device :- vibe x3
i tried to install stock rom via QFIL but it says "no port available" when i try to connect phone via USB. i have usb driver installed. but it is not detecting the phone and after switch off the phone i tried it to connect to the pc and screen is on infinite boot loop maybe thats why its not recognising it . i have stock recovery installed. it there any solution?
Related
I have an acer icoina a510 I unlocked the bootloader , installed team win recovery i booted in it then i turned the device of and after that i am stuck on the boot logo . When i try to enter the recovery nothing happens it only vibrates. When i connect it to a pc it says that the device is unknown. any advice on what i can do to fix it otherwise i am going to be dead
Edit:
Now it seems that it detects it in device manager but still i am stuck i will try to flash recovery and write if i have progress
Edit2:
Now it is detected as an mtp device strange
Edit3:
Forgot to tell you that the message at the top is:
Bootloader version JB-d0ca683(Unlock Mode)
and device manager recognizes the device as mtp an only sometimes as acer iconia tab a510 but nothing more.
Edit4:
So when i connect it it first says that it is an acer iconia tab a510 but after 2 seconds it changes to a mtp device. I have also installed the drivers from the official acer site. They are USB_Acer_1.0_A40I .
And this only changed mtp device from mtp usb device. I have read here on the forums how to try to enter fastboot but no luck. I can boot in the bootloader but i found out how to enter apx mode. for anyone wondering it is holding both vol down and vol up and power then your windows will recodnise it but don't let go just now because it will stop hold it for around 5 or 10 seconds and it will stay in it. But there are no drivers for it.
Edit5:
So now i am able to enter fastboot and tried to fkash a custom recovery image it said that it is flashed but nothing happened. Is there any way to flash a rom via flashtool?
I Recently Bought New Lenovo A7000 I was Trying To Install Twrp Recovery In Sp Flash Tool I Accidently Did Formatall+download It Deleted Every thing Including boot I Have Installed A Rom For My Phone All Mtk Drivers Are Installed Like Vcom,Mtk.
I Have Tried Again And Again But Flash Tool Cant Detect My Phone then I Restarted My Pc Remove Phone Battery And Reinstalled Again Then I Opened Sp Flash Tool using administer which Came With my rom i load my rom into spft, usb checkup and emmc checkup was ticked i dont know should i tick of untick i clicked download button unticking preloader and connected phone not detected 1st time not 2nd time not i have tried again and again i dont know which buttons should i press it detected my phone it installed everything but at 100 complete it shows error when checking da dl that error was like security secure usb dl failed i dont know what should i do i again connected it shows same error should i untick checkup Is my phone HARDBRICKED Any Fix Please Help?
Most lenovo phones have meta mode which is used to flash ROMs without preloader.so all you got to do is
1)get your stock ROM
2)load scatter.txt in sp flashtool
3)select either firmware upgrade/download only
4)click download and then connect your powered off phone via usb in meta mode
Note:connecting in meta mode is dffrt for dffrt phones.
Mine is holding vol+ button while connecting,find out how to connect your phone or try some button combinations.
My Lenovo A316i does not turn on anymore but can still be recognized by the computer. At first, my phone can be powered on but restarts at the logo. I made it worked using SP Flash Tool and I installed TWRP. The problem occured after I install an updated.zip folder through TWRP without Wiping. The phone at this stage was stocked at the logo. Then I tried the "Format all & Download" option in the SP Flash Tool. Now it does not turn on, but can still be recognized by the computer.
I already followed the steps from these videos
https://www.youtube.com/watch?v=A3TmXtOA0IA
https://www.youtube.com/watch?v=hKYH7gkvrvY
Try to flash with stock rom dude
I already did but it's still not working.
Are u able to go to TWRP recovery mode
No because it's not turning on anymore.
Try to use button combination for your phone model
1.my j701f is not detected on pc, I installed the USB driver but it still error.
2. in mode twrp, if I flashing rom its always restart on logo Samsung.
please help me
Hello guys,
I have an old phone Infinix note 3 X601 which I haven't used since years, I got it out today and after turning it on I did a reset factory, and after the reset factory was done the phone won't bootup anymore when I turn it on it goes to the boot loader screen and give me this message at the bottom "[!] Data couldn't be decrypted and mounted. Please restart recovery from Power Menu" and when I press restart recovery nothing happens it go back to the same screen, but this is not the official boot loader because back then when I was using it I rooted it and installed Carliv Touch Recovery boatload instead of the official and also I had a custom Rom installed.
Can someone help me, please ?
Also, I tried to flash another rom but when I open SP flash tool it seems that it isn't detecting the phone no matter what I do, tried to install media tek driver auto installer and CDC drivers but nothing happened
I'm using windows 10 latest update
attached a photo of the screen I get when I turn on the phone
thanks in advance.
Have installed latest USB drivers?
Download Infinix USB Driver for Windows (Latest Driver)
Download the latest and original Infinix USB Driver to connect any Infinix Smartphone and Tablets to the Windows Computer quickly.
androidmtk.com
jwoegerbauer said:
Have installed latest USB drivers?
Download Infinix USB Driver for Windows (Latest Driver)
Download the latest and original Infinix USB Driver to connect any Infinix Smartphone and Tablets to the Windows Computer quickly.
androidmtk.com
Click to expand...
Click to collapse
yes I did but still not working
ahmwwd said:
Hello guys,
I have an old phone Infinix note 3 X601 which I haven't used since years, I got it out today and after turning it on I did a reset factory, and after the reset factory was done the phone won't bootup anymore when I turn it on it goes to the boot loader screen and give me this message at the bottom "[!] Data couldn't be decrypted and mounted. Please restart recovery from Power Menu" and when I press restart recovery nothing happens it go back to the same screen, but this is not the official boot loader because back then when I was using it I rooted it and installed Carliv Touch Recovery boatload instead of the official and also I had a custom Rom installed.
Can someone help me, please ?
Also, I tried to flash another rom but when I open SP flash tool it seems that it isn't detecting the phone no matter what I do, tried to install media tek driver auto installer and CDC drivers but nothing happened
I'm using windows 10 latest update
attached a photo of the screen I get when I turn on the phone
thanks in advance.
Click to expand...
Click to collapse
Flash it using SP flash tool
mvikrant97 said:
Flash it using SP flash tool
Click to expand...
Click to collapse
I'm using SP flash tool but the tool doesn't recognize that the phone is connected to the pc
ahmwwd said:
I'm using SP flash tool but the tool doesn't recognize that the phone is connected to the pc
Click to expand...
Click to collapse
Please setup MTK drivers first and add filter using lib usb.