.307] Waiting for firehose to get ready
[ 60.897] Waiting for firehose to get ready
[121.262] ...MSM8953 unknown
[121.262] Determining target secure state
[121.263] Waiting for firehose to get ready
[181.443] ...secure = no
[181.469] Initializing storage
[181.472] Waiting for firehose to get ready
[241.566] Configuring device...
[241.580] Waiting for firehose to get ready
[301.742] Waiting for firehose to get ready
[361.849] Waiting for firehose to get ready
[421.985] Waiting for firehose to get ready
[482.625] Initializing storage
[482.629] Waiting for firehose to get ready
[542.736] Configuring device...
[542.742] Waiting for firehose to get ready
[602.869] Waiting for firehose to get ready
[662.994] Waiting for firehose to get ready
[723.131] Waiting for firehose to get ready
[783.260] Waiting for firehose to get ready
[843.387] Configuring device...
[843.390] Waiting for firehose to get ready
[903.528] Waiting for firehose to get ready
[963.662] Waiting for firehose to get ready
[1023.795] Waiting for firehose to get ready
[1083.929] ERROR: do_package()->do_recipe()->do_configure()->buffer_read()->device_read()->IO error
[1083.930] Check qboot_log.txt for more details
[1083.933] Total time: 1083.934s
[1083.935] There were some hiccups in backup and restore.
[1083.937] Please save the following files and see a Bootloader member.
[1083.940] 1) ./qboot_log.txt
[1083.944] 2) ./backup_0x4DB9D3D8_2020-03-23_131920.img
[1083.945]
FAILED: qb_flash_singleimage()->do_package()->do_recipe()->do_configure()->buffer_read()->device_read()->IO error
https://build.lolinet.com/file/blankflash_sdm632_PDOS29.114-134-9.zip
thank you so much
Absolute legend, immediately fixed it, cant thank ya enough lol
theblack334 said:
...lolinet.com/file/blankflash_sdm632_PDOS29.114-134-9....
Click to expand...
Click to collapse
Worked 1st run, fast. Much obliged.
theblack334 said:
https://build.lolinet.com/file/blankflash_sdm632_PDOS29.114-134-9.zip
Click to expand...
Click to collapse
man you are the best!!! I've searched for 2 weeks and found this today and broght my Moto G7 Power back to life instantly...tyvm
KyBoi1128 said:
man you are the best!!! I've searched for 2 weeks and found this today and broght my Moto G7 Power back to life instantly...tyvm
Click to expand...
Click to collapse
The link is down, can someone share the files somewhere else please?
Anyone having errors with blankflash, try the one in this post - it worked for me when the other did not: https://forum.xda-developers.com/showpost.php?p=82206511&postcount=112