Hi
In my country lte only supports b3 and b7 bands and 4g+ works on b3+b7 carrier aggregation .
as you can see in the links below rn7 pro supports b7 and 4g+ :
c.mi.com/thread-2449929-1-0.html
kimovil.com/en/frequency-checker/Ir/redmi-note-7-pro
redmi note 7 pro supports b7 only in China pack , not Indian . My phone's package was Chinese but it came with bootloader unlocked and global rom was installed on it . my phone only supports b3 currently and I can't get 4g+ . (I checked available bands using network signal guru and some other apps )
I followed some guides and tried changing lte bc config in nv ram using qxdm to add b7 but it already had b7 in nv ram settings . So I thought this might be related to firmware or rom , as I was on global rom , so I flashed stock China rom , but nothing has changed . I'm sure my phone has hardware support for b7 , but I don't know what should I do to unlock it . I'm currently using miui11 global rom .
Please help me guys .
Thanks in advance .
did you tried stock china rom with fastboot or recovery?
the phone supports FDD-LTE B1 B2 B3 B4 B5 B7 B8 B20 B28 TDD-LTE B38 B40
Hi,
Code:
Short Off Topic question:
You BL is unlocked by the seller,
Did they unbind their account from your mobile?
Thank you.
Redmi Note 7 Pro | Tapatalk
gursewak.10 said:
did you tried stock china rom with fastboot or recovery?
the phone supports FDD-LTE B1 B2 B3 B4 B5 B7 B8 B20 B28 TDD-LTE B38 B40
Click to expand...
Click to collapse
I flashed stock china rom with fastboot using miflashtool , but only b1 b3 b5 b8 b40 b41 was unlocked on it , just like the global rom .
Zalext said:
Hi,
Code:
Short Off Topic question:
You BL is unlocked by the seller,
Did they unbind their account from your mobile?
Thank you.
Redmi Note 7 Pro | Tapatalk
Click to expand...
Click to collapse
Yes .
shadow2373 said:
Yes .
Click to expand...
Click to collapse
Thank you.
Redmi Note 7 Pro | Tapatalk
Topics ago read that Carrier aggregation is not supported.
Despite seems obvious, did you play toggleing. Preferred Network?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Redmi Note 7 Pro | Tapatalk
yes , It's on lte . just 4g+ is not working , because b7 is locked on my phone .
Even device have good single bands support that doesn't mean it have good Carrier Aggregation support. That's why i have made website cacombos.com what list Carrier Aggregation supports and data is based from modem logs.
Could someone send to me modem log from Redmi Note 7 Pro? I don't have any data from this device so i can't verify Carrier Aggregation support. I have here instructions how you could get log file out: https://mt-tech.fi/en/how-to-get-4g...tions-from-your-android-phone/#Xiaomi_devices
Then just send to me https://cacombos.com/contribute so i can add it to my website. I can now guess it support about same combinations as Redmi Note 7: https://cacombos.com/device?model=M1901F7G but without log i can't verify.
CA not support all Mi devices, cheating mi, but you unlocked band via qxdm
mathan7 said:
CA not support all Mi devices, cheating mi, but you unlocked band via qxdm
Click to expand...
Click to collapse
Most of Xiaomi devices support CA - i have over 30 device Xiaomi device database in cacombos.com confirmed CA support. Just problem is low and middle-cost devices support only CA used in China like 1+3, 3C, 40C and 41C.
If someone have this Redmi Note 7 Pro device, please send to me modem log file so i can add this device to my site. It's very easy from modem log but i just need that.
olkitu said:
Most of Xiaomi devices support CA - i have over 30 device Xiaomi device database in cacombos.com confirmed CA support. Just problem is low and middle-cost devices support only CA used in China like 1+3, 3C, 40C and 41C.
If someone have this Redmi Note 7 Pro device, please send to me modem log file so i can add this device to my site. It's very easy from modem log but i just need that.
Click to expand...
Click to collapse
How to take modem log?
hackermssharma said:
How to take modem log?
Click to expand...
Click to collapse
I have here instruction: https://mt-tech.fi/en/how-to-get-4g...hone/#Method_for_Qualcomm_Devices_before_2020 . You can send log to https://cacombos.com/contribute .
olkitu said:
I have here instruction: https://mt-tech.fi/en/how-to-get-4g...hone/#Method_for_Qualcomm_Devices_before_2020 . You can send log to https://cacombos.com/contribute .
Click to expand...
Click to collapse
Its fqc test and there is no advance option as u mentioned.
hackermssharma said:
Its fqc test and there is no advance option as u mentioned.
Click to expand...
Click to collapse
In my site have 3 different method for Xiaomi: https://mt-tech.fi/en/how-to-get-4g...tions-from-your-android-phone/#Xiaomi_devices - please try old method if work with your device.
Related
Hii,
Can I flash Moto Droid Turbo XT1254 Stock ROM on Moto Turbo XT1225 Indian version ?
I want to use VOLTE for Jio Sim ?
Droid Turbo ROM supports Advanced VOLTE calling features.
So if it possible to flash it on my Turbo ?
Mohitpunjabi said:
Hii,
Can I flash Moto Droid Turbo XT1254 Stock ROM on Moto Turbo XT1225 Indian version ?
I want to use VOLTE for Jio Sim ?
Droid Turbo ROM supports Advanced VOLTE calling features.
So if it possible to flash it on my Turbo ?
Click to expand...
Click to collapse
No. It's XT1254 and XT1225 have different FCC IDs, different radios.
You can cross flash stock XT1250 U.S. Moto Maxx & XT1254 Droid Turbo, as they are the same FCC ID.
You can cross flash stock Moto Maxx XT1225 and Moto Turbo XT1225 as they are the same FCC ID.
Even if you could cross flash stock XT254 firmware over your XT1225, your carrier Jio Sim uses LTE bands 3, 5, and 40. Droid Turbo XT1254 does not have LTE band 5 or 40. You would be limited to LTE band 3 only on your carrier. The XT1225 at least has LTE bands 3 and 5.
Plus, there's no guarantee even a real XT1254 Droid Turbo could get VoLTE on India Jio Sim, even on LTE band 3. It's Verizon's VoLTE the XT1254 is configured for, not another carrier. We can't even get VoLTE for the XT1254 with CM-based custom ROMs.
Over in the Droid Turbo forum are two "stock" XT1225 Brazilian based Marshmallow ROMS which can be flashed onto the Droid Turbo XT1254, but both use @bhb27 custom kernel, as well as CDMA prop build lines. They aren't pure stock.
____________
Here's the XT1225/XT1250 and XT1254 bands and FCC IDs:
The XT1225 and XT1254/XT1250 all share LTE bands 2, 3, 4, 7.
The XT1225 additionally has LTE band 5 and 17.
___________________
FCC ID IHDT56PK2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
____________________
The XT1254/XT1250 instead has LTE band 13 (Verizon LTE band), plus CDMA bands. While it does have some HSPA bands, there's not as many as in the XT1225.
FCC ID IHDT56PK1
______________________
ChazzMatt said:
No. It's XT1254 and XT1225 have different FCC IDs, different radios.
You can cross flash stock XT1250 U.S. Moto Maxx & XT1254 Droid Turbo, as they are the same FCC ID.
You can cross flash stock Moto Maxx XT1225 and Moto Turbo XT1225 as they are the same FCC ID.
Even if you could cross flash stock XT254 firmware over your XT1225, your carrier Jio Sim uses LTE bands 3, 5, and 40. Droid Turbo XT1254 does not have LTE band 5 or 40. You would be limited to LTE band 3 only on your carrier. The XT1225 at least has LTE bands 3 and 5.
Plus, there's no guarantee even a real XT1254 Droid Turbo could get VoLTE on India Jio Sim, even on LTE band 3. It's Verizon's VoLTE the XT1254 is configured for, not another carrier. We can't even get VoLTE for the XT1254 with CM-based custom ROMs.
Over in the Droid Turbo forum are two "stock" XT1225 Brazilian based Marshmallow ROMS which can be flashed onto the Droid Turbo XT1254, but both use @bhb27 custom kernel, as well as CDMA prop build lines. They aren't pure stock.
____________
Here's the XT1225/XT1250 and XT1254 bands and FCC IDs:
The XT1225 and XT1254/XT1250 all share LTE bands 2, 3, 4, 7.
The XT1225 additionally has LTE band 5 and 17.
___________________
FCC ID IHDT56PK2
____________________
The XT1254/XT1250 instead has LTE band 13 (Verizon LTE band), plus CDMA bands. While it does have some HSPA bands, there's not as many as in the XT1225.
FCC ID IHDT56PK1
______________________
Click to expand...
Click to collapse
Hey Chazz,
Thanks for a quick & detailed reply.
Appreciate your work.
The only option left is an update from Moto.
Would request all the members in the forum to please send request to Moto to enable VOLTE feature for our phone.
One more question Chazz,
Does our phone has antenna for band 40 ?
I guess we have the hardware, is just not enabled by Moto.
All Xiaomi users suffer from a single problem, Firmware update. As there are many devices with no one to provide the newest firmware update every single release. And also developers who provide updates to devices may forget or be busy sometimes, so releases are provided later. Here is my simple solution:
Xiaomi Firmware Updater (Mi 9T / Redmi K20)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
A set of various script that automatically generates Xiaomi firmware flashable zip files every MIUI new update!
My scripts download MIUI official ROMs, both Developer and Stable, Global and China, extracts the firmware-update folder, generates firmware flashable zip with auto-written "updater-script", and uploads them automatically to many servers.
The scripts are completely automated, running on a Linux server every six hours.
Note:
Name's will be in the following manner:
fw_davinci_miui_DAVINCI_*.zip is Xiaomi Redmi K20 (davinci) China firmware.
fw_davinci_miui_DAVINCIGlobal_*.zip is Xiaomi Mi 9T (davinci) Global firmware.
fw_davinci_miui_DAVINCIEEAGlobal_*.zip is Xiaomi Mi 9T (davinci) EEA Global firmware.
fw_davinciin_miui_DAVINCIININGlobal_*.zip is Xiaomi Redmi K20 (davinciin) India firmware.
DownloadsYou can get updates always from various mirrors available on the website:
Mi 9T / Redmi K20 Latest Firmware
Mi 9T / Redmi K20 Firmware Archive
Redmi K20 India Latest Firmware
Redmi K20 India Firmware Archive
Frequently Asked Questions:
What is Firmware? Is it a full ROM or OTA package?
Firmware is not a ROM nor OTA Package, it's a set of low-level drivers which helps the operating system do whatever it wants to do. It includes various things like Modem, Bluetooth, Bootloader, DSP and etc.
Why should I update the Firmware?
Firmware is provided from Xiaomi directly, and there are no sources for it to let developers build and edit it on their own like custom ROMs, so if you want to keep your device up to date always update your firmware!
Do I need updating the Firmware If I'm MIUI official or MIUI custom ROM user?
No, MIUI ROMs contain the firmware-update package which I extract and provide here.
What are the supported devices?
All Snapdragon and MTK devices including China-only devices.
Check the full devices list here
How to update firmware?
1- Download the package you want to flash. IT MUST BE NAMED WITH THE SAME CODENAME OF YOUR DEVICE.
2- Flash it using TWRP or any custom recovery. There's no need to wipe/format anything before or after the installation.
How to check the updated firmware?
Usually, the modem gets updated with newer firmware, you can check it in Settings > About > Baseband.
Support or Contact:
Having trouble with firmware files? You can open a new issue on Github repository or just write here in a reply, and we’ll help you sort it out.
Source Code:
- Github
- Main project thread
Donations:
A donation was never necessary, but It's making life easier for me and guarantees paying server costs. My works are free and open source, that cost money, time and many efforts.
XiaomiFirmwareUpdater and MIUIUpdatesTracker scripts are automated, running on a Linux server. If you want these projects to continue and provide the best services to Xiaomi users, you can help me by donating using:
- LiberaPay
- Paypal
- Pateron
XDA:DevDB Information
[Firmware] Xiaomi Mi 9T / Redmi K20 [davinci] [Auto updated daily!], Tool/Utility for the Redmi K20 / Xiaomi Mi 9T
Contributors
yshalsager
Source Code: https://github.com/XiaomiFirmwareUpdater
Version Information
Status: Stable
Current Stable Version: 5
Created 2019-08-07
Last Updated 2019-08-08
Uh wow, thanks man. Keep up the good work.
This project looks very well done and interesting but..
yshalsager said:
Do I need updating the Firmware If I'm MIUI official or custom ROM user?
No, MIUI ROMs contain the firmware-update package which I extract and provide here.
Click to expand...
Click to collapse
This is a bit confusing. I might be misreading this but according to this, who needs to install these firmware updates if they're already provided by official MIUI official and custom ROM's?
UPDATE: Aah it's worded a bit differently on your website:
Q: Do I need updating the Firmware If I’m MIUI official or MIUI custom ROM user?
A: No, MIUI ROMs contain the firmware-update package which I extract and provide here.
Click to expand...
Click to collapse
Sooo... It's for people using custom non-MIUI ROM's like LineageOS, right? Might be a good idea to include this in OP.
I'm sorry, what is the difference between this two versions of MI9T ?
fw_davinci_miui_DAVINCIGlobal_*.zip is Xiaomi Mi 9T (davinci) Global firmware.
fw_davinci_miui_DAVINCIEEAGlobal_*.zip is Xiaomi Mi 9T (davinci) EEA Global firmware.
What'is the EEA ?
I have this one Xiaomi Mi 9T Redmi K20 6 GB 128 GB Global Version Smartphone Snapdragon 730 48MP camera 4000 mAh 6.39 " :
https://fr.aliexpress.com/item/33029746246.html?spm=a2g0s.9042311.0.0.369e6c37N9f2Me
mpatate said:
I'm sorry, what is the difference between this two versions of MI9T ?
fw_davinci_miui_DAVINCIGlobal_*.zip is Xiaomi Mi 9T (davinci) Global firmware.
fw_davinci_miui_DAVINCIEEAGlobal_*.zip is Xiaomi Mi 9T (davinci) EEA Global firmware.
What'is the EEA ?
I have this one Xiaomi Mi 9T Redmi K20 6 GB 128 GB Global Version Smartphone Snapdragon 730 48MP camera 4000 mAh 6.39 " :
https://fr.aliexpress.com/item/33029746246.html?spm=a2g0s.9042311.0.0.369e6c37N9f2Me
Click to expand...
Click to collapse
1st one is the international version
2nd one (EEA) is european version
Schnedi said:
1st one is the international version
2nd one (EEA) is european version
Click to expand...
Click to collapse
Ok thx.
So you think I have the European version ? ( Global)
mpatate said:
Ok thx.
So you think I have the European version ? ( Global)
Click to expand...
Click to collapse
To be sure, go to Settings-> About phone-> MIUI Version
• PFJMIXM = international
• PFJEUXM = european
Schnedi said:
To be sure, go to Settings-> About phone-> MIUI Version
• PFJMIXM = international
• PFJEUXM = european
Click to expand...
Click to collapse
Thanks I will look.. When the phone will be delivered ^^
What is the difference between T9 global and K20 indian version. Does global have no ad recommendation?
Sent from my [device_name] using XDA-Developers Legacy app
Ok I bricked my phone now by trying to update
I check the link in the xda forum to download the latest fw and flashed it. now the phone doesn't boot and in fastboot it doesn't recognize the phone anymore
Is this a hardbrick?
/edit
If I leave the phone on for a few minutes it recognized in adb but it says something like in recovery. If I try to flash then it says corrupted disk image
/edit 2
i managed to get fastboot to work now.
But flashing recovery doesn't do anything.
Is there anyway to get the phone running again?
Schnedi said:
1st one is the international version
2nd one (EEA) is european version
Click to expand...
Click to collapse
Do you also know what the difference in features is between Internation and EEA? Why should I prefer the one over the other?
mailis said:
Do you also know what the difference in features is between Internation and EEA? Why should I prefer the one over the other?
Click to expand...
Click to collapse
The only differences are that the EEA version contains some certificates that the European Union requires, and the version number.
Something similar happens with the versions for Russia and India.
There may be some other small changes. For example, the Chinese version does not contain Widevine L1 support for Netflix, but there's no any "special" feature you find in one of them and not the others.
I've used EEA and Global. They are basically the same.
It's nonesense I know, they should make 1 single ROM for all the world.
Flashed 10.3.9.0 and did a reboot into twrp. now its stuck at the mi logo - flashed twrp again with adb - Cant boot into twrp. Typed "boot twrp.img" into adb - it reboots and stucks at mi logo. wtf
Hi there.
I have a Mi 9T with International stable ROM (10.3.11). Can I install EEA version on my phone?
Thanks in advance and sorry for my bad English.
FroZine said:
Flashed 10.3.9.0 and did a reboot into twrp. now its stuck at the mi logo - flashed twrp again with adb - Cant boot into twrp. Typed "boot twrp.img" into adb - it reboots and stucks at mi logo. wtf
Click to expand...
Click to collapse
This happened to me as well. Recovered by flashing the fastboot rom using the flash tool. You can try saving your files by not flashing user data and installing twrp immediately after flashing. Boot twrp and copy your files.
Hello there
I have an eu rom installed on my phone unlocked custom twrp I want to install globally but what I did didn't try a few twrp I installed rom in one but the phone didn't turn on in the other please don't help how do i install rom
Is there a list for beta firmwares?
Pupet_Master said:
Is there a list for beta firmwares?
Click to expand...
Click to collapse
There's no beta roms for the device yet.
yshalsager said:
There's no beta roms for the device yet.
Click to expand...
Click to collapse
Thanks m8
zerodynamyx said:
This happened to me as well. Recovered by flashing the fastboot rom using the flash tool. You can try saving your files by not flashing user data and installing twrp immediately after flashing. Boot twrp and copy your files.
Click to expand...
Click to collapse
MiFlash tool ends up on antirollback check error. Now what?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Realme GT Neo 2 is a 6.62" phone with a 1080x2400 resolution display. The Qualcomm SM8250-AC Snapdragon 870 5G (7 nm) chipset is paired with 8/12GB of RAM and 128/256GB of storage. The main camera is 64+8+2MP and the selfie camera is 16MP. The battery has a 5000mAh capacity with 65 watts charging speeds.
Realme GT Neo 2 Kernel source:
GitHub - realme-kernel-opensource/realmeGT-Neo2_AndroidR-kernel-source
Contribute to realme-kernel-opensource/realmeGT-Neo2_AndroidR-kernel-source development by creating an account on GitHub.
github.com
Hoping to see amazing development for our device.
Also, I urge everyone who owns the new Realme GT Neo 2 to share their experiences and help other's who face any issue related to the device.
GUIDE :
BAD BATTERY LIFE FIX
Follow the below guide to re-calibrate the battery.
1. Restart the device and use it until it turn itself off completely.
2. Leave the device in switched off state , plug the charger and keep it until it's 100% charged.
3. Switch on the device and make sure it is still at 100% without the electric icon which is shown for charging.
This should resolve the issues of battery backup.
To remove bloatware and system apps follow this amazing article by XDA :
https://www.xda-developers.com/uninstall-carrier-oem-bloatware-without-root-access/amp/
Stable Google Camera port :
Wyroczen: GCam_7.3.018_Wyroczen_SuperRes_v4.0.apk
Download GCam_7.3.018_Wyroczen_SuperRes_v4.0.apk By Wyroczen.
www.celsoazevedo.com
XML file :
Reserved 2
It would be good if we get a new page and starts with BL unlock guides, stock rom flashing .
Ps: my first realme device ...not much knowledge how to unlock, stock flash etc
vygavedha said:
It would be good if we get a new page and starts with BL unlock guides, stock rom flashing .
Ps: my first realme device ...not much knowledge how to unlock, stock flash etc
Click to expand...
Click to collapse
True. I just hope realme releases the sources soon so we can see development for our device.
I've switched from Realme X2 which has good developer support because of which custom roms and rooting was easy on it.
Keeping my fingers crossed to see the same for GT Neo 2.
How to flash firmware golbal version for Realme GT neo 2.
Thank!
hauxd said:
How to flash firmware golbal version for Realme GT neo 2.
Thank!
Click to expand...
Click to collapse
Could you share the link please
Realme GT Neo 2 Global version for india link
Realme GT Neo2 5G Firmware (RMX3370) - Realme Firmware
Download Realme GT Neo2 5G Firmware, RMX3370 Flash File, Latest Stock ROM. flash your phone using realme flashtool or MSM Download tool.
realmefirmware.com
maxs8007 said:
View attachment 5439077
The Realme GT Neo 2 is a 6.62" phone with a 1080x2400 resolution display. The Qualcomm SM8250-AC Snapdragon 870 5G (7 nm) chipset is paired with 8/12GB of RAM and 128/256GB of storage. The main camera is 64+8+2MP and the selfie camera is 16MP. The battery has a 5000mAh capacity with 65 watts charging speeds.
I urge everyone who owns the new Realme GT Neo 2 to share their experiences and help other's who face any issue related to the device.
Mods, kindly make any necessary changes to the thread if any.
Click to expand...
Click to collapse
Please forum for gt neo 2
vygavedha said:
Could you share the link please
Click to expand...
Click to collapse
Realme GT Neo2 5G Firmware (RMX3370) - Realme Firmware
Download Realme GT Neo2 5G Firmware, RMX3370 Flash File, Latest Stock ROM. flash your phone using realme flashtool or MSM Download tool.
realmefirmware.com
Hi, guys is it possible to install Indian firmware on china phone? Do anyone have such kind of experience? Thanks!
zerex222 said:
Hi, guys is it possible to install Indian firmware on china phone? Do anyone have such kind of experience? Thanks!
Click to expand...
Click to collapse
I don't think so it is possible until and unless we have bootloader access and as of now no bootloader unlock is possible on GT neo2.
zerex222 said:
Hi, guys is it possible to install Indian firmware on china phone? Do anyone have such kind of experience? Thanks!
Click to expand...
Click to collapse
I just flashed Chinese gt neo 5g mtk chipset to indian 7x max 5g (same hardware) Im sure you will be able to flash chinese to indian in the future on gt neo 2 once they enable unlock bootloader. Just takes some time. Phone is brand new. Be patient. Too bad gt neo 2 so heavy. The late realme phones were so nice cause the weight was so light.
Seems like a step backwards. No audio 3.5mm jack. They shouldve named it realme x9 not gt neo. Its too expensive to be called gt neo. Its like having a pocophone that costs $400-$500. Gt neo is the best deal in a smart phone hardware performance since le eco le max 2 days.
Finally kernel sources released for our device.
ObeerbongKenobi said:
I just flashed Chinese gt neo 5g mtk chipset to indian 7x max 5g (same hardware) Im sure you will be able to flash chinese to indian in the future on gt neo 2 once they enable unlock bootloader. Just takes some time. Phone is brand new. Be patient. Too bad gt neo 2 so heavy. The late realme phones were so nice cause the weight was so light.
Seems like a step backwards. No audio 3.5mm jack. They shouldve named it realme x9 not gt neo. Its too expensive to be called gt neo. Its like having a pocophone that costs $400-$500. Gt neo is the best deal in a smart phone hardware performance since le eco le max 2 days.
Click to expand...
Click to collapse
Thanks for your sharing, it's really interesting and useful information for me.
Cause i have the GT Neo 2 (Chinese Variant) now and intend to follow the instructions in the link Realmefirmware.com to flash my phone to the Global Version.
I just want to clarify again that when GT neo 2 able to unlocked bootloader, i can follow step by step on the instructions link to flash my phone to Global Rom right?
chanquyen_2005 said:
I just want to clarify again that when GT neo 2 able to unlocked bootloader, i can follow step by step on the instructions link to flash my phone to Global Rom right?
Click to expand...
Click to collapse
Possibly, but at your own risk. Just cross verify once before proceeding once the bootloader unlocking is possible.
Hello
i buy GT Neo2 from Poland, EU global version
Think possible rootes ?
This same method from GT ?
If possible unlock bootlader and rooted, fingerprint stooped working ?
onken said:
Hello
i buy GT Neo2 from Poland, EU global version
Think possible rootes ?
This same method from GT ?
If possible unlock bootlader and rooted, fingerprint stooped working ?
Click to expand...
Click to collapse
There is no update as of yet from realme about bootloader unlocking. However, few Asian users were able to get their deep testing requests approved but most of the user's of other region weren't so lucky. They still get notified within app that the device isn't supported for deep testing. Hope they start approving it for all regions soon.
Once we're able to unlock the bootloader we can easily root the device. Yes the rooting process my be similar or same as GT.
To bad
If i recive eu software, change to indian not change to possible to deep mode ?
onken said:
To bad
If i recive eu software, change to indian not change to possible to deep mode ?
Click to expand...
Click to collapse
Yes, you can still unlock bootloader on eu software once they start approving deep testing requests for all regions.
Hello
OnePlus 8 2017 TMobile unlocked
My question
any solution to enable n78 band which work in Saudi Arabia and Kuwait ..etc.
Does convert from TMobile rom to global rom will enable n78
This is in all OnePlus 8 series 8t 8 pro 8 which TMobile branded.
Can anyone tell me if these TMobile works in n78 5G bandl
Anybody here ?
TechForEver said:
Anybody here ?
Click to expand...
Click to collapse
Any luck?
Unfortunately it's hardware locked. Even tho the modem support that band
I will be using a paid software to unlock bootloader on your Xiaomi Mediatek
Device but for the XDA community it is absolutely free.
This tool uses the mtk client exploit to unlock bootloader without any wait
times so big thanks to the mtk client exploit developer team and others.
The below list is not exhaustive and can be used on any MTK based phone
given that the software supports it.
Warnings:
1. Always backup your device before you unlock it.
2. You would be responsible for outcomes due to failed bootloader unlocking.
3. PLEASE DO NOT REQUEST HERE FOR QUALCOMM BASED [Xiaomi] DEVICES or
any other manufacturer.
Please comment down your exact model number and device codename.
YOUR DEVICE MUST SHOW AS MTK USB PORT IN DEVICE MANAGER.
Requirements:
MTK USB DRIVERS
LIB USB FILTER
Xiaomi MediaTek
- List of Supported Models :
- Redmi Note 11 Pro [ pissarro ]
- Redmi Note 11 Pro+ [ pissarro ]
- Redmi Note 11 Pro 4G [ viva ]
- Redmi K40 Gaming [ ares ]
- POCO F3 GT [ ares ]
- Redmi Note 11E [ light ]
- Redmi Note 11R [ light ]
- Redmi 11 Prime 5G [ light ]
- Redmi 10 5G [ light ]
- POCO M4 5G [ light ] [thunder]
- Redmi Note 12 Pro [ruby]
View attachment 5927099
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Redmi Note 11 Pro+ 5G
Model: 21091116UG
Codename : pissarropro
MDo94 said:
Redmi Note 11 Pro+ 5G
Model: 21091116UG
Codename : pissarropro
Click to expand...
Click to collapse
Please download and install MTK Drivers and LIB USB from the above post so that your phone can be connected in BROM mode to your computer.
Also download TeamViewer or Anydesk so that I can unlock your phone's Bootloader.
Please don't share your TeamViewer or Anydesk ID here in the comments, you can PM me the ID.
Marketname: Redmi Note 12 Pro+ 5G
Codename: rubypro
Model name: 22101316UG
Its not ruby but i m flashing same firmware, i backuped all partitions, we will tray unlock proccess, please contact to telegram, my name enigmaticq
mvikrant97 said:
I will be using a paid software to unlock bootloader on your Xiaomi Mediatek
Device but for the XDA community it is absolutely free.
This tool uses the mtk client exploit to unlock bootloader without any wait
times so big thanks to the mtk client exploit developer team and others.
The below list is not exhaustive and can be used on any MTK based phone
given that the software supports it.
Warnings:
1. Always backup your device before you unlock it.
2. You would be responsible for outcomes due to failed bootloader unlocking.
3. PLEASE DO NOT REQUEST HERE FOR QUALCOMM BASED [Xiaomi] DEVICES or
any other manufacturer.
Please comment down your exact model number and device codename.
YOUR DEVICE MUST SHOW AS MTK USB PORT IN DEVICE MANAGER.
Requirements:
MTK USB DRIVERS
LIB USB FILTER
Xiaomi MediaTek
- List of Supported Models :
- Redmi Note 11 Pro [ pissarro ]
- Redmi Note 11 Pro+ [ pissarro ]
- Redmi Note 11 Pro 4G [ viva ]
- Redmi K40 Gaming [ ares ]
- POCO F3 GT [ ares ]
- Redmi Note 11E [ light ]
- Redmi Note 11R [ light ]
- Redmi 11 Prime 5G [ light ]
- Redmi 10 5G [ light ]
- POCO M4 5G [ light ] [thunder]
- Redmi Note 12 Pro [ruby]
View attachment 5927099
View attachment 5927107
Click to expand...
Click to collapse
Marketname: Redmi Note 12 Pro+ 5G
Codename: rubypro
Model name: 22101316UG
Its not ruby but i m flashing same firmware, i backuped all partitions, we will tray now unlock proccess, please send pm or contact to telegram, my name enigmaticq